CS Paper Radar

FlapSim: A Composable MuJoCo Simulation Platform and Reduced-Order Aerodynamic Model Hierarchy for Flapping-Wing Robotics

Mingshan He

cs.RO ·submitted 2026-10-29 19:25 UTC · v2
code/data

Abstract

Flapping-wing simulation need to reconcile high-frequency wingbeat aerodynamics with the slower dynamics relevant to flight control and reinforcement learning. We present FlapSim, a modular open-source MuJoCo simulation platform that combines robot descriptions, wing geometry, and composable aerodynamic models in a deterministic simulation pipeline. Across $48$ held-out scenarios spanning frequency, gimbal, wind, frequency-step, gust, and cross-robot flat-plate regimes, we compare five reduced-order configurations operating at $1\,\text{ms}$ with a $50\,μ\text{s}$ quasi-steady blade-element reference. The built-in hover cycle-averaged baseline achieves a $67.51\times$ CPU speedup but only $0.6593$ mean wrench fidelity. Combining multirate $21$-substep clock synchronization, three-dimensional linear/quadratic inflow and gust coupling, analytical blade-element geometry scaling, and phase-locked $1f\text{--}6f$ harmonics raises mean fidelity to $0.9646$ at a $65.19\times$ speedup in a five-block model. A streamlined four-block model without explicit step-transient lag states achieves $0.9662$ fidelity at a $67.98\times$ speedup. Controlled ablations show that stroke harmonics are particularly important during frequency transitions, improving held-out frequency-step fidelity by $+0.3176$. Transfer-function analysis explains this effect: fixed-window cycle averaging retains harmonic contributions when the wingbeat frequency changes, so within-cycle reconstruction also improves the filtered wrench. These results characterize the accuracy--computation tradeoff of the aerodynamic hierarchy and identify timing, inflow, geometry, and harmonic representation as central considerations for reduced-order flapping-wing simulation. The source code are available at: https://mingshanhe.github.io/FlapSim/\href{https://mingshanhe.github.io/FlapSim/}.

Closest papers

Nearest neighbours by meaning across the whole index.

Draft: A Parametric Tool for Robot Design Exploration

cs.RO ·2026-09-29 ·David Nguyen, Marcelo Coelho, Sangbae Kim
survey similarity 0.64
Abstract

Robot performance is often limited by the cost of iterating on morphology and control together, since every computer-aided design (CAD) change has to be carried into a simulation-ready model before control work begins. Co-design methods attempt to close this gap, but each uses a model generator written for a single platform or lack the use of real-world data to suggest that designs are plausible. We present Draft, a parametric generation tool whose generalized engine compiles any parametric tree of serial chains into a simulation-ready MJCF model, without CAD. It allows engineers to explore design tradeoffs through easily adjustable models and evaluate how changes influence controller performance. Draft grounds the free parameters of each design using trends fitted to a survey of $114$ actuators and $49$ published robot descriptions, so that a generated robot is anchored to real-world hardware. We validate those trends wholistically by building twins of four off-the-shelf robots, whose masses agree to $1.10\times$ geometric mean fold error. Finally, we demonstrate how Draft exposes design tradeoffs by evaluating three quadrupeds through a two-stage reinforcement learning curriculum.

0.24

FlapKAD: A Simulation Dataset of Coupled Wing Kinematics and Aerodynamic Dynamics for Flapping-Wing Aerial Vehicles

cs.RO ·2026-09-30 ·Haichuan Li
benchmark similarity 0.62
Abstract

Experimental investigation and modeling of flapping-wing aerial vehicles are limited by the scarcity of large-scale records that temporally align wing kinematics, aerodynamic responses, and flight states. Existing datasets are often limited in scale and affected by measurement noise and temporal misalignment between rapidly varying wing motion and the associated dynamic response, particularly during high-frequency flapping. We introduce FlapKAD, an episode-structured simulation dataset comprising 2,000 rigid-wing flight episodes and 720,152 valid time steps, with bilateral wing kinematics, aerodynamic responses, and flight states recorded synchronously within a common clock. FlapKAD supports a unified bidirectional sequence-prediction benchmark constructed from the same temporally aligned episodes. The forward task predicts future vertical force coefficients and body vertical velocity from histories of realized flap and twist angles, whereas the inverse task reconstructs future flap- and twist-angle trajectories from the corresponding response histories. A benchmark of eight representative time-series architectures across multiple prediction horizons reveals direction- and horizon-dependent model behavior, systematically higher reconstruction errors for twist angle than for flap angle, and no consistent advantage from increased architectural complexity. FlapKAD provides a reproducible dataset and benchmark for studying coupled wing-kinematic, aerodynamic, and flight-state dynamics in flapping-wing aerial vehicles.

0.27

FALCON-S: Fixed-wing ground-effect Aerodynamics Simulator and Flight Control Learning Suite

cs.RO cs.LGeess.SY ·2026-09-05 ·Matteo El Hariry, Pedro Lima, Andrej Orsula, Matthieu Geist, Miguel Olivares-Mendez
similarity 0.61
Abstract · Index Terms: Robot Learning, Flight Control, Reinforcement Learning, Autonomous Navigation, Control and Dynamics, Modeling and Simulation, W…

We present a modular, high-fidelity simulation framework for the development and benchmarking of flight control strategies in fixed-wing aerial robots operating near the ground. Unlike existing simulators that rely on simplified or hover-oriented dynamics, our framework models full 6DoF rigid-body physics, semi-empirical ground-effect aerodynamics, actuator dynamics, sensor noise, and environmental disturbances. This physical realism, combined with modular component design, enables systematic analysis of low-altitude flight behavior under realistic conditions. The simulator supports both CPU and GPU backends via Torch and NVIDIA Warp, enabling high-throughput parallel execution suitable for large-scale reinforcement learning training and optimal control rollouts. A unified interface accommodates a range of controllers (both RL and optical control algorithms) across tasks such as altitude regulation and trajectory tracking. Cross-validation with X-Plane and JSBSim is also supported to facilitate engineering integration and visual fidelity.

0.18

An Open MuJoCo Simulation Framework for a Quadrotor Carrying a Tendon-Driven Soft Continuum Arm

cs.RO eess.SY ·2026-10-11 ·Haitham El-Hussieny
code/data similarity 0.61
Abstract

Combining aerial robots with soft continuum manipulators promises safe, compliant interaction with the environment, but the coupled dynamics of a free-flying base and a highly deformable, underactuated arm are difficult to study without a suitable simulator. This paper describes an open-source simulation framework, built on the MuJoCo physics engine, for a quadrotor that carries a tendon-driven soft continuum arm underneath its body. The arm is modelled as a pseudo-rigid-body chain of twelve segments joined by pairs of orthogonal compliant hinges. Three tendons, spaced \SI{120}{\degree} apart and routed through every segment, bend it in any direction. A geometric tracking controller on $SE(3)$ flies the vehicle; its rotor allocation matrix is generated directly from the model description. A closed-form tendon-tension allocation keeps every tension within its limits and gives the same bending moment in every direction. We report the full set of modelling choices and parameters, and we evaluate the framework in four simulated scenarios: a \SI{36}{\second} mission with a figure-eight and a tendon-driven tip sweep, an attitude-gain study, a quasi-static characterization of the bending workspace, and an impulsive disturbance applied to the arm tip. With the nominal gains the vehicle tracks the mission with \SI{3.1}{\centi\meter} RMS position error while the arm tip swings up to \SI{37}{\centi\meter} from the body axis. The gain study shows that a low-bandwidth attitude loop lets the arm excite sustained oscillations. The simulation runs about $15\times$ faster than real time on a laptop CPU. All models, controllers and scripts that reproduce the figures are released.

0.25

From Model to Prototype: Design and Motor-Flap Propulsion Control of a Twin-Wing Metamorphic UAV

cs.RO ·2026-10-06 ·Anja Bosak, Dorian Erić, Ana Milas, Stjepan Bogdan
similarity 0.60
Abstract · 8 pages, 12 figures

This paper presents the design and control strategy for MetaMorpher, a metamorphic Unmanned Aerial Vehicle (UAV), capable of both spinning-wing hover and fixed flying-wing cruise flight. Since control of the cruise configuration is comparatively well established in the literature, this paper focuses on control of the MetaMorpher in hover mode, building on the flight dynamics model and conceptual design validated in previous work. The control algorithm is implemented using one of two phase-synchronized strategies: motor propulsion, which pulses motor thrust in synchrony with the vehicle's rotation, or flap propulsion, a novel strategy that pulses the deflection of the wing-mounted elevons. We evaluate both strategies in simulation through different flight experiments. Simulation results confirm the mathematical model and show stable reference tracking, demonstrating flap propulsion as a lightweight, decoupled alternative for hover control. Experimental testing validated the vertical-dynamics propulsion model against the physical prototype, demonstrating very good steady-state agreement across different configurations.

0.22

Embodied Snap: Octopus-Inspired Distributed Reach-and-Attach with a Speed-Limited Soft Arm

cs.RO ·2026-09-19 ·Linxin Hou, Zhihang Qin, Heyang Zou, Qirui Wu, Peiyi Wang +3 more
hot direction similarity 0.60
Abstract

Reach-and-attach of soft robotic arms with passive suction requires accurate targeting and sufficient contact speed, yet geared actuators can impose a speed limit that improved trajectory tracking alone cannot overcome. This paper proposes an embodied snap controller that separates slow servo-driven preloading from rapid elastic release, enabling a compliant arm to move beyond its direct tendon-driven speed limit. Octopus biology motivates the controller's section-wise organizational prior, rather than reproduction of the octopus nervous system. A learned policy shared across three sections selects preloads, aim, tendon slack, and release timing, determining where, how, and when to load and release the body. The policy is optimized offline using a hardware-validated recurrent model within experimentally supported bounds. Across five optimization seeds and 400 unseen simulated targets, attachment success is $(73\pm4)\%$ at a $5\text{ cm}$ lateral tolerance, and the shared policy reaches the matched centralized controller's mean final reward after a median $17\%$ of the common evaluation budget. Hardware characterization achieves tip speeds of 1.56-1.64 m/s, at least $108\%$ above direct tendon-driven release. In 18 open-loop hardware trials across six placements, 17 exceed the 1 m/s snap threshold and nine retrieve the object, with successful retrieval at five placements. These results demonstrate a practical division of responsibility in the control problem: learned control prepares the body, and passive body mechanics execute the rapid movement needed for dynamic reach-and-attach.

0.28

AM-Bench: A Modular Simulation Suite and Benchmark for Aerial Manipulation Policy Learning

cs.RO ·2026-09-01 ·Yutong Wang, Dongjae Lee, Xiaofeng Guo, Yuanzhu Zhan, Yufei Jiang +7 more
benchmarkhighly cited similarity 0.59
Abstract · 28 pages, 7 figures, 15 tables

Standardized benchmarks have played a central role in advancing robot manipulation learning, yet most focus on ground-supported manipulation systems, which limits their applicability to dynamics-critical domains such as aerial manipulation (AM). AM presents distinct system-level challenges, including environmental disturbances, coupled dynamics between the manipulator and floating base, and constrained degrees of freedom. Consequently, task performance depends jointly on robot embodiment, low-level control, and high-level policy design. We introduce AM-Bench, a modular simulation suite and benchmark for multirotor-based AM policy learning. AM-Bench includes representative embodiments spanning underactuated, fully actuated, and overactuated systems, 12 tasks across contact, transport, and constrained interaction, configurable aerodynamic disturbances and actuator saturation, standard low-level controllers, and baseline policy-learning algorithms. Unlike prior manipulation benchmarks that primarily emphasize end-to-end policy performance, AM-Bench enables system-level evaluation of how embodiment, control, disturbances, and policy choices interact. We demonstrate its diagnostic value through three simulation studies spanning high-level policies, policy--control interfaces, and embodiments, together with real-world validation of modeled effects and a hardware test of the learning pipeline.

0.47

All You Need Is Low Fidelity: Zero-Shot Sim-to-Real of Learned Robotic Fish Control

cs.RO ·2026-09-29 ·Liam Maloney, Simon Ramchandani, Mike Y. Michelis, Ronan Hinchet, Robert K. Katzschmann
similarity 0.56
Abstract · 8 pages, 10 figures, submitted to ICRA 2027. Liam Maloney and Simon Ramchandani contributed equally

Complex tasks for underwater robots remain limited by the capabilities of their controllers. Learning a better one for a soft, underactuated robotic fish trades simulator cost against fidelity. We show that an intentionally low-fidelity simulator is enough: a stateless, quasi-steady fluid model with no wake and no added-mass history suffices to learn a \emph{general}, closed-loop controller that transfers to hardware without tuning. Our platform is a soft, single-motor, tendon-driven fish whose policy observes only what the hardware can measure. A staged pipeline grounds the simulator in two independent identifications, fixing the tail dynamics and a stateless fluid model; the policy then acts through a band-limited rhythmic trajectory generator rather than commanding the tail directly. Deployed unchanged in an outdoor pool, a single policy performs closed-loop target reaching, disturbance rejection, and out-of-distribution target acquisition and tracking. The transfer rests on the constraint rather than the fidelity: the generator cannot leave the band over which the fluid was identified. This raises the question of how much of the physics can reside in the controller rather than in the simulator.

0.25