CS Paper Radar

Towards Sustainable Magnetic Resonance Imaging: Insights from long-term, high-resolution energy recordings across an entire scanner fleet

Florian Leonhard Raab, Fiona Mankertz, Nour Maalouf, Josephine Berger, Andreas Lingg, Reza Dehdab, Sebastian Werner, Judith Herrmann, Andreas Brendlin, Sebastian Gassenmaier, Suhas Siddaramu, Fabian Wagner, Julian Wohlers, Shreeja Varadarajan, Gurlal Singh, Jens Gühring, Rainer Schneider, Konstantin Nikolaou, Saif Afat, Thomas Küstner

cs.AI physics.med-ph ·submitted 2026-09-21 08:05 UTC · v1

Abstract

Magnetic resonance imaging (MRI) is among the most energy-intensive diagnostic modalities in healthcare, yet its energy consumption and the factors influencing it remain insufficiently understood. This study aims to establish a comprehensive baseline of MRI energy consumption by characterizing energy demand across a scanner fleet, examining scanner utilization and operating patterns in clinical practice. Concurrently, it investigates the relationships between energy consumption and relevant operational and acquisition features. On average, a single MRI measurement consumed 0.43 kWh, while a complete examination consumed 13.50 kWh. In general, substantial differences in energy consumption were observed between MRI scanners and their corresponding operating modes (scan, idle, and eco-power mode). These variations may be related to differences in scanner operating patterns, employed examination protocols, and their resulting acquisition parameters. Idle and eco-power modes accounted for more cumulative energy consumption than active scanning. However, these energy shares should always be interpreted in relation to scanner occupancy, as utilization patterns strongly influence the distribution of energy across those operating modes. Lastly, linear regression analysis showed that energy consumption was more strongly associated with scan duration than with average power, suggesting that scan duration may be an important factor influencing MRI energy consumption. ...

Closest papers

Nearest neighbours by meaning across the whole index.

Sustainable MRI: Interpretable Deep Learning for estimating energy and power consumption, revealing key acquisition parameters and their interactions

eess.IV ·2026-09-15 ·Florian Leonhard Raab, Fiona Mankertz, Nour Maalouf, Josephine Berger, Andreas Lingg +14 more
similarity 0.65
Abstract

Magnetic resonance imaging (MRI) is among the most energy-intensive medical imaging modalities. To facilitate the development of more energy-efficient MRI protocols and sequences, we developed an interpretable data-driven deep learning (DL) framework to characterize the factors driving energy and power consumption. The aim was to identify the most influential acquisition parameters and their interactions on MRI energy and power demand, and to prospectively predict energy and power consumption on a per-sequence level. Two separate DL models were trained to predict energy and power consumption from MRI acquisition parameters. Attention weights were analyzed to identify the most influential parameters and their interactions. The proposed DL models successfully captured the variability in the data (energy model: $R^2 = 0.963$, power model: $R^2 = 0.843$). Energy was primarily driven by temporal parameters, whereas power depended on more complex sequence, gradient, and RF-related interactions. These results demonstrate that energy and power consumption can be accurately predicted from MRI acquisition parameters alone. The proposed framework reveals that a small subset of parameters governs energy and power demand, providing interpretable insights to support the development of more energy-efficient scanning protocols and sequences.

0.29

Resampling-based batch reweighting for ComBat harmonization of MRI radiomic features in a multi-scanner glioma cohort

eess.IV physics.med-ph ·2026-11-01 ·Rifa Sajda Tasnim, Yushuf Sharker, Md Forhad Hossain, Rakibur Rahman, Enamul Hoque Bhuiyan
published similarity 0.46
Abstract · Original article. Submitted to Journal of Magnetic Resonance Imaging (JMRI)

Radiomic features derived from magnetic resonance imaging (MRI) are sensitive to scanners; therefore, they require harmonization across scanners. In a radiomic feature dataset, some batches may be severely underrepresented compared to the others e.g., the Erasmus Glioma Database, which may provide harmonized features biased towards the larger batches in the dataset. We investigated whether reweighting underrepresented scanner batches before empirical-Bayes ComBat estimation improves feature harmonization and reduces residual scanner association while retaining grade-related information. In this retrospective, the Erasmus Glioma Database included 733 eligible patients acquired at a single center across nine vendor-by-field-strength configurations. Structural MRI acquired at 1 T, 1.5 T, and 3 T; four structural MRI sequences were analyzed. From four structural MRI sequences, 428 features were computed using an IBSI-compliant PyRadiomics implementation. The sample sizes of some scanner batches were very small compared to others, which may produce unequal precision and shrinkage of batch-effect estimates. We proposed a data augmentation approach to overcome the limitation of ComBat. We provided exploratory evidence, along with confirmatory Kruskal-Wallis tests with a Benjamini-Hochberg correction to assess the proposed method. Before harmonization, 392/428 features (91.6%) differed significantly across scanner batches (median eta-squared=0.463). Standard ComBat reduced this to 13/428 (3.0%), whereas batch-augmented ComBat reduced it to 8/428 (1.9%); the median residual effect size was <0.001 for both harmonized conditions. Batch augmentation appeared to be a useful strategy to improve the performance of ComBat for feature harmonization under severe batch-size imbalance.

0.32

Joules-to-GDP: How Much Economic Value Do AI Systems Produce per Unit of Energy?

cs.LG econ.GN ·2026-10-22 ·Amirreza Zeinali, Jon Saad-Falcon, Avanika Narayan, Mersad Abbasi, Jonathan S. Hartley +3 more
similarity 0.45
Abstract

AI systems are increasingly used to complete economically valuable tasks in various professions, such as software engineering and finance. This motivates the question: how much economic value does an AI system produce per unit of energy? To answer it, we introduce Joules-to-GDP, a framework that measures output dollar value minus AI execution cost per unit of energy, which we call Net Value per Joule (NVJ), and expert time saved per unit of energy, or Time Saving per Joule (TSJ). We then apply the framework to 220 GDPval tasks across 44 occupations. Four findings stand out. First, the most valuable work is not always the most efficient. For example, engineering work such as CAD design yields about 10% more net value per task than software development such as building websites, yet the latter yields about 27% more per joule. Second, defaulting to the most capable model can mean less total value from the same energy budget. Of the five tested models, GLM 5.2 delivers the most net value, $72.27 per task on average, using the energy of about four hours of active laptop use, while Gemma 4 31B achieves 56% of that with 23% of the energy, for 2.5x the NVJ and 2.8x the TSJ. Third, for the same model, NVJ and TSJ vary widely across different accelerators, and adding GPUs can raise energy use for modest gains: eight H100s use 3.2x the energy of one to cut completion time by only 22%, at similar net value. More capable models and more hardware must therefore earn their extra energy with enough gains in output value. Finally, the work of experts who use AI is harder for AI to match than that of experts working alone. Measured against it, GLM 5.2's NVJ falls by 70% and its TSJ by 65%. Taken together, these findings justify economic return per joule as an objective for selecting professional tasks and improving language models and accelerators, and as a basis for examining AI's effect on the economy

0.25

Beyond Scalar Flexibility: From Eligible AI Workloads to Dependable Load Relief

eess.SY cs.DC ·2026-09-04 ·Meiyi Li
similarity 0.42
Abstract · 20 pages, 18 figures, 5 tables. Code and derived data: https://doi.org/10.5281/zenodo.22308423

Grid studies often represent data-center flexibility as a fixed percentage of load, although no public production trace has shown how much eligible load persists across event durations or co-moves across clusters. We reconstruct 4,439 hourly power observations from a 185-day trace of 155,410 GPUs and derive a workload-semantic flexibility envelope. The fleet's time-averaged Monte Carlo median facility demand is 55.8 MW, while immediate eligible curtailment averages 3.55 MW after retaining allocated-GPU idle power: 12.1% of workload power and 6.35% of median facility power. Under full realization of that eligibility, 95%-available relief falls from 2.51 MW for one hour to 2.32 MW for four hours and 1.95 MW for 24 hours; a common realizable fraction q scales every value exactly by q. A mean-calibrated scalar overstates these quantities by 17%, 25%, and 47%, while a scalar tail-calibrated at four hours understates the one-hour product by 6% and overstates the 24-hour product by 17%; the share that reproduces the surface varies by a factor of 1.6 across durations and reliability levels. Aggregating 13 clusters raises four-hour firmness from 0.38 to 0.66, but cross-cluster covariance limits the gain. The production scheduler exposes almost no additional delay-based capacity: newly deferrable arrivals average 0.008 MW and have zero 95%-available capacity. These results replace an assumed flexibility percentage with duration, reliability, portfolio, and realizability terms that can be written into interconnection and demand-response contracts.

0.20

A comparison between ceiling-mounted FMCW, IR-UWB and Wi-Fi radar for in-bedroom human activity monitoring and sleep interruption detection

cs.LG ·2026-08-20 ·Anton Lambrecht, Reda El Hail, Xianjun Jiao, Pieter Crombez, Dominique Schreurs +3 more
similarity 0.41
Abstract · This paper has been submitted to IEEE Access Journal and is currently undergoing review

Despite their growing importance for contact-free radio frequency (RF) based healthcare monitoring, different radio technologies such as frequency-modulated continuous wave (FMCW) radar, impulse radio ultra-wideband (IR-UWB), and Wi-Fi sensing are rarely compared under identical deployment conditions, as existing studies typically differ in hardware, datasets, and evaluation methodologies. In addition, the performance of ceiling-mounted radars, despite their practical deployment and cost advantages in healthcare environments, remain underexplored. Therefore, this paper presents a controlled comparison and analysis of ceiling-mounted FMCW, IR-UWB, and Wi-Fi sensing using synchronized recordings from 20 participants across six room layouts. All technologies are evaluated with the same convolutional neural network (CNN) on both a fine-grained 10-class human activity recognition (HAR) task and a coarse 4-class sleep monitoring task. IR-UWB achieves the highest cross-subject activity recognition performance (89.0% macro F1), while FMCW generalizes best to unseen room layouts (83.8% macro F1). For sleep monitoring, all technologies exceed 92% macro F1 in unseen environments. The results reveal a fundamental trade-off between recognition performance and environmental robustness, which can be explained through differences in range resolution, antenna diversity, Doppler resolution, and spatial information retention. These findings provide practical guidelines for the design of healthcare-oriented RF sensing systems.

0.24

Residential Electricity Consumption Dataset for Sri Lanka (RECON-SL)

cs.DL ·2026-09-23 ·Chanuka Algama, Merl Chandana, Isuruni Fernando, Dinithi Dissanayake, Amanda Ariyaratne +4 more
code/data similarity 0.41
Abstract

This article describes the Residential Electricity Consumption Dataset for Sri Lanka (RECON-SL), a multi-source resource that integrates utility records, high-frequency smart meter data, and household surveys from the service area of Lanka Electricity Company (LECO) in Sri Lanka. The dataset captures electricity use for 4,063 households, collected over the period October 2022 to January 2025, with coverage at monthly, 6-hour, and 15-minute intervals. Monthly billing-cycle data provide complete coverage across all households, while smart meter data are available for a subsample of 1,438 households, offering both fine-grained 15-minute readings and coarser 6-hour records. Three survey waves complement these consumption measures, collecting information on demographics, housing, appliance ownership, and perceptions of energy security. Across its components, the dataset includes more than 50 million meter readings and detailed survey responses from over 11,000 household interviews. As the first dataset of its kind in Sri Lanka, and among the few worldwide to link smart meter records with longitudinal survey data at this scale, it provides a unique resource for energy, machine learning and policy research, with known gaps in smart meter coverage documented for users. The dataset can support diverse applications, including electricity load forecasting, socio-economic and behavioral energy research, distribution planning, and policy analysis in energy affordability and equity. Access is provided through an open repository, with accompanying documentation and scripts to facilitate reuse.

0.53

Quantifying Ethereum Energy Consumption via Network Mapping

cs.CY cs.CR ·2026-10-02 ·Yahn Costa Hackspacher, Cornelius Ihle, Vasundhara Shaw, Dennis Trautwein, Geerd-Dietger Hoffmann +2 more
similarity 0.41
Abstract · Preprint. 12 pages

Ethereum's electricity use fell by about 99.95% after the move from proof of work to proof of stake. Service providers still need to report operational energy use, e.g. under the EU Markets in Crypto-Assets Regulation (MiCAR). Existing estimates either apply one typical wattage to every node or start from aggregated monitoring counts. Both ignore attributes that nodes already advertise on the peer-to-peer network: client software, ARM or x86 hardware, hosting location, and validator role. We crawl the consensus and execution layers, assign each peer a wattage from those attributes using published measurements, and estimate the remaining incomplete peers with a Random Forest. On 6,934 peers from two Nebula crawls (19 and 22 June 2026), reachable nodes sum to 415 kW, or 3.63 GWh if that draw were held for a year. The same Lighthouse+Nethermind x86 wattage on every peer yields 431 kW. Observed attributes lower the total by 3.9%, mainly because nodes at Hetzner and other non-AWS clouds draw less than that home-desktop figure. AWS accounts for 15.6% of watts from 12.2% of peers, and validator-flagged nodes for 31.4% of watts from 25.7% of peers. The 415 kW snapshot is about 46% of the Cambridge Centre for Alternative Finance (CCAF) estimate of about 0.90 MW. Both use about 60 W per node, so the gap is mostly how many nodes each estimate includes. Rules cover 3,110 peers and the forest the other 3,824. On held-out labeled peers with client, architecture, and OS hidden, the forest's mean absolute error against the rule wattage is 4.3 W. Twenty-four-hour measurements on a gaming desktop differ from the predictions. After subtracting a 33 W idle graphics card that Ethereum clients do not need, both differences fall to about 19%.

0.30

Optimal Demand Response-Based Energy Management for Campus Buildings with Battery Energy Storage Systems: A Case Study of the ELB Building

eess.SY ·2026-10-14 ·Ali Beidoun, Quang Manh Hoang, Guilherme Vieira Hollweg, Van-Hai Bui
similarity 0.41
Abstract · 1-12

Buildings account for a significant portion of global electricity consumption, making demand response (DR) an effective strategy for reducing energy costs and improving grid flexibility. This paper presents an optimal energy management framework for a campus building that integrates demand response and battery energy storage systems (BESS) to minimize electricity costs while satisfying operational constraints and occupant comfort requirements. The proposed optimization model schedules building loads and battery charging/discharging based on time-varying electricity prices and building demand profiles. The framework is validated using the Engineering Laboratory Building (ELB) at the University of Michigan-Dearborn as a real-world case study. Four operating scenarios are investigated: (i) baseline operation, (ii) demand response without battery energy storage, (iii) battery energy storage, and (iv) demand response with battery energy storage. Simulation results demonstrate that demand alone reduces the building's electricity cost by approximately 12% compared with conventional operation. When battery energy storage is incorporated, the total electricity cost reduction increases to approximately 26%, highlighting the significant economic benefits of coordinated demand response and energy storage scheduling. The results demonstrate that integrating battery energy storage with demand response substantially enhances the operational flexibility of campus buildings and provides an effective solution for cost-effective and sustainable building energy management.

0.17