CS Paper Radar

From powder to part: influence of virgin and recovered Inconel 625 powders on the DED-LP processability, microstructure and mechanical properties

Romain Deloffre, Lorène Héraud, Julie Lartigau

cs.CE ·submitted 2026-09-16 13:21 UTC · v1
publishedunusual

Abstract

The reuse of metal powders in directed energy deposition using laser powder offers promising sustainability benefits for additive manufacturing, yet its impact on part quality remains unknown. This study investigates the influence of powder reuse on the directed energy deposition process of Inconel 625. Virgin powder was first characterized in terms of flowability, morphology, size and chemical composition, then used to manufacture parts under fixed process parameters. These parts were analysed through two configurations (as-built and hot isostatically pressed) to assess microstructural evolution and mechanical performance. Results show that hot isostatic pressing reduces porosity and promotes grain recrystallization, enhancing ductility while decreasing tensile strength. Recovered powders from one manufacturing cycle, were also characterized. Particle size distribution and morphology remained stable, interstitial contents, particularly oxygen, increased, potentially affecting laser-material interaction and melt pool behaviour in future production. These findings highlight the importance of evaluating powder reuse through a full-process approach, from powder to final part. Future work will focus on the tensile and fatigue performance of parts produced with recovered powders.

Journal ref
Metal AMS 2026, 3rd edition International Conference Metal Additive Manufacturing, CETIM, Mar 2026, Senlis, France

Closest papers

Nearest neighbours by meaning across the whole index.

Towards Track Height Control in Additive Manufacturing on Porous Substrates: An Approach for System Identification and Controller Selection

eess.SY ·2026-11-05 ·Amelie Schatull, Torge Kolditz, Simon Kleinschmidt, Annika Raatz, Jörg Seewig
unusual similarity 0.49
Abstract · 10 pages, 3 figures

Additive manufacturing is transforming the creation of materials and parts, enabling the design and manufacturing of multifunctional parts with tailored properties. One compelling example is the combination of a porous core and a non-porous surface, which offers significant advantages in terms of weight reduction, material efficiency, strength and wear resistance. Directed Energy Deposition (DED) processes enable the transition from porous core to non-porous part surface by closing the pores. However, the surface-layer of porous substrates presents a substantial challenge to achieving consistent track heights during DED, directly impacting the final part geometry and performance. Therefore, precise control of the deposition process is crucial for realising the full potential of the multifunctional parts. In order to address this challenge, this work presents a conceptual approach for track height control during Laser-based Directed Energy Deposition (DED-LB) on porous substrates. First, the DED-LB process and the associated measurement setup are explained, along with a discussion of their limitations. The focus then shifts to the control problem, beginning with system identification to characterise the process dynamics. Subsequently, a selection of control strategies is investigated, as well as their compatibility with the process. This research provides a foundational step toward reliable additive manufacturing on porous substrates, and thus toward producing multifunctional parts.

0.33

Manufacturing Complex Airtight Soft Pneumatic Actuators for Soft Robotics: Process Evaluation and Optimization

cs.RO ·2026-08-13 ·Mohammed Abboodi
published similarity 0.47
Abstract

Manufacturing complex soft pneumatic actuators remains challenging because geometric fidelity, compliance, structural integrity, and airtightness must be achieved simultaneously. This study presents a manufacturing-focused evaluation of several fabrication routes for complex pneumatic structures, including heat-shrink forming, silicone casting, powder- and liquid-based additive manufacturing, and fused deposition modeling (FDM). The processes were assessed through process screening, baseline fabrication, failure analysis, and process improvement to distinguish inherent process limitations from correctable manufacturing defects. Heat-shrink forming was limited by geometric conformity, casting by mold accessibility and bonded interfaces, powder-based methods by residual material trapped within enclosed passages, and digital light processing by the material properties and post-processing requirements of the investigated system. FDM provided the most adaptable route because its dominant defects could be progressively reduced through process optimization. The results further showed that airtightness depends not only on nominal wall thickness but also on extrusion-path architecture, while support-free geometry is important when access for internal post-processing is limited. These findings establish a practical design-for-manufacturing approach in which process selection is guided by the compatibility between actuator architecture and manufacturing constraints. The proposed approach provides practical guidance for developing complex, flexible, and airtight soft pneumatic actuators for soft robotic applications

0.20

AI Agentic Selective Laser Sintering Process Optimization

cs.MA ·2026-08-26 ·Peter Pak, Victor Alvarado, Amir Barati Farimani
similarity 0.47
Abstract

Agentic systems enable the intelligent automation of complex workflows, specific to additive manufacturing this is applicable for complex tasks such as process parameter optimization for mechanical properties. This work investigates the AI enabled agentic process optimization within Selective Laser Sintering (SLS) to iteratively improve the tensile and flexural properties of 3 different materials on the Inova Mk1. These materials include PA12 GF, PA11 Onyx, and PA12 Blend (volume mixture of 25% PA12 GF and 75% PA12 White) and with using knowledge from previous builds and minimal guidance from the user, the agentic system was able to optimize process parameters over a small number of iterations to achieve comparable TDS specified mechanical properties. This work showcases the ability for an agentic system to continually learn from updated data, enabling the intelligent automation of complex tasks such as process parameter optimization for selective laser sintering.

0.44

Extending high value components performances with Additive Manufacturing: application to naval applications

cs.CE ·2026-09-15 ·Matthieu Rauch, Gatien Pechet, Jean Yves Hascoet, Guillaume Ruckert
publishedhighly cited similarity 0.46
Abstract

Additive Manufacturing (AM), consists of depositing material in successive layers to obtain the desired part. The parts produced by AM can thus adopt geometries inaccessible by conventional manufacturing means, for example hollow or lattice structures which considerably reduce their weight while keeping or even improving their mechanical properties. Among the many existing processes, Wire Arc Additive Manufacturing (WAAM) is particularly well suited to the manufacture of large metallic parts. It is characterized by a supply of heat in the form of an electric arc (produced by a welding generator) and a supply of material in the form of wire. This paper will discuss the impact of additive manufacturing to enhance the performances of high value components, based on naval application: the manufacturing of a hollow propeller blade demonstrator of 1.5 m high realized in the laboratory.

0.66

Predicting Surface Displacement Fields of Laser Powder Bed Fusion Parts Using STL-Derived Graphs and Part-Level Descriptors

cs.LG ·2026-11-19 ·Saima Ahmed Suhi, Lang Yuan, Md Habibor Rahman
similarity 0.45
Abstract

Predicting part distortion before fabrication remains challenging in laser powder bed fusion (LPBF), while thermomechanical simulation is computationally expensive for repeated design evaluations. This study presents a two-branch graph attention network (GAT) to predict three-dimensional surface displacement directly from STL-derived graphs. The first branch learns geometric relationships among connected vertices of a densified STL surface mesh, while the second incorporates 12 part-level descriptors of mass distribution, build-plate contact, overhang, size, and shape. Displacement labels from ANSYS Additive Print simulations are mapped onto STL vertices using Gaussian-kernel weighted averaging. Evaluated on 117 parts using five-fold cross-validation split by part, the model achieves an R^2 of 0.946 and a mean absolute error of 0.0178 mm for displacement magnitude. Relative to a node-wise multilayer perceptron, GAT improves R^2 from 0.913 to 0.946; for build-direction displacement, R^2 increases from 0.903 to 0.939. GAT also outperforms GraphSAGE (R^2 = 0.936) and a graph convolutional network (R^2 = 0.934) across all five folds. Ablation experiments show that removing mass-distribution descriptors reduces magnitude R^2 to 0.900, while removing build-plate contact and overhang descriptors reduces it to 0.920. These results demonstrate the value of combining local mesh connectivity with global geometric descriptors to predict LPBF distortion, enabling faster design iteration and earlier identification of distortion-prone geometries.

0.33

Iterative Learning Control of the Cooling Rate in a Dual-Laser Powder Bed Fusion Process

eess.SY ·2026-09-23 ·Lauren Bogo, Adam Clare, Dominic Liao-McPherson
published similarity 0.43
Abstract · 7 pages, 9 figures, 2 tables. Accepted to the 2026 IEEE Conference on Control Technology and Applications (CCTA)

The thermal history of the melt pool in laser powder bed fusion (LPBF) additive manufacturing processes governs the solidification microstructure and the mechanical properties of the resulting 3D-printed parts. Dual-laser systems offer additional degrees of freedom to control the cooling profile by reheating material behind the melt pool, but calibrating process parameters is challenging due to the complex physics of the process. We present an optimization-based iterative learning controller that determines optimal power, velocity, and offset settings by judiciously combining simulations and experiments: the model supplies search directions while feedback obtained from experiments on the real plant corrects for parameter errors, enabling convergence despite model inaccuracies. The approach is validated in simulation using a high-fidelity thermal model as a plant surrogate, with deliberate mismatches in absorption coefficient, latent heat treatment, and powder-bed effective conductivity between plant and model. Results show that the controller drives the plant cost down by over an order of magnitude and reaches a tight band of low-cost solutions across seeds, while model-only feedforward optimization stalls at a substantially higher plant cost despite appearing to converge on the surrogate.

0.37

Physics-Informed Feature Representations and Pretrained Tabular Foundation Models for Generalizable Melt Pool Geometry Prediction

cs.AI cs.LG ·2026-11-19 ·Rafid Enayet, Imtiaz Ahmed, Md Habibor Rahman
benchmark similarity 0.41
Abstract

Developing generalizable, data-efficient machine learning (ML) models for advanced manufacturing remains challenging because experimental datasets are limited and process-property relationships vary across materials and operating conditions. In laser powder bed fusion (LPBF), melt pool width, depth, and melting mode (conduction, transition, or keyhole) govern process stability and defect formation. Conventional ML models typically use dimensional process parameters, which represent laser-material interactions only implicitly and may limit cross-material transfer. This study evaluates whether two physics-informed dimensionless features, normalized enthalpy and Peclet number, combining laser processing conditions with material thermophysical properties, improve melt pool prediction over raw process parameters. We systematically benchmark seven models: four classical ML methods (Gaussian process, support vector machine, random forest, and XGBoost) and three pretrained tabular foundation models (TabPFN, TabDPT, and TabICLv2). Experiments span 316L stainless steel, IN625, IN718, and combined-material datasets, covering regression of melt pool width and depth and classification of melting modes. Dimensionless features yield comparable or superior predictive performance in most settings, with the largest gains in cross-material depth prediction (R^2 = 0.96). Tabular foundation models generally achieve stronger classification performance than classical baselines, particularly for multi-material datasets. These findings indicate that combining physically meaningful dimensionless representations with pretrained tabular models can improve data-efficient melt pool modeling and support more transferable process-window identification in LPBF.

0.32

Tool-Policy Co-Design for Powder Weighing in Laboratory Automation

cs.RO ·2026-09-30 ·Nikola Radulov, Xin Yang, Kevin S. Luck, Gabriella Pizzuto
similarity 0.40
Abstract · Paper video can be found at https://youtu.be/BEUT70hX9LM

Autonomous powder weighing is one of many bottlenecks in laboratory automation due to the complex, non-linear dynamics of heterogeneous materials. Robot chemists performing this task utilise standard tools shaped for the dexterity of human hands, whose fixed geometry sets the dynamics that the control policy needs to regulate. This work introduces a tool-policy co-design framework that concurrently optimises the morphology of a dispensing tool and its control policy for use by robots in chemistry laboratories, formulated as a bi-level optimisation that minimises dispensing error over a target distribution of powder flowabilities. The outer loop varies tool-design parameters such as tool depth, width and rim spike topology using Bayesian optimisation and hyperband, while an inner loop optimises a control policy for each candidate morphology. We also introduce a geometric similarity metric that warm-starts policy training from cached policies of structurally similar designs, exploring 28% more configurations under the same compute budget. The proposed framework is evaluated on a robotic powder weighing task across seven materials with distinct physical dynamics in a flowability-informed robot-material simulation framework. Experimental results demonstrate that our co-designed tool morphology reduces real-world weighing errors by 45% relative to a standard tool, including on previously unseen materials. These results demonstrate our method can adapt both the control policy and the physical tool to the dynamics of the target material, bringing a new paradigm for material manipulation to the field of laboratory automation.

0.35