CS Paper Radar

Towards Track Height Control in Additive Manufacturing on Porous Substrates: An Approach for System Identification and Controller Selection

Amelie Schatull, Torge Kolditz, Simon Kleinschmidt, Annika Raatz, Jörg Seewig

eess.SY ·submitted 2026-11-05 09:26 UTC · v1
unusual

Abstract

Additive manufacturing is transforming the creation of materials and parts, enabling the design and manufacturing of multifunctional parts with tailored properties. One compelling example is the combination of a porous core and a non-porous surface, which offers significant advantages in terms of weight reduction, material efficiency, strength and wear resistance. Directed Energy Deposition (DED) processes enable the transition from porous core to non-porous part surface by closing the pores. However, the surface-layer of porous substrates presents a substantial challenge to achieving consistent track heights during DED, directly impacting the final part geometry and performance. Therefore, precise control of the deposition process is crucial for realising the full potential of the multifunctional parts. In order to address this challenge, this work presents a conceptual approach for track height control during Laser-based Directed Energy Deposition (DED-LB) on porous substrates. First, the DED-LB process and the associated measurement setup are explained, along with a discussion of their limitations. The focus then shifts to the control problem, beginning with system identification to characterise the process dynamics. Subsequently, a selection of control strategies is investigated, as well as their compatibility with the process. This research provides a foundational step toward reliable additive manufacturing on porous substrates, and thus toward producing multifunctional parts.

Comment
10 pages, 3 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Optimization-Based Path Planning for Industrial Manipulators: Experimental Validation in Additive Manufacturing

cs.RO math.OC ·2026-11-10 ·Shiva Ganesh Murali, Valentin Bhend, Deepak Ingole, Gabriele Fadini, Alisa Rupenyan
similarity 0.53
Abstract · Submitted for the review in ECC 2027

Robotic additive manufacturing requires joint paths that reconcile robot feasibility with process-specific geometry. We develop an offline optimization-based path planner that combines joint-path regularity and self-collision penalties with process costs and constraints, so that a new process enters through its own reference, residuals, and tolerances. Full-path and boundary-coupled chunked optimization handle references of different lengths. Iterative Weight Tuning (IWT) determines the cost weights from the gaps between Key Performance Indicators (KPIs) and their targets. In carbon-fiber winding and robotic 3D printing, the planned paths meet the geometric tolerances and all KPI targets, and both paths are executed on a UR10e, without extrusion for printing, with joint-level tracking recorded during execution.

0.22

Robot Aware Computational Design of Object Specific Passive Grippers for Additive Manufacturing

cs.RO ·2026-09-03 ·Abdullah Yahya Abdullah Omaisan, Ibrahim Sheikh Mohamed
similarity 0.49
Abstract

This paper presents an end-to-end computational pipeline that converts a selected object mesh, a measured object state, and a selected six-axis robot into an object-specific, unactuated, additively manufacturable gripper. The method couples exact-mesh RGB-D/ICP pose registration, deterministic surface-contact sampling, uncertainty-aware wrench screening, selection among six passive capture mechanisms, object-conformal surface synthesis, full-orientation robot inverse kinematics, a swept-volume-aware manufacturing domain, directional fused-deposition finite-element screening, and constrained three-dimensional SIMP topology optimization. Unlike workflows that treat grasp selection, tool geometry, motion, and structural design as separate problems, every exported design is bound to the source mesh, object pose, robot flange, contact set, and insertion hypothesis by a traceable design identifier. We derive the implemented registration, contact, fit-tolerance, finite-element, and density-optimization equations and prove three properties of the numerical construction: nodal load preservation, monotonic compliance sensitivity under SIMP interpolation, and voxel-domain containment after topology post-processing. Four archived object-specific attempts - a rabbit, camera flange, 3DBenchy, and faceted bust - meet the nominal fit, uncertain-wrench, runtime-sweep, and baseline/post-topology FEA gates. A deliberately enlarged +/-3 mm, +/-5 degree pose stress check differentiates the designs, retaining 29-134 of 160 simulated trials. Their reconstructed topologies retain 92.0-97.6% of the FE domain because functional regions are protected. Archived robot photographs show the corresponding printed assemblies qualitatively, while nominal material properties and absent coupon-calibrated, instrumented tests keep all four at digital-screening status rather than operational release.

0.25

From powder to part: influence of virgin and recovered Inconel 625 powders on the DED-LP processability, microstructure and mechanical properties

cs.CE ·2026-09-16 ·Romain Deloffre, Lorène Héraud, Julie Lartigau
publishedunusual similarity 0.49
Abstract

The reuse of metal powders in directed energy deposition using laser powder offers promising sustainability benefits for additive manufacturing, yet its impact on part quality remains unknown. This study investigates the influence of powder reuse on the directed energy deposition process of Inconel 625. Virgin powder was first characterized in terms of flowability, morphology, size and chemical composition, then used to manufacture parts under fixed process parameters. These parts were analysed through two configurations (as-built and hot isostatically pressed) to assess microstructural evolution and mechanical performance. Results show that hot isostatic pressing reduces porosity and promotes grain recrystallization, enhancing ductility while decreasing tensile strength. Recovered powders from one manufacturing cycle, were also characterized. Particle size distribution and morphology remained stable, interstitial contents, particularly oxygen, increased, potentially affecting laser-material interaction and melt pool behaviour in future production. These findings highlight the importance of evaluating powder reuse through a full-process approach, from powder to final part. Future work will focus on the tensile and fatigue performance of parts produced with recovered powders.

0.42

Freeform Programmable Liquid Crystal Elastomers via Monolithic Integration of Co-Optimization and 4D-Printing

cs.CE math.OC ·2026-10-23 ·Yibo Wang, Asad Farooq Ahmed, Weichen Li, Weiyun Xu, Xiaojia Shelly Zhang
similarity 0.49
Abstract

Liquid crystal elastomers (LCEs) are active materials capable of large, reversible thermally induced actuation, offering significant potential for applications such as artificial muscles and soft robotics. However, their broader deployment is hindered by the lack of a unified design-to-fabrication framework, the strong coupling among geometry, director fields, and manufacturing constraints, and the difficulty of reliably translating complex designs into physically realizable architectures. Here, we present an autonomous and monolithic integration of co-optimization and 4D printing that enables the end-to-end design-to-realization of versatile programmable LCE architectures with superior precision, complexity, and versatility. The proposed framework establishes a unified design strategy that co-optimizes the freeform multilayer geometry and fully continuous layer-specific director distributions, and subsequently translates the optimized fields into fabrication-ready DIW toolpaths through an automated manufacturing-aware pipeline. To bridge computation and realization, we develop an optimization-centered 4D printing approach with automated, fabrication-aware toolpath generation tailored for direct ink writing of LCEs. With the proposed design-to-fabrication paradigm, we experimentally realize architectures that exhibit complex, non-intuitive thermo-mechanical behaviors. Experiments achieve highly challenging prescribed functionalities beyond the reach of intuition-based approaches and show excellent agreement with numerical simulations across all samples. This work establishes a generalizable inverse design and physical realization of freeform programmable LCE systems, enabling function-oriented and optimization-driven intelligent LCE applications for next-generation soft robotic and responsive material engineering.

0.23

Iterative Learning Control of the Cooling Rate in a Dual-Laser Powder Bed Fusion Process

eess.SY ·2026-09-23 ·Lauren Bogo, Adam Clare, Dominic Liao-McPherson
published similarity 0.47
Abstract · 7 pages, 9 figures, 2 tables. Accepted to the 2026 IEEE Conference on Control Technology and Applications (CCTA)

The thermal history of the melt pool in laser powder bed fusion (LPBF) additive manufacturing processes governs the solidification microstructure and the mechanical properties of the resulting 3D-printed parts. Dual-laser systems offer additional degrees of freedom to control the cooling profile by reheating material behind the melt pool, but calibrating process parameters is challenging due to the complex physics of the process. We present an optimization-based iterative learning controller that determines optimal power, velocity, and offset settings by judiciously combining simulations and experiments: the model supplies search directions while feedback obtained from experiments on the real plant corrects for parameter errors, enabling convergence despite model inaccuracies. The approach is validated in simulation using a high-fidelity thermal model as a plant surrogate, with deliberate mismatches in absorption coefficient, latent heat treatment, and powder-bed effective conductivity between plant and model. Results show that the controller drives the plant cost down by over an order of magnitude and reaches a tight band of low-cost solutions across seeds, while model-only feedforward optimization stalls at a substantially higher plant cost despite appearing to converge on the surrogate.

0.37

Kinematics-Grounded Agentic AI for Robotic Additive Manufacturing Process Planning

cs.RO cs.AIeess.SY ·2026-09-16 ·Jingzhan Ge, Ruimin Chen, Azadeh Haghighi, Jiong Tang, Farhad Imani
similarity 0.47
Abstract · 25 pages, 17 figures

Robotic additive manufacturing (AM) extends material-extrusion printing beyond gantry kinematics but makes process planning robot-dependent. A slicer-generated plan that appears favorable in part coordinates can become infeasible or robotically unfavorable on a manipulator because slicer-process decisions and part orientation determine the generated path, while part orientation and workspace placement affect its kinematic realization. Existing AM tools, large language model (LLM)-based decision-support methods, and digital-shadow systems do not provide integrated pre-execution evaluation of these coupled decisions. This paper presents agentic robotic additive manufacturing (A-RAM), an agent-specialist-tool framework that converts user intent and a part file into traceable, execution-ready plans. The LLM interprets manufacturing objectives and constraints, identifies prescribed and searchable planning variables, and encodes this reasoning in a schema-constrained request; a deterministic Planning Agent instantiates the corresponding search workflow, while domain tools compute quantitative evidence for slicing, placement, inverse kinematics, trajectory timing, Joint-6 jerk, and extrusion. The framework is evaluated on a six-axis robotic-arm AM cell through three case studies covering expert-specified planning, goal-only planning, objective-dependent infill screening, and geometry-dependent orientation-placement selection. Across the evaluated candidate sets, selected plans achieve up to 53.5% lower maximum Joint-6 jerk and 48.3% lower mean absolute Joint-6 jerk than the least favorable valid candidates, while objective-specific infill screening yields motion-plan completion times up to 40.1% shorter and extrusion paths up to 12.7% shorter than the corresponding least favorable screened patterns.

0.15

Inverse Modeling for Laser Pulse Shape Design in Inertial Confinement Fusion

cs.AI cs.LGeess.SYhep-ex ·2026-10-22 ·Ricardo Luna Gutierrez, Vineet Gundecha, Rahman Ejaz, Varchas Gopalaswamy, Riccardo Betti +3 more
similarity 0.47
Abstract · Initial version submitted to NeurIPS 2026 pending publication

The achievement of practical fusion energy remains one of the most pressing unsolved scientific challenges, with immense implications for carbon-free power. A critical factor in the success of Inertial Confinement Fusion (ICF) is the design of a Laser Pulse Shape (LP) that can optimally drive implosions under stringent physical constraints. Traditional LP design relies on computationally expensive simulations and manual iterative refinement. We introduce the ICF Laser Pulse Shape Design System (LPDS), a generative inverse modeling framework that maps desired outcomes and target pellet configurations directly to optimized LPs. Crucially, we design a multi-objective loss function to ensure the generated LPs satisfy fundamental physical constraints and experimental requirements. Furthermore, we present constraint-conditioning, inpainting, and gradient-based LP editing mechanisms for fine-grained control over specific pulse characteristics during generation. Moreover, we study the transfer of our framework to a limited set of real experimental shots. Our method establishes a data-driven inverse design framework for LP design in ICF, contributing to the advancement of practical and sustainable fusion energy.

0.26

Process-Aware Thickness Analysis in CAD Models using Hybrid Geometric Methods

cs.CE ·2026-09-14 ·Serafeim Baltadouros, Joost R. Duflou
similarity 0.47
Abstract

Thickness is a critical geometric attribute in Design for Manufacturability (DFM), yet its computational analysis in CAD environments remains largely process-agnostic. Existing approaches rely either on inscribed-sphere or ray-casting methods, each carrying limitations that make them poorly suited as universal solutions across manufacturing processes. This paper presents a process-aware thickness analysis system for parts intended for molding and milling, where the geometric method is selected and its outputs interpreted according to the DFM rules meaningful to each process. For molding, the sphere-based method detects maximum thickness violations and wall non-uniformity, and segments parts into distinct thickness zones. For milling, ray-casting identifies regions of insufficient thickness and detects thin features prone to deflection or failure. Validation on representative parts demonstrates that this hybrid approach surfaces process-specific manufacturability issues, offering designers actionable geometric feedback early in the design cycle.

0.09