CS Paper Radar

Möbius Reparametrization of Multiport-Network Models of PIN-Diode-Programmable Metasurfaces for Accurate Low-Order Neumann Approximations

Philipp del Hougne

eess.SP physics.app-ph ·submitted 2026-09-29 13:31 UTC · v1

Abstract

Accurate models of programmable metasurfaces based on multiport-network theory (MNT) account for mutual coupling (MC) through a configuration-dependent matrix inversion. The latter's high computational cost during gradient-based optimization (GBO) can be alleviated via a finite-order Neumann approximation. We show that the accuracy of this approximation depends strongly on the (tacitly) chosen MNT parametrization. For 1-bit-programmable meta-elements (e.g., meta-elements based on PIN diodes), we identify a closed-form Möbius reparametrization that depends only on the meta-element's two load states and requires neither training data nor numerical optimization. For an experimentally estimated proxy MNT model of a fabricated 96-element 19-GHz dynamic metasurface antenna with strong MC, a second-order Neumann approximation with our reparametrization achieves forward and control-gradient accuracies of 21.68 and 21.70 dB, respectively. Relative to the full proxy MNT, it reduces the runtime of a combined forward and control-gradient evaluation by a third and the saved-tensor memory by a factor of ten. In a prototypical GBO problem of end-to-end optimization for DMA-based scene classification, it achieves 94.97% test accuracy vs. 95.57% with the full model. We further note that MC-strength metrics and MC-unaware benchmarks should be parametrization-invariant, motivating, for instance, definitions based on the best directly fitted zeroth-order model.

Comment
6 pages with 3 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Diffusion-Based Inverse Design of Dielectric Resonator Metasurfaces for Shaping Smart Electromagnetic Environments

cs.LG physics.app-phphysics.comp-ph ·2026-08-30 ·M. Tsukerman, K. Grotov, D. Vovchuk, P. Ginzburg
similarity 0.59
Abstract

Future wireless systems are expected to transform the surrounding space from a passive propagation medium into a smart electromagnetic environment, where engineered surfaces control wave propagation, support wireless sensing, and create programmable electromagnetic fingerprints. A key challenge in realizing this vision is the inverse design of metasurfaces for tailored electromagnetic propagation. While forward analysis evaluates the response of a known geometry, the inverse task starts from a prescribed scattering signature and seeks a physically realizable structure that produces it. This inverse task is inherently nonlinear and often high-dimensional, while candidate solutions may be non-unique and provide no direct indication of practical realizability. Here, we introduce a conditional diffusion framework for inverse design of dielectric resonator metasurfaces from target angular scattering patterns. Trained on T-matrix simulated geometry-response pairs, the model learns a conditional distribution of geometries instead of a deterministic mapping, enabling multiple candidate designs for the ill-posed inverse problem. The best generated metasurface achieves a mean percentage error of 1.39%, outperforming CMA-ES optimization (4.1% after 10 h) while requiring only about one minute for after-training inference. The model also produces lower error distributions than deterministic neural baselines for out-of-distribution spectra, highlighting the potential of diffusion models for efficient metasurface design.

0.28

Wave-Domain Semantic Equalization Using a Practical Dynamic Metasurface Antenna with Strong Mutual Coupling

eess.SP physics.app-ph ·2026-09-27 ·Yassine Sghaier, Emilio Calvanese Strinati, Philipp del Hougne
similarity 0.58
Abstract · 5 pages with 3 figures

Semantic mismatch between independently trained AI-native agents in heterogeneous networks can impair semantic communications. Hybrid analog-digital semantic equalization can align the incompatible latent representations without retraining the semantic transceivers. We study a practical realization of this approach based on a fabricated dynamic metasurface antenna (DMA), an emerging low-cost, low-power, ultracompact technology for hybrid analog-digital beamforming. We model the DMA-assisted channel using multiport-network theory (MNT), accounting for mutual coupling (MC), structural scattering, and binary lossy tuning states. We use the experimentally estimated MNT parameters of our fabricated 19-GHz DMA prototype with strong MC. We jointly optimize digital pre- and post-equalizers and the DMA at a reference receiver geometry for latent-space alignment, then freeze the digital stages and adapt only the DMA after receiver motion. In our CIFAR-10 image-classification task at the receiver, the jointly optimized system achieves 94.5% accuracy, while DMA-only adaptation restores a median accuracy of 90.3% after receiver motion. Our semantic-aware wave-domain adaptation substantially outperforms semantic-unaware benchmarks. We further observe that varying the DMA configuration across channel uses provides little additional benefit for either semantic-aware or semantic-unaware optimization.

0.37

Stacked Fluid Metasurfaces: Mutual-Coupling-Aware Modeling and Optimization

eess.SP ·2026-09-25 ·Giovanni Iacovelli, Chandan Kumar Sheemar, Symeon Chatzinotas
similarity 0.57
Abstract

Stacked intelligent metasurfaces process the transmitted field layer by layer, and fluid antennas make the position of every radiator a design variable. Combined, they pack radiators at sub-wavelength spacings within and across layers, where mutual coupling governs the physics that current models omit. This paper develops a coupling-consistent model of a fluid transmit layer illuminating a stack of passive fluid beyond-diagonal layers. The multiport impedance matrix of any port constellation is shown to be the impedance kernel sampled at the three-dimensional separations, in one closed spherical-Hankel form whose in-plane restriction is intra-layer coupling and whose axial restriction replaces the scalar Rayleigh--Sommerfeld propagator. Only the transmitter is driven: the layer currents are induced, and the familiar cascade is the single-pass limit of one matrix inversion. In the wavenumber domain the light circle still separates radiation from reaction, now with a plane-wave propagator attached, every Fourier mode sees a transmission line loaded by the layers, and an efficiency identity shows that what the stack costs in efficiency is set by its total induced-current norm, not by its layer count. Because the load is never assumed layer-diagonal, interconnections may join atoms on different sheets, and vertical networks repeated at every site are spectrally local. Alternating optimization designs precoders, positions, and loads with closed-form gradients. Numerically, fluid ports on a $λ/8$ grid perform within a few per cent of continuously movable ones, while a design based on the conventional cascade model can do worse than open-circuiting the stack.

0.21

Physically Consistent Channel Modeling and Signal Processing for Reconfigurable Wireless Systems

eess.SP ·2026-08-17 ·Ahmad Dkhan, Simon Tarboush, Hadi Sarieddeen, Robert W. Heath, Hakan Bagci +1 more
similarity 0.57
Abstract

Reconfigurable antennas are increasingly integrated into multi-antenna communication systems to exploit large apertures while reducing the hardware complexity, energy consumption, and implementation costs of classical massive arrays. Their reconfigurable electromagnetic (EM) properties, including dynamically varying radiation patterns and state-dependent mutual coupling, challenge the fixed-antenna and decoupled-port assumptions of conventional channel models. This motivates a physically consistent framework connecting Maxwell's equations, circuit theory, and information theory. In this tutorial, we develop a unified framework spanning three coupled dimensions: (i) reconfigurable antenna and transceiver architectures, (ii) physically consistent channel modeling, and (iii) physically consistent signal processing. We first establish a taxonomy covering tunable antennas, reconfigurable transceivers, and emerging array architectures, highlighting their reconfiguration mechanisms and hardware-performance trade-offs. We then develop modeling approaches based on Maxwell's equations, wavenumber-domain representations, multiport network theory, and computational electromagnetics, and use them to construct end-to-end channel and noise models that capture near-field propagation, mutual coupling, and circuit-level impairments. Building on these models, we examine architecture-aware channel estimation, beamforming, data detection, and channel decoding, emphasizing how physical structure reshapes algorithm design and performance-complexity trade-offs. Overall, the tutorial treats physical architecture, channel and noise models, and communication algorithms as coupled components of an end-to-end design, providing a unified foundation for physically consistent reconfigurable wireless systems.

0.34

Dynamic Metasurface Antennas: From Programmable Microwave Hardware to Next-Generation Wireless Systems

eess.SP ·2026-09-24 ·Abdul Jabbar, William Whittow
similarity 0.56
Abstract

As wireless systems evolve toward 6G and beyond, antenna apertures are increasingly expected to become more programmable, multifunctional, and responsive to diverse communication, sensing, and imaging requirements. Dynamic metasurface antennas (DMAs) offer a promising hardware pathway toward this vision by integrating electronically addressable metamaterial elements within microwave and millimeter-wave (mmWave) radiating apertures. Unlike conventional phased arrays relying on dedicated phase-shifting networks, DMAs manipulate guided waves in microwave structures through electronically controlled resonant elements. In this way, DMAs offer phase-shifter-less beam-steering, multibeam radiation, and programmable wavefront control. This article explores state-of-the-art DMA technology from a microwave-engineering perspective, spanning guided-wave excitation, reconfigurable resonant meta-elements, microwave tuning technologies, RF-digital integration, and FPGA-controlled beamforming. Closely related electronically steered metasurface antenna architectures are also discussed within a unified microwave-hardware framework. Recent advances illustrating how guided-wave DMA hardware and high-speed electronics facilitate programmable communication, sensing, imaging, and space-time functionalities are reviewed. Key microwave design challenges toward wideband, scalable, and highly integrated DMA apertures are highlighted. Finally, emerging opportunities in satellite communications, near-field connectivity, fixed wireless access, wave-domain computing, and integrated wireless functionalities are explored as future directions for DMA technology. This article provides a unified microwave engineering perspective on the design, practical implementation, and emerging capabilities of DMAs as programmable front-ends for next-generation wireless systems.

0.26

To Stack or Not to Stack? Jacobian Conditioning and the Benefits of Depth in Metasurface-Based Linear Transformation Synthesis

eess.SP ·2026-10-14 ·Andrea Abrardo, Andrea Garulli
similarity 0.55
Abstract · 12 pages, 8 figures, journal paper

This paper investigates when and why stacking programmable metasurfaces into Stacked Intelligent Metasurfaces (SIMs) improves linear transformation synthesis at a fixed phase-control budget. The analysis shows that algebraic Jacobian rank alone is insufficient to characterize practical synthesis, which also depends on the strength and balance of the sensitivity directions generated by the available controls. A layer-resolved analysis of the cascade model explains how inter-layer propagation can generate complementary sensitivity directions. The relevance of this mechanism is then assessed using an S-parameter multiport model that includes electromagnetic coupling and multiple scattering. Numerical results in near- and far-field sensing scenarios show that distributing the same control resources across multiple layers can strengthen weak transformation directions, improve Jacobian conditioning, and substantially enhance synthesis accuracy. These findings explain why increasing depth can offer benefits that are not obtained by simply enlarging a single programmable surface, and identify layer complementarity and Jacobian conditioning as useful criteria for SIM architecture design.

0.19

Bounds on Shaping Partially Coherent Microwaves with Programmable Scattering Systems

eess.SP physics.app-ph ·2026-08-31 ·Philipp del Hougne
similarity 0.54
Abstract · 15 pages with 3 figures

We derive bounds on manipulating partially coherent microwaves with programmable scattering systems. We first consider the concentration of power from a partially coherent input into a single output port and derive a prototype-aware bound by combining multiport network theory (MNT) with semidefinite relaxation (SDR). We then address general coherency-matrix synthesis, deriving architecture-independent bounds on fidelity and useful strength, prototype-specific scalar refinements thereof, and fully prototype-aware SDR bounds on the useful-strength--fidelity Pareto frontier. The prototype-aware formulations account for mutual coupling, loss, discrete tunability, and static scattering. We evaluate the bounds on four experimental RIS-parametrized MIMO systems with up to 100 1-bit-programmable elements, using proxy-MNT models estimated from measurements. The resulting bounds are generally tight compared with feasible discrete-optimization outcomes. Interestingly, for coherency synthesis, the simpler bounds can in some cases be tighter than the fully prototype-aware bounds, highlighting their complementarity. Our results provide certified limits for wave-domain processing and harvesting of partially coherent microwaves.

0.48

On the Universal Approximation Capability of Stacked Intelligent Metasurfaces

eess.SP ·2026-09-28 ·Davide Dardari
similarity 0.53
Abstract · Submitted to ICC 2027

Wave-domain processing is an emerging paradigm in which signal-processing operations are partially shifted from the digital domain to the electromagnetic (EM) domain to reduce complexity, energy consumption, and latency in next-generation wireless systems. Stacked intelligent metasurfaces (SIMs) are a promising technology for wave manipulation. Although numerous studies have addressed the numerical design of SIMs for specific tasks, no theoretical results have yet established whether a prescribed SIM architecture can approximate an arbitrary complex linear mapping, i.e., whether it possesses a universal approximation capability. To address this question, this paper establishes fundamental theorems that provide necessary and sufficient closed-form conditions under which a given SIM architecture can serve as a universal approximator of complex linear transformations.

0.23