CS Paper Radar

Sensitivity-Orthogonal Residual Learning for Adaptive Sideslip and Cornering Stiffness Estimation

Kyoungtae Ji, Dongyeol Won, Kyoungseok Han

cs.RO cs.LGeess.SY ·submitted 2026-10-20 03:53 UTC · v1

Abstract

Online adaptation of the cornering stiffness keeps a model-based sideslip estimator valid as tires change, but competes with learned model correction for the same filter innovation. A corrector with enough parameters can absorb the innovation pattern that a stiffness change produces, and adaptation is suppressed while the fit improves. We propagate the stiffness sensitivities of the predicted measurements through the vehicle states and construct a corrector orthogonal to them. A null-space parameterization enforces the constraint without a penalty coefficient and preserves the static least-squares stiffness estimate on each identification segment. In full-vehicle simulation, the stiffness response of the unconstrained corrector declines as its parameter count grows, whereas the orthogonal corrector responds at least as fully as the uncorrected filter at all sizes and lowers sideslip error by 12.7% to 22.0%. In a simulated drive with a stiffness step, the orthogonal corrector adapts as quickly as the uncorrected filter and lowers sideslip error during and after the transient. On public real-vehicle data, the 430-parameter unconstrained corrector loses most of its response to deliberate offsets of the filter's nominal stiffness, whereas the orthogonal corrector of the same size retains most of it, with a sideslip error slightly above the uncorrected filter's.

Comment
25 pages, 15 figures, 5 tables. Submitted to Vehicle System Dynamics

Closest papers

Nearest neighbours by meaning across the whole index.

Scalable Identification of Physics-Based and Neural Dynamics from Partial Measurements

eess.SY cs.LGmath.OC ·2026-10-12 ·Yibo Zhou, Johannes Köhler
code/data similarity 0.53
Abstract · The code is available at https://github.com/YiboFrankZhou/Scalable-PEM-MHE

We present a scalable method for identifying nonlinear dynamics from partial measurements, supporting physics-based, neural-network, and gray-box models. We use the Prediction Error Method (PEM) coupled with state estimation performed by a Moving Horizon Estimation (MHE) scheme, which can account directly for general nonlinear dynamics. This results in a bi-level optimization problem that scales poorly with increasing model parameters. To improve computational efficiency, we derive a reformulation that avoids explicit parameter-wide sensitivity matrices and exploits the temporal structure of the underlying optimization problem. Numerical comparisons show up to a $215\times$ speedup in hypergradient evaluation. Racing-vehicle simulations demonstrate accurate prediction and physical-parameter recovery in tire-force identification. Real-world data show that the gray-box model improves prediction accuracy with a neural residual while retaining physical interpretability.

0.47

Simulation Modeling and Control of an Elastic Shaping Antagonistic Variable Stiffness Actuator

eess.SY ·2026-11-05 ·Yuanlong Ji, Ruizhe Jiang, Dongrun Jin, Xiangyu Xie, Junheng Lin +1 more
similarity 0.52
Abstract · 29 pages, 11 figures. Extends the structural study in arXiv:2609.18456 (ACIRS 2026) with dynamic modeling and closed-loop control evaluation

Position--stiffness regulation of antagonistic variable stiffness actuators (VSAs) involves coupled nonlinear dynamics, parameter uncertainty, and feedback states that are not directly measured. This paper addresses this challenge through a simulation-based workflow that integrates elastic shaping, model verification, and layered nonlinear control. This study builds on a previously developed actuator comprising two crossed four-bar compliant transmission elastic units. Its optimized elastic mapping provides the structural basis, with an ADAMS torque-curve root mean square error (RMSE) of $2.57\,\mathrm{N\!\cdot\!mm}$ against the target. A control-oriented analytical model is implemented in Simulink and compared with the independently executed ADAMS model under matched inputs. The maximum joint-angle RMSE across the tested cases is $4.66\times10^{-3}\,\mathrm{rad}$. A layered controller combines extended Kalman filtering for state reconstruction, feedback linearization for nominal decoupling, and adaptive sliding-mode control for residual compensation. At the end of the nominal simulation, the joint-angle error is approximately $3.14\times10^{-5}\,\mathrm{rad}$. The stiffness error is $3.07\,\mathrm{N\!\cdot\!mm/rad}$ relative to a target of $50\,\mathrm{N\!\cdot\!mm/rad}$. Parameter-variation and ablation tests assess tracking performance and the effects of the controller modules within the evaluated conditions. The resulting workflow links structural-response modeling, state estimation, and robust control assessment, supporting repeatable comparisons beyond nominal tracking alone.

0.24

LLA-MPC on Embedded Hardware: Rapid Adaptive Control with Thousands of Parallel Models

cs.RO eess.SY ·2026-10-02 ·Henry Z. Liao, Maitham F. AL-Sunni, John M. Dolan
publishedcode/data similarity 0.51
Abstract · This work has been accepted in the Sim2Real and Classical Control: From Rigorous Theory to Data-Driven Robotics Workshop at the 2026 IEEE/RS…

We present a generalized implementation of Look-Back and Look-Ahead Adaptive Model Predictive Control (LLA-MPC), a learning-free framework for real-time, rapid adaptive system identification and control. The original formulation was demonstrated only in simulation, for autonomous racing with a fixed model structure. Our implementation has modular dynamics and integrators, and we validate it on the F1TENTH platform under constrained computation and noisy state estimation. The system identifies tire parameters online by evaluating thousands of candidate models in real time on an embedded computer. Experiments with low-friction tires across changing surfaces show that LLA-MPC completes high-speed tracking tasks where a fixed nominal model fails. Code, videos, and our related work are available at: https://lla-control.github.io.

0.56

High-Speed Forward and Reverse Tractor-Trailer Driving with Learned Vehicle Dynamics

cs.RO eess.SY ·2026-11-15 ·Aaron Chen, David Shen, Taekyung Kim, Kaleb Ben Naveed, Dimitra Panagou
code/data similarity 0.51
Abstract · The first three authors contributed equally to this work. Project page: https://ds12a.github.io/drift-with-trailer/

Tractor-trailer systems are difficult to control, especially unstable during reverse motion, and their dynamics depend on difficult-to-measure factors, including road friction and suspension coefficients. We introduce a learned dynamics model for tractor-trailer control and compare it with a reduced-order dynamics model with Fiala tire forces as an analytic baseline. Specifically, we compare a model predictive path integral (MPPI) controller that uses the learned dynamics model to an MPPI controller that uses the analytic model, as well as to three additional baseline controllers. In the main closed-loop tracking experiments across four simulated environments, MPPI with learned dynamics achieves mean speeds closer to the target magnitudes and lower root-mean-square (RMS) hitch angles than MPPI with the analytic model at every tested setpoint, with higher completion rates in seven of eight reverse configurations.

0.17

Vehicle Drift Emergence: Continuous Evolution from Grip Driving to the Handling Limit via Boundary Exploration Learning Model Predictive Control

cs.RO ·2026-08-28 ·Sheng Zhao, Binh-Minh Nguyen, Hangyu Lu, Xiaodong Wu
similarity 0.51
Abstract

Automated drift controllers commonly track a prescribed drift equilibrium, sideslip reference, or trajectory. These formulations establish how to execute drift, whereas the continuous transition from grip driving to drift near the handling limit remains unresolved. This paper defines drift emergence in a repetitive lap time minimization task, where neither the controller objective nor the reward contains an explicit drift reference. A boundary exploration learning model predictive controller (BE-LMPC) constructs an empirical safe set and a locally shifted terminal cost from completed laps. By iteratively improving spatial speed allocation under a fixed global speed bound, the controller progressively explores larger sideslip and yaw rate envelopes while preserving recoverability. As lap performance improves, sustained sideslip and pronounced yaw motion emerge while the rear axle approaches saturation. Analysis shows that, when external conditions vary smoothly, the transition from tire adhesion to sliding does not itself cause abrupt changes in tire force or vehicle state. The combined-slip Fiala model satisfies this continuity condition at the transition. At a tire road friction coefficient of 0.6, lap time decreases from 49.95 s on Lap~3 to 25.50 s on Lap~12, with drift first emerging on Lap~11. Lap~12 reaches 16.5$^\circ$ sideslip and 0.894 rear axle utilization. In contrast, no drift is detected for friction coefficients from 0.8 to 1.2; at 1.2, a similar peak speed is achieved with only 0.483 rear axle utilization. These results characterize drift as a conditional continuation of limit handling that emerges when increasing performance demand approaches the available tire capacity, rather than as a separately prescribed motion mode.

0.32

Sparse Regression Distilled from a Single Robust Fit

cs.LG stat.MLstat.ME ·2026-09-20 ·Wooyoung Shin, Seunghwan Park
similarity 0.50
Abstract · 68 pages, including appendices; 8 figures

Robust linear fits can resist response contamination yet remain too dense or unstable for useful global explanations. We propose penalized distillation, which fits a smoothly clipped absolute deviation (SCAD) estimator to a robust initial estimator's empirical fitted surface along a safeguarded coordinate-descent path and evaluates candidate states separately for fidelity, parsimony, perturbation stability, and held-out prediction. The new results attach to the states the algorithm actually computes. Conditional on a fixed uncontaminated design, deterministic bounds transfer response-replacement boundedness from the initial fit to every retained path state. Turning to fixed dimension, we characterize the oracle-support branch by its empirical-Gram projection and influence function, give conditions for covariance-weighted least-squares approximation equivalence, and establish a path-conditional generalized information criterion. By contrast, at large dimension-to-sample ratios the full-coordinate robust fit collapses without warning, and screening restores the construction. Under a sure-screening framework, the robustness bound and the support and selection guarantees transfer to the screened fit. Simulations separate robustness transfer from support recovery, efficiency, and computation across the dimension-to-sample ratio, with p up to 240, and the signal density, which isolates what the sparse stage adds once the screen over-selects. In a duplicate-grouped superconductivity study, the distilled estimator remains predictively stable under prespecified training-response shifts but retains 66.8--68.8 of 81 slopes. Stronger sparsification reduces the model to 12.6--14.0 slopes only at visible fidelity and prediction cost. Distillation therefore preserves predictive stability on these data without substantiating a compact coordinate-level explanation.

0.35

Robust Model Reference Adaptive Control with Combined Adaptation under Finite Excitation Condition

eess.SY ·2026-08-23 ·Manish Patel, Arnab Maity
similarity 0.50
Abstract

In adaptive control, parametric uncertainties in linear-in-parameter form consist of unknown parameters and known regressor signals. Convergence of the unknown parameters to their ideal values requires the regressor to satisfy a persistent excitation (PE) condition, which depends on future data and is therefore infeasible to guarantee online. Memory-based parameter update laws address this by enabling ideal parameter convergence under the online-verifiable finite excitation (FE) condition. In this paper, a new algorithm is proposed to construct a memory term via the Modified Gram-Schmidt orthogonalization procedure for a class of multi-input multi-output nonlinear systems with an unknown diagonal control effectiveness matrix and bounded nonparametric uncertainties. Under the finite excitation condition, the constructed memory term yields an identity coefficient matrix in the parameter estimation error dynamics. The identity coefficient matrix eliminates the need for time-varying adaptation gains, enables an explicit ultimate bound on the parameter estimation error, and preserves the structure of the nonparametric uncertainty bound under the memory term. Building on this, a combined adaptation law is developed for controller gain estimation under FE. The closed-loop tracking and estimation errors are shown to decay exponentially to a neighborhood of the origin, characterized by an explicit ultimate bound, with a decay rate that depends solely on user-defined gains and system constants, independent of the level of regressor excitation. This removes the dependence of the convergence rate on the level of regressor excitation, a key limitation of existing approaches such as concurrent learning, memory regressor extension, and DREM.

0.24

On Stochastic Continuous-Time Linear System Identification for Adaptive Stabilization

cs.LG stat.ML ·2026-11-02 ·Reza Sadeghi Hafshejani, Mohamad Kazem Shirani Faradonbeh
similarity 0.49
Abstract

System identification studies the canonical problem of reliably learning system-dynamics from state and input trajectories. One of its important applications consists of estimating a feedback gain matrix that can stabilize an unknown system. This paper focuses on the analysis of such adaptive stabilization schemes for multivariate linear time-invariant state-space models. The system instability practically renders trajectories short, i.e., the observed data is notably limited. So, it is crucial to tightly consider effects of \emph{all} involved quantities including length and number of trajectories, dimension, controllability Gramian, and signal-to-noise ratio. We put forward a simple, practical, and reliable relationship between the chance that adaptive stabilization (based on system identification) fails to stabilize the system, in terms of all the above-mentioned quantities. Our findings show that despite exponential effects of all other quantities on failure probability, such effects do not hold for signal-to-noise ratio. More specifically, this study shows that the strength of the excitation signal helps stabilization only \emph{logarithmically}; a very important phenomenon that we explain under the term \emph{signal saturation}.

0.29