CS Paper Radar

Non-Ionizing Radiation Measurements for Trajectography Radars

J. Marcos Leal Barbosa Filho, Millena M. de M. Campos, Daniel L. Flor, William S. Alves, Adaildo G. D'Assunção, Marcio E. C. Rodrigues, Vicente A. de Sousa

cs.NI physics.ins-det ·submitted 2026-09-28 19:34 UTC · v1
published

Abstract

This work presents a Non-Ionizing Radiation (NIR) measurement campaign and proposes a specific measurement method for trajectography radars. This kind of radar has a high gain narrow beam antenna and emits a high power signal. Power density measurements from a C-band trajectography radar are carried out using bench equipment and a directional receiving antenna, instead of the commonly used isotropic probe. The measured power density levels are assessed for compliance test via comparison with the occupational and general public exposure limit levels of both the International Commission on Non-Ionizing Radiation Protection (ICNIRP) and the Brazilian National Telecommunication Agency (Anatel). The limit for the occupational public is respected everywhere, evidencing the safe operation of the studied radar. However, the limit for the general public is exceeded at a point next to the radar's antenna, showing that preventive measures are needed.

Journal ref
Sensors 2022, 22(18)
DOI
10.3390/s22187017

Closest papers

Nearest neighbours by meaning across the whole index.

Non-Ionizing Radiation Analysis in Close Proximity to Antenna Tower: A Case Study in Northeast Brazil

cs.NI ·2026-09-28 ·André B. F. Diniz, Vicente A. Souza, Marcio E. C. Rodrigues, Halysson B. Mendonça, Gutembregue S. Silva +1 more
publishedhighly cited similarity 0.63
Abstract

While the amount of telecommunications services grows rapidly in the whole world, humans get potentially more exposed to Non-Ionizing Radiation (NIR) from a number of different sources. This paper has a number of goals, including monitoring radiation levels in an everyday situation, an investigation of how national and international regulations organs address NIR levels and a demonstration of scientific production trends regarding this topic. The work also presents a bibliometric study about the main scientific productions and trends related to NIR measurements, with focus on the field of Telecommunications. Another contribution is a case study in Natal, Brazil, where NIR levels were monitored in four distinct locations over a period of 24 hours each and compared to the current regulations. The result is a quantitative analysis of the amount of radiation that some populations might be exposed to in distinct moments of the day. Measurements were carried out in the proximity of an antenna spot, since it could represent a source of high NIR levels (a worst case of human exposure). This campaign differs from older studies by including a more intense usage of microwaves frequencies due to operating 4G and pre-5G systems in Brazil. Finally, a statistical study involving the measurements is conducted, concluding the analysis of how some population groups might be affected by NIR.

0.52

Human Exposure to Non-Ionizing Radiation from Indoor Distributed Antenna System: Shopping Mall Measurement Analysis

cs.NI ·2026-09-16 ·Júlia da L. A. Silva, Vicente A. de Sousa,, Marcio E. C. Rodrigues, Fred Sizenando Rossiter Pinheiro, Gutembergue Soares da Silva +6 more
publishedhighly cited similarity 0.58
Abstract

It is crucial to monitor the levels of Non-Ionizing Radiation (NIR) to which the general population may be exposed and compare them to the limits defined in the current standards, in view of the rapid rise of communication services and the prospects of a connected society. A high number of people visits shopping malls and since these locations usually have several indoor antennas close to the public, it is therefore a kind of place that must be evaluated. Thus, this work presents measurements of the electric field in a shopping mall located in Natal, Brazil. We proposed a set of six measurement points, following two criteria: places with great the flow of people and the presence of one or more Distributed Antenna System (DAS), co-sited or not with WiFi access points. Results are presented and discussed in terms of the distance to DAS (conditions: near and far) and flow density of people in the mall (scenarios: low and high number of people). The highest peaks of electric field measured were 1.96 and 3.26 V/m, respectively corresponding to 5% and 8% of the limits defined by the International Commission on Non-Ionizing Radiation Protection (ICNIRP) and the Brazilian National Telecommunication Agency (ANATEL).

0.58

Assessing BIOMASS Radiometric Stability using Permanent Scatterers

eess.SP eess.IV ·2026-10-27 ·Marco Manzoni, Francesco Salvaterra, Claudio Maria Prati, Stefano Tebaldini
similarity 0.47
Abstract

Monitoring the relative radiometric stability of the European Space Agency's BIOMASS P-band synthetic aperture radar (SAR) requires separating instrumental and processing effects from temporal changes in the scene backscatter. This study investigates the use of permanent scatterers (PSs) as opportunistic references for estimating residual radiometric gains without dedicated calibration targets. The PS-based calibration (PSCal) framework combines amplitude-based scatterer selection with iterative maximum-likelihood gain estimation. Simulations assess detection and estimation performance under the limited number of acquisitions available in BIOMASS stacks, highlighting the importance of stringent selection thresholds and the dependence of estimation accuracy on scatterer abundance and signal-to-noise ratio. The approach is applied to datasets over Nairobi, Kenya, and Cordoba, Argentina. Over Nairobi, PSCal identifies an approximately 1 dB radiometric anomaly subsequently traced to a defect in radio-frequency interference mitigation, while the remaining acquisitions exhibit estimated gain variations generally within 0.1 dB. Over Cordoba, twelve acquisitions spanning two mission phases separated by approximately eight months yield residual gain variations on the order of 0.1 dB despite pronounced changes in the scene backscatter and acquisition geometry. Results were observed to be consistent with measurements from the BIOMASS Calibration Transponder (BCT) installed in New Norcia (Australia). These results demonstrate the potential of carefully selected P-band PSs to complement dedicated calibration infrastructure for relative radiometric monitoring and the detection of processing anomalies.

0.30

CFAR Detection on Non-Coherently Integrated Angular Maps for mmWave Radio SLAM

eess.SP ·2026-11-10 ·Paolo Tosi, Ossi Kaltiokallio, Marcus Henninger, Silvio Mandelli, Mikko Valkama
similarity 0.45
Abstract · 6 pages, 4 figures, 1 table. This work has been submitted to the IEEE for possible publication

Reliable multipath detection is essential for millimeter-wave simultaneous localization and mapping (SLAM), where propagation paths reflecting off the environment provide geometric constraints beyond the dominant line-of-sight component. This paper develops constant false alarm rate (CFAR)-based detectors for beam-swept bistatic integrated sensing and communications (ISAC). Starting from conventional CFAR on the I/Q datacube, we derive a modified detector for non-coherently integrated angular power maps, where the post-integration noise statistics differ from those assumed by standard cell-averaging CFAR. To improve practicality, we introduce a multi-cell cell-under-test formulation and a plus-shaped training window that reduces computational cost while accounting for sidelobe structure. The proposed methods are evaluated on experimental 60 GHz indoor measurements using a snapshot-SLAM estimator. Compared with a singular value decomposition (SVD)-based detector, the proposed CFAR approaches reduce the overall positioning RMSE from 0.30 m to 0.24-0.26 m, with the largest improvement in non-line-of-sight snapshots. The multi-cell non-coherent detector further lowers the computational complexity without degrading positioning accuracy, demonstrating its suitability for practical multipath radio-SLAM.

0.26

Emulation of Closely Spaced Spatial Sensing Targets Using a Parabolic Cylindrical Compact Range with a Multi-Feed Amplitude-Phase Controlled Linear Array

eess.SP ·2026-09-14 ·Zhangzhang Jiang, Guokai Jiang, Le Yu, Chunhui Li, Zhengpeng Wang +1 more
similarity 0.40
Abstract · 14 pages, 11 figures

Integrated sensing and communication (ISAC) base stations (BSs) are emerging as critical infrastructure for 6G networks, requiring advanced over-the-air (OTA) testing methodologies that can emulate dynamic, multi-target scenarios under far field (FF) conditions. However, existing testing solutions often suffer from limited angular flexibility, insufficient bandwidth, and prohibitive costs. {To address these challenges, this paper proposes an OTA testing system that integrates a radar target simulator (RTS), a multi-port amplitude and phase modulation (APM) network, and a multi-feed linear array with a single parabolic cylindrical compact range (SPCCR).} The proposed system is capable of emulating closely spaced spatial targets with varying incident azimuth angles. This setup meets the essential conditions for ISAC BS testing, including FF characteristics, wideband and multi-band compatibility, and the capability for sensing multiple dynamic closed-spaced targets. The feasibility of the proposed method is validated through both FEKO simulation and measurement. Experimental results demonstrate that the system successfully emulates multiple closely spaced targets within an azimuth range of $\pm 10^\circ$ with high emulation accuracy while maintaining excellent quiet zone (QZ) performance.

0.25

Enhancing Sensing Privacy in ISAC Through Joint Signal and Artificial Noise Beamforming

eess.SP ·2026-08-16 ·Ahmad Musallam, Husheng Li
publishedhighly cited similarity 0.40
Abstract

Integrated sensing and communications (ISAC) is a promising feature in 6G networks. It is envisioned to enhance spectral efficiency and provide sensing and communication services that meet the stringent requirements of future applications. However, it also poses new security and privacy concerns by giving malicious attackers access to new information about the network. In this work, we focus on the sensing privacy of a monostatic ISAC system by investigating the capability of a sensing eavesdropper (EVE) with an unknown location, acting as a passive bistatic radar (PBR) to gain access to user location information. We then propose a joint transmit and artificial noise (AN) beamforming optimization problem to degrade EVE's performance. Finally, we propose an iterative algorithm to solve the proposed optimization problem and evaluate its performance.

0.66

Doppler-Only Extended Target Tracking in a Distributed Antenna System

eess.SP ·2026-10-01 ·Baptiste Sambon, Gilles Monnoyer, Luc Vandendorpe, Claude Oestges
similarity 0.39
Abstract · Submitted to IEEE 105th Vehicular Technology Conference: VTC Spring 2027

In modern radar and Integrated Sensing and Communication (ISAC) systems, the conventional point-scatterer assumption becomes increasingly inaccurate due to higher spatial resolution. In this context, Extended Target Tracking (ETT) has grown interest in recent years. However, most existing ETT works are designed for monostatic systems due to the fine time synchronisation or per-node antenna arrays required for ranging and angle estimation in multistatic scenarios. In contrast, this paper proposes a novel approach to extended target tracking in a distributed antenna system, where only bistatic Doppler frequency measurements are available. Doppler-only tracking is particularly attractive as it avoids the two aforementioned issues. To address this Doppler-only extended target tracking problem, we develop a modified Rao-Blackwellised Particle Filter (RBPF) that replaces the standard Kalman update with a particle-specific Extended Kalman Filter update followed by a relinearisation step, handling the non-linearities of both the rigid extended target dynamics and the observation model. Numerical simulations show the effectiveness of the proposed algorithm for accurate extended target tracking under this Doppler-only setting.

0.49

Joint Target-Tag Estimation in Ambient Backscatter-Based ISAC

eess.SP ·2026-10-04 ·Awadhesh Gupta, Kumar Vijay Mishra, Naveen K. D. Venkategowda, Aditya K. Jagannatham
top venuetheory similarity 0.39
Abstract

Integrated sensing and communication (ISAC) has emerged as a key paradigm for unifying radar sensing and wireless communications within a shared hardware and spectral framework. In parallel, ambient backscatter communication (AmBC) has gained attention as a low-power solution for enabling passive connectivity by modulating and reflecting existing radio-frequency signals. Motivated by these developments, this paper investigates an integrated sensing and ambient backscatter communication (ISABC) framework in which a dual-functional radar-communication (DFRC) transceiver jointly performs high-resolution target sensing and low-power tag detection in cluttered environments. Within this ISAC and AmBC setting, we develop a comprehensive system model that jointly captures the estimation of target and clutter parameters, including delay, Doppler shift, and complex reflectivity, together with the recovery of embedded AmBC tag symbols. The resulting DFRC signal model reveals strong coupling among direct-path reflections, clutter echoes, and passive backscatter signals, leading to a highly entangled estimation problem. To address this challenge, we propose a robust three-stage signal processing framework that sequentially estimates target and clutter parameters before detecting the AmBC tag message. This structured approach effectively disentangles the superimposed components, improving both sensing accuracy and communication reliability in ISAC systems. Extensive simulations, benchmarked against the Cramer-Rao lower bound (CRLB), demonstrate the superior estimation performance of the proposed DFRC-based solution. The results further highlight the fundamental trade-offs between sensing accuracy and backscatter communication efficiency in ISABC systems.

0.42