CS Paper Radar

Degrees of Freedom Sampling

Jiawang Li, Mats Gustafsson

eess.SP ·submitted 2026-09-23 08:32 UTC · v1

Abstract

A geometry-based framework for sampling electromagnetic fields over surfaces is presented. The approach extends the shadow-area formulation of electromagnetic degrees of freedom (DoF) from a global mode count to a spatially resolved DoF density that determines the sampling distribution. The observation surface is partitioned into cells containing approximately one DoF, with the cell area determined by the DoF density and the cell shape determined by the projection of the DoF density vector onto the observation surface. In the far field, the source shadow area defines a directional DoF density over the observation sphere, while in the near field, the mutual-shadow density and a DoF density direction determine the local sampling geometry. The resulting method requires only the source-observation geometry and does not require an explicit singular-value decomposition of the propagation operator. Numerical results for several source and observation geometries demonstrate reconstruction performance close to that of operator-based sampling methods. A beamforming interpretation further shows that the sampling cells correspond to geometry-dependent beam regions, establishing a unified connection between DoF, sampling, and beamforming.

Closest papers

Nearest neighbours by meaning across the whole index.

Development of Different Algorithms for Drone-Based Antenna Measurement Systems and Near-Field Error Analysis

eess.SP ·2026-08-17 ·Simranjit Singh, Jaswant Sharma, Jigar M. Pandya
similarity 0.58
Abstract · 4 pages, 3 figures, Manuscript submitted to IEEE MAPCON 2026

Near-field antenna measurements underpin the characterization of electrically large apertures, yet the fidelity of the Near-Field to Far-Field (NF-FF) transformation depends on the reconstruction algorithm's assumptions and robustness to real-world imperfections, including those from drone-based scanning platforms. Classical FFT-based modal expansion is efficient on uniformly sampled canonical grids but fails when phase-coherent acquisition cannot be maintained. We address this via a phaseless NF-FF algorithm reconstructing the far field from amplitude-only data through iterative phase retrieval. When sampling becomes sparse or irregular, even amplitude-based methods break down, motivating the $\textbf{Adaptive Sparse Inverse Radiation Estimator (ASPIRE)}$, a full-complex inverse source framework that solves a Method-of-Moments problem over RWG basis functions via cascaded rSVD and regularized shrinkage. Mutual coupling between basis functions is explicitly resolved, improving reconstruction fidelity beyond coupling-agnostic inverse-source formulations. The solver is accelerated via a Multilevel Fast Multipole Method engine with Numba just-in-time compilation, achieving a $1.2\times$ reduction in matrix-vector product time and up to $15\times$ lower memory usage relative to dense evaluation at N=100K. Across frequency bands and positioning/truncation error scenarios, the pipeline sustains algorithmic stability and achieves sub-degree beamwidth reconstruction error. These results establish an error-aware framework for algorithm selection across fixed and drone-based near-field measurement platforms.

0.26

A Physically Consistent Assessment of Nearfield Beamfocusing into Occluded Regions

eess.SP ·2026-08-13 ·Georg Schwan, Alexander Stutz-Tirri, Christoph Studer
positioncode/data similarity 0.54
Abstract · Submitted to a journal

Recent work has explored elaborate beamfocusing techniques for the radiative nearfield, with some studies suggesting that certain beamshapes, such as Airy beams, can enable efficient electromagnetic (EM) wave transmission behind obstacles. In this letter, we ask whether the added complexity of such techniques is justified. We distinguish between partially and fully occluded regions. In the partially occluded region, where Airy beams are commonly employed, we show that a simple line-of-sight (LoS) strategy, which activates only antennas having an unobstructed view of the receiver, is near-optimal and outperforms Airy beams at substantially lower complexity. In the fully occluded region, we argue that accurate beamfocusing requires a physically consistent EM wave propagation model that captures propagation effects such as diffraction. Once such a model is available, however, the optimal beamfocusing strategy has a closed-form solution and can be computed directly. These results suggest that elaborate techniques, such as Airy beams, offer little benefit over simpler alternatives for beamfocusing into occluded regions.

0.51

Analytical Characterization of Radial Resolution at Oblique Angles for Near-Field Communications

eess.SP ·2026-11-11 ·Viviana Centritto, Sotiris Droulias, Angeliki Alexiou
theory similarity 0.54
Abstract · 6 pages, 8 figures

Exploiting radial resolvability in near-field communications requires analytical expressions that directly map physical beam parameters to resolution-controllable focal regions. However, beam characterization at oblique angles produces complex algebraic expressions that mask these critical interactions. In this work, we introduce an electromagnetic-aware analytical model built upon a tight upper bound of the spatial power density. This approach yields compact, closed-form solutions for the peak intensity position and radial focal extent, enabling the design of contiguous multi-user focal regions with controlled radial resolution. Performance evaluations confirm that the framework closely tracks exact solutions while facilitating system dimensioning and inter-beam interference management across varying steering angles.

0.17

Wideband Large-Array Processing and Sparse Design for Angle Imaging

eess.SP ·2026-08-13 ·Ziyu Zhou, Wei Dai
similarity 0.54
Abstract · Submitted to IEEE Transactions on Signal Processing. 13 pages, 9 figures

This paper shows that wideband large-array processing can recover a large number of angle pixels with far fewer antenna elements. The key advantage of wideband signaling is that different frequencies induce different virtual arrays, whose union forms a virtual array with a substantially increased number of effective virtual elements. Thus, a sparse physical array can support far more spatial samples than physical antennas. Motivated by this capability, we study the recovery of angular responses across the full field of view $[-90^\circ, 90^\circ)$, discretized according to the improved angular resolution, and refer to this sensing regime as angle imaging. However, the resulting virtual array is inherently irregular, clustered, and does not automatically guarantee stable recovery. To address this challenge, we introduce a coverage criterion that estimates the number of stably recoverable angle pixels, without computationally intensive singular-value-based conditioning tests over candidate image dimensions. For systems satisfying this criterion, we theoretically establish deterministic condition-number bounds that characterize stable angle imaging. Building on this criterion, we derive non-uniform sparse array designs that minimize the number of physical antennas while maintaining recovery over the full field of view. Simulation results show that the proposed criterion provides practical guidance for stable system design, and that the resulting sparse arrays can recover substantially more angle pixels than the number of physical antennas, with representative designs supporting over ten times as many angle pixels as physical antennas.

0.12

Flexible Beamforming via Fluid Antenna Array: From Discrete to Continuous Array

cs.IT ·2026-10-25 ·Jingyuan Xu, Yuanhui Wu, Zhentian Zhang, Zaichen Zhang, Tuo Wu +4 more
similarity 0.53
Abstract · 12 pages, 9 figures. Submitted to IEEE Transactions on Wireless Communications

Fluid antenna arrays (FAAs) reconfigure their effective aperture by activating radiation ports from a dense set of candidate positions within a finite physical region, thereby offering geometry diversity beyond conventional fixed arrays. This paper studies arbitrary-direction far-field beam synthesis with a planar FAA. Since a fixed array adapts its beamforming weights on a predetermined spatial sampling structure, its ability to match desired beam patterns is limited when both the aperture and the number of active elements are constrained. To exploit the geometry diversity of the FAA, we propose a coarse-to-fine scheme that couples discrete port selection with continuous joint refinement. In the coarse stage, a fast Fourier transform (FFT) based phase retrieval step converts the amplitude-only beam specification into an aperture-compatible complex target, after which an FFT-tailored greedy method selects the active ports and least squares initializes their complex weights. In the fine stage, a projected adaptive moment estimation procedure jointly refines the continuous port positions and beamforming weights while enforcing the minimum interelement spacing. For the evaluated two-beam configuration, the proposed scheme increases the mainlobe energy fraction from 35.73% to 48.92% and reduces the peak sidelobe level from -2.30 dB to -3.83 dB relative to a fixed array with the same aperture and active-port count.

0.30

Intelligent Reflecting Surface Deployment for Low-Altitude Coverage: Illumination Geometry, Directional Characteristics, and Optimization

cs.IT ·2026-08-31 ·Guoying Zhang, Qingqing Wu, Ailing Zheng, Xingxiang Peng, Wen Chen +1 more
theory similarity 0.51
Abstract · Submitted to an IEEE journal for possible publication

Terrestrial base stations (BSs) are typically configured with fixed downtilt to serve ground users, resulting in weak illumination of low-altitude airspace even under line-of-sight (LoS) propagation. In this paper, we establish a channel model that incorporates BS and intelligent reflecting surface (IRS) radiation patterns for three-dimensional (3D) low-altitude coverage while preserving the existing BS configuration. We formulate a budget-constrained IRS deployment problem that jointly determines candidate-site selection, IRS orientations, and phase shifts to maximize the worst-case signal-to-noise ratio (SNR) over the 3D low-altitude airspace. The selected sites and optimized IRS parameters remain fixed after deployment, yielding a quasi-static IRS configuration. We characterize the illumination geometry between the fixed-downtilt BS and rooftop candidates by deriving the nonnegative installation-height range satisfying the BS main-lobe condition. The separation between the mapped main-lobe height boundaries grows linearly with horizontal BS-to-site distance and decreases inversely with the number of BS antennas. We further derive an analytical lower bound on the regional worst-case normalized array gain achievable through IRS phase design over served directions with different direction spans. The resulting sufficient direction span decreases inversely with the square root of the number of IRS elements when the same worst-case normalized gain guarantee is maintained. We develop a mixed-integer alternating optimization (AO) algorithm to solve the resulting problem. Simulation results validate the analytical characterizations and show that the proposed scheme achieves higher worst-case SNR than benchmarks across different deployment budgets.

0.19

Gaussian Process Implicit Surfaces as Participating Media: Realization-Free Rendering from Level-Crossing Statistics

cs.GR ·2026-09-13 ·Jack Cui, Kehan Xu, Eugene d'Eon, Wojciech Jarosz
theory similarity 0.51
Abstract · 24 pages, 17 figures

We present a theory of light scattering that connects Gaussian Process Implicit Surfaces (GPISes) and participating media in both directions. Applying the Kac--Rice level-crossing formula under a local-conditioning approximation yields a complete anisotropic radiative transfer equation (RTE) directly from pointwise GPIS statistics. A shared projected area couples extinction and scattering, ensuring geometric consistency between the GPIS and its volumetric representation. The framework spans rough surfaces, porous and non-height-field geometries, and participating media. From the same statistical structure, we derive full-sphere Beckmann and GGX normal distribution functions supporting in-plane and out-of-plane anisotropy. These families provably recover SGGX, Beckmann, and GGX as special cases and admit exact visible-normal importance sampling. We also derive analytic masking--shadowing functions and single-scattering surface models for specular microsurfaces, with extensions to multiple scattering. In the height-field limit, we prove that the local-conditioning approximation reduces to Smith's independence assumption. Our realization-free approach improves rendering efficiency over realization-based methods and can be implemented within a standard volume renderer. In the inverse direction, we characterize families of GPISes corresponding to compatible RTE parameters and develop practical lifts for heterogeneous density fields. Existing volumetric assets thereby become renderable as GPISes, while trained radiance-field reconstructions yield surface geometry and shading normals without mesh extraction and provide a density-based representation of geometric uncertainty.

0.33

Maxwell-Consistent 3-D Magnetic Field Camera using Scalar-Potential-Based Reconstruction

eess.SP ·2026-10-29 ·Paul Jürß, Marija Boberg, Philip Suskin, Tobias Knopp, Fynn Foerger
published similarity 0.50
Abstract · Accepted at IEEE Sensors 2026

Various applications require accurate 3-D characterization of magnetic fields with high spatial and temporal resolution. Building on our previously introduced spherical magnetic field camera employing 86 three-axis Hall sensors arranged on a spherical surface, we present a novel magnetic-field reconstruction approach based on the magnetic scalar potential and its spherical harmonic expansion. Unlike the previous reconstruction method that expands each vector component separately, our scalar-potential-based formulation is inherently consistent with Maxwell's equations for source-free fields by design, yielding curl-free and divergence-free field models. Using a simulated magnetic gradient field generated by two permanent magnets, we demonstrate that the proposed method achieves higher reconstruction accuracy, improved robustness to sensor noise and failure, and substantially reduced non-physical divergence and curl compared to the component-wise baseline. Furthermore, the scalar-potential approach attains superior performance with fewer coefficients, indicating a more efficient use of measurement data allowing higher-degree polynomial representations.

0.38