CS Paper Radar

IMU-Centric Moving Horizon Estimation for Lateral Dynamics Estimation Across Vehicles and Grip Conditions

Seuffo Akouan ha Ngoune, Alessandro Toschi, Paolo Burgio, Marko Bertogna

eess.SY cs.RO ·submitted 2026-09-09 14:05 UTC · v2
publishedcode/data

Abstract

Accurate estimation of lateral vehicle dynamics near the adhesion limit is important for stability control and high-performance driving, but lateral velocity is rarely measured directly because sensors such as optical sensors are costly. This paper presents an inertial measurement unit (IMU)-centric Moving Horizon Estimation framework that reconstructs lateral velocity using standard onboard signals, without relying on exteroceptive odometry or detailed tire-parameter tuning. Experimental validation on human-driven sports cars and an autonomous open-wheel race car across tracks, maneuvers, and conditions demonstrates accurate and robust lateral velocity and lateral acceleration estimates. The proposed framework is available at https://github.com/Aseuffo/IMU-Centric-MHE

Comment
Accepted at the 29th IEEE International Conference on Intelligent Transportation Systems (ITSC 2026). 8 pages, 6 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Reduced Order Observers for Monocular Visual Inertial Odometry

eess.SY ·2026-09-22 ·Amel Abi, Mouaad Boughellaba, Miaomiao Wang, Abdelhamid Tayebi
similarity 0.60
Abstract

This work develops a reduced order observer framework of monocular visual-inertial odometry (VIO). The key idea consists in considering the gravity vector in the body-frame as an additional state and constructing an appropriate output that relates the monocular bearing measurements and their time derivatives to the body-frame velocity. This eliminates the need for the estimation of the landmark positions, leading to a six-dimensional linear time-varying (LTV) observer for the body-frame velocity and gravity, endowed with uniform global exponential stability guarantees. These estimates are subsequently used to recover the orientation almost globally, up to an unknown constant yaw offset, and the position up to an unknown constant translation. The mixed-bearing framework is further extended to account for the inertial measurement unit (IMU) biases, yielding a twelve-dimensional LTV observer endowed with local exponential stability guarantees. Numerical simulations are provided to illustrate the effectiveness of the proposed observers.

0.15

Observability Analysis and Online Calibration of Visual-Inertial-Wheel Odometry for 4WIS4WID Mobile Robots

cs.RO ·2026-09-29 ·Branimir Ćaran, Vladimir Milić, Bojan Šekoranja, Bojan Jerbić
similarity 0.59
Abstract · This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may…

In this paper, we present a visual-inertial-wheel odometry (VIWO) framework with online calibration for four-wheel independently steered and driven (4WIS4WID) mobile robots. We derive a 2D odometry model directly from the four driving velocities and steering angles, using both the longitudinal rolling constraints and the lateral no-slip constraints of all wheels. A preintegration model and analytical Jacobians are developed for efficient filtering and calibration. An observability analysis of the linearized VIWO system shows that a drive-only model makes all steering offsets unobservable, whereas the proposed redundant model restores their observability. The analysis also identifies four standard VINS unobservable directions and three additional directions associated with the arbitrary placement of the odometry reference frame. Furthermore, we characterize several degenerate motions, including zero yaw rate, constant steering, and a non-rolling wheel, and derive the corresponding excitation conditions for the thirteen wheel intrinsics that remain after fixing the odometry frame reference. The performance of the proposed system has been demonstrated in both simulation and real-world experiments on a 4WIS4WID mobile robot.

0.21

Observability Analysis of Joint Steering and Extrinsic Calibration

cs.RO ·2026-08-28 ·Subodh Mishra
similarity 0.58
Abstract

This technical report studies the local weak observability of a planar bicycle-model vehicle when vehicle pose, planar LiDAR extrinsic calibration, and steering-angle bias are estimated jointly. A Lie-derivative-based nonlinear observability analysis is used to examine stationary, straight-line, constant-curvature, and combined straight-plus-arc motion. The resulting observability matrices and nullspaces describe how pose, LiDAR translation and yaw offsets, and steering bias become coupled under different motion primitives. Stationary motion and individual motion primitives retain unobservable directions, whereas the combination of straight and curved motion removes the identified degeneracies and yields full local weak observability of the seven-state system. The analysis provides a theoretical basis for selecting calibration trajectories that sufficiently excite both steering and sensor-extrinsic parameters.

0.24

Trajectory CPHD Filtering for Multiple Turning Vehicles With Decoupled Orientation and Axial-Scale Estimation

eess.SP ·2026-09-15 ·Yunhe Cao, Yu Wan, Yuanhao Cheng, Tat-Soon Yeo, Jie Fu
similarity 0.58
Abstract · 32 pages in total, including a 15-page main article and 17 pages of supplementary material; 7 figures and 5 tables in the main article

Reliable estimation of vehicle orientation, centroid, and footprint is important for representing road-user occupancy during vehicle turns at intersections and other common road maneuvers. During a turn, the vehicle orientation and direction of motion may differ, and coupling the orientation with the axial scales can degrade both orientation and extent estimates. This paper proposes a trajectory cardinalized probability hypothesis density filter with a Decoupled Orientation and Axial-Scale Estimation (DOAM) model for multiple-vehicle tracking. The model represents the kinematic, orientation, and squared semi-axis-length states separately within each trajectory component, reducing the mutual interference between orientation variation and scale estimation without introducing an additional interacting multiple-model structure. A structured coordinate-ascent variational inference recursion jointly updates these state sequences and the measurement-source variables. The trajectory-component likelihood and weight update associated with the decoupled representation are derived while retaining the standard cardinality recursion. A fixed-lag trajectory implementation further uses current measurements to correct historical states within the smoothing window. Evaluation with signalized-intersection simulations and real onboard LiDAR measurements shows improved estimation of vehicle orientation, centroid, and extent, particularly during turns. The resulting vehicle-state and footprint estimates provide information for road-user occupancy perception and subsequent collision-risk assessment and motion planning.

0.21

Inertial Steering and Motion Prediction of Tracked Vehicles on Low-Adherence Surfaces

cs.RO eess.SY ·2026-10-28 ·Mathis Turgeon-Roy, Mohamed Ounally, Veronica Vannini, Olivier Roy, François Pomerleau
similarity 0.58
Abstract

Tracked vehicles are widely used in off-road applications, but their conventional motion models often rely on no-slip assumptions that become inaccurate on low-adherence surfaces. Rather than treating inertial effects arising from slip as a disturbance to be minimized, this work investigates how inertial effects arising from a moving mass can be deliberately exploited for steering on low-friction surfaces. A dynamic model for an articulated tracked vehicle with a passive trailer is developed, allowing inertial effects from trailer motion to be captured. The approach is experimentally evaluated on ice, where our dynamic model outperforms the kinematic baseline. We also propose a mixed dynamic-kinematic model to adapt predictions to both surface and situation by exploiting predictions from both methods. Finally, we demonstrate inertial steering on a mono-track vehicle without a conventional steering mechanism, showing that controlled movements of an internal mass can generate turning motion on ice. The resulting behavior can be predicted using the proposed dynamic model by representing the internal mass as a frictionless trailer, revealing the analogous dynamics between the two configurations. These results demonstrate the feasibility of inertial steering as an alternative steering mechanism for tracked vehicles operating in low-adherence environments.

0.21

Online Joint Calibration of Steering Offset and Planar LiDAR Extrinsics for Wheeled Mobile Robots

cs.RO ·2026-08-27 ·Subodh Mishra, Arindam Dhar, Suprotim Majumdar, Naveen Arulselvan
similarity 0.57
Abstract

Accurate steering sensing and LiDAR-to-vehicle extrinsics are crucial for reliable path tracking in warehouse mobile robots (WMRs); miscalibration often leads to snaking, weaving, and elevated cross-track error (CTE). In practice, steering ``zero'' is commonly set manually (e.g., eyeballing straightness via a PS4 joystick), while LiDAR extrinsics are assumed from CAD and may drift after maintenance. Such static, manual procedures frequently cause miscalibration in safety-critical environments. This paper presents an Extended Kalman Filter (EKF)--based method for online estimation of steering offset and planar LiDAR extrinsics within a bicycle-kinematics model, providing a principled alternative to manual calibration. Experiments on real datasets show that correcting steering offset reduces CTE substantially, validating the effectiveness of the proposed approach.

0.29

A Geometric Observer for Visual-Inertial Odometry using Optical-Flow Constraints

eess.SY cs.RO ·2026-11-15 ·Tarek Bouazza, Soulaimane Berkane, Tarek Hamel
similarity 0.57
Abstract · 12 pages, 6 figures. Submitted to ECC 2027

This paper presents a geometric observer for monocular visual-inertial odometry driven by individual optical-flow constraints. For each tracked point, the bearing and its rotationally compensated derivative give a depth-free homogeneous constraint on the body-frame velocity. These constraints enter the innovation of an observer on the gravity-augmented group $\mathbb{SE}_3(3)$ through a Riccati gain, without estimating depths or reconstructing the direction of motion. The auxiliary gravity state makes the six-dimensional body-frame velocity-gravity error dynamics independent of the attitude correction, and their uniform observability is shown to be equivalent to persistent excitation of a matrix formed from the inertial bearings and their derivatives. Under this condition, the body-frame velocity and gravity errors converge globally and uniformly exponentially, and a gravity-based attitude correction renders the combined velocity, gravity, and reduced-attitude error almost globally asymptotically stable and locally uniformly exponentially stable. Simulations illustrate the excitation condition, recovery from initial errors, and sensitivity to perturbed measurements.

0.20

Mapping Tire-Road Friction Coefficients Along Driven Trajectories

cs.RO ·2026-10-09 ·Risto Ojala
benchmarkcode/data similarity 0.57
Abstract

Information of the tire-road friction coefficient is critical for intelligent vehicle systems, as friction establishes the limits at which the vehicle can be manoeuvred without loss of control. While there is extensive literature on online friction estimation, no previous studies have explored post-processing and mapping friction coefficients along a driven trajectory based on recorded sensor data. Mapped friction information could be shared by connected vehicles, enabling proactive measures in low-friction areas. This paper presents an offline post-processing method, FrictionMap, for mapping friction coefficients from recorded driving data. The method operates on commonly available on-board vehicle sensor information, and requires only a basic vehicle parameter set and a slip threshold as prior knowledge. FrictionMap runs an extended Kalman filter combined with a Rauch-Tung-Striebel smoother to estimate vehicle dynamics. Data points where the friction limit is observable are identified by filtering points based on tire slip. A Gaussian process is fitted to these points to acquire a continuous estimate of the friction coefficient along the trajectory. FrictionMap is validated via a simulation study, and shown to outperform commonly used online friction estimation techniques. The code implementation and the simulation benchmark are released as open-source after paper acceptance to enable further research.

0.34