CS Paper Radar

AI for Science with GPT-6 Astra: Thermal Design and Electrothermal Analysis of 2D CFET

Min-Hui Kim, Khushi Sharma, Sarah Zhang, Ye Wang

cs.AI cond-mat.mtrl-scics.AR ·submitted 2026-09-15 12:48 UTC · v1

Abstract

Thermal optimization of 2D CFET inverters requires testing structural proposals against their electrical costs. We examine these research tasks using an AI agent workflow within a supplied electrothermal model. At 12 nm, Astra selects a redistributed source-interconnect geometry, while a coordinating agent proposes a substrate-directed heat-removal path. The combined design reduces peak temperature rise by 1.67 K at fixed metal volume and 20 μW. A subsequent metal-resistance sensitivity gives about 0.6-K inverter cooling alongside a 2% nFET on-current loss. Effective contact-length scaling further shows that lower temperature can accompany higher thermal resistance when current falls. Reproduction identifies agreeing implementations and retains a 104.95-K failure for diagnosis. These results show that an AI scientist workflow can propose thermal structures, test them under common constraints, and quantify their electrical cost.

Closest papers

Nearest neighbours by meaning across the whole index.

System-Technology Co-Evaluation of A7 CFET and A10 NSFET Technologies from Cell Parasitics to Chip Reliability

cs.ET ·2026-09-14 ·Mahdi Benkhelifa, Leon Mayr, Hadi Nour Eddine, Andrea Padovani, Luca Larcher +1 more
similarity 0.56
Abstract

Complementary FETs (CFETs) extend nanosheet FET (NSFET) scaling by vertically stacking n- and p-type gate-all-around (GAA) devices, thereby shrinking standard-cell area. The performance gain, however, cannot be assessed from device metrics alone, as CFET layouts also introduce larger cell-level parasitic resistance and capacitance (RC). In this work, we present a physics-based thermal- and aging-aware system-technology co-evaluation (STCO) flow to assess parasitic RCs in A7 CFET and A10 NSFET technology nodes. Our flow links calibrated device models, optimized standard-cell generation, automated GDS-to-TCAD conversion enabling accurate 3D parasitic RC extraction, full RTL-to-GDS implementation for an AI accelerator, multiphysics thermal analysis, and physics-based bias temperature instability (BTI) aging evaluation. Using the same device model for both technologies, we can isolate the impact of parasitic RCs and design at different levels of the design flow. The results of the AI accelerator design demonstrate that the A7 CFET reduces the chip area by 24.7% and the total wire length by 12%, improving the area efficiency TOPS/mm^2 by 74% relative to the baseline of the A10 NSFET. Under iso-frequency operation, results reveal that CFET voltage scaling reduces power by 68% and lowers power density from 148 W/cm^2 to 55 W/cm^2, which reduces the chip's temperature from 125 degrees C down to merely 62 degrees C. The resulting reduction in stress temperature suppresses 10-year BTI-induced degradation by 39%, reducing the required aging timing guardband by 53%.

0.34

DeepOHeat-v2: Self-Improving Operator Learning for Fast and Trustworthy Thermal Optimization in 3D-IC Design

cs.LG physics.data-an ·2026-08-17 ·Xinling Yu, Yixing Li, Ziyue Liu, Xin Ai, Zhiyu Zeng +2 more
benchmark similarity 0.52
Abstract

Thermal-aware optimization of multi-die 3D integrated circuits evaluates many designs, each a costly heat-equation solve. Operator-learning surrogates replace this solve with a fast forward pass, ideally trained from physics alone, without labeled data. DeepOHeat-v1 made such surrogates fast and trustworthy, but only on low-contrast geometries. High-contrast multi-die stacks break it in two ways: discontinuous conductivities make the continuous physics loss ill-defined at material interfaces, and ill-conditioning ($κ_2(A_h) \approx 6 \times 10^4$) puts the discretized strong-form loss beyond first-order optimization. We propose DeepOHeat-v2 to overcome both. First, we train on a discretized physics loss that handles the discontinuities natively; its energy form reduces the prediction-space loss-Hessian conditioning from $κ^2$ to $κ$, and a matrix-preconditioned optimizer cuts the mean peak temperature error from over 30 K to 0.55 K. Second, because optimization leaves the training distribution, we propose a self-improving framework: a hotspot trust gate sends flagged placements to a reference solver, and the surrogate incrementally retrains on the refined solutions, keeping an update only when it improves held-out validation error. On a multi-die benchmark, the surrogate-true peak gap on the returned design falls from 1.12 K to 0.11 K, matching a solve-at-every-step optimizer while running $56\times$ faster.

0.26

A Composable AI-Accelerated Iterative Solver for 3D-IC Thermal Modeling

cs.LG ·2026-10-01 ·Yixing Li, Jiahang Zhou, Zhiyu Zeng, Xin Ai
similarity 0.52
Abstract

Accurate thermal analysis of heterogeneous 2.5D/3D-IC packages is essential yet computationally prohibitive. A single full-package FEM simulation can take hours, while AI-based surrogates treat the entire stack as a monolithic prediction target and must be retrained whenever the die count or topology changes. To address this limitation, this work proposes Domain-Decomposed AI-Accelerated Iterative Solver for Thermal Analysis (DAIST), a composable thermal solver that decomposes the global package simulation into block-level subdomain problems, replaces subdomain solvers with neural operators, and couples them through iterative exchanges of interfacial temperature and heat flux. This local-to-global architecture eliminates the topology lock-in of monolithic models: block-level neural operators can be directly reused in unseen package assemblies without retraining. The iterative coupling strategy further provides a controllable accuracy-runtime tradeoff, where the iteration budget can be adjusted to trade accuracy for runtime. Evaluated on a multi-chiplet system and an advanced packaging system, DAIST achieves up to $178\times$ speedup over traditional FEM solvers with mean temperature errors of 0.068% and 0.323%, respectively, while demonstrating cross-topology reuse of block-level models across structurally distinct package assemblies.

0.06

IC-ThermBench: An Open, Progressive Benchmark for Generalizable 2.5D/3D-IC Thermal Learning

cs.CE ·2026-08-25 ·David Hang, Wenkai Yang, Kuiye Ding, Haiyang Xin, Jacky Wei
benchmarkcode/data similarity 0.50
Abstract · Project site: https://github.com/Day333/ThermalBench

Standardized benchmarks are fundamental to reliable progress in AI for EDA, including learning-based thermal modeling. However, existing thermal prediction studies often rely on different datasets, simulators, data splits, preprocessing pipelines, and metrics, while most datasets and implementations remain unavailable, making fair and reproducible comparison difficult. We introduce IC-ThermBench, an open and progressive benchmark that combines established 3D-IC steady-state, transient, and industrial package tasks with a new 50,000-sample 2.5D chiplet extension designed to evaluate progressively broader represented physical variation and cross-package OOD transfer. Five Generalization Scopes cover 3D-IC fixed-design prediction, Within-Family Generalization under layout, material, and boundary-condition variation, and Cross-Package OOD transfer to unseen package systems. We evaluate eight representative baselines under common data, splits, labels, and metrics. Performance degrades gradually from S2 to S4 as represented physical support broadens, but Cross-Package OOD produces a much sharper degradation: the best RMSE and MAE increase from 1.216 and 0.938~K at S4 to 15.99 and 15.00~K at S5, respectively. With only 10 labeled samples per OOD case, target-domain adaptation reduces the best MAE to 2.60~K. IC-ThermBench further provides a unified generation, training, inference, and evaluation pipeline, enabling reproducible and fair comparison of existing and new thermal predictor.

0.32

HeatCache: Thermal-aware Energy-efficient LLM Inference Scheduling for Chassis-level Liquid Cooling in Sustainable Edge Server Rooms

cs.DC cs.PFeess.SY ·2026-09-11 ·Rui Lu, Huanghuang Liang, Kaiqi Guan, Dan Wang
similarity 0.48
Abstract

LLM inference is increasingly deployed at institution-scale edges to meet service requirements. However, multi-GPU inference consumes a large amount of electricity and produces substantial heat. To improve sustainability, operators and regulations often demand raising the ambient setpoint to reduce cooling electricity. This can increase thermal throttling and hardware aging, leading to Service-Level Objective violations. In this paper, we present HeatCache, a thermal-aware, energy-efficient LLM inference scheduler for commercial chassis-level AIO liquid-cooled GPUs at sustainable ambient temperatures. HeatCache treats AIO loops as a temporary heat buffer, measured by heat budget and schedules requests to minimize energy subject to thermal safety and SLO constraints, based on an electrical-informed heat-demand estimation from HeatiTS. We implement HeatCache atop vLLM and show that it reduces computing energy by up to 18.0%, decreases thermal-throttle exposure by 81.7%, and maintains SLO violation rates below 0.9% even up to $48~^{\circ}\mathrm{C}$.

0.11

ThermLeT: Transformer-based Temperature Prediction for 2.5D Chiplet Architecture

cs.AR cs.AIcs.LG ·2026-11-16 ·Varun Darshana Parekh, Anusha Devulapally, Sivani Devarapalli, Cassius Henderson, Shimeng Yu +1 more
publishedcode/data similarity 0.47
Abstract · Published at VLSID 2026. Code and dataset: https://github.com/MicroSystemsDesignLab/ThermLeT

The drive toward heterogeneous 2.5D chiplet packages promises unmatched performance and customization, yet the resulting density amplifies thermal challenges. To facilitate rapid design space exploration, we present ThermLeT, a multimodal transformer-based, scale invariant surrogate that integrates power density maps, spatial coordinate embeddings, material properties and heat transfer rate to predict steady state temperature in 13 ms, about four orders of magnitude faster than conventional finite element solvers such as ANSYS. To train the transformer model, we also create a dataset of 6,221 chiplet layouts perturbed from three representative architectures. On a 150 sample test set, ThermLeT achieves an RMSE of 3.16°C and an MAE of 2.24°C, improving accuracy by 35% over ThermEDGe and by 71% over HotSpot, while running approximately 6x and 11x lower inference latencies respectively. Ablation studies confirm robust generalization to unseen floorplans. Code and dataset available at https://github.com/MicroSystemsDesignLab/ThermLeT

0.69

Rapid Heat Removal from Chip Cores: Near-Junction Active Cooling of Power Transistors via Electron Entropy Transport and Spatial Decoupling

eess.SY math-ph ·2026-11-09 ·Xiangying Li
unusual similarity 0.46
Abstract · 10pages

Chip performance is limited by a shared bottleneck: the core produces heat faster than it can be moved out. We study the hardest case, RF power GaN HEMTs, whose hotspots exceed 5 kW/cm^2, and propose a horizontal near-junction active cooling topology built on electron entropy transport. Classical on-chip thermoelectric cooling faces a contest: Peltier absorption grows linearly with current, Joule heating with its square. In a vertical pillar, its own conduction resistance locks about half the Joule heat back toward the cold end, capping net cooling. From the Onsager framework we show the origin of this asymmetry: Peltier absorption localizes at the interface where the Seebeck coefficient jumps, whereas Joule heating fills the volume. The topology exploits this: a thermoelectric thin film lies flat on a diamond substrate beside the device drain (the electron exit), so bulk Joule heat leaves vertically into the substrate. A lateral fin model gives a closed form for the recirculation factor gamma: the vertical pillar yields gamma = 1, while the horizontal film yields gamma_max = sqrt(2) L_z/L_x, about 0.03 for L_z = 10 um, L_x = 500 um. The decoupling scales the net cooling ceiling and the critical runaway current by roughly 1/gamma. At equal resistance, the same film lifts maximum cooling from 13 mW to 500 mW, and the critical current from 0.65 A to 24 A. A time-constant and linear stability analysis with temperature-sensitive parameters defines the working window and safety margins for microsecond pulse cooling. The architecture leaves the device structure untouched; the principle, absorb at an interface and extract bulk heat vertically, applies to any chip with a hot core and offers a reproducible design path for near-junction thermal management.

0.28

AnalogScout: Simulation-Efficient PVT-Aware Analog Sizing with LLM Agents

cs.AR cs.AIcs.LG ·2026-10-27 ·Yichen Long, Keren Zhu
similarity 0.46
Abstract · 5 pages, 5 figures, 1 table. Submitted to IEEE ISCAS 2027

Analog device sizing must satisfy all specifications across process, voltage, and temperature (PVT) corners to ensure tape-out success, but simulating every candidate at all corners dominates the sizing time and slows design iteration. Conventional surrogate-based optimizers search the sizing space directly, while recent large language model (LLM) agents add circuit knowledge to designs but still delegate the sizes to global optimizers. Both learn the circuit response from repeated multi-corner SPICE simulations and optimize on top of it, which becomes expensive under a limited simulation budget. Providing an agent with reusable verified designs and sizing sub-blocks analytically could save most of this budget. We propose AnalogScout, a simulation-efficient PVT-aware sizing framework driven by an LLM agent. Combining elite-design reuse, analytic gm/Id local sizing and global refinement under full-corner verification, AnalogScout reduces power by 43.3% relative to the evolution strategy CMA-ES at an equal budget of 16k simulations on three SKY130 OTAs of increasing complexity, and reaches the final CMA-ES power after 7.0% of that budget. It also attains lower power than Bayesian optimization on all three OTAs and than two re-implemented LLM-driven flows on the two OTAs where they were tested.

0.21