CS Paper Radar

Hexagonal Basis Projectors for Model-Based Iterative CT Reconstruction

Ke Chen, Alireza Entezari

cs.CV ·submitted 2026-10-17 01:27 UTC · v1

Abstract

Image representation affects both the forward model and quantitative feature recovery in model-based iterative CT reconstruction. For isotropically bandlimited signals, the hexagonal lattice is the most sampling-efficient lattice in two dimensions, with greater directional isotropy and a larger alias-free bandwidth than the Cartesian grid at equal density. We develop constant and linear hexagonal projectors for two-dimensional fan-beam CT using box spline calculus. Both bases form a partition of unity on common coefficient centers; the linear tent also reproduces affine functions. We derive analytic ray footprints and effective detector-blur expressions and implement efficient GPU forward and backprojection. On simulated FORBILD data, the linear model improves on Cartesian and hexagonal pixels, with its best noisy-data accuracy at the coarser resolution. Real-world 2DeteCT comparisons use high-dose, high-resolution Cartesian reconstructions as pseudo ground truth and show competitive image and feature agreement. These results establish a practical hexagonal representation for quantitative CT.

Closest papers

Nearest neighbours by meaning across the whole index.

SpectralCTGaussians: Projection-Domain Reconstruction and Basis Material Decomposition for Spectral CT using 3D Gaussian Splatting

cs.CV ·2026-08-29 ·Reinout Vos, Saptarshi Neil Sinha, Michael Weinmann
similarity 0.60
Abstract

Spectral computed tomography (CT) extends conventional CT by measuring attenuation across multiple energy channels, allowing improved modeling of physical X-ray interactions and energy-dependent material behavior and leading to richer scene understanding. We present a novel method for spectral CT reconstruction and basis material decomposition using 3D Gaussian Splatting by adding per-Gaussian basis material fractions to the set of learnable parameters, which together with a set of energy-dependent basis functions define the attenuation across the full spectral range. The basis functions represent various physical attenuation models such as photoelectric absorption and Compton scattering, and are jointly optimized across all energy channels through a differentiable polychromatic forward model, with material decomposition performed via mean-shift clustering of the resulting coefficients. We evaluate our method on a baseline real-world dataset as well as a synthetic dataset that we introduce, comparing against traditional reconstruction algorithms and state-of-the-art learning-based CT reconstruction methods. Our approach outperforms all traditional baselines in novel view synthesis and achieves the best PSNR among all compared methods for spectral CT volume reconstruction, while describing all energy channels with a single shared representation that requires a number of Gaussians comparable to single-channel Gaussian splatting-based CT reconstruction approaches. For basis material decomposition, no traditional or learning-based baseline offers one-step decomposition with direct RGB material segmentation, and our method additionally recovers the photoelectric basis with higher PSNR than traditional pipelines.

0.25

TR-GS: High-Fidelity Sparse-View CT Volumetric Rendering via t-Distribution Gaussian Splatting and Ray-Confidence Modeling

cs.CV ·2026-08-17 ·Zedong Xiao, Yiren Wang, Zhou Liu, Xiaolin Liu, Zhangji Lu
top venue similarity 0.60
Abstract

High-fidelity 3D medical visualization supports applications such as clinical assessment and surgical planning. Sparse-view computed tomography (CT) can reduce projection requirements and associated radiation exposure, but limited observations may introduce structural artifacts and reconstruction uncertainty. Although 3D Gaussian Splatting (3DGS) provides an efficient explicit representation for volumetric rendering, existing CT methods based on standard Gaussian primitives may be sensitive to unreliable observations under sparse-view acquisition. We present TR-GS, a Gaussian-splatting framework for sparse view CT volumetric rendering. TR-GS replaces standard Gaussian primitives with projectable Student's t-distribution primitives and introduces a ray-confidence model that regulates their degrees of freedom according to local ray observability. Confidence-guided 3D wavelet regularization is further used to balance high-frequency detail preservation and noise suppression. This work is licensed under a Creative Commons Attribution 4.0 International License. Experiments on synthetic and real-world datasets show that TR-GS improves over representative baselines in most evaluated settings and remains competitive in the remaining cases. The resulting volumetric representations may support downstream medical multimedia applications, including XR-based visualization and interactive clinical rendering.

0.51

Model-Based Iterative Reconstruction with View-Dependent Detector Displacements for Cone-Beam CT

eess.IV ·2026-09-18 ·Doga Topcicek, Sharmin Majumder, Whitney A. Poling, Dmitriy D. Bruder, Zhili Feng +2 more
similarity 0.60
Abstract · 5 pages, 5 figures

Detector shifting is used in industrial cone-beam computed tomography to reduce ring artifacts, but the resulting detector motion can vary nonuniformly across projection views and produce detector positions that cannot be represented by fixed offsets. Although analytical reconstruction can accommodate this motion, approaches that use projection interpolation or rebinning may limit spatial resolution and introduce artifacts. MBIR provides an alternative by representing the acquisition geometry explicitly within the reconstruction model. Existing separable distance-driven MBIR formulations assume fixed detector geometry across projection views and therefore cannot directly represent nonuniform motion in both detector dimensions, as this motion changes the voxel-to-detector mapping. We extend the separable distance-driven MBIR model to incorporate recorded horizontal and vertical detector displacements into the distance-driven overlap computation while leaving measured projections unchanged. Forward-projection validation achieved an NRMSE of 0.0338 across 1080 views. The proposed model achieved a 3D SSIM of 0.9404 and NRMSE of 0.0406, compared with 0.5396 and 0.1740 for fixed-detector MBIR. A second industrial dataset showed reduced structured artifacts compared with FDK.

0.41

LINGO: Latent Initialization and Gradient Optimization for Sparse-view X-ray Novel View Synthesis and CT Reconstruction with 3D Gaussian Splatting

cs.CV cs.GR ·2026-09-19 ·Lifeng Xing, Dequan Jin, Kunpeng Bu, Peigeng He, Shihui Ying
similarity 0.60
Abstract

In novel view synthesis and Computed Tomography (CT) reconstruction with sparse-view X-ray imaging, insufficient angular coverage leads to structural ambiguity and accumulated noise. Integrating 3D Gaussian Splatting (3DGS) with X-ray absorption physics can achieve promising results, but it suffers from noisy initialization, positional insensitivity, and weak gradients in low-density regions. In this paper, we propose a unified Latent Initialization and Gradient Optimization (LINGO) framework to address these issues. LINGO combines latent mask-space initialization with dynamic gradient optimization to improve point cloud structural completeness while accelerating training. It constructs voxel-level 3D filters from X-ray masks to robustly suppress background noise and provide reliable geometric priors. By employing an adaptive voxel scaling strategy and dynamically scaling loss, LINGO can adjust spatial resolution and explicitly amplify gradients in low-density structures. To evaluate the quality of initialization, we introduce the Initialization Point Cloud Structural Deviation (IPSD) metric. Experiments on the X3D dataset indicate that for the novel view synthesis task, LINGO improves the Peak Signal-to-Noise Ratio (PSNR) and Structural Similarity Index (SSIM) by an average of 0.72 and 0.0039, respectively, over baselines under identical sparse-view settings, achieving comparable reconstruction quality within 5k steps to state-of-the-art models typically trained with 30k iterations. For the CT reconstruction task, LINGO also demonstrates consistent improvements, with average PSNR and SSIM gains of 0.36 and 0.0134. These results highlight LINGO's effectiveness in both accelerating training and enhancing reconstruction quality across different sparse-view imaging scenarios.

0.37

Task-driven sparse-view planar X-ray computed tomography for axial metrology

eess.IV cs.CV ·2026-11-01 ·Yibin Tian, Shuming Yang, Wolfgang Heidrich
similarity 0.59
Abstract

Computational imaging can reduce the acquisition burden when the system is designed around task-relevant information rather than complete image recovery. We investigate this framework for sparse-view planar X-ray tomography (XCT) of layered objects, using measurement of the axial termination gap (ATG) of back-drilled printed-circuit-board (PCB) vias as a representative task. Instead of using 3D reconstruction, the proposed method estimates ATG directly from polychromatic projection data through a physics-based sensitivity model. A gated hierarchical estimator first fits ATG together with radiometric perturbations and selectively introduces global geometry and specimen-warp models only when a reduced chi-squared adequacy test and Bayesian information criterion justify the added degrees of freedom. The same low-dimensional perturbation model is incorporated into marginalized Fisher-information analyses, yielding task-specific conditional and calibration-aware Cram'er-Rao bounds. Numerical experiments show that, under a fixed total photon budget, task-driven metrology changes little over 12-64 views, while reconstruction-driven metrology is strongly view-dependent with much larger errors. The direct estimator also follows the expected photon-limited scaling. These results demonstrate a computational sensing strategy in which XCT acquisition, physical modeling, and inference are evaluated according to the quantitative information required by the task rather than for general-purpose volumetric image fidelity.

0.25

Shape-guided Gaussian Splatting for Sparse-View X-ray 3D Reconstruction

cs.CV ·2026-09-09 ·Pranav Poudel, Florence Dell'Aniello Picard, Nairouz Shehata, Frédéric Lavoie, Herve Lombaert
publishedcode/data similarity 0.58
Abstract · Accepted at: Off-Grid: 1st Workshop on Continuous Representations and Grid-Free Methods in Medical Imaging, MICCAI 2026

Sparse-view X-ray 3D reconstruction is essential for reducing radiation exposure, but recovering a density field from a handful of X-ray projections is severely ill-posed. Recently, 3D Gaussian Splatting has achieved state-of-the-art performance in sparse-view reconstruction by representing the volume using explicit, optimized primitives, but it requires dozens of projected views. With fewer views, reconstruction quality degrades severely since the explicit primitives are optimized freely without any anatomical information. Anatomical structures, in contrast, share similar geometry and density across a population. Their variations are bounded within a limited range that statistical shape models can capture. This paper proposes a shape-guided Gaussian splatting framework for sparse-view X-ray 3D reconstructions. Our contribution lies in driving Gaussian positions toward anatomically valid configurations, alongside atlas-based density regularization. Our method ensures anatomically consistent reconstruction and improves PSNR by 2.83 dB over a state-of-the-art Gaussian splatting baseline with as few as 5 views. Code Available: https://github.com/polyshape-lab/ShapeGuidedGaussian

0.46

Taming Neural Fields with a Frequency-Lipschitz Curriculum for Sparse-View CT Reconstruction

cs.CV cs.LG ·2026-11-11 ·Songtao Hu, Jingrui Wu, Hong Ding, Fanhao Zhu, Yunhao Liu +1 more
similarity 0.58
Abstract

Sparse-view computed tomography (SVCT) reduces radiation dose by acquiring fewer projection views, but the resulting under-determined inverse problem requires careful regularization to prevent reconstruction algorithms from fitting streak artifacts and hallucinated structures. Existing implicit neural representation (INR) methods rely on implicit spectral bias or iterative external denoising, yet they provide limited control over when high-frequency capacity is exposed during optimization. To address this limitation, we propose FLIC (Frequency-Lipschitz INR Curriculum), a capacity-controlled self-prior INR framework that makes the network's representational capacity explicit and schedulable. The core of our method is a joint frequency-Lipschitz curriculum that couples random Fourier feature encoding with spectrally normalized MLP decoding under non-uniform Lipschitz budgets, guiding reconstruction along a coarse-to-fine trajectory from stable global anatomy to fine details. The terminal capacity is automatically calibrated from FBP gradient statistics, enabling scan-adaptive regularization without per-scan manual tuning of the terminal Lipschitz budget. We further introduce a prior-guided adaptive ray sampling strategy that concentrates integration samples near high-gradient anatomical boundaries, improving forward-model fidelity. The entire framework operates in a single training stage without iterative denoising, enabling efficient per-image reconstruction. Extensive experiments on four public CT datasets under noise-free and low-dose settings show that our method achieves state-of-the-art unsupervised reconstruction quality with consistent performance across diverse anatomical structures.

0.13

PSF-Informed Reconstruction: An Enhanced 2D Directional Filtered Backprojection Method for Cone-Beam Rotary Computed Laminography

cs.CV ·2026-10-31 ·Chengxiang Wang, Wei Yu, Baodong Liu
similarity 0.57
Abstract

Cone-beam rotary computed laminography (CL) presents a viable alternative to cone-beam CT for imaging objects with high aspect ratios. Conventional reconstruction techniques, such as CL-FBP and CL-FDK, often yield suboptimal results charac?terized by pronounced superimposition artifacts, reduced contrast,and blurred edges, primarily due to their reliance on 1D row-wise filtering along detector rows. To address these limitations and improve reconstruction quality, we proposed a novel 2D directional filtered backprojection (DFBP) method based on the point spread function (PSF). First, an exact expression for the projection process is derived by establishing the relationship between a reconstructed pixel and its corresponding projection point on the detector. Second, a revised backprojection process incorporating two weighting factors is introduced to counteract the nonlinearity inherent in conventional backprojection, leading to a simplified PSF formulation. Third, to circumvent the computational burden of 3D image space filtering,an approximate method by linearizing the coordinate relationship in Fourier space under some assumptions is developed that transfers the 3D filtering operation to the 2D projection space. This approach facilitates the derivation of a formally simple yet effective 2D direc?tional filter, which integrates a 2D von Hann window and a 2D sinc window. Experimental results demonstrate that the proposed method produces reconstructions with superior contrast, sharper boundaries,and fewer superimposition artifacts compared to CL-FBP and CL?FDK. Moreover, it enables more accurate recovery of internal structures, such as bubble defects and electronic components.

0.30