CS Paper Radar

RF-VoID: Towards Bandwidth-Efficient Exterior Tile Void Detection via Narrowband Radio-Frequency Representation Learning

Xinyan Chen, Ruiqin Ma, Shunsuke Shoda, Changyu Zhou, Ryo Natsuaki, Akira Hirose, Jianfei Yang, Li Yi

eess.SP cs.AI ·submitted 2026-09-11 03:18 UTC · v1
unusual

Abstract

Hidden debonding behind exterior ceramic tiles is a falling-tile hazard, and millimeter-wave radar offers a non-contact way to find it. Conventional interpretation first reconstructs a range profile, so its reliability is bounded by the available bandwidth, yet bandwidth is what sets the cost, the acquisition time, and the regulatory footprint of a deployed system. This work asks whether that bandwidth can be traded for computation. A 4-40 GHz stepped-frequency system scans twelve exterior-wall specimens containing 0.5-1.0 mm air voids at different depths and interfaces, and the bandwidth dependence of A-scan, B-scan, and C-scan interpretation is analyzed to establish the resolution bound. RF-VoID is then proposed, which decides directly on the narrowband complex response: the sub-band is kept in its measured frequency order with amplitude and phase alongside the in-phase and quadrature channels, a dual-branch encoder reads it along the physical frequency axis using relative position encoding and a distance-dependent locality bias, and an inspection-oriented objective handles the class imbalance and the asymmetric error cost of facade screening. Under a mixed-sample protocol the method attains 98.61% accuracy and a 95.84% F1-score with 0.5 GHz of bandwidth, a seventy-two-fold reduction relative to the full sweep, without range-profile reconstruction, deconvolution, or depth-slice selection; on specimens held out entirely from training it remains the strongest of the compared models, with a mean macro F1-score of 62.12% at 0.5 GHz that rises to 68.57% at 1 GHz.

Closest papers

Nearest neighbours by meaning across the whole index.

CFAR Detection on Non-Coherently Integrated Angular Maps for mmWave Radio SLAM

eess.SP ·2026-11-10 ·Paolo Tosi, Ossi Kaltiokallio, Marcus Henninger, Silvio Mandelli, Mikko Valkama
similarity 0.52
Abstract · 6 pages, 4 figures, 1 table. This work has been submitted to the IEEE for possible publication

Reliable multipath detection is essential for millimeter-wave simultaneous localization and mapping (SLAM), where propagation paths reflecting off the environment provide geometric constraints beyond the dominant line-of-sight component. This paper develops constant false alarm rate (CFAR)-based detectors for beam-swept bistatic integrated sensing and communications (ISAC). Starting from conventional CFAR on the I/Q datacube, we derive a modified detector for non-coherently integrated angular power maps, where the post-integration noise statistics differ from those assumed by standard cell-averaging CFAR. To improve practicality, we introduce a multi-cell cell-under-test formulation and a plus-shaped training window that reduces computational cost while accounting for sidelobe structure. The proposed methods are evaluated on experimental 60 GHz indoor measurements using a snapshot-SLAM estimator. Compared with a singular value decomposition (SVD)-based detector, the proposed CFAR approaches reduce the overall positioning RMSE from 0.30 m to 0.24-0.26 m, with the largest improvement in non-line-of-sight snapshots. The multi-cell non-coherent detector further lowers the computational complexity without degrading positioning accuracy, demonstrating its suitability for practical multipath radio-SLAM.

0.26

Low-Complexity Wideband Channel Estimation for ISAC in Analog Millimeter-Wave Systems

eess.SP ·2026-10-23 ·Hamza Touati, Raffaele Viterbo, Mattia Brambilla, Sandra Roger, Carmen Botella-Mascarell
published similarity 0.48
Abstract · Accepted for publication in the 2026 IEEE 1st Annual Integrated Sensing and Communication Conference (ISAC)

Accurate wideband channel estimation is a key enabler for millimeter-wave (mmWave) integrated sensing and communication (ISAC) systems. In the narrowband scenario, the Transformed Spatial Domain Channel Estimation (TSDCE) method was previously shown to provide fast and accurate angle estimation with substantially lower complexity than conventional compressed-sensing approaches based on orthogonal matching pursuit (OMP). However, wideband ISAC scenarios additionally require delay estimation, making joint angle-delay sparse recovery computationally expensive due to the multidimensional dictionary search. In this paper, we propose a wideband extension of TSDCE, namely TSDCE-TD, which incorporates time-domain support and decouples angle and delay estimation. Two variations are proposed for delay estimation: TSDCE-TD (Dict), which uses a one-dimensional delay dictionary, and TSDCE-TD (FFT), which applies Fast Fourier Transform (FFT) zero-padding interpolation. Path estimates are iteratively refined through successive interference cancellation and alternating angle-delay updates. Simulation results show that the proposed methods outperform OMP-based baselines under practical dictionary sizes, while achieving comparable performance at high-resolution settings with substantially lower computational complexity. Moreover, the angle-delay estimates obtained using the proposed approach enable accurate single-anchor indoor localization in a ray-traced environment, achieving sub-20 cm positioning errors and satisfying practical indoor positioning requirements.

0.27

WiFiSpectralJam: A Large-Scale Open Wi-Fi Spectral Scan Dataset with Controlled RF Jamming

cs.NI ·2026-08-16 ·Dania Herzalla, Govind Singh, Willian T. Lunardi, Martin Andreoni
benchmarkcode/data similarity 0.48
Abstract

WiFiSpectralJam is a Wi-Fi spectral-scan dataset comprising 14.52 GB, 96,090 CSV files, and 522,771,130 ordered spectral observations using commodity Wi-Fi sensing hardware. Measurements were acquired with a Raspberry Pi Compute Module 4 equipped with a Qualcomm Atheros QCA9880 802.11ac network interface and the Linux ath10k spectral-scan interface. The dataset spans active and passive scan modalities across the 2.4 and 5 GHz bands and includes real-world benign background captures, benign RF-chamber floor captures, and controlled RF-jamming captures generated with a HackRF One. Jamming conditions vary by transmit power, target channel, and, in the active subset, waveform type. The release provides the raw spectral-scan records together with a file-level metadata manifest, derived spectral-summary features, validation outputs, and reproducible benchmark protocols. These resources support reuse in RF interference characterisation, jamming detection, spectrum monitoring, distribution-shift evaluation, and machine-learning studies using commodity-NIC spectral measurements. The dataset is publicly available at: https://www.kaggle.com/datasets/daniaherzalla/radio-frequency-jamming/data.

0.61

Distributed ISAC-Enabled Multimodal Recovery of Missing 2-D LiDAR Measurements

eess.SY ·2026-09-19 ·Mohammed E Eltayeb
similarity 0.48
Abstract

Recovering missing regions in 2-D LiDAR scans is crucial for maintaining geometric awareness in environmental sensing. LiDAR-only reconstruction relies on measurements surrounding the missing region and can degrade as the unobserved sector grows or the surface geometry becomes more complex. This paper presents a distributed integrated sensing and communication (ISAC) framework that uses directional 60-GHz beam-training measurements from multiple receivers to assist in the recovery of missing regions in 2-D LiDAR scans. Transmitter and receiver positions, beam directions, and relative beam-power thresholding are used to construct an RF-derived surface prior without requiring RF time-of-flight measurements. The resulting RF-derived range estimates are then fused with LiDAR measurements to estimate the missing geometry. The proposed framework is evaluated in an indoor environment using LiDAR and 60-GHz phased-array measurements from 55 receiver viewpoints comprising 37,620 beam-pair power measurements across 72 controlled missing-sector cases. The results show that RF-assisted reconstruction provides larger accuracy gains as the missing-sector width increases. For the 80-degree missing-sector case investigated in this paper, RF+polar fusion is shown to reduce the mean absolute error (MAE) from 2.271 m for polar LiDAR interpolation to 0.617 m, corresponding to a 72.8% reduction. The results further show that useful RF-assisted recovery can be maintained even with fewer beam-pair measurements under limited beam training. These findings demonstrate that directional communication measurements can support environmental sensing by providing complementary geometric information for missing LiDAR regions.

0.11

SPARC: Sparse Path-Aware Residual Calibrator for Wireless Ray Tracing at Upper Mid-Band

eess.SP ·2026-09-05 ·Mingjun Ying, Guanyue Qian, Xinquan Wang, Xingchen Liu, Ishaan S. Gupte +3 more
similarity 0.48
Abstract · 6 pages, 4 figures

Accurate site-specific ray tracing (RT) is essential for upper mid-band network planning, yet raw RT can produce per-path multipath component (MPC) power errors on the order of 19--24~dB in cluttered indoor environments. A fixed-geometry material-sensitivity bound shows that a 30% relative-permittivity perturbation changes each surface interaction by at most 6.28~dB across the considered indoor materials. However, even MPCs with only one surface interaction exhibit a 19.2~dB mean RT--measurement bias, suggesting that missing clutter, displaced surfaces, and simplified 3D geometry dominate the per-path RT error. We propose SPARC (Sparse Path-Aware Residual Calibrator), a lightweight per-path calibration method that learns a sparse linear residual model from one completed RT simulation. SPARC uses standard RT features selected per fold by nested cross-validation, with ridge regularization and power-gated path matching; four features recur in both environments. Using measured indoor factory (InF) and indoor hotspot (InH) datasets at 6.75 and 16.95~GHz, SPARC reduces per-path power RMSE from 18.74 to 4.74~dB in InF and from 23.12 to 5.39~dB in InH. A jointly trained InF+InH model achieves 5.73~dB RMSE. When all links from one transmitter location are held out for testing, SPARC achieves 4.99~dB RMSE in InF and 5.85~dB RMSE in InH. SPARC therefore provides a practical post-processing calibration layer for site-specific per-path power prediction without ray-tracer modification or additional RT runs.

0.19

Channel Knowledge Maps for FR3 UAV Base Stations: Dataset and ML-based Modeling

eess.SP ·2026-10-05 ·Guillem Moreno~Garcia, Sergi Abadal, Evgenii Vinogradov
published similarity 0.47
Abstract · 6 pages, accepted for IEEE Globecom'26 Workshops

This paper introduces a dense upper mid-band Frequency Range (FR3) Channel Knowledge Map (CKM) dataset for Uncrewed Aerial Vehicles (UAVs) with an on-board base station (UxNB). It contains 16,180 CKM samples from 3,236 urban locations in 66 cities at 7.125 GHz and UxNB heights of up to 500 meters. Every 513x513 sample stores the building geometry, the line-of-sight (LOS) state, attenuation, delay spread, angular spread, and variable transmitter height. As a focused first use-case, we propose an interpretable height-aware attenuation model. Its LOS branch combines free-space loss, two-ray term, and compact data-based height/range calibration. Its non-LOS (NLOS) branch combines a COST 231-Hata basis with local environment-specific linear calibration. The proposed model reaches 1.93 dB overall root mean square error, with 1.74 dB in LOS and 3.54 dB in NLOS on over 500 unique locations in 14 unseen cities (2,590 samples in total). The result provides attenuation data for FR3 UxNB deployments and a physical anchor for future FR3 modeling efforts.

0.36

RFWeave: Learning Wireless Propagation Across Scenes and Transceiver Configurations

eess.SP cs.LG ·2026-10-12 ·Shurui Xu, Xiao Ye, Yijie Bian, Junjie Ai, Yuxuan Chen +3 more
similarity 0.47
Abstract · 20 pages, 12 figures, 12 tables, including appendices

Wireless propagation modeling is foundational to the evaluation and design of modern communication systems. To achieve accurate wireless propagation prediction, recent learning-based approaches leverage scene geometry and materials, demonstrating promising generalization across transceiver locations and unseen scenes. However, these approaches remain largely confined to a fixed configuration of array size, receiver orientation, and transmit beam. In this work, we introduce RFWeave, a learned wireless propagation model designed to generalize across scenes, transceiver locations, and transceiver configurations. To accommodate varying array structures, RFWeave incorporates variable-length transceiver tokens that represent antenna elements individually. Furthermore, to capture the geometry between transmit and receive antenna elements, RFWeave aggregates their pairwise spatial relations into propagation tokens. A configuration-conditioned decoder predicts the spatial spectrum and received power. RFWeave is trained on a large-scale simulated dataset spanning 10,000 indoor scenes and more than 5 million channel records under diverse transceiver configurations. Extensive evaluations show that RFWeave achieves state-of-the-art performance across all evaluated generalization settings, improving spatial spectrum structural similarity (SSIM) by up to 15.7% and reducing received power mean absolute error (MAE) by up to 35.4% over the strongest baselines on unseen scenes. Additional experiments on measured DICHASUS data and in beam management further demonstrate RFWeave's broader applicability to real-world channels and downstream wireless tasks.

0.24

Electromagnetic Twin: Completing the Wireless World from Sparse Channel Evidence

eess.SP ·2026-08-21 ·Tuo Wu, Jie Tang, Kangda Zhi, Junteng Yao, Maged Elkashlan +3 more
similarity 0.47
Abstract

Acquiring dense channel information over many locations and beams incurs considerable pilot and processing overhead. Radio maps and channel knowledge maps (CKMs) reduce this overhead by reusing site-specific channel information, but their contents must be refreshed when new measurements or environmental observations become available. This paper introduces an \emph{electromagnetic twin} as an updatable digital representation that uses sparse channel evidence to reconstruct the wireless state requested by communication queries. Rather than replacing radio maps or CKMs, the twin uses a CKM as channel memory, combines it with registered scene information, and regenerates its outputs after each evidence update. We instantiate this idea by completing a two-dimensional channel-gain field from sparse samples and an incomplete floor plan. A learned RF completion backbone recovers the main propagation structure, and a lightweight residual adapter tests whether frozen CLIP features provide useful side information. With $4\%$ measured locations and $55\%$ missing semantic objects, the RF backbone attains $4.44$ dB RMSE, compared with $8.29$ dB for CKM interpolation and $8.38$ dB for an incomplete physics prior. Residual adaptation reduces RMSE by a paired mean of $0.135$ dB (95\% confidence interval: $0.100$--$0.169$ dB), but a same-capacity random-feature control is statistically indistinguishable from the CLIP-conditioned adapter. The results therefore support the measurement--update--query loop and lightweight residual correction, while avoiding an unsupported attribution of the correction to visual semantics.

0.45