CS Paper Radar

Low-Cost Sensor Calibration for Indoor Air Quality Monitoring: A Dataset, Evaluation Scenarios, and a Lightweight Model

Jinyong Yun, Seokho Ahn, Hyungjin Kim, Sungbok Shin, Young-Duk Seo

cs.LG ·submitted 2026-10-08 04:35 UTC · v1
dataset

Abstract

Low-cost sensors enable scalable indoor air quality monitoring but require calibration because of nonlinear distortions, noise, and temporal drift. The conventional strict pairwise calibration setting requires a co-located reference sensor at each deployment location and does not account for spatial and temporal heterogeneity. To address these limitations, we introduce a six-month dataset comprising multivariate indoor air-quality measurements from low-cost and reference sensors with contextual metadata collected at five locations. Using this dataset, we define four evaluation scenarios. The reference-efficient and location-transfer scenarios evaluate spatial generalization, whereas the long-term drift and event-conditioned scenarios assess robustness to gradual and abrupt distribution shifts. Based on these scenarios, we derive design requirements and propose a lightweight temporal model that combines input-window compression with residual temporal and feature fusion. Experiments show strong calibration performance across all four scenarios with low edge-inference cost.

Comment
8 pages, 3 figures, 7 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Continuous-Time Set-Transformers for Asynchronous WiFi-IMU Indoor Localization

cs.LG cs.AI ·2026-11-09 ·Mohamed Bachar, Ilyass Abouelaziz, Yuehua Ding
published similarity 0.61
Abstract

Indoor localization commonly combines WiFi received signal strength indicator (RSSI) fingerprints with inertial measurements. However, these sensor streams are sampled asynchronously at different rates; therefore, observations rarely align in time and may be missing or stale. Most existing methods resample the data onto a shared clock and process each modality using a separate branch. We instead present a continuous-time transformer that represents observations as an unordered set of timestamped tokens. Each token encodes its measurement, modality, and elapsed time since acquisition. A single attention block jointly fuses information across modalities and time, avoiding both resampling and modality-specific branches while remaining invariant to token order. During training, we randomly mask entire modalities and individual observations, enabling the model to operate under missing or outdated inputs. We validate the modality-specific encoders on their respective benchmarks and evaluate the fused model on both simulated and real datasets, including a crosssession dataset collected on unseen days. The proposed approach improves upon an open WiFi fingerprinting baseline under cross-session drift, remains competitive with learned fusion and dead-reckoning baselines, and degrades gracefully as observations become missing or stale. These results suggest that a single continuoustime transformer provides a practical framework for indoor localization from asynchronous sensors.

0.37

Ray-Traced Augmentation for Signal Strength Based Localization

cs.NI ·2026-08-24 ·Jihoon Og, Ningze Sun, Ioanis Nikolaidis, Omid Ardakanian
similarity 0.60
Abstract · 28 pages

Indoor localization based on Wi-Fi typically relies on extensive collection of real-world received signal strength (RSS) fingerprints, making deployment costly and time-consuming. We present a ray-tracing-based framework that reduces this reliance by generating synthetic RSS fingerprints from a building model. We first calibrate the building model using a small amount of real RSS fingerprints through Bayesian optimization, followed by per-access-point calibration to account for residual errors in simulated RSS values. The calibrated model is then used to generate a large augmented dataset of synthetic RSS fingerprints at arbitrary locations. To effectively exploit these data for localization, we introduce novel binary and multivalued representations of RSS values and a ResNet-based localization architecture that supports cross-band fusion of 2.4 and 5 GHz measurements. We evaluate our localization method on a real campus building against a diverse set of four baselines. When trained exclusively on synthetic data, the proposed method with multivalued representation and upstream cross-band fusion achieves a mean localization error of 3.05m on a real-data test set, outperforming the best baseline by 33.6%. The results demonstrate that calibrated ray-tracing-based simulation can substantially reduce the need for real RSS fingerprints while enabling accurate deep-learning-based indoor localization.

0.13

AirFlow: Context Preserving and Multi-Rate State Modeling for Air Quality Forecasting

cs.AI cs.CEcs.LG ·2026-08-10 ·Fan Yang, Nan Chen, Yijie Dong, Yuchen Zhang, Wei Zhang
similarity 0.59
Abstract · 19 pages, 9 figures

Accurate air quality forecasting is essential for public health and urban environmental management, but remains challenging because pollutant channels differ in periodicity and distribution drift, while their concentration trajectories contain both multi-scale dependencies and rapid changes. Recent methods have improved spatial dependency learning and meteorological covariate modeling. However, pollutant channels are still passed through the same normalization rule and temporal backbone, using a shared latent representation for channel-specific distributions and changes at different rates. To address this limitation, we propose AirFlow, a pollutant-aware dual-stream framework that operates on station multivariate observations without additional graph propagation or predefined signal decomposition. Specifically, AirFlow designs two novel blocks: (1) a statistic-guided normalization routing mechanism that selects a normalization path for each pollutant according to its 24-hour autocorrelation and distribution drift; and (2) a hierarchical dual-stream state model that combines multi-scale state space propagation with learnable response coefficients, where gated bidirectional cross-attention exchanges information and adaptively fuses the resulting representations. Experiments on real-world data from multiple cities show that AirFlow achieves the best performance in 34 of 36 metrics comparisons, with reductions of up to 11.11% root mean square error over the state-of-the-art baseline. AirFlow also requires only 0.0483M parameters and 0.0215G FLOPs, achieving high forecasting accuracy with low computational overhead.

0.10

ChronoChart: Setup-Agnostic Channel Charting for Label-Free Indoor Localization

eess.SP cs.LG ·2026-10-18 ·Majid Sharghi Foroushani, Jonas Pirkl, Jonathan Ott, Maximilian Stahlke, George Yammine +2 more
published similarity 0.58
Abstract · To be published in the proceedings of the 16th International Conference on Indoor Positioning and Indoor Navigation (IPIN)

Accurate radio-based indoor localization remains challenging in multipath-rich and dynamic indoor environments. Supervised fingerprinting methods achieve high positioning accuracy by learning mappings from radio channel measurements to physical locations, but require costly position labels and frequent recalibration. Channel Charting (CC) addresses this limitation by learning low-dimensional representations of Channel State Information (CSI) without position labels, yielding channel charts in which nearby points correspond to nearby physical locations. However, prominent CC methods rely on setup-specific dissimilarity metrics, such as ADP-, CIRA-, or PDR-based distances, and on precomputed $O(n^2)$ distance matrices, limiting scalability and transferability across radio systems. We propose ChronoChart, a timestamp-supervised CC framework that requires only CSI and timestamps without prior knowledge for training. Our method jointly optimizes complementary objectives: a triplet loss using temporally derived positive and negative samples to establish coarse global structure, a temporal-proximity loss that promotes smooth trajectories in the chart, and a joint-embedding loss that enforces consistency between representations of different augmentations. Evaluated on real-world 5G, MIMO, and passive UWB data, our method matches or exceeds prior CC baselines that depend on tailored distance metrics, and remains scalable and applicable across heterogeneous radio systems.

0.22

From Least Squares to Deep Learning: Benchmarking Indoor Positioning on the HYMN Multi-Technology Dataset

eess.SP ·2026-09-22 ·Paul Schwarzbach, Muhammad Ammad
code/data similarity 0.58
Abstract

Indoor positioning benchmarks rarely co-locate multiple technologies with high-accuracy ground truth, limiting cross-method and cross-technology comparison. We evaluate four range-based positioning methods on fused Ultra-wideband, Bluetooth Low Energy, and WiFi ranges recorded at 48 reference points in an industrial facility with available ground truth. The evaluated methods range from least-squares positioning, with and without robust weighting, through a Bayesian grid filter to a ResNet regressor that we report under two protocols, interpolation and spatial generalisation. Per-technology ranging quality spans roughly two orders of magnitude, which caps any geometry-based solver that weighs anchors equivalently. On fused input the grid filter is competitive with deep learning on median error, while the ResNet's advantage concentrates on the upper tail. Holding reference points out of training increases the learned regressor's median error several-fold, exposing a spatial-generalisation penalty invisible under random splits. The dataset and evaluation code are publicly available.

0.20

ADAPT: Physics-Aware Diffusion-based World Models for Adaptive Predictive Transferable HVAC Control

cs.AI ·2026-08-20 ·Xu Yang, Kailai Sun, Dianyu Zhong, Qianchuan Zhao
similarity 0.57
Abstract

Buildings account for roughly one-third of global energy consumption and CO$_2$ emissions. Optimizing indoor climate systems plays a critical role for urban climate mitigation aligned with UN Sustainable Development Goals 11 and 13. However, indoor delayed thermodynamic responses and partial observability severely hinder existing methods, which are primarily limited by implicit thermal inertia, occupancy dynamic prediction, and cumulative prediction errors, especially for out-of-distribution environments. In practice, these challenges are further exacerbated by the high cost and privacy burden of dense indoor sensing, forcing operators to collect only limited data in a single operating regime while expecting controllers to generalize reliably across unseen seasons and climate regions. To address this problem, we propose ADAPT, a physics-aware conditional diffusion indoor environmental world model for HVAC control. The model predicts a short-horizon held-action thermal baseline to capture the latent thermal inertia of the buildings. The diffusion backbone utilizes the robustness of generative models, while a learnable multi-zone heat-balance regularizer constrains generated trajectories to satisfy transferable building thermodynamics without requiring known building geometry or manually calibrated thermal parameters. A credit assignment is then design for the downstream reinforcement learning. Extensive experiments on SemibuildingSim and Sinergym demonstrate that ADAPT reduces HVAC energy consumption by 7.3\% and occupant discomfort by 30.2\% compared with state-of-the-art baselines under IID control. Under OOD control scenarios spanning unseen seasons and climate regions, ADAPT maintains robust performance with only marginal degradation relative to its IID performance, substantially outperforming existing methods in transfer robustness.

0.23

Efficient Deep Learning Adaptation for Cross-Environment RSS-Based Indoor Localization

eess.SP ·2026-09-08 ·Cien Zhang, Jiaming Zhang
publisheddataset similarity 0.57
Abstract

Received signal strength (RSS)-based indoor localization has attracted increasing attention due to its low cost and compatibility with existing wireless infrastructures. However, RSS measurements are highly sensitive to environmental variations, making it challenging for deep learning-based localization models to generalize across different physical configurations. Driven by these challenges, this paper proposes a scenario-adaptive RSS localization framework based on backbone reuse and efficient adaptation. The proposed architecture consists of a lightweight extractor and a shared backbone, where the extractor projects heterogeneous RSS inputs into a unified feature space and the backbone captures transferable localization knowledge. During adaptation, the backbone trained from the source dataset is reused, while the extractor is optimized to adapt to the new dataset configuration. A short optimization stage is further introduced to slightly refine the backbone with a lower learning rate. Experimental results on four datasets demonstrate that the proposed training strategy enables faster convergence and improved adaptation compared with training from scratch. In addition, the proposed framework reduces training time under different dataset configurations, verifying its effectiveness and efficiency for adaptive RSS-based indoor localization.

0.19

Smartphone Indoor Localization Enhanced by Hierarchical Multi-Sensor Context Recognition

cs.LG cs.RO ·2026-10-29 ·Wenhui Feng, Muhan Weng, Jianyu Liu, Xiansheng Yang, Hao Zhang +2 more
similarity 0.57
Abstract

Smartphone indoor localization requires low-cost, robust positioning across scene transitions and phone-use variations. Pedestrian dead reckoning (PDR) enables infrastructure-free deployment but accumulates errors from heading drift, structural transitions, and carrying-mode changes. Existing methods often treat contextual cues as a single event stream or local correction signal, limiting their ability to address distinct localization errors. This paper presents a framework enhanced by hierarchical multi-sensor context recognition. A jointly data- and model-driven recognition model predicts environment, scene, and activity probabilities, which are converted into scene-event and action-context segments. Scene-event segments guide scene-constrained PDR correction through corridor heading constraints, landmark attraction, fixed-lag backtracking, and vertical-transition handling. Action-context segments drive action-aware RoNIN-based position compensation for carrying-mode-dependent drift. Experiments on cross-floor and multi-action trajectories against LiDAR-SLAM references show that the proposed framework outperforms PDR and representative learned inertial odometry baselines, demonstrating that hierarchical semantics provide reliable, localization-specific correction cues.

0.14