CS Paper Radar

Sequential Learning-Based Physics-Informed Neural Network Modeling for Parameter Estimation on a Power Converter

Samuela Rokocakau, Panagiotis Kakosimos, Giulia Tresca, Pericle Zanchetta

cs.LG eess.SY ·submitted 2026-10-14 11:48 UTC · v1

Abstract

A staged physics-informed neural network (PINN) is proposed for identifying the inductance, capacitance and parasitic resistances of a DC buck converter from time-domain data. Gradients are released in the order of L to C to rL to rC, a sequence derived from sensitivity analysis. The five-stage schedule recovers L and C to within 5% and the series ESR to 10%, while a three-stage variant attains the same accuracy 11% faster. An 84 factorial sweep confirms that the trained PINN remains accurate for simultaneous 8% perturbations of all four components, achieving a waveform RMSE of 2.6 x 10-2 over 5 ms-an order-of-magnitude better than a simultaneous-training baseline.

Comment
IEEE ECCE 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Parameter Estimation of Power Electronic Converters with Differentiable Physics Simulation

eess.SY ·2026-08-31 ·Pingjunjin Tan, Chunlin Lv, Jinjun Liu, Yang Li
similarity 0.71
Abstract

This article proposes a differentiable physics simulation (DP simulation)-based parameter estimation method for the condition monitoring of power electronic converters. In the proposed method, the time-domain simulation of converter dynamics is embedded into a differentiable computational graph, directly linking device parameters to observed voltage and current trajectories. By formulating differentiable time-stepping operators, the nonlinear dynamics of the converter across different circuit topologies are simulated in a unified, differentiable manner. A dc-dc buck converter is used as a representative case study. Using sparse transient samples from existing sensing channels, the method enables noninvasive parameter estimation without additional sensing hardware. Comprehensive simulation studies are conducted to evaluate the impacts of time-stepping schemes, regularization constraints, and various uncertainty sources on estimation accuracy and robustness. Subsequently, 30 distinct hardware configurations are experimentally tested for validation. The results show that the proposed method can effectively track the relative variations of health-related parameters across the critical components. This DP simulation framework provides a novel perspective for physics-informed machine learning in power electronic applications.

0.32

Uncertainty-Aware Parameter Estimation for Condition Monitoring of Power Converters

eess.SY ·2026-08-31 ·Tomas Monopoli, Jiahong Liu, Shuai Zhao
similarity 0.62
Abstract

Changes in circuit parameters can indicate component degradation in power converters, but measurement noise and limited parameter observability can make these changes difficult to detect reliably. This paper proposes an uncertainty-aware parameter estimation framework to distinguish genuine parameter changes from variations caused by estimation uncertainty. Using a differentiable switched converter model, the method requires only one or two samples per switching period. Model-derived residual whitening and a Bayesian posterior approximation quantify estimation uncertainty and reveal poorly identifiable parameters. Simulations demonstrate improved estimation accuracy over least-squares and physics-informed neural-network benchmarks, with uncertainty estimates consistent with repeated noise realizations. Experiments on a laboratory buck converter validate the estimated parameters against independently derived references and demonstrate the detection of a controlled output-capacitance reduction. The proposed framework provides a basis for reliable parameter-change detection in power converter condition monitoring.

0.34

Flatness-based Neural Network Control of DC-DC Converters

eess.SY ·2026-09-30 ·Kamakshi Tatkare, Ufuk Topcu, Brian Johnson
published similarity 0.57
Abstract · Accepted to 2026 65th IEEE Conference on Decision and Control (CDC)

In this work, we present a simple method to engineer a small neural network to control power converters. Learning-based methods have emerged as a promising approach for power converter control over wide operating point variations. However, many of these approaches do not exploit the analytical structure of converter dynamics and, therefore, search over unnecessarily broad policy classes. We address this gap with a systematic framework that combines model-based trajectory generation with policy learning. First, we use differential flatness of averaged converter models to generate feasible state and constrained duty cycle trajectories where duty acts as a control effort signal. Then for policy learning, we use these model-generated trajectories to construct labeled state-to-duty data and train a multilayer perceptron to approximate the control law with a static map. We apply this framework across buck, boost, and buck-boost converters through topology-dependent flat output selection and a common learning pipeline. Simulations show close agreement between learned and model-generated duty trajectories and stable regulation under large synchronous input and load disturbances.

0.46

Preliminary Exploration of Large Models Based on Self-Supervised Learning for Health Monitoring of Power Electronic Converters

eess.SY ·2026-10-13 ·Xinyuan Liao, Xiangtian Deng, Yang Liu, Zhaobing Cai, Haoran Wang +1 more
top venue similarity 0.56
Abstract · Accepted by Proceedings of the 2nd Electrical Artificial Intelligence Conference, EAIC 2025

Current artificial intelligence (AI) methods for power electronics converters make limited use of the abundant unlabeled data generated during real-world operation. This underexplored resource holds significant potential for advancing model performance. To address this gap, this paper presents PE-TSFM, a time-series foundation model tailored for power module health monitoring. The model adopts the PatchTST architecture combined with self-supervised learning and is trained on more than 143 million timestamps, where over 98\% of this training data is unlabeled and collected directly from an operating traction converter. In degradation classification tasks, PE-TSFM achieves an accuracy of 87\%, considerably surpassing five conventional time-series AI models whose performance ranges from 27\% to 45\%. These results demonstrate the model's strong few-shot learning capability and generalization across different operating conditions. This work promotes a shift from narrowly focused models in power electronics toward unified, scalable foundation models that can unlock value from large-scale unlabeled operational data.

0.31

Explainable Machine Learning for Multilayer Planar Winding Inductance Estimation

cs.LG ·2026-09-29 ·Spyros Rigas, Theofilos Papadopoulos, Georgios Alexandridis, Antonios Antonopoulos
code/data similarity 0.56
Abstract · 10 pages

Rapid and accurate self-inductance estimation for multilayer rectangle-shaped planar windings is essential for modern high-frequency power converters, yet traditional workflows rely on complex mathematical equations, rigid monomial formulas or unexplainable black-box machine learning (ML) models that degrade severely outside their training domain. This paper introduces an explainable ML framework unifying post-hoc feature attribution (SHAP and permutation importance) with Kolmogorov-Arnold Network-guided symbolic regression via the SR-KAN framework to discover closed-form analytical equations without prior structural assumptions. Evaluated on a new open-source dataset of over 10,000 Finite Element Analysis (FEA) simulations across seven out-of-distribution (OOD) classes, standard tree-based ensembles exhibit severe extrapolation errors (> 36%), whereas the unconstrained SR-KAN expression achieves a robust OOD relative error of 8.22%. Experimental verification across 55 physical printed circuit board prototypes (up to 8 layers, with inductances from 4.11 μH to 559.27 μH) confirms that the KAN-discovered expression translates effectively to real-world hardware, predicting inductance with a mean absolute relative error of 6.26%. To support reproducible research, the complete FEA simulation dataset and prototype measurements are released open-source.

0.37

Physics-Informed Error Field Learning: A Post-Training Optimization Framework for Physics-Informed Neural Networks

cs.LG ·2026-08-25 ·Jiuyun Sun, Yong Zhang
similarity 0.55
Abstract

Physics-Informed Neural Networks (PINNs) have emerged as an important class of numerical methods for solving partial differential equations (PDEs). However, during the late-stage optimization process, further parameter updates often yield diminishing accuracy improvements while increasing computational costs. To address this issue, this paper proposes a Physics-Informed Error Field Learning (PIEFL) framework for PINNs. Unlike conventional approaches that continuously approximate the solution field using a single network, PIEFL introduces an auxiliary error network after the primary network achieves satisfactory accuracy and shifts the learning objective from the solution field to the error field. By deriving error control equations under physical constraints, the error network learns the discrepancy between the current approximation and the exact solution, and the learned error correction is combined with the primary prediction to improve solution accuracy. The proposed framework avoids continuous optimization of the entire solution space and focuses computational resources on correcting existing prediction errors. Moreover, PIEFL requires no modification to the primary network architecture, making it compatible with existing PINN models and applicable as a general post-training optimization strategy. Numerical experiments on representative PDEs demonstrate that PIEFL achieves higher solution accuracy under the same computational budget, validating its effectiveness in improving the performance of PINNs.

0.19

Beyond Accuracy: Physics-Informed Evaluation of ANN-based Power Flow Solvers under System Shift

eess.SY ·2026-11-10 ·Dong Liu, Jochen Stiasny, Jochen Cremer, Pedro P. Vergara
similarity 0.54
Abstract

Recent advances in artificial deep learning-based power flow (PF) solvers have primarily focused on improving estimation accuracy, while their physical feasibility and operational reliability under realistic system variations remain insufficiently evaluated. This paper proposes a physics-informed evaluation framework for deep learning-based PF solvers under topology and load distribution shifts. Beyond conventional voltage-domain errors, the framework incorporates KCL gaps, branch-flow gaps, KVL residuals, continuous feasibility scores, and strict, practical, and relaxed PF feasibility rates. Four case studies are designed to investigate topology shifts, mixed topology training, load distribution shifts, and combined topology distribution shifts. Eight ANN architectures, including graph input models, load-only baselines, and physics-informed neural networks, are evaluated under consistent settings. The results demonstrate that low estimation errors do not necessarily correspond to physically feasible or operationally reliable PF solutions, particularly under combined system shifts. The proposed framework establishes an initial foundation and analysis for the development and verification of trustworthy deep learning-based PF solvers, providing support for their reliable deployment in future AI-enabled power system analysis.

0.09

Newton-PINet: A fast physics-informed neural network with Newton linearization for meta-learning nonlinear PDEs

cs.LG cs.AIcs.CEphysics.comp-ph ·2026-11-16 ·Yuchen Fan, Chang Wei, Pao-Hsiung Chiu, Chin Chun Ooi, Heyang Wang +1 more
top venuebenchmarkcode/data similarity 0.54
Abstract · Accepted at NeurIPS 2026

Scientific machine learning has opened new avenues for solving parameterized partial differential equations (PDEs), enabling models to learn a family of PDEs and generalize to unseen instances. In this context, data-driven operator learning methods typically require large training datasets, while physics-informed neural networks (PINNs) suffer from difficult optimization and limited generalization, especially for nonlinear PDEs. We propose Newton-PINet, a physics-informed network enhanced by Newton linearization, offering an effective meta-learning framework for nonlinear PDEs. Newton-PINet (i) employs a physics-informed multilayer network with skip connections, where the output-layer weights are solved by least squares; (ii) adopts a two-stage learning strategy that first leverages gradient-based training to learn robust representations from the available training tasks, and then performs gradient-free fine-tuning on the output layer for fast task-specific generalization; and (iii) incorporates a Newton linearization method to speed up the least-squares iteration for nonlinear PDE problems. On a challenging nonlinear reaction-diffusion benchmark, Newton-PINet achieves up to three orders of magnitude lower relative error than recent neural solvers, while using 16x fewer training tasks and over an order of magnitude less training time (about 5 minutes versus several hours). This work advances the meta-learning of PINNs toward data-efficient, fast, and generalizable physics solvers. The code and datasets are publicly available at: https://github.com/fycAIwj/Newton-PINet.

0.51