CS Paper Radar

Vehicle Speed-Aware Jammer-Resilient Receiver for Multi-User MIMO V2X Systems

Hanyoung Park, Yongjae Jang, Ji-Woong Choi

eess.SP ·submitted 2026-11-02 05:26 UTC · v1
published

Abstract

Vehicle-to-everything (V2X) communication plays a crucial role in enabling connected and autonomous driving by supporting the reliable exchange of safety-critical information among vehicles and infrastructure. However, due to the open nature of wireless channels, V2X systems are vulnerable to various physical-layer attacks, among which jamming is one of the most intuitive and severe threats. In this paper, we propose a vehicle speed-aware jammer-resilient reception framework for multi-user multiple-input multiple-output (MIMO) V2X systems. The proposed method exploits the fundamental difference in Doppler characteristics between stationary jammers and moving vehicles. By transforming the received signal into the Doppler domain, the receiver identifies low-Doppler components associated with static interference and suppresses them through Doppler-domain filtering. Notably, the proposed approach does not require prior knowledge of the jammer channel or its spatial direction, making it suitable for practical V2X environments. Simulation results demonstrate that the proposed framework effectively mitigates strong jamming signals and significantly improves the achievable sum-rate compared with conventional receivers.

Comment
Presented at the 17th International Conference on Ubiquitous and Future Networks (ICUFN 2026)
DOI
10.1109/ICUFN69619.2026.11628732

Closest papers

Nearest neighbours by meaning across the whole index.

Weather Data Spoofing Attacks on Rain-Adaptive Millimeter-Wave Frequency Selection in V2X Communication Networks

cs.CR eess.SY ·2026-09-17 ·Rasheed Bello, Idreez Yusuf, Justice Adjei Owusu, Oluwatobiloba Aiyewunmi, Gurcan Comert +5 more
similarity 0.55
Abstract · 6 pages, 4 figures, Submitted to The 14th Annual IEEE International Conference on Wireless for Space and Extreme Environments (WISEE 2026)

Connected vehicles use millimeter-wave (mmWave) sidelinks for the data rates cooperative driving demands, and emerging designs select the carrier band from sensed rainfall. We show that this weather awareness is an attack surface: an adversary who spoofs only the rainfall input dictates the victim's carrier frequency, and through it its communication range, without transmitting on the channel. We evaluate the attack in MilliCar, an ns-3 module that runs the selected band as the real 3GPP NR V2X carrier with per-band propagation, beamforming, and blockage. Forcing the band up to 73 GHz holds an eight-vehicle platoon's reliable range at 38 m while the honest baseline doubles it to 82 m; forcing it down to 5 GHz sustains 97% long-range reception but collapses the transport block to a third and quadruples long-range latency to 12.5 ms. We then implement the defense the mechanism implies. Rain loss grows linearly with distance while path loss grows logarithmically, so a receiver that tests measured SINR against the attenuation its reported weather predicts flags force-up with 98% probability within 1.5 s at a 1% false-alarm rate, and re-selection then restores long-range reception from 60% to 75%. The same test is structurally blind to force-down, because the 5 GHz fallback is nearly rain-immune. An advecting rain cell that swings the local rate from 15 to 81 mm/h leaves every result unchanged. Weather-aware band selection therefore requires an authenticated meteorological input; physical cross-checking covers one half of the threat.

0.39

IMNet: Intercarrier Interference Mitigation Network for Integrated Sensing and Communication in Spectrally Efficient FDM Systems

eess.SP ·2026-08-24 ·Hyeonho Noh
similarity 0.54
Abstract

Spectrally efficient frequency-division multiplexing (SEFDM) is an attractive waveform to improve communication spectral efficiency by compressing the subcarrier spacing, yet its use for integrated sensing and communication (ISAC) poses a fundamental sensing challenge. Specifically, the intentional loss of subcarrier orthogonality generates SEFDM-induced intercarrier interference (S-ICI), which combines with Doppler-induced ICI (D-ICI) from moving targets to blur range--velocity maps and severely degrade sensing accuracy. Building on multi-user multi-input-multi-output (MIMO) SEFDM systems, this paper develops a model-driven ISAC framework that supports spectrally efficient multi-user communication while mitigating both S-ICI and D-ICI in sensing. To this end, an intercarrier interference mitigation network (IMNet) is proposed, which exploits the distinct physical structures of the two interferences. A bank of Doppler correction filters first compensates the velocity-dependent D-ICI over multiple Doppler hypotheses, and an axial-attention network subsequently suppresses the residual D-ICI and the long-range S-ICI to recover reliable sensing signals. To further improve range and velocity estimation accuracy, IMNet with local refinement (IMNet-LR) is proposed, which performs maximum-likelihood refinement with nuisance projection around the IMNet detections to achieve sub-cell precision without an exhaustive global search. Simulation results show that IMNet-LR achieves near-maximum-likelihood range and velocity estimation accuracy with more than three orders of magnitude lower execution time compared to conventional detection methods.

0.26

RadarCom: Unlocking Simultaneous Communication and Sensing on Commodity Automotive mmWave Radars

cs.NI ·2026-10-27 ·Yi Wei, Yue Zhang, Peijun Hou, Qiuyu Liao, Nan Cen
published similarity 0.53
Abstract · Accepted to ACM SenSys 2027. 14 pages

Vehicle-to-vehicle (V2V) communication can improve road safety and traffic efficiency, yet its deployment remains limited by the need for dedicated communication hardware and supporting infrastructure. Meanwhile, production vehicles are already widely equipped with millimeter-wave radars for sensing. To unlock their communication potential, this paper presents RadarCom, a software-defined system that enables direct radar-to-radar communication on unmodified commercial off-the-shelf (COTS) automotive mmWave radars while preserving their native sensing functionality. The key insight is that mutual inter-radar interference, traditionally viewed as harmful, can be repurposed as a communication carrier. Based on this insight, RadarCom introduces slope-mismatch-based discovery, adaptive chirp synchronization, differential coding on range-FFT, and sensing-aware interference suppression to enable simultaneous communication and sensing without hardware modification, waveform redesign, or infrastructure support. We implement RadarCom on TI AWR2243 automotive radars and evaluate it under static, dynamic, and challenging real-world conditions. Results show an average effective data rate of 5.55 kbps with symbol error rates below 1.5%, while maintaining sensing F1 scores of up to 80.5% during concurrent communication. These results demonstrate the feasibility of transforming commodity automotive radars into dual-purpose communication and sensing devices.

0.41

Noncoherent MIMO in the FR3 Upper Mid-Band Using Grassmannian Signaling: Prototype and Experimental Evaluation

eess.SP math.DG ·2026-10-06 ·Álvaro Pendás-Recondo, Enrique Pendás-Recondo, Álvaro F. Vaquero, Marcos R. Pino, Jesús Alberto López-Fernández
similarity 0.52
Abstract · 13 pages, 9 figures

This work presents a prototype implementation of a noncoherent multiple-input multiple-output (MIMO) system based on Grassmannian signalling, where neither the transmitter nor receiver requires channel state information (CSI), operating at a carrier frequency of 15 GHz in the frequency range 3 (FR3) upper mid-band envisioned for 6G. To the best of our knowledge, this is the first prototype implementation of Grassmannian signaling reported in the literature beyond sub-6 GHz bands. We identify the motivation of applying Grassmannian signaling, a form of unitary space-time modulation (USTM), in this band for wireless and mobile applications with low spectral-efficiency requirements but strict reliability and power-efficiency demands. With this idea in mind, we present a system design integrated with orthogonal frequency-division multiplexing (OFDM) that addresses the challenges associated with the higher carrier frequencies of FR3 while providing reliable operation across a broad range of scenarios, including urban and rural environments as well as vehicular communications. We then present the prototype implementation of the proposed design, based on software-defined radio (SDR) devices integrated with radio-frequency (RF) mixers, filters, and power amplifiers to ensure adequate operation in the targeted band. Over-the-air (OTA) experiments based on symbol error rate (SER) measurements under non-line-of-sight (NLoS) and line-of-sight (LoS) scenarios, and across different data rates, show good agreement with software simulations, thereby validating the prototype implementation.

0.28

Collision Avoidance and Collision Detection Strategies to Counteract Large-Scale FMCW Automotive Radar Interference

cs.NI ·2026-11-09 ·Francesco Miccoli, Vittorio Todisco, Fabrizio Cuccoli, Matteo Passeri, Vincent Martinez +1 more
published similarity 0.52
Abstract · 7 pages, 10 figures, 1 table. Accepted at IEEE VTC-Fall 2026, Boston

Automotive radars operating in dense traffic environments may experience significant mutual interference, potentially degrading sensing reliability for advanced driver assistance systems (ADAS). This issue motivates the development of techniques to mitigate interference among multiple radar-equipped vehicles sharing the same spectrum. This paper investigates interference mitigation strategies for uncoordinated radar networks through system-level simulation. Two approaches are considered: frame-by-frame collision avoidance (FbF-CA), which exploits idle intervals to measure the perceived interference and possibly adapt the operating frequency, and frame-by-frame collision detection (FbF-CD), which estimates interference during transmission based on observed chirp collisions. An event-driven radar network simulator is used to model realistic highway traffic and radar interactions. Results show that collision avoidance provides higher robustness when a larger bandwidth is available, while collision detection is more effective under bandwidth-limited conditions. The analysis highlights the trade-off between collision avoidance and collision detection mitigation strategies and provides design insights for scalable automotive radar deployments.

0.35

A Novel BVH-accelerated Dynamic Ray-Tracing Channel Model for Vehicular Communication Systems

eess.SP ·2026-11-05 ·Songjiang Yang, Cheng-Xiang Wang, Yinghua Wang, Chen Wang, Jie Huang +1 more
published similarity 0.51
Abstract

Accurate and efficient channel modeling is critical for evaluating the sixth-generation (6G) networks, while dynamic ray-tracing (DRT) remains bottlenecked by its reliance on channel coherence time. To address this limitation, this paper proposes a novel bounding volume hierarchy-accelerated DRT (BVH-DRT), which introduces a mechanism shift from a time-driven update in DRT to a spatial-driven update. The proposed channel model clusters complex scatterers using the BVH method as pre-processing to establish a geometric coherence distance guided by transceiver kinematics, so that the ray update intervals in BVH-DRT can be autonomously adjusted to reduce the complexity. Furthermore, the non-stationary channel impulse responses are generated to evaluate delay-Doppler (DD) domain waveforms, including orthogonal time frequency space (OTFS) and orthogonal delay-Doppler division multiplexing (ODDM). Validations in vehicle-to-vehicle (V2V) scenarios demonstrate that BVH-DRT achieves spatial-temporal consistency with measurements and commercial software while significantly enhancing computational efficiency. Additionally, bit error rate (BER) evaluation highlights the severe impact of high-dynamic channels on waveform performance. The proposed framework is important for designing reliable communications and robust sensing in 6G networks.

0.41

Jamming Detection in 5G/6G Networks: From O-RAN Concept to OCUDU Deployment

cs.NI ·2026-09-16 ·Marcin Hoffmann, Lukasz Kulacz, Osama Baldo, Marcin Pakula, Balaji Raghothaman
publishedcode/data similarity 0.51
Abstract · Accepted for presentation and publication in proceedings of IEEE MILCOM 2026 conference

RF jamming poses a severe threat to 5G/6G networks, increasing packet latency being especially disruption to mission-critical URLLC services. This paper introduces a proactive Jamming Detection xApp (JD-xApp) for the Open RAN architecture that detects attacks by monitoring the moving-average Block Error Rate (BLER) via the E2 interface. Upon detection, the algorithm overrides standard link adaptation, enforcing a robust upper ceiling on the Modulation and Coding Scheme (MCS) to stabilize latency. To counter O-RAN platform adoption challenges, we transition the framework to an open-source Centralized Unit/Distributed Unit implementation (OCUDU). Evaluated with high-end Keysight lab equipment including the UXM 5G Wireless Test Platform and the PROPSIM F64 channel emulator, the JD-xApp reduces the expected number of packet retransmission attempts by about 67.3%. Finally, the system's feasibility is validated via over-the-air deployment using the POWDER lab infrastructure.

0.62

Joint Channel Estimation, Detection, and Resource Allocation for OTFS-RSMA

eess.SP ·2026-09-21 ·Chaedam Son, Si-Hyeon Lee
similarity 0.51
Abstract · This work has been submitted to the IEEE for possible publication

Orthogonal time frequency space (OTFS) modulation is well suited for high-mobility communications, but channel estimation and efficient multi-user transmission remain challenging. In this paper, we develop an OTFS-rate splitting multiple access (RSMA) framework that jointly considers pilot transmission, channel estimation, message detection, and resource allocation under imperfect channel state information (CSI). We consider guard-based and superimposed transmission for the common and private messages to account for the tradeoff between channel-estimation reliability and spectral efficiency (SE). We derive a linear minimum mean square error (LMMSE) channel estimator, error-aware message-passing detectors, and tractable surrogate rate expressions that account for channel-estimation errors. Based on these expressions, we formulate a joint resource-allocation problem and develop an SCA-based two-dimensional search algorithm together with a low-complexity alternative that exploits the analytical structure of the resource allocation. Numerical results demonstrate reliable channel-estimation and BER performance and show that configurations with guard-based common-message transmission achieve favorable sum-SE performance, while the preferred private-message structure depends on the operating regime. The low-complexity algorithm achieves near-SCA performance with substantially reduced computation time, and OTFS-RSMA remains competitive with OTFS-NOMA while requiring only a single SIC stage.

0.16