CS Paper Radar

Implementation and Validation of Mismatch-Tolerant High-Gain OTA with a Calibrated Negative Conductance Load

Mayank Aggarwal, Naveen Kadayinti

eess.SP ·submitted 2026-10-29 09:36 UTC · v1

Abstract

This paper presents the circuit-level implementation of a mismatch-tolerant high-gain operational transconductance amplifier (OTA) using automatic negative-conductance calibration in 65-nm CMOS. The technique enhances OTA gain by compensating for its finite output conductance using a cross-coupled transistor pair, with an on-chip calibration loop that eliminates the need for a replica circuit or external tuning. The calibration routine increases the gain by driving the steady state error of the OTA in a unity gain feedback loop toward zero. The implementation addresses practical challenges involving comparator offset, DAC design, and subtractor gain and offset. A 6-bit capacitive DAC (CDAC)-based comparator offset calibration scheme enables reliable detection of the sub-millivolt steady state error required for high OTA gain. Post-layout Monte Carlo simulations show that the comparator offset standard deviation is reduced from 4.11 mV to 132 $μ$V, with a maximum observed post-calibration offset of 625 $μ$V. The complete calibration circuitry is implemented and evaluated through post-layout simulations.

Comment
6 pages, 13 figures

Closest papers

Nearest neighbours by meaning across the whole index.

NEMESIS2.0: LLM-Aided Netlist-Driven Performance Equation Modeling for Accelerated Analog Circuit Sizing

cs.AR ·2026-11-13 ·Subhadip Ghosh, Ramesh Harjani, Sachin S. Sapatnekar
code/data similarity 0.54
Abstract · This paper is under review in the IEEE Transactions on Computer-Aided Design of Integrated Circuits & Systems (TCAD) : 14 pages

This work presents NEMESIS2.0, an open-source LLM-aided framework that automatically derives equation-based performance models for analog circuits. The resulting equations provide fast, accurate surrogates for SPICE evaluation. To validate the method, equation-based models are developed for seven circuit test cases in a commercial 65nm CMOS technology, covering 15 metrics on five operational transconductance amplifier topologies, and six metrics on two dynamic comparator topologies. When tested on 1000 unseen variants of these seven designs, each corresponding to a different set of independently sampled transistor sizes, the accuracy is found to be within 5% of SPICE. To demonstrate use cases for NEMESIS2.0, the generated models are used as performance evaluators in multiple transistor sizers based on different population-based stochastic search optimizers. For each of the seven test cases, transistor sizing is performed for 100 different sets of performance specifications, with final SPICE simulation confirming that 83.3% of the resulting designs meet all specifications after a single sizing run. The rest fail to meet the specifications due to discrepancies between the model and SPICE, and require iterative resizing under tightened specifications; all such scenarios meet specifications within five iterations. Within the transistor sizers, this equation-based performance analysis evaluates ~400 design candidates per second, versus 0.14 candidates per second for SPICE-based evaluation, achieving 196-238x sizing runtime speedup, including final SPICE verification.

0.26

A Timing-Robust Frequency-Interleaved ADC with Embedded Analog Fourier Transform

eess.SP ·2026-10-02 ·Xingchen Chao, Yunqiang Xu, Qiang Yu, Christian Adam, Qiang Li
similarity 0.54
Abstract

Timing errors represent a fundamental challenge in high-speed analog-to-digital converters (ADCs). This paper presents a frequency-interleaved architecture with inherent robustness to timing errors. The frequency interleaving is achieved by an embedded analog Fourier transform (AFT), allowing accurate channel spacing. The charge-based passive AFT is able to share the capacitor array with the capacitive DAC of the subsequent data conversion. A circuit implementation for the complex-valued irrational coefficients in the AFT matrix is proposed, which eliminates the device-ratio-induced systematic errors. Measured at 10b 13GS/s, the calibration-free ADC achieves 45.8-dB SNDR and 56.1-dB SFDR at Nyquist. The ADC consumes 26.4mA from a single 1V supply, resulting in a Walden FoM of 12.7 fJ/conv.-step.

0.25

SMART-AIMC: Sensitivity-Aware Mixed ADC Resolution with Fine-Grained Tunability for Analog In-Memory Computing

cs.AR cs.AI ·2026-11-01 ·Yung-Chin Chen, Ourania Stouraiti, Naveen Verma
similarity 0.50
Abstract

Analog In-Memory Computing (IMC) is a promising paradigm for accelerating GEMM-based AI workloads by executing computations directly within the memory array in the analog domain. While IMC delivers substantial energy and throughput improvements, it can suffer from significant task accuracy degradation due to analog-to-digital converter (ADC) quantization noise, which occurs at the GEMM output and is thus different from weight/activation quantization, which occurs at the GEMM input. Mixed ADC resolution allows IMC modules to choose between high- and low-resolution ADC modes with different energy costs, offering a compelling accuracy-energy trade-off. However, selecting ADC resolutions across IMC units while respecting hardware granularity constraints remains challenging. In this paper, we propose SMART-AIMC, a Sensitivity-aware Mixed ADC Resolution framework with fine-grained Tunability for Analog In-Memory Computing. SMART-AIMC correlates the algorithmic task loss to hardware ADC quantization noise in the form of an ADC Channel Sensitivity (ACS) metric. Using this metric, SMART-AIMC systematically, and in a disciplined manner, allocates ADC resources to critical computations. Furthermore, we introduce a sensitivity-based channel reordering scheme that overcomes the hardware granularity constraints with no runtime overhead and approaches the optimal ADC quantization possible for the model. Evaluated across diverse workloads, SMART-AIMC unlocks a superior accuracy-energy Pareto frontier, providing (1) higher task accuracy at matched energy budgets and (2) fine-grained tuning across efficiency targets, from aggressive energy savings to near-digital inference accuracy. At the latter operating point, SMART-AIMC achieves $6.99\times$ higher modeled system-level energy efficiency for linear projections than the INT8 digital baseline with negligible accuracy degradation.

0.23

SimSkip: StrongARM-Comparator Similarity Sensing with SAR-Skipping-Aware Training for Analog Compute-in-Memory

cs.AR ·2026-09-21 ·Yufei Liu, Junjie Wang, Shuang Liu, Yang Wang, Yang Liu
similarity 0.47
Abstract · 5 pages, 6 figures, 3 tables. Submitted to the IEEE International Symposium on Circuits and Systems (ISCAS) 2027

Analog-to-digital conversion dominates the energy and area of analog compute-in-memory (CIM) accelerators. This paper presents SimSkip, a successive-approximation-register (SAR) skipping scheme that combines a lightweight StrongARM-comparator similarity detector with SAR-skipping-aware training. When two held voltages are similar, the upper bits of the preceding code are reused to skip SAR comparisons. Detector-induced disturbance extracted from 55-nm CMOS simulations and bit-exact prefix saturation are embedded in the forward pass, and the network learns to tolerate them through quantization-aware training and knowledge distillation. On an ISAAC-based W4A4 WRN-28-10, SimSkip achieves 77.23% CIFAR-100 top-1 accuracy (mean of three seeds) versus 78.4% for the baseline, while reducing SAR comparisons by 48.2% across three hardware-modeled layers. A first-order model estimates a 27.2% net ADC energy reduction after detector overhead.

0.28

OTTER - Two Transistor - One RRAM Architecture for Reliable In-Memory-Computing in 28 nm CMOS Technology

cs.ET ·2026-09-08 ·Yang Chen, Daniele Storelli, Xinyi Zhao, Ankit Bende, Paul-Philipp Manea +18 more
similarity 0.46
Abstract

This work presents OTTER, a 28 nm CMOS platform co-integrated with TaOx-based valence-change mechanism (VCM) RRAM, demonstrating a two-transistor-one-memristive-device (2T1R) architecture for reliable in-memory computing. The 2T1R cell combines a low-drive-current (LD) transistor and a high-drive-current (HD) transistor in parallel, providing dedicated bias paths for SET programming and RESET operation, respectively. Through systematic experimental and simulated comparison of various transistor-pairing configurations using the physical compact model JART VCM Rth, design guidelines for transistor sizing are derived, establishing the minimum RESET transistor W/L required for complete RESET as a function of the SET current compliance. The 2T1R cell is further characterized under pulse-based programming, demonstrating multilevel analog conductance tuning with narrow, well separated conductance states across six programmable levels. An analog content-addressable memory (aCAM) design based on the same 2T1R cell is additionally analyzed at the circuit level, evaluating trade-offs between top- and bottom-connected RRAM comparator configurations. A hardware implementation of compute-in-memory (CIM) multiply-and-accumulate (MAC) operations is further demonstrated on a 15 x 15 2T1R crossbar array.

0.29

Making Analog Training Scale: Co-Designing Mapping, Optimizer, and Converters

cs.LG cs.AR ·2026-09-29 ·Zhaoxian Wu, Tayfun Gokmen, Omobayode Fagbohungbe, T. Patrick Xiao, Tianyi Chen
similarity 0.45
Abstract

Analog in-memory computing (AIMC) offers an alternative for model training by executing matrix operations directly where weights are stored. However, scaling AIMC to train modern deep models remains an open challenge due to severe hardware non-idealities, including physical weights with finite dynamic range and write granularity, analog-digital converters with finite resolution, and noisy and asymmetric updates. Guided by the insight that gradient accumulation is sensitive to precision and rounding errors, we adopt a mixed-precision training paradigm: executing forward and backward matrix multiplications in the analog domain while computing weight gradients in the digital domain. To enable scalable training, we present a holistic system-algorithm co-design that co-optimizes weight mapping to ensure well-conditioned physical and logical weight profiles, couples a preconditioned optimizer with threshold-triggered open-loop pulsing to stabilize training trajectories, and aligns converter dynamic ranges to suppress quantization errors. Evaluated via hardware-calibrated architectural simulations calibrated with electrochemical RAM measurements, our framework scales Transformer training up to $123\text{M}$ parameters with validation loss scaling as $L\propto N^{-0.231}$, where $N$ is the parameter count, comparable to $L\propto N^{-0.238}$ for digital training.

0.47

IMC-CLINIC: Coupled Loss-Informed Newton Iterations for Clipping in Analog In-Memory Computing

cs.AI ·2026-09-28 ·Yung-Chin Chen, Chia-Yu Chen, Naveen Verma
similarity 0.45
Abstract

Analog in-memory computing (IMC) offers a promising path toward energy-efficient large language model (LLM) inference by executing matrix multiplications (MatMul) directly within memory arrays in the analog domain. Its efficiency, however, comes with an additional source of error: limited-precision analog-to-digital converters (ADCs) quantize accumulated analog partial sums, introducing output-side error distinct from conventional activation and weight quantization at the MatMul inputs. Clipping can mitigate both operand and ADC quantization errors, but the optimal clipping factors must jointly balance activation rounding and clipping, weight rounding and clipping, and ADC quantization. Existing clipping methods, designed for digital quantization, do not explicitly optimize these coupled sources of IMC error and often rely on costly search-based calibration. We introduce IMC-CLINIC (Coupled Loss-Informed Newton Iterations for Clipping), a clipping calibration framework based on an analytical surrogate for IMC MatMul output error. The surrogate jointly models operand quantization, accumulated clipping-induced bias, and ADC quantization, enabling efficient evaluation of its gradient and approximate curvature from a small calibration set. IMC-CLINIC jointly optimizes activation and weight clipping factors using a safeguarded Newton-type method. Across multiple models and datasets, it improves average zero-shot accuracy by 6.5-11.5 percentage points over the grid search baseline while reducing calibration time by factors of 10.0-12.1. Its analytical surrogate closely tracks empirical IMC output error, and its optimizer is certified within 1% of the global optimum under the loss objective across all projections on two representative models.

0.54

Gain-Dependent Entropy Characterization of a Zener Avalanche Noise TRNG via Dual NIST Standards: Toward Low-Cost Hardware Entropy for ICS Deployments

cs.CR cs.AR ·2026-11-05 ·Rishabh Das
unusual similarity 0.44
Abstract

True random number generators based on Zener avalanche noise offer a low-cost entropy source for industrial control system and IoT edge devices, yet the relationship between amplifier gain, coupling capacitance, and entropy quality remains uncharacterized under current NIST standards. This paper presents a comprehensive entropy assessment of an op-amp-based Zener avalanche noise generator across five gain configurations and two coupling capacitor values, evaluated against the NIST SP 800-22 statistical test suite and the SP~800-90B entropy source assessment using 1.44 billion raw bits per configuration. We identify a three-phase autocorrelation structure, attributed to comparator saturation-recovery dynamics, consistent across all gain settings. A direct-current substitution experiment, replacing the Zener diode with a stable voltage source at the same bias point, reduces switching activity by approximately 97%, confirming that Zener avalanche noise, rather than amplifier self-excitation, is the necessary entropy source. The coupling capacitor is further shown to govern comparator overdrive and entropy quality independent of this source mechanism, with the smaller capacitance improving entropy, throughput, and bias. The combined results identify an optimal gain configuration achieving a perfect statistical test score, NIST-compliant min-entropy, and peak entropy throughput at a bill-of-materials cost under five dollars, offering practical design guidance for low-cost entropy sources in industrial and embedded deployments.

0.28