CS Paper Radar

Realistic Characterization and Modeling of Vehicle-Mounted Antenna Radiation Patterns Based on Large-Scale Full-Vehicle Measurements

Guotian Ji, Tianhao Wang, Changhao Xi, Guokai Jiang, Jiaxu Feng, Zhiqiang Yuan, Wei Fan

eess.SP ·submitted 2026-09-29 03:46 UTC · v1

Abstract

Vehicle-mounted antenna radiation patterns can be significantly altered after installation due to interactions with the vehicle body. However, existing studies mainly focus on simulations or isolated antenna characterization, while large-scale experimental investigations remain limited. This paper presents a comprehensive experimental analysis of vehicle-mounted antenna radiation patterns based on full-vehicle spherical near-field measurements. A large-scale dataset covering ten commercial vehicle platforms, multiple antenna mounting locations, and various wireless functions, including 4G, 5G, V2X, and GNSS, is established under a unified measurement framework. Based on the measured results, representative case studies and statistical characterization are performed to investigate the impacts of vehicle installation on antenna radiation behavior. The results reveal substantial variations across mounting locations and wireless functions, highlighting the strong influence of vehicle integration on realistic antenna performance. Furthermore, a novel statistical model is proposed to generate realistic vehicle-mounted antenna patterns using a small set of physically interpretable parameters. The obtained dataset, characterization results, and modeling approach provide a foundation for realistic antenna evaluation and wireless system simulations in vehicular communication applications.

Comment
Under peer-review of the IEEE Journal

Closest papers

Nearest neighbours by meaning across the whole index.

Modeling and Performance Evaluation of Distributed Satellite Antennas: Space Is Much Closer Than One Might Think

cs.IT ·2026-10-07 ·Giacomo Bacci, Riccardo De Gaudenzi, Marco Luise, Luca Sanguinetti
similarity 0.55
Abstract · currently submitted to IEEE Transactions on Aerospace and Electronics Systems (14 figures, 1 table)

Distributed satellites can deliver broadband connectivity directly to commercial handsets. In the formation of arrays (FoA) architecture, cooperating satellites synthesize a large aperture whoseextent depends on their number, arrangement, and spacing, with intersatellite distances ranging from tens of meters to hundreds of kilometers. For representative S-band geostationary and low-Earth-orbit configurations, the Fraunhofer distance may exceed the nadir link range at spacings on the order of a hundred meters. Therefore, accurate assessment of FoA performance across satellite populations and spacings requires spherical-wave modeling for users in the radiative near field, below the formation's Fraunhofer distance. Planar models of satellite positions, array orientations, and user locations must also be assessed against spherical geometries accounting for orbital and Earth curvature. This paper combines these models to quantify how simplifying assumptions affect throughput and outage probability. Numerical results show that multi-antenna precoding based on a local plane-wave approximation within each satellite array closely matches the spherical-wave reference. A global plane-wave approximation can instead cause severe losses, including full outage. In the investigated scenarios, formation curvature has little impact, whereas neglecting Earth curvature overestimates low-Earth-orbit throughput. These findings clarify when geometric and propagation approximations remain reliable and demonstrate that, for large distributed antenna apertures, space is much closer than one might think.

0.21

Human Exposure to Non-Ionizing Radiation from Indoor Distributed Antenna System: Shopping Mall Measurement Analysis

cs.NI ·2026-09-16 ·Júlia da L. A. Silva, Vicente A. de Sousa,, Marcio E. C. Rodrigues, Fred Sizenando Rossiter Pinheiro, Gutembergue Soares da Silva +6 more
publishedhighly cited similarity 0.53
Abstract

It is crucial to monitor the levels of Non-Ionizing Radiation (NIR) to which the general population may be exposed and compare them to the limits defined in the current standards, in view of the rapid rise of communication services and the prospects of a connected society. A high number of people visits shopping malls and since these locations usually have several indoor antennas close to the public, it is therefore a kind of place that must be evaluated. Thus, this work presents measurements of the electric field in a shopping mall located in Natal, Brazil. We proposed a set of six measurement points, following two criteria: places with great the flow of people and the presence of one or more Distributed Antenna System (DAS), co-sited or not with WiFi access points. Results are presented and discussed in terms of the distance to DAS (conditions: near and far) and flow density of people in the mall (scenarios: low and high number of people). The highest peaks of electric field measured were 1.96 and 3.26 V/m, respectively corresponding to 5% and 8% of the limits defined by the International Commission on Non-Ionizing Radiation Protection (ICNIRP) and the Brazilian National Telecommunication Agency (ANATEL).

0.58

Vehicle and UAV Detection and Tracking with LTE Downlink Reference Signals: A Ray-Traced Evaluation on a Mapped Suburban Site with Licensed Base-Station Records

cs.NI ·2026-11-01 ·Arun K. Gurung, Satha K. Sathananthan
similarity 0.53
Abstract · 18 pages, 7 figures, 14 tables. Revised version

Passive sensing on the cellular downlink places the receiver at the user equipment and changes nothing in the network. We report simulation results for an LTE band-3 cell-specific reference signal arm on a ray-traced channel. On a synthetic street canyon the arm is compared with an uplink sounding reference signal arm on the same band, target and scorer: missed-detection probabilities of 0.667 and 0.772. On a surveyed site built from OpenStreetMap footprints and the licensed site record, nine receiver positions along the street track the vehicle at coverage between 29.9 % and 61.7 %; a 283 m lap separates target height from trajectory at 1.6 to 30 m; a 137 m lap on the built-up street tracks a vehicle and a 15 m airborne target on every cell, and 8 receivers at 135 m spacing carry one illuminator's coverage over 1140 m of the street. Potential future work includes extending the analysis to multiple illuminators and varying receiver configurations, and confirmation through over-the-air measurements.

0.34

Coverage Analysis of Large-Scale HAPS Networks Using Directional Beams

eess.SP ·2026-08-15 ·Zhengying Lou, Baha Eddine Youcef Belmekki, Mohamed-Slim Alouini
top venuehighly cited similarity 0.52
Abstract

High-altitude platform stations (HAPS) are pivotal in next-generation wireless networks for reducing core network burdens and enabling cost-effective communication. In this article, we propose a spherical stochastic geometry-based analytical framework for the coverage performance evaluation of HAPS networks. Considering the significant influence of directional antenna gain on interference evaluation, we analyze coverage performance under a general channel model that accommodates various beam patterns. Analytical expressions of the uplink and downlink coverage probabilities in cellular and cell-free networks are provided respectively and their accuracy are verified by Monte Carlo simulation. Furthermore, the influences of network-level and physical-level parameters on coverage probability are studied. Finally, several factors that align with the analytical framework of this article are discussed.

0.69

Modeling Diffuse Scattering in Mobility Scenarios: Ray Tracing Model and Measurement Validation

eess.SP ·2026-10-14 ·Milica Djordjevic, Thomas Wilding, Anja Dakić, Benjamin Rainer, Markus Hofer +1 more
code/data similarity 0.52
Abstract · Submitted to EuCAP 2027

Open-source ray tracing (RT) frameworks are increasingly used for site-specific channel modeling due to their reproducibility and extensibility. In non-stationary mobility scenarios, repeated RT evaluations can generate different diffuse propagation paths without preserving their correspondence, limiting a consistent representation of their temporal evolution. To address this limitation, we extend diffuse scattering modeling in Sionna RT using persistent surface-associated scattering points. Their positions remain fixed, while their contributions evolve according to changes in the propagation geometry and visibility. The proposed approach is validated using empirical radio channel impulse response measurements in an urban vehicular scenario at 5.9 GHz. Compared with the standard Sionna RT baseline, the proposed model shows improved agreement with measurements in the delay and Doppler domains.

0.28

Vertical Assessment of RF-EMF Exposure in a Building Adjacent to a Multi-Operator Shared Base Station

cs.NI ·2026-09-11 ·Ricardo Q. de F. H. Silva, Marcio E. C. Rodrigues, Fred S. R. Pinheiro, Gutembergue S. da Silva, Halysson B. Mendonça +1 more
published similarity 0.52
Abstract

This paper extends a previously published proposed approach for estimating worst-case exposure scenarios in buildings using publicly available Base Station (BS) parameters, applying it to a critical case involving a multi-operator shared site. Radiofrequency Electromagnetic Fields (RF-EMF) exposure was assessed on every floor of a 20-story building facing the site, revealing significantly higher levels near the center of the antennas' estimated vertical zone of interest, with a peak of 31.86 V/m, 23.95 times higher than the street-level peak value. However, due to uncertainties in the input parameters, measurements across all locations within the zone of interest are required to accurately identify the floor of maximum exposure. The results demonstrate the usefulness of the proposed estimation approach and highlight the need for improved methods that consider BS antenna configurations and current technical information to ensure accurate assessments of exposure to RF-EMF.

0.39

Vision Language Models for Radiation Patterns to Antenna Parameters

eess.SP ·2026-09-13 ·Pallaviram Sure, Chandra Mohan Bhuma
similarity 0.51
Abstract · 10 pages, 3 Figures, 9 Tables

Observed radiation patterns often serve as a primary evidence of antenna's behavior, but translating them into meaningful interpretations is a nontrivial and expertise intensive task. This demand necessitates automated pattern interpretation, a diagnosis problem encountered in applications encompassing Radio Frequency (RF) surveillance, non cooperative emitter characterization and Over The Air (OTA) testing. This work addresses the incorporation of Contrastive Language Image Pre training (CLIP) and other recent vision language models to perform such a diagnosis. These models analyze the multimodal data and extract discriminative features directly from radiation pattern images, to train Machine Learning (ML) approaches for meaningful inferences on geometrical and performance parameters of the antenna. Performance of three such vision language models is demonstrated using RadPat 50K, a synthetic dataset of radiation pattern images generated for uniform linear arrays (ULAs). The radiation pattern images are processed by the vision language models to obtain discriminative features. The CLIP extracted features are processed by either ML classification models to infer antenna parameters number of elements, element spacing, weighting scheme, presence of grating lobe and steering angle, or ML regression models to infer parameters beam width, directivity and main lobe direction. ML models achieve accuracies exceeding 70 percent, highlighting the potential of multimodal Artificial Intelligence (AI) towards intuitive antenna analysis.

0.27

Vehicle-Mounted Steerable Wideband Antenna Array for NATO Band III Tactical Radio Links

eess.SP ·2026-09-22 ·Ida Pääkkölä, Mikko Heino, Taneli Riihonen
published similarity 0.51
Abstract · 5 pages, 10 figures, accepted for MILCOM 2026

In this paper, a very compact 2 x 2 wideband beamsteering array with monocone antennas is designed and validated for NATO Band III (1350-2400 MHz) tactical communications with interference suppressing ability. The small 4 x 4 x 4 cm$^3$ size of the array enables placing it for example on vehicles with limited space. The array is manufactured and measured, and the interference suppressing capability thereof is studied with a minimum variance distortionless response beamformer and a phase-only beamformer in the presence of a single interferer. It is shown that the designed antenna array can significantly improve the signal-to-noise ratio over 10 dB for angles separated over 15$^\circ$ from the signal-of-interest, and over 20 dB for separation larger than 43$^\circ$ across the operational band.

0.35