CS Paper Radar

An Absolute Acoustic Readout of Plate Wave Speed for Bullion Authentication, Using a Measured Fill-Factor Correction for Struck Coins

Sylvia Dong, Takyiu Liu

eess.AS physics.class-ph ·submitted 2026-10-21 04:29 UTC · v1
unusual

Abstract

Acoustic "ping" testing of bullion is empirical: it compares a coin's ringing frequency with frequencies recorded for the same coin type, so it cannot assess a specimen absent from the reference library. This work replaces the comparison with an absolute measurement, computed from the measured resonance and geometry through a physical model rather than retrieved from a library. Free-plate flexural resonance is calibrated on five machined aluminium discs ($a/t=2.58$--$10.75$), recovering an empirical finite-thickness coefficient $β=0.895\pm0.047$ that reduces the worst-case departure from thin-plate theory from 8.9% to 0.75%. A fill factor, the ratio of a coin's displaced volume to its nominal cylinder, supplies the effective thickness that relief hides from calipers, extending the calibration to struck coins. The readout is the plate wave speed $c_{p}=\sqrt{E/ρ(1-ν^{2})}$, a material constant, conditioned on an assumed Poisson's ratio. On six struck 0.999 copper rounds not used in the calibration it recovers a Young's modulus of $119.1\pm6.7$ GPa, inside the accepted 110 to 128 GPa. The recovered wave speeds form distinct observed groups across the measured specimens, with the strongest independent validation provided by these copper rounds. The $(3,0)/(2,0)$ mode ratio falls below its thin-plate value in thirteen of sixteen specimens (one-sided sign test, $p=0.011$), as finite-thickness theory predicts. Weighing displaced mass to 0.1 mg rather than 0.1 g cut per-specimen volume uncertainty from 1.6% to 30% to 0.5% to 2.6% and shrank an apparent 11% design-dependent bias to a 4.7% residual on one deeply relieved silver design. The readout is now limited by tabulated elastic constants and the assumed Poisson's ratio, not by the acoustics, which are reproducible to 0.15%.

Comment
16 pages, 9 figures, 10 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Spatial Thickness Mapping in Heterogeneous Plate Using Wave Physics-Informed Regression

eess.SP ·2026-10-01 ·Amanda Beck, Harsha Vardhan Tetali, Michael MacIsaac, Charlie Tran, Woohyun Eum +2 more
similarity 0.41
Abstract

Traditional guided wave methods for structural health monitoring typically assume uniform material properties, which limit their ability to characterize heterogeneous structures with spatially varying thickness, damage, or material properties. These are challenges commonly encountered in corrosion assessment, composite delamination detection, and structural degradation monitoring. This paper presents a wave physics-informed regression approach that enables spatially resolved characterization of material properties by extracting local dispersion curves across a structure. Our approach focuses on a highly interpretable but flexible physics-informed framework that can be solved using fast algorithms and achieve robust numerical solutions. This paper discusses the mathematical design of the framework, the algorithm, and its interpretation. The framework was applied to a guided wave wavefield imaging dataset from a thin aluminum plate with non-uniform thickness around a hole to validate its practicality. The framework creates an accurate thickness map (correlation coefficient 0.94 with x-ray CT validation) as well as extracts the frequency-dependent velocities of waves within those regions.

0.25

Evaluation of effective wave velocities in polycrystalline materials using the ultrasonic reflection matrix

eess.IV physics.app-ph ·2026-09-22 ·Gatien Clément, Alexandre Aubry, Cécile Brütt, Benoît Gérardin, Claire Prada
unusual similarity 0.41
Abstract · 13 pages, 14 figures

In-depth characterization of heterogeneous materials has long been a challenge in non-destructive testing. Here, a method is proposed to determine the elastic constants of metallic polycrystalline materials using back-scattered ultrasound. The waves scattered by the microstructure are analyzed to image the effective bulk velocities. To this end, a reflection matrix is acquired with an array of transducers. The projection of this matrix onto a focused basis is used to estimate an average point spread function. Optimizing this function with respect to the propagation model leads to an estimation of the longitudinal velocity. Additional treatments are developed to adapt the method to map the shear wave velocity. The local Poisson's ratio is then deduced from the ratio between those two velocities. Young's modulus and shear modulus can also be obtained assuming known densities. This matrix approach is experimentally validated on different polycrystalline materials. A sample displaying heterogeneous mechanical properties is then simulated to assess the accuracy and the resolution of the method. Its strengths and limitations are discussed, demonstrating its potential for quantitative non-destructive material characterization.

0.30

Identifying the Shear Piezoelectric Coefficient using Physics-Informed Neural Networks under Exact Boundary and Initial Constraints

cs.LG physics.comp-phcond-mat.mtrl-sciphysics.app-ph ·2026-11-02 ·Suhas Suresh Bharadwaj
similarity 0.40
Abstract · 19 pages, 9 figures

The shear piezoelectric coefficient $e_{15}$ governs the shear-mode electromechanical coupling in piezoelectric micromachined ultrasonic transducers (PMUTs) and surface acoustic wave (SAW) devices, but measuring it typically requires destructive resonance testing on dedicated specimens. On simulated data, $e_{15}$ can instead be recovered non-destructively from sparse, noisy subsurface wavefield observations using a constrained physics-informed neural network (PINN). By building exact spatial distance functions and temporal multipliers directly into the network output, the clamped, grounded boundaries and resting initial state hold automatically, leaving the loss with only the interior equations of coupled electro-elastodynamics and the data misfit. Non-dimensional scaling brings all governing coefficients within one decade of O(1), and the setup removes the boundary and initial-condition penalty weights that soft-constraint methods must tune. In a six-way comparison (plane-strain PZT-5H, manufactured wavefield, 30 dB noise), a soft-penalty baseline with adaptive weights converges to an erroneous $e_{15}$ in four of the five runs (51.7% mean error), and fixed penalties reach an error of 0.85% only after a second-order optimization stage. The constrained formulations reach mean $e_{15}$ errors between 0.15% and 0.51% with held-out displacement errors below 1%. Within these variants, the spatial multiplier gives rapid first-order convergence, and the quadratic temporal multiplier lowers the early-time electrostatic residual by a factor of 6.8 versus a linear one. On finite-element data along one subsurface line, the full formulation recovers $e_{15}$ with 1.19% mean error at 30 dB and keeps it between 0.65% and 2.71% across a 40 to 0 dB noise sweep. Finally, training on displacements alone still recovers $e_{15}$ with mean errors of 0.45% on finite-element and 1.64% on manufactured data.

0.27

AcoustiClaim: A Numeric Claim Benchmark with Instrument Ground Truth

cs.SD cs.CLcs.LGeess.AS ·2026-09-24 ·Sheng-Tse Lin, Siyuan Zhai, Chien-Liang Kuo, Massa Baali, Bhiksha Raj
benchmarkcode/datahot direction similarity 0.39
Abstract · 5 pages, 3 figures, 2 tables. Submitted to ICASSP 2027. Siyuan Zhai and Chien-Liang Kuo contributed equally. Code and outputs: https://githu…

Audio language models state numbers for acoustic quantities, and neither human opinion nor a judge model says whether such a number is true of the signal. AcoustiClaim extracts each numeric claim from free text, scores it against the instrument that defines the quantity, and classes each quantity by where its reference can be read. Four open-weight systems and one closed model, asked for ten quantities five ways on two corpora, fill 207 cells. Of these, 49 emit fewer than five distinct values, and eight of the 158 cells that can be ranked exceed a rank correlation of 0.3, the bar we set, three with an interval clear of it, five of them one closed model reading pitch. Error sits at or above a constant-predictor floor in every ranked cell but three. The reference decoder we train declines the five voice quantities in prose on 95% of mixtures, with nothing withheld, and states them on the clean twins, reproducing its targets' rule from audio alone. With a calibrated threshold, withholding lowers error on all ten quantities on the mixtures in the mean and on eight at every split, against at most 0.6% from a random selector. A linear baseline orders errors at least as well as ours. F0 s.d. and shimmer stay above the constant floor.

0.52

Blind tests of a simple-body model of submarine target strength on open benchmarks

eess.AS cs.SDeess.SP ·2026-11-19 ·Sunil Tyagi
unusual similarity 0.39
Abstract · 17 pages, 6 figures, 9 tables, Data: https://doi.org/10.57967/hf/11704

Finite-element and boundary-element models of a submarine's sonar echo need a mesh and a solver, and their cost grows quickly with frequency. SSR-Sim takes an analytical route. The hull is cut into a few simple bodies, the echo of each is a closed-form result of geometrical acoustics or of the Kirchhoff approximation, the surface enters through a plane-wave reflection coefficient, and the echoes add in energy. This paper describes the method, including the reduction of a hull and its sail to simple bodies, and tests it on three open cases. (1) The reflection coefficient of a 50 mm rubber tile on steel plating, computed with finite elements by Yang et al., is reproduced to 0.02 rms or better at incidence angles from 0° to 75° once the layer is allowed to refract. (2) For the rigid full-scale BeTSSi submarine at 1 kHz, a prediction fixed before the reference was opened agrees with the boundary-element results of Venås and Kvamsdal to within 0.7 dB in every aspect sector from the bow to 150°; in the stern sector it is 5 dB high. (3) For a 1:15 BeTSSi model with 10 mm tiles measured in a lake, a second blind prediction is within -3.1, +1.4 and -0.5 dB of the measured level over aspects 0-120° at 5, 15 and 20 kHz, against -3.1, +3.1 and +3.5 dB for the Kirchhoff-finite-element computation published with the measurement. At 10 kHz, on a resonance of the tile, the prediction is 6.9 dB low, and in the bow sector it is 7 dB or more low at every frequency. The tests cover the specular component and the coating model only. The failures show what such a model lacks: edge diffraction and the returns that set the off-beam floor of a real model.

0.37

Sensing Bone-Conducted Speech with Earbuds

eess.AS ·2026-09-02 ·Christoph Weyer, Peter Jax
published similarity 0.38
Abstract · 14 pages, 12 figures, journal

Clear capture of the wearer's own voice (OV) is essential when using earbuds for mobile communication. However, OV capture remains challenging in noisy environments. Bone-conducted (BC) speech, which can be sensed as vibrations of the earbud housing, can be used to improve OV capture. However, neither bandwidth nor spatial characteristics of OV-induced earbud vibrations have been analyzed in detail, despite both characteristics being relevant, e.g., for sensor choice and placement. This study investigates both characteristics, based on measurements with two earbud models. Spectrally, results indicate that OV-induced earbud vibrations exhibit a low-pass characteristic, with a steep roll-off of -93 dB per decade above 400 Hz. Thus, sensors with comparatively low noise floors are required to sense the vibrations above \SI{1}{\kilo\hertz}. Spatially, results indicate that the earbuds mainly vibrate in and out of the ear canal entrance, with high consistency between subjects and fits. Simulations confirm that this enables capture of the high-power vibrations below 400 Hz by a single-axis sensor with less than 1.5 dB mean attenuation.

0.39

Timbre Analysis of the Hulusi, a Southwestern Chinese Free-Reed Instrument, using Machine Learning

cs.SD cs.LGnlin.AOphysics.data-an ·2026-09-14 ·Yang Xia, Rolf Bader
code/dataunusual similarity 0.37
Abstract

The hulusi is a wind instrument that was invented in Yunnan Province, China, and has become tremendously popular in recent years. It consists of a mouthpiece, a gourd, and three bamboo tubes, all with free reeds made of copper. The main bamboo tube in the middle has seven finger holes. In this instrument, the pipe length, not the free reed's eigenfrequency, determines the instrument's pitch, unlike, for example, with the Western accordion or the blues harp. In this study, a machine learning model implemented in the COMSAR framework (https://github.com/ifsm) was used to investigate the timbre characteristics of the \emph{hulusi} to cluster different instruments and pitches. The measured \emph{hulusi} pitches C, B, A, G, and F were analyzed according to seven psychoacoustic features, among which only the spectral centroid, sharpness, and fractal correlation dimension are shown to form pitch clusters. These timbre features were used to train Kohonen self-organizing maps (SOMs) for clustering. Brightness and sharpness analysis revealed that the highest pitches were less bright and less sharp than mid- and low-range pitches were. Furthermore, the fractal correlation dimension, which mainly determines the chaoticity of the initial transients, was the best-clustering timbre feature for the hulusi, with the highest pitches showing the least chaoticity. This result is supported by defining a cluster quality index for the SOMs.

0.42

Selecting and verifying load-bearing periodic cells for elastic-wave band gaps with numerical acceptance checks

cs.CE physics.comp-ph ·2026-11-10 ·Shaoliang Yang, Jun Wang
code/dataunusual similarity 0.37
Abstract · 34 pages, 11 figures; includes supplementary material

A lattice mount must be stiff enough to support equipment and block vibration over a specified frequency range. Fast simulations help rank designs, but their errors can lead to a wrong acceptance decision. We present AMM (AgenticMetamaterials), an open-source Python tool that searches repeating cubic cells for targets on stiffness, the fraction of the cell that is solid, and band gaps. A complete band gap is an interval with no elastic-wave propagation in any direction. A separate checker allows for changes as the simulation grid gets finer. For gaps, it also tests for modes at sampled wave directions and wavelengths, so it can miss modes between samples. In 1,500 near-threshold tests of stiffness and solid fraction, the checker accepted 454 of 750 claims supported by the reference and none of the 750 false claims. Using the finest grid estimate alone accepted 42 false claims. In an independent finite-element comparison on ten new cells built from cubes joined by bars, the checker accepted one of two true gap claims and left all 17 false claims undecided. The reference could not classify the remaining claim. The protocol required every reported edge to err on the side of a narrower gap. The checker failed this test when it placed one upper edge too high, even though it left that thin-bar cell's claim undecided. Separating search from acceptance shows which targets the evidence supports and where a calculation needs further refinement.

0.55