CS Paper Radar

People effects on IoT indoor wireless channel characterization

Millena Michely de Medeiros Campos, Mateus de Oliveira e Mattos, Rafael da Silva Macedo, Alvaro Augusto Machado de Medeiros, Wellerson Viana de Oliveira, Vicente Angelo de Sousa Junior

cs.NI ·submitted 2026-09-28 19:58 UTC · v1
publishedunusual

Abstract

Wireless communication under 1 GHz is suitable for Internet of Things (IoT) applications due to larger coverage capability with less power consumption. Bearing in mind that people and elements contained in the environment can cause variations in the channel, this paper aims to evaluate the effect of the presence of people on a 900-MHz indoor narrowband wireless channel, as we characterize the small-scale phenomena. With the increase in the number of people, a greater variation in the communication channel was noticed, which is reflected in the parameters of the probability distributions used in the characterization of the random part of the signal. In addition, second-order statistics were used to analyze the data and an adherence test was applied to confirm the behavior of the signal in relation to the distributions.

Journal ref
Revista Principia, v. 1, n. 53, p. 141-149, 2021
DOI
10.18265/1517-0306a2020v1n53p141-149

Closest papers

Nearest neighbours by meaning across the whole index.

Passive RF Sensing for People Counting with Dense IoT Networks

eess.SP ·2026-10-21 ·Federica Fieramosca, Vittorio Rampa, Michele D'Amico
similarity 0.62
Abstract

Radio Frequency (RF) convergence, the joint use of radio signals for both communication and sensing, is gaining increasing attention in research and industry, mostly for its potential in Internet of Things (IoT) applications. By using RF signals of opportunity, such as those generate by the wireless networks, RF sensing exploits the effects of human bodies on the electromagnetic waves to detect both people presence and their movements without requiring wearable devices. In this paper, we address the problem of estimating the number of people in a monitored area covered by several RF nodes of a wireless network: to this aim, we propose a composite diffraction-based model, namely C-MAM, to capture the cumulative RF attenuation induced by multiple human bodies. Building on this model, we derive the analytical resolvability bounds that quantify the maximum number of distinguishable individuals based on the layout geometry and other physical characteristics of the wireless network. These bounds allow for the pre-deployment assessment of RF sensing performance under different scenarios.

0.27

How Temporal Dispersion of Radio Channels Depends on Signal Bandwidth

eess.SP ·2026-11-02 ·Jarosław Wojtuń, Tomasz Grasza, Cezary Ziółkowski, Jan M. Kelner, Aniruddha Chandra +5 more
publishedhighly cited similarity 0.56
Abstract · 5 pages, 6 figures, 2 tables, 6 equations

The degree of temporal dispersion of a radio channel is the basis for assessing its transmission capabilities. This paper addresses the practical issue of measuring the temporal parameters of a signal transmitted in the millimeter-wave (38 GHz) range. These parameters provide the basis for assessing the degree of dispersion of the received signal. The measurement results show that both the mean and RMS values of the delay spread depend on the distance between the transmitter and receiver as well as the bandwidth of the transmitted signals. The function description of these relationships (model) is determined based on a statistical analysis of the obtained measurement data obtained in a selected indoor corridor under line-of-sight conditions.

0.53

Human Exposure to Non-Ionizing Radiation from Indoor Distributed Antenna System: Shopping Mall Measurement Analysis

cs.NI ·2026-09-16 ·Júlia da L. A. Silva, Vicente A. de Sousa,, Marcio E. C. Rodrigues, Fred Sizenando Rossiter Pinheiro, Gutembergue Soares da Silva +6 more
publishedhighly cited similarity 0.53
Abstract

It is crucial to monitor the levels of Non-Ionizing Radiation (NIR) to which the general population may be exposed and compare them to the limits defined in the current standards, in view of the rapid rise of communication services and the prospects of a connected society. A high number of people visits shopping malls and since these locations usually have several indoor antennas close to the public, it is therefore a kind of place that must be evaluated. Thus, this work presents measurements of the electric field in a shopping mall located in Natal, Brazil. We proposed a set of six measurement points, following two criteria: places with great the flow of people and the presence of one or more Distributed Antenna System (DAS), co-sited or not with WiFi access points. Results are presented and discussed in terms of the distance to DAS (conditions: near and far) and flow density of people in the mall (scenarios: low and high number of people). The highest peaks of electric field measured were 1.96 and 3.26 V/m, respectively corresponding to 5% and 8% of the limits defined by the International Commission on Non-Ionizing Radiation Protection (ICNIRP) and the Brazilian National Telecommunication Agency (ANATEL).

0.58

Statistical Analysis of Primary and Random Clusters in 318 GHz Terahertz Channels for Industrial IoT

eess.SP ·2026-08-26 ·Siyuan Shao, Peize Zhang, Pekka Kyösti, Trung Q. Duong, Simon L. Cotton
unusual similarity 0.53
Abstract

The ultra-high data rates enabled by terahertz (THz) communications pave the way for the demanding requirements of industrial Internet of Things (IIoT) applications, making the investigation of THz channels in industrial environments a critical research topic. This paper presents a comprehensive statistical analysis of the propagation channel at 318\,GHz in an industrial environment. In particular, a new clustering scheme is proposed for the sparsity observed in the multipath components (MPCs) of the measured channel. Furthermore, statistical analyses are conducted separately for the group of strong reflections, defined as primary clusters, and other propagation phenomena, defined as random clusters, in a rich-scattering environment. The results demonstrate that the large-scale parameters are predominantly influenced by these strong reflections. This study provides reliable support and guidance for subsequent THz stochastic channel modeling.

0.27

Adaptive Channel Hopping for IEEE 802.15.4 TSCH-Based Networks: A Dynamic Bernoulli Bandit Approach

cs.NI ·2026-08-21 ·Nastooh Taheri Javan, Masoud Sabaei, Vesal Hakami
publishedhighly cited similarity 0.49
Abstract

In IEEE 802.15.4 standard for low-power low-range wireless communications, only one channel is employed for transmission which can result in increased energy consumption, high network delay and poor packet delivery ratio (PDR). In the subsequent IEEE 802.15.4-2015 standard, a Time-slotted Channel Hopping (TSCH) mechanism has been developed which allows for a periodic yet fixed frequency hopping pattern over 16 different channels. Unfortunately, however, most of these channels are susceptible to high-power coexisting Wi-Fi signal interference and to possibly some other ISM-band transmissions. This interference manifests itself in the form of the presence/absence of other devices with either or both static and dynamic channel selection policies. In order to isolate channels with undesirable conditions, blacklisting mechanisms are defined to adapt the channel hopping process. However, the existing solutions which form blacklists unrealistically assume that the statistical model of the external interference remains fixed, and do not vary over time. In this paper, we realistically assume that the impact of external interferes on 802.15.4 may generally follow a non-stationary pattern, and accordingly formulate the adaptive channel hopping problem as a Dynamic Multi-Armed Bernoulli Bandit (Dynamic MABB) process from the machine learning theory. We then propose an online learning algorithm with track-ability properties for computing an adaptive hopping policy. Simulations confirm that when the statistics of the external interference has a switching regime, the proposed solution outperforms the previous schemes in terms of both energy efficiency as well as two important KPIs for TSCH-based networks, i.e., PDR and latency.

0.62

Multi-Band Indoor MIMO Channel Measurements Across Sub-6 GHz, Mid-Band and mmWave: Comparing 2.55 GHz, 12.75 GHz and 25.5 GHz

eess.SP ·2026-11-11 ·Faruk Pasic, Florian Kiss, Florian Asperger, Diego Dupleich, Stefan Schwarz +1 more
published similarity 0.47
Abstract · Submitted to the 21th European Conference on Antennas and Propagation (EuCAP), 2027

Future wireless systems for indoor applications are expected to extend their operating frequencies from sub-6 GHz to mid-band and millimeter wave (mmWave) frequencies to support higher data rates. To characterize the frequency-dependent propagation behavior across these bands, multi-band channel measurements are essential. In this work, we conduct double-directional multiple-input multiple-output (MIMO) channel measurements in an indoor environment to enable a consistent comparison across three frequency bands. Measurements are performed using a 16x16 MIMO configuration at center frequencies of 2.55 GHz, 12.75 GHz and 25.5 GHz, covering both line-of-sight (LOS) and obstructed line-of-sight (OLOS) conditions. The measured channels are processed using the space-alternating generalized expectation maximization (SAGE) algorithm to extract multipath parameters, which are subsequently used to characterize the angular power distributions across the three frequency bands. The results show substantial angular-domain similarity across all three bands in both LOS and OLOS conditions, while also highlighting frequency-dependent variations.

0.31

Wideband Channel Measurements in the Lower FR3 Band (6-12 GHz) for Industrial Environments

eess.SP ·2026-10-30 ·Faizan Rauf, Adam Umra, Oways Alsoloh, Aydin Sezgin
code/data similarity 0.47
Abstract

The upper mid-band, also known as Frequency Range 3 (FR3), spans 7.125-24.25 GHz and is a key candidate band for sixth-generation (6G) wireless communications. However, channel measurements in industrial environments remain scarce, and the 3GPP indoor-factory (InF) channel model, developed for omnidirectional antennas, has yet to be validated across the FR3 band. This paper presents a wideband channel measurement campaign in an industrial production hall, covering 135 line-of-sight (LOS) positions at 1-18 m and 30 non-line-of-sight (NLOS) positions behind an industrial robot at 2.5-16.5 m across 6-12 GHz. In LOS, the path-loss exponent ranged from 1.87 to 2.12, and the close-in fits agreed with the 3GPP InF-LOS model to within approximately 2 dB. However, shadow fading was only 1.4-1.7 dB, compared with the model's 4.3 dB. In NLOS, the robot caused an excess loss that increased from 10.3 to 13.0 dB between 6.5 and 11.5 GHz, consistent with diffraction. Blocking the direct path raised the mean directional delay spread from approximately 5 to 25 ns, close to omnidirectional values. These results indicate that the 3GPP InF model captures mean LOS path loss well but overestimates the variability of beam-aligned FR3 links, and that blockage loss in FR3 is frequency dependent. The dataset and processing code are publicly available.

0.28

Directional and Quasi-Omnidirectional Indoor Channel Measurements at Upper 6 GHz

cs.ET cs.IT ·2026-10-10 ·Chengsong Fu, Hongbo Zhao, Jianer Zhou, Xiongbin Yu, Weichao Li +4 more
similarity 0.46
Abstract

This paper presents wideband indoor channel measurements and measurement-based statistical modeling of channel parameters in the upper 6 GHz (U6G) band using directional and quasi-omnidirectional antenna pairs. Measurements span 6.425-7.125 GHz at 32 matched positions per configuration in an open hall and an L-shaped corridor. System calibration and frequency-dependent peak-gain normalization retain antenna radiation-pattern weighting. Close-in and floating-intercept models are fitted to line-of-sight (LOS) and non-LOS (NLOS) path loss, respectively. Shadow-fading residuals, RMS delay spread (DS), and equivalent K factors derived from power delay profiles are characterized. LOS exponents range from 1.98 to 2.14. Despite similar attenuation slopes, directional links exhibit smaller LOS residuals and DS and higher equivalent K factors. Hall DS medians are 1.78 and 36.52 ns for directional and quasi-omnidirectional links. Corridor NLOS slopes are -1.12 and 2.54, respectively, while DS ordering varies by position. These results characterize antenna-dependent parameters for U6G indoor channels.

0.12