CS Paper Radar

Self-excited actuation enables adaptive and resilient flapping-wing flight

Rundong Yang, Ethan S. Wold, Ellen Liu, James Lynch, Wei Zhou, Mark Jankauski, Simon Sponberg, Nick Gravish

cs.RO ·submitted 2026-09-16 22:46 UTC · v1

Abstract

The muscles that power insect flight fall into one of two categories: 1) synchronous muscles that contract under direct control from the nervous system, and 2) asynchronous muscles which have an intrinsic stretch activation response that spontaneously generates wingbeats without the need for signaling from the brain. It is thought that the emergent nature of asynchronous wingbeats provides both adaptive and responsive capabilities for flight control. To date, most flying robots use synchronous actuation. In this paper we develop the first flight-capable flapping wing robot that uses asynchronous actuation. We demonstrate that asynchronous actuation allows wings to respond to changes in the resonant mechanics of the body without control input, and wings can react instantaneously to collisions with obstacles with no extrinsic sensing needed. Flight tests within cluttered environments demonstrate that asynchronous actuation significantly improves stability and performance when compared to synchronous actuation. In total this work demonstrates that a flapping wing robot actuation strategy that emulates the asynchronous muscles of flying insects can provide fast, reactive actuation responses before a control system would need to intervene. This partitioning of embodied control to both the low-level actuation dynamics and and high-level sensorimotor system provides a compelling blueprint for new flying robots.

Closest papers

Nearest neighbours by meaning across the whole index.

From Model to Prototype: Design and Motor-Flap Propulsion Control of a Twin-Wing Metamorphic UAV

cs.RO ·2026-10-06 ·Anja Bosak, Dorian Erić, Ana Milas, Stjepan Bogdan
similarity 0.64
Abstract · 8 pages, 12 figures

This paper presents the design and control strategy for MetaMorpher, a metamorphic Unmanned Aerial Vehicle (UAV), capable of both spinning-wing hover and fixed flying-wing cruise flight. Since control of the cruise configuration is comparatively well established in the literature, this paper focuses on control of the MetaMorpher in hover mode, building on the flight dynamics model and conceptual design validated in previous work. The control algorithm is implemented using one of two phase-synchronized strategies: motor propulsion, which pulses motor thrust in synchrony with the vehicle's rotation, or flap propulsion, a novel strategy that pulses the deflection of the wing-mounted elevons. We evaluate both strategies in simulation through different flight experiments. Simulation results confirm the mathematical model and show stable reference tracking, demonstrating flap propulsion as a lightweight, decoupled alternative for hover control. Experimental testing validated the vertical-dynamics propulsion model against the physical prototype, demonstrating very good steady-state agreement across different configurations.

0.22

Towards insect-like distributed proprioception in actuators and appendages for flapping-wing insect-scale aerial robots

cs.RO ·2026-08-22 ·Alexander Hedrick, Arvind Gupta, Kaushik Jayaram
similarity 0.63
Abstract · 8 pages, 6 figures, this work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after wh…

Modern flapping-wing insect-scale air vehicles display agility similar to that of their insect counterparts; however, these impressive maneuvers are only possible with off-board sensors like optical tracking cameras. In this manuscript, we introduce two embedded proprioceptive sensors for insect-scale aerial robots: thin film piezoelectric polymers integrated directly into a driving actuator and a pitching hinge which track stroke and pitch angle, respectively. We fabricate the aforementioned size-agnostic mechanically intelligent structures (sensor-actuator, sensor-flexure) using laminate stack fabrication methods. Chirp experiments with our sensors integrated into an insect-size flapping-wing robot show accurate tracking of stroke (RMSE = 0.44 deg) and pitch (RMSE = 2.44 deg) angles in the relevant frequency range. As the first step towards demonstrating the utility of these sensors for enabling numerous onboard autonomy applications, including closed-loop wingbeat control and sensor fusion with existing insect-scale sensor suites for more accurate proprioception and localization, we show one application for each sensor. The proprioceptive hinge enables collision detection, reducing the chance of permanent damage if the robot's wing collides with an object. The proprioceptive actuator enables asynchronous flapping, which is hypothesized to increase adaptability and efficiency in insects and robots alike. A microrobot equipped with our proprioceptive actuator allows us to test these hypotheses with potential for improving flapping aerial robot performance. We foresee proprioceptive sensors having an important role in progressing both the fields of insect-scale aerial robots and robo-physics due to the bio-inspired nature and high integration level of our sensors.

0.27

Flap like a bat: Soft pneumatic wings for biomimetic ornithopters

cs.RO ·2026-10-31 ·Besetty Satyanarayana, Sirivelu Akhilesh, Bammidi Abhilash, Prabhat Kumar
similarity 0.61
Abstract · iNaCoMM2025 conference paper

This paper describes the development of a bio-inspired ornithopter wing mechanism that uses soft pneumatic actuators, such as PneuNet structures, in place of revolute joints, inspired by the complicated kinematics of bat flight. The proposed design employs pneumatically driven air pockets within a flexible wing skeleton to achieve smooth, lifelike flapping motion. The actuation system is controlled by 3/2-way solenoid valves and an air pump, which manipulate airflow and actuator deformation. We demonstrate, using ANSYS FEA software, the bending behavior of the PneuNet actuators under varying pressures to inform the wing's structural design. The implementation of soft robotics in the flapping-wing system offers potential advantages over traditional mechanisms, such as reduced mechanical complexity, lower acoustic signatures, enhanced adaptability, and wing morphing. This work demonstrates the feasibility of replacing rigid revolute joints with compliant pneumatic actuators, enabling more agile, silent, and biomimetic aerial robots.

0.32

Embodied Snap: Octopus-Inspired Distributed Reach-and-Attach with a Speed-Limited Soft Arm

cs.RO ·2026-09-19 ·Linxin Hou, Zhihang Qin, Heyang Zou, Qirui Wu, Peiyi Wang +3 more
hot direction similarity 0.57
Abstract

Reach-and-attach of soft robotic arms with passive suction requires accurate targeting and sufficient contact speed, yet geared actuators can impose a speed limit that improved trajectory tracking alone cannot overcome. This paper proposes an embodied snap controller that separates slow servo-driven preloading from rapid elastic release, enabling a compliant arm to move beyond its direct tendon-driven speed limit. Octopus biology motivates the controller's section-wise organizational prior, rather than reproduction of the octopus nervous system. A learned policy shared across three sections selects preloads, aim, tendon slack, and release timing, determining where, how, and when to load and release the body. The policy is optimized offline using a hardware-validated recurrent model within experimentally supported bounds. Across five optimization seeds and 400 unseen simulated targets, attachment success is $(73\pm4)\%$ at a $5\text{ cm}$ lateral tolerance, and the shared policy reaches the matched centralized controller's mean final reward after a median $17\%$ of the common evaluation budget. Hardware characterization achieves tip speeds of 1.56-1.64 m/s, at least $108\%$ above direct tendon-driven release. In 18 open-loop hardware trials across six placements, 17 exceed the 1 m/s snap threshold and nine retrieve the object, with successful retrieval at five placements. These results demonstrate a practical division of responsibility in the control problem: learned control prepares the body, and passive body mechanics execute the rapid movement needed for dynamic reach-and-attach.

0.28

FlapKAD: A Simulation Dataset of Coupled Wing Kinematics and Aerodynamic Dynamics for Flapping-Wing Aerial Vehicles

cs.RO ·2026-09-30 ·Haichuan Li
benchmark similarity 0.57
Abstract

Experimental investigation and modeling of flapping-wing aerial vehicles are limited by the scarcity of large-scale records that temporally align wing kinematics, aerodynamic responses, and flight states. Existing datasets are often limited in scale and affected by measurement noise and temporal misalignment between rapidly varying wing motion and the associated dynamic response, particularly during high-frequency flapping. We introduce FlapKAD, an episode-structured simulation dataset comprising 2,000 rigid-wing flight episodes and 720,152 valid time steps, with bilateral wing kinematics, aerodynamic responses, and flight states recorded synchronously within a common clock. FlapKAD supports a unified bidirectional sequence-prediction benchmark constructed from the same temporally aligned episodes. The forward task predicts future vertical force coefficients and body vertical velocity from histories of realized flap and twist angles, whereas the inverse task reconstructs future flap- and twist-angle trajectories from the corresponding response histories. A benchmark of eight representative time-series architectures across multiple prediction horizons reveals direction- and horizon-dependent model behavior, systematically higher reconstruction errors for twist angle than for flap angle, and no consistent advantage from increased architectural complexity. FlapKAD provides a reproducible dataset and benchmark for studying coupled wing-kinematic, aerodynamic, and flight-state dynamics in flapping-wing aerial vehicles.

0.27

Throwing a Tight Spiral American Football by a Humanoid Robot

cs.RO ·2026-08-17 ·Zaid Mahboob, Bowen Weng
similarity 0.57
Abstract

Accurate throwing of the American football requires precise regulation of release conditions, where coupled linear and angular momentum determine flight stability and targeting accuracy. While prior work on robotic object throwing has largely focused on generating dynamically feasible release velocities using open-gripper paradigms, explicit control of spin injection at detachment remains underexplored, particularly for aerodynamically anisotropic objects like the American football. In this paper, we present the spin-stabilized controlled tight spiral throw of an American football by a humanoid robot. Achieving this requires (i) accurately reaching the desired coupled momentum, which often involves high degrees-of-freedom (DoF) movements completed within approximately half a second, and (ii) managing the complex transient contact dynamics that arise during the sub-100-millisecond release phase, when the football is effectively underactuated as it moves partially across the fingers. To this end, we develop a coupled whole-body control strategy where the lower body is performing informed stabilization while the upper body is further divided into two phases with (i) a throw phase accelerating the football to a target state through trajectory optimization and tracking, and (ii) a follow-through phase utilizing model predictive control to actively control the wrist and remaining in-contact fingers. The proposed framework is empirically validated on a 29-DoF Unitree G1 humanoid equipped with a 7-DoF Dex3-1 three-fingered gripper. The thrown American football reaches up to 93.6% spin efficiency and a 0.286 radians linear-velocity-to-nose-alignment (nose-angle) error (where an "ideal" tight spiral corresponds to 100 % spin efficiency and 0 radians nose-angle error) at up to a 5.35 m/s linear velocity and an angular velocity of 14.5 rad/s.

0.24

Decoding Neural Population Dynamics through Robotic Analog

cs.RO ·2026-10-07 ·Wenhui Chen, Jiyue Tao, Yitao Cheng, Yutong Shi, Feitian Zhang +2 more
similarity 0.56
Abstract

Animal evidence shows that precise voluntary movements arise from rotational neural population dynamics in motor cortex, but their physical effects remain unknown. We developed a robotic analog of biological motor systems with artificial muscles, multimodal sensors, and a neural network controller trained via reinforcement learning. The robotic analog exhibited accurate movements, robustness to damage, and neural population dynamics akin to animals. This task-driven, embodied model illuminates the causal link between neural population dynamics and motor outcomes. We discovered that neural rotations generate oscillatory maneuvers orthogonal to the reaching direction, optimizing trajectory adjustments, which is confirmed by primate neural data. The model also revealed counterintuitive neural energy principles under sensor and motor redundancies, and striking Eureka moments during motor learning, bridging biological and artificial systems. These findings provide new perspectives on how neural dynamics contribute to accurate and flexible movement, inspiring future intelligent robots with animal-like mobility.

0.18

FlapSim: A Composable MuJoCo Simulation Platform and Reduced-Order Aerodynamic Model Hierarchy for Flapping-Wing Robotics

cs.RO ·2026-10-29 ·Mingshan He
code/data similarity 0.55
Abstract

Flapping-wing simulation need to reconcile high-frequency wingbeat aerodynamics with the slower dynamics relevant to flight control and reinforcement learning. We present FlapSim, a modular open-source MuJoCo simulation platform that combines robot descriptions, wing geometry, and composable aerodynamic models in a deterministic simulation pipeline. Across $48$ held-out scenarios spanning frequency, gimbal, wind, frequency-step, gust, and cross-robot flat-plate regimes, we compare five reduced-order configurations operating at $1\,\text{ms}$ with a $50\,μ\text{s}$ quasi-steady blade-element reference. The built-in hover cycle-averaged baseline achieves a $67.51\times$ CPU speedup but only $0.6593$ mean wrench fidelity. Combining multirate $21$-substep clock synchronization, three-dimensional linear/quadratic inflow and gust coupling, analytical blade-element geometry scaling, and phase-locked $1f\text{--}6f$ harmonics raises mean fidelity to $0.9646$ at a $65.19\times$ speedup in a five-block model. A streamlined four-block model without explicit step-transient lag states achieves $0.9662$ fidelity at a $67.98\times$ speedup. Controlled ablations show that stroke harmonics are particularly important during frequency transitions, improving held-out frequency-step fidelity by $+0.3176$. Transfer-function analysis explains this effect: fixed-window cycle averaging retains harmonic contributions when the wingbeat frequency changes, so within-cycle reconstruction also improves the filtered wrench. These results characterize the accuracy--computation tradeoff of the aerodynamic hierarchy and identify timing, inflow, geometry, and harmonic representation as central considerations for reduced-order flapping-wing simulation. The source code are available at: https://mingshanhe.github.io/FlapSim/\href{https://mingshanhe.github.io/FlapSim/}.

0.35