CS Paper Radar

Kinematic analysis of a double-closed-loop four-bar chain-based leg for a multimodal quadruped-pentarotor robot

Prashant Raturi, Santhakumar Mohan

cs.RO eess.SY ·submitted 2026-11-05 05:28 UTC · v1

Abstract

This paper presents the kinematic modeling and singularity analysis of a three-degree-of-freedom, double four-bar closed-loop quadruped leg mechanism. This leg is essential for transitioning between the two operational modes; therefore, it is examined in both joint and task spaces, leading to the development of its Jacobian matrix, which is vital for designing the gaits required for terrestrial mode and mid-air aerial reconfiguration (for aerial mode). Various gaits are devised for the system's motion in the MATLAB simulation, and their practical implementation on the single-leg test rig is demonstrated.

Comment
Journal paper submitted to Robotica with ID:ROB-2026-0373

Closest papers

Nearest neighbours by meaning across the whole index.

Design and Control of a Multimodal Legged-Aerial Robot Through Separate Control Contraction Metrics

cs.RO eess.SY ·2026-10-19 ·Kaushik Venkatesh Krishnamurthy, Eric Sihite, Alireza Ramezani, Morteza Gharib
published similarity 0.61
Abstract · Presented at 2026 IEEE International Conference on Intelligent Robots and Systems, Pittsburgh PA

The integration of dynamic legged locomotion and aerial mobility offers versatility that is deterred by challenges in payload distribution, actuation, and the contrasting requirements of both domains. In this paper, we present the design and operation of a multimodal quadrupedal aerial-legged robot. The presence of legged aerial systems also allows for thruster-assisted legged locomotion, which we make possible with a unified control framework using Control Contraction Metrics (CCM). We search for separate domain-specific contraction metrics for walking and flight independently offline and unify them using an online energy-based Control Lyapunov Function Quadratic Program (CLF QP). This enables optimal, cross-domain control allocation, which we show using simulations. We also show experimental results that validate the mechanical viability of our hardware and the paradigm of thruster-assisted trotting. The stability of said experiments motivates the deployment of the control framework for multimodal operations.

0.20

ClimbLab: MATLAB Simulation Platform for Legged Climbing Robotics

cs.RO ·2026-10-07 ·Kentaro Uno, Warley F. R. Ribeiro, Yusuke Koizumi, Keigo Haji, Koki Kurihara +2 more
publishedhighly cited similarity 0.60
Abstract · Author's version of a manuscript in the proceedings of CLAWAR 2021. The final published version is available at: https://doi.org/10.1007/978…

This paper presents an open-sourced MATLAB simulation and analysis platform dedicated to legged climbing robots. This simulator enables the design of any limbed robotic system as an articulated multi-body with a floating base and simulates it walking and climbing in an arbitrary environment. The main variable environmental parameters are inclination, gravity, and ground stiffness, and any point cloud can be installed as the terrain map. Furthermore, the simulator employs a rigid body dynamics engine. This paper first describes the simulator structure, and the computational flow and next presents the representative simulation examples where quadrupedal robots assumed gripping on the wall or climbing on the steep slope.

0.67

Cooperative Aerial Transportation of a Payload with a Sliding Cable Attachment

cs.RO cs.MA ·2026-10-09 ·Sebastian Tilaguy Lezama, Diego S D'Antonio
similarity 0.55
Abstract

This paper presents a dual-quadrotor hook- suspended transport system for cooperative aerial manipulation of a payload that is not rigidly attached to a fixed point along the cable. Two quadrotors are connected by a single inextensible cable that passes through a frictionless hook mounted on the payload, allowing the cable to slide between its two segments. This introduces a cable-distribution variable that couples the quadrotor motion, cable geometry, and payload dynamics. A feasible reference-generation framework is formulated using the desired payload pose, cable distribution, and system shape while satisfying the cable-length constraint and elliptical workspace. The quadrotors track the geometrically generated trajectories while maintaining positive cable tension and respecting actuator limits. The payload pose is estimated from the system geometry, and its measured position is used only to validate the desired trajectory. The approach is evaluated through experimental demonstrations.

0.33

Breaking speed scaling in quadrupedal robots via Huygens' coupled-pendulum dynamics

cs.RO ·2026-09-09 ·Yucheng Tao, Yongbin Jin, Shaowen Cheng, Xianwei Liu, Yanyan Yuan +6 more
similarity 0.55
Abstract

Achieving biological-level running speeds has largely been pursued through advances in control algorithms, which improve the utilization of existing hardware. However, the ultimate speed limits remain governed by the underlying force and torque requirements of rapid locomotion, which are typically addressed through increased actuator capacity. Inspired by Huygens' coupled pendulums, we demonstrate that superior locomotion can emerge from principled exploitation of intrinsic dynamics rather than brute-force hardware scaling. Inter-limb inertial coupling redistributes energy across the gait cycle and reduces peak joint torque required for rapid periodic motion, thereby expanding the achievable speed without proportional increases in actuator capability. Incorporating hardware parameters as additional design variables further extends this analysis into a co-optimization framework, enabling the systematic utilization of inertial coupling in robot design. Guided by this framework, a quadruped robot achieves a running speed of 10.74 m/s (Froude number 21.4) and completes a 100-meter sprint in 12.2 seconds, representing the first legged robot to surpass 10 m/s. These results establish inertial coupling as an underlying mechanism governing high-speed legged locomotion and highlight its role in reducing force requirements, offering new insights into the design of agile robotic systems.

0.24

Vision-Guided Morphing Quadcopter for Multi-Geometry Payload Transport through Narrow Passages

cs.RO ·2026-08-22 ·Aashish Sahu, Shriram Hari, R. Prasanth Kumar
similarity 0.55
Abstract

Aerial payload transport using multirotor unmanned aerial vehicles is challenging because payload geometry, contact interaction, grasp stability, flight control, and narrow-passage traversal are strongly coupled during pickup and transport. Object-specific grippers often cannot adapt their footprint or grasp geometry when the payload shape or passage width changes. This paper presents a vision-guided morphing quadcopter for multi-geometry payload transport through narrow passages. The proposed platform uses four hybrid arm-leg structures that function as both landing supports and grasping members. A centrally placed actuator drives a tendon-based morphing mechanism, enabling all four arms to synchronously retract or expand for object grasping, footprint reduction, and post-transport release. Onboard vision estimates the payload geometry and passage width, while endpoint force feedback is used to confirm grasp contact during payload engagement. A phase-wise mission planner, PID-based flight stabilization, and morphology-adaptive grasp controller are implemented in a MuJoCo simulation environment. The framework is evaluated using box, cylindrical, and spherical payloads, representing flat-faced, rolling-curved, and fully curved contact conditions. Across the three cases, the simulated system completes the pickup-transport-release sequence with a maximum RMS position error of 0.31 m, a final drop-zone error below 0.18 m, a compact grasp footprint of 0.09-0.21 m2, and a footprint reduction of 75.0-89.7 percent. The results demonstrate that a single-actuator morphing quadcopter can adapt its grasp footprint for the transport of payloads with different geometries while reducing its overall footprint for narrow-passage traversal.

0.20

Spiderbot: An Open-Source Energy-Efficient Hexapod with Passive Gravity Compensation

cs.RO eess.SY ·2026-09-22 ·Ritwik Sharma, Vimarsh Shah, Saransh Agrawal
code/data similarity 0.54
Abstract · 8 pages

Hexapod robots can achieve static stability with fewer actuated joints than bipeds or quadrupeds, yet many platforms still use 3-DOF legs, increasing weight and continuous torque requirement with limited gain in locomotion capability on flat, inclined and moderately rough terrains. We release Spiderbot, an open-source hexapod that uses a 4-bar linkage with a passive spring to mechanically support body weight, with a 2-DOF per-leg design that substantially reduces energy consumption. This mechanism substantially offloads gravitational torque during standing stance consuming only 1.5W (reduction of over 90\% over the unsprung version and up to 96\% over other similar hexapods). The passive spring compensation extends to payloads of up to 3.25kg with no additional torque requirements. The platform enables long-duration deployments on a modest battery budget and costs under \$400, making it suitable for large-scale multi-agent experiments. We validate the locomotion capabilities of the platform with an RL policy trained in mjlab, including successful sim-to-real transfer, despite the complexity of the mechanism. The platform is evaluated on flat and rough terrains, slope up to $15^\circ$ and step obstacles. We release all the CAD files, assembling instructions, and full training and deployment code along with the model checkpoints at https://erc-bpgc.github.io/SpiderBot/.

0.27

Gait-Dependent Effects on Quadruped Locomotion for Load-Carrying using Passive Mechanism

cs.RO ·2026-09-10 ·Giovanni B. Dessy, Claudio Semini, Victor Barasuol
similarity 0.54
Abstract

Passive mechanical interfaces offer a lightweight alternative to actuated manipulators for quadruped payload carrying, but their impedance directly couples the payload dynamics with the locomotion pattern. This paper analyzes how passive-arm stiffness-damping selection affects payload-carrying locomotion under different gait and payload conditions. We compare damped and underdamped passive-arm impedance configurations in simulation during flat-ground locomotion. For crawl gaits, where the support polygon remains well defined, the results show that underdamped impedance increases passive-joint oscillations and can reduce the ZMP margin with respect to the support polygon. Trot is retained as a dynamic excitation case for the passive arm, but it is not used for direct ZMP-margin stability comparison. The results are summarized in gait-payload-stiffness-damping maps, where ZMP-margin reduction is evaluated for crawl gaits and trot is retained only as a passive-arm excitation case.

0.44

Flexible-body Modeling, Kinematic Identification, and Assembly Accuracy of Overconstrained Spatial Linkages

cs.RO math.AG ·2026-09-15 ·Daniel Huczala, Michael Pieber, Johannes Gerstmayr, Andreas Mair, Frederik Schulte +4 more
similarity 0.54
Abstract

Overconstrained rational single-loop linkages are efficient, compact, and low-cost custom mechanisms, yet their deployment in industrial settings is limited. In simulations, rigid body formulations fail due to redundant constraints. This study presents a flexible multibody modeling framework based on the floating frame of reference formulation, and delivers an overall accuracy analysis of assembled linkages prototypes. The approach is validated against 3D-printed PLA prototypes of a Bennett four-bar mechanism, including variants with intentional joint-axis misalignment, which theoretically, from the rigid body point of view, cannot be assembled. A supplementary contribution is delivered in the form of a kinematic parameter identification methodology suited for this type of mechanism with ill-conditioned Jacobian. The experimental and simulation results are compared and reveal that these overconstrained mechanisms exhibit a self-assembling tendency -- structural compliance drives the assembly toward the ideal geometric configuration, distributing constraint stress throughout the structure. Additional qualitative demonstrations using cardboard tubes and bamboo sticks as link building blocks confirm that functional mechanisms can be realized from low-cost, unconventional materials with limited manufacturing accuracy. The proposed modeling pipeline is fully algorithmic and enables design optimization in the future.

0.18