CS Paper Radar

Passive RF Sensing for People Counting with Dense IoT Networks

Federica Fieramosca, Vittorio Rampa, Michele D'Amico

eess.SP ·submitted 2026-10-21 12:15 UTC · v1

Abstract

Radio Frequency (RF) convergence, the joint use of radio signals for both communication and sensing, is gaining increasing attention in research and industry, mostly for its potential in Internet of Things (IoT) applications. By using RF signals of opportunity, such as those generate by the wireless networks, RF sensing exploits the effects of human bodies on the electromagnetic waves to detect both people presence and their movements without requiring wearable devices. In this paper, we address the problem of estimating the number of people in a monitored area covered by several RF nodes of a wireless network: to this aim, we propose a composite diffraction-based model, namely C-MAM, to capture the cumulative RF attenuation induced by multiple human bodies. Building on this model, we derive the analytical resolvability bounds that quantify the maximum number of distinguishable individuals based on the layout geometry and other physical characteristics of the wireless network. These bounds allow for the pre-deployment assessment of RF sensing performance under different scenarios.

DOI
10.1145/3714394.3756220

Closest papers

Nearest neighbours by meaning across the whole index.

People effects on IoT indoor wireless channel characterization

cs.NI ·2026-09-28 ·Millena Michely de Medeiros Campos, Mateus de Oliveira e Mattos, Rafael da Silva Macedo, Alvaro Augusto Machado de Medeiros, Wellerson Viana de Oliveira +1 more
publishedunusual similarity 0.62
Abstract

Wireless communication under 1 GHz is suitable for Internet of Things (IoT) applications due to larger coverage capability with less power consumption. Bearing in mind that people and elements contained in the environment can cause variations in the channel, this paper aims to evaluate the effect of the presence of people on a 900-MHz indoor narrowband wireless channel, as we characterize the small-scale phenomena. With the increase in the number of people, a greater variation in the communication channel was noticed, which is reflected in the parameters of the probability distributions used in the characterization of the random part of the signal. In addition, second-order statistics were used to analyze the data and an adherence test was applied to confirm the behavior of the signal in relation to the distributions.

0.41

Human Mobility Sensing Using Wall-Reflected Beamformed Millimeter-Wave Communication Signals

eess.SY ·2026-11-04 ·Tony DiMichele, Raees Matheen Mullah, Christian Lopez Garcia, Zahra Najafi, Mohammed E. Eltayeb
similarity 0.58
Abstract

Existing millimeter-wave (mmWave) communication beam patterns spatially weight human-scattered signals and shape the received-power signatures induced by human motion. We exploit these beam-shaped signatures for device-free walkingpace and walk-direction classification using a wall-reflected 60.8-GHz link with closely spaced phased arrays and fixed communication beamforming vectors. Human movement alters the interference between wall-reflected and scattered signals, producing power oscillations surrounding a central blockage fade. A beam-dependent interference model provides a physical interpretation of these signatures. Using received-power statistics from a continuous-tone experiment, we extract fade duration for walking-pace classification and pre/post-fade asymmetries for walk-direction classification. Measurements comprise 144 crossings from three participants along perpendicular and diagonal trajectories. Under leave-one-participant-out validation, logistic regression achieves 86.1% binary and 79.2% three-class walking pace accuracy, and 77.1% travel-direction accuracy. The results demonstrate mobility sensing using fixed communication beams without channel estimation, Doppler processing, or dedicated radar hardware

0.27

Bistatic Delay-Doppler Sensing for 3D Target Localization in Distributed Wi-Fi Systems

eess.SP cs.IT ·2026-10-11 ·Kyungmin Hong, Moein Ahmadi, Thomas Stifter, Mounim A. El Yacoubi, Bhavani Shankar Mysore R
published similarity 0.54
Abstract · 6 pages, 6 figures, 2 tables. Accepted for presentation at the 1st IEEE Conference on Integrated Sensing and Communications (ISAC), Lisbon, …

This paper investigates how bistatic delay information improves the observability and localization performance of 3D moving targets in distributed Wi-Fi sensing. Motivated by emerging IEEE 802.11bf WLAN sensing, we consider one transmitter, multiple distributed receivers, and a single target with unknown position and velocity. We compare Doppler-only sensing with delay-Doppler sensing, in which delay-capable receivers provide additional bistatic path-length information for target localization. We derive the Fisher information matrix (FIM) and the position equivalent FIM (EFIM) for both sensing formulations. The resulting observability analysis shows that Doppler-only localization generically requires six receivers, whereas delay-Doppler localization can become locally identifiable with three receivers under non-degenerate geometry. We further study mixed receiver architectures in which only a subset of receivers provides delay estimates. Simulations with Wi-Fi-like bandwidths confirm the transition and quantify the roles of bandwidth, Doppler noise, receiver geometry, and delay-capable receiver availability.

0.32

Physics-Bounded mmWave Sensing for Schedulable, Privacy-Preserving Human Pose Estimation

cs.HC ·2026-08-14 ·Shuntian Zheng, Hongyang He, Jiaqi Li, Xiaoman Lu, Doeon Kim +4 more
similarity 0.54
Abstract

Millimeter-wave (mmWave) is a promising modality for human pose estimation (HPE) in mobile deployments with strong privacy requirements and limited resources, such as fall detection in bathrooms or activity monitoring in bedrooms, where cameras are inadmissible and computationally demanding processing is infeasible. Although mmWave signals naturally confine human reflections to compact, physically bounded regions, the algorithmic foundations of existing systems fail to provide deterministic execution and accuracy guarantees. They either process the full spectrum uniformly, resulting in unpredictable latency that varies across different scenes, or apply lossy compression that discards vital pose structures. To address this, we present PRISM, a framework that exploits the spatial concentration of RF reflections to achieve schedulable edge HPE. PRISM introduces three core components: 1) Physics-Bounded Integral Processing (PBIP), which restricts computation via constant-time integral queries; 2) Physics-Adaptive Instance Proposal (PAIP), which decomposes scenes involving multiple people into bounded local subproblems; and 3) Deadline-Aware Operation Profiles (DAOP), which provide offline-verified worst-case bounds for runtime quality-latency trade-offs. We evaluate PRISM on four public datasets spanning diverse radar configurations, reporting physical-bound and pose-accuracy measurements across this suite and examining deadline-aware scheduling on multi-person recordings together with an additional single-person set. Under single-threaded isolated execution, PRISM reduces 99th-percentile latency by 24\%--58\% relative to baselines that miss the deadline, records a 0.0\% miss rate on the evaluated traces, and attains the highest pose accuracy among deadline-feasible configurations, providing a practical route toward schedulable mmWave sensing on mobile edge hardware.

0.04

RT-VSS: In-House Ray Tracing for Vital Signs Sensing in FR3 Band

eess.SP ·2026-09-14 ·Rudranil Chattopadhyay, Zhuangzhuang Cui, Achiel Colpaert, Sofie Pollin
similarity 0.54
Abstract · Submitted to the IEEE conference for potential publication

Vital Signs Sensing, enabled by the evolution of wireless communications, is inherently challenging as the chest's micro-Doppler signatures can be corrupted by multipath, body movement and noise. Additionally, the prospects of the Frequency Range (FR) 3 band, spanning 7-24 GHz, are compelling due to centimeter-scale wavelength improving phase sensitivity to chest motion, while its abundant bandwidth and rich multipath enhance temporal and spatial diversity. In this paper, we validate the feasibility of using cellular communications in the FR3 band to monitor a human's breathing and heartbeat in an indoor environment. Using Blender to model physiologically accurate vital-signs signals as ground truth and Sionna Ray Tracing simulations, we find that it is feasible to extract breathing and heartbeat waveforms at FR3 frequencies. Furthermore, we perform a comparative analysis of ISAC performance against representative sub-6 GHz (FR1) and mmWave (FR2) frequencies, indicating the utility of the study across the frequency bands.

0.26

Human Exposure to Non-Ionizing Radiation from Indoor Distributed Antenna System: Shopping Mall Measurement Analysis

cs.NI ·2026-09-16 ·Júlia da L. A. Silva, Vicente A. de Sousa,, Marcio E. C. Rodrigues, Fred Sizenando Rossiter Pinheiro, Gutembergue Soares da Silva +6 more
publishedhighly cited similarity 0.54
Abstract

It is crucial to monitor the levels of Non-Ionizing Radiation (NIR) to which the general population may be exposed and compare them to the limits defined in the current standards, in view of the rapid rise of communication services and the prospects of a connected society. A high number of people visits shopping malls and since these locations usually have several indoor antennas close to the public, it is therefore a kind of place that must be evaluated. Thus, this work presents measurements of the electric field in a shopping mall located in Natal, Brazil. We proposed a set of six measurement points, following two criteria: places with great the flow of people and the presence of one or more Distributed Antenna System (DAS), co-sited or not with WiFi access points. Results are presented and discussed in terms of the distance to DAS (conditions: near and far) and flow density of people in the mall (scenarios: low and high number of people). The highest peaks of electric field measured were 1.96 and 3.26 V/m, respectively corresponding to 5% and 8% of the limits defined by the International Commission on Non-Ionizing Radiation Protection (ICNIRP) and the Brazilian National Telecommunication Agency (ANATEL).

0.58

A comparison between ceiling-mounted FMCW, IR-UWB and Wi-Fi radar for in-bedroom human activity monitoring and sleep interruption detection

cs.LG ·2026-08-20 ·Anton Lambrecht, Reda El Hail, Xianjun Jiao, Pieter Crombez, Dominique Schreurs +3 more
similarity 0.53
Abstract · This paper has been submitted to IEEE Access Journal and is currently undergoing review

Despite their growing importance for contact-free radio frequency (RF) based healthcare monitoring, different radio technologies such as frequency-modulated continuous wave (FMCW) radar, impulse radio ultra-wideband (IR-UWB), and Wi-Fi sensing are rarely compared under identical deployment conditions, as existing studies typically differ in hardware, datasets, and evaluation methodologies. In addition, the performance of ceiling-mounted radars, despite their practical deployment and cost advantages in healthcare environments, remain underexplored. Therefore, this paper presents a controlled comparison and analysis of ceiling-mounted FMCW, IR-UWB, and Wi-Fi sensing using synchronized recordings from 20 participants across six room layouts. All technologies are evaluated with the same convolutional neural network (CNN) on both a fine-grained 10-class human activity recognition (HAR) task and a coarse 4-class sleep monitoring task. IR-UWB achieves the highest cross-subject activity recognition performance (89.0% macro F1), while FMCW generalizes best to unseen room layouts (83.8% macro F1). For sleep monitoring, all technologies exceed 92% macro F1 in unseen environments. The results reveal a fundamental trade-off between recognition performance and environmental robustness, which can be explained through differences in range resolution, antenna diversity, Doppler resolution, and spatial information retention. These findings provide practical guidelines for the design of healthcare-oriented RF sensing systems.

0.24

Scene Reconstruction Using Ubiquitous Wireless Signals via Diffusion Posterior Inference Over physics-Grounded Representations

cs.LG ·2026-10-15 ·Vahid Yazdnian, Yasaman Ghasempour
similarity 0.53
Abstract

Knowing the layout of the physical world matters for many applications, yet the sensors we rely on for it (e.g., cameras and LiDAR) can fail in darkness, in adverse weather, or behind walls. Wireless signals do not face these limitations: every link between a base station and a user is shaped by the buildings it passes, reflects from, or is blocked by, leaving information about the surrounding scene embedded in the wireless channel measured at the endpoints. However, mapping channel measurements to the environment is a severely ill-posed problem: a measurement records only the structures that interact with the transmitted electromagnetic waves along its propagation paths, and even these observations can often be explained by multiple plausible scenes. We therefore formulate wireless scene reconstruction as posterior inference and develop a hierarchical framework with two complementary stages to approach this problem. A wireless foundation model, pretrained to respect propagation physics, transforms each channel measurement into a representation of the scene structure that shaped the observation. A diffusion model then jointly integrates representations from multiple measurements to model and sample the posterior over building occupancy, with consensus over samples producing the final reconstruction. We demonstrate that the framework can accurately recover building footprints from wireless channel measurements alone and show that its performance depends critically on both design components: physics-grounded representations expose scene-relevant information, while joint posterior inference coherently integrates complementary observations.

0.17