CS Paper Radar

A Hybrid UKF with Explicit Drivetrain Modeling for Low-Velocity State Estimation of Electric Vehicles

Hendrik Schäfke, Daniel O. M. Weber, Thomas Seel, Askar Vagapov, Jannes Iatropoulos, Christoph Schweers, Ahmed Trabelsi, Roman Henze, Simon F. G. Ehlers

eess.SY ·submitted 2026-11-05 14:49 UTC · v1

Abstract

Longitudinal velocity is a core input for vehicle control, driver-assistance, and automated driving functions. Production wheel-speed sensors deliver only a few pulses per revolution, so they lose resolution below 1 km/h, the regime in which automated parking and traffic-jam assistance operate. The motor speed from the electric machine's resolver stays finely resolved down to standstill but reaches the wheels only through a compliant drivetrain. We therefore estimate the longitudinal velocity with an unscented Kalman filter (UKF) on a double-track model adapted to low velocities and incorporate the motor speed along two routes, one purely physical and one hybrid. The first augments the model with an explicit torsional spring-damper drivetrain, making the motor speed a state of the estimator. The second feeds the output of a neural network-based virtual wheel-speed sensor into the UKF as a pseudo-measurement. Both routes are compared against two baselines, a wheel-speed-only configuration and one that adds the motor-speed sensor but treats the driveline as rigid. Because the model is numerically stiff near standstill, the comparison rests on a systematic study of explicit and semi-implicit discretization schemes. All four configurations are evaluated against an inertial reference in real-world test drives with two distinct series-production electric vehicles, anonymized as Vehicle A and Vehicle B for confidentiality. Below 1 km/h, both proposed estimators lower the velocity root-mean-square error by at least 54% and 45% against both baselines on Vehicle A. Carried over zero-shot to Vehicle B without re-tuning on target-vehicle data, they lower it by at least 41% and 51%. Both estimators therefore carry across vehicles without a new identification campaign.

Comment
14 pages, 11 figures, 3 tables. Submitted to IEEE Transactions on Intelligent Vehicles

Closest papers

Nearest neighbours by meaning across the whole index.

Physics-Informed Koopman Learning for Data-Efficient System Identification of Automated Vehicle Dynamics

eess.SY ·2026-10-17 ·Hangyu Li, Yiming Meng, Zhaohui Liang, Yunqing Xiao, Yuxuan Chen +5 more
code/data similarity 0.54
Abstract · 13 pages, 9 figures. The CATS-CF dataset and code are available at https://github.com/CATS-Lab/PI-Koopman

Understanding how a particular automated vehicle reacts to nearby traffic can improve motion prediction, control development, traffic simulation, and safety evaluation. However, commercial automated driving systems are proprietary, and single encounters may provide only a few seconds of noisy data. Standard physical models are interpretable but inflexible, whereas neural models are often data-hungry. We propose a physics-informed Koopman framework that combines a calibrated car-following law with a correction learned from the observations. A weak-form estimator learns this correction from velocity measurements integrated over time, avoiding noise-sensitive numerical differentiation. The resulting continuous-time model predicts the follower's response and provides interpretable measures of driving behavior. Experiments on OpenACC and CATS-CF evaluate 5-, 7-, and 11-second histories. Averaged over these histories, the constant-time-headway branch reduces speed prediction error by 16.0% and 15.4% on OpenACC and CATS-CF, respectively, relative to the best neural baselines. The PI-Koopman branches achieve the lowest mean speed and gap errors among the physical and neural comparators. Weak-form estimation reduces acceleration-field reconstruction error by 74.5% in noisy known-law simulations and noise-induced field perturbation by 91.6% in paired real-vehicle measurements. The same PI-Koopman system identification supports following-mode recognition with an approximately eleven-fold difference in median residual variance between human drivers and automated vehicles, and a single residual threshold achieves 85.4% balanced accuracy. The branch informed by the intelligent driver model takes a median 17 to 26 ms for identification and forecasting on the tested central processing units, supporting frequent target adaptation.

0.34

Energy-Aware Path Following: Comparative Analysis of Reinforcement Learning and NMPC for Electric Vehicles

cs.RO cs.LGeess.SY ·2026-10-06 ·Mohamed Sabaa, Mostafa Emam
similarity 0.53
Abstract · 20 pages, 12 figures, currently submitted for review at the journal (Robotics and Autonomous Systems) https://www.sciencedirect.com/journal/…

Path-following control strategies typically follow the bi-objective optimization dilemma: minimizing deviations from a reference path while maintaining smooth speed profiles. The latter objective is especially relevant for Electric Vehicles (EVs), since their limited driving range can be extended by recovering energy through regenerative braking, a feature that has not yet been sufficiently studied in the literature. In this work, we perform a comparative analysis of four controllers under one common Frenet frame-based kinematic vehicle model, utilizing a validated energy model (VT-CPEM) with explicit regenerative braking. Herein, we implement the following controllers: Nonlinear Model Predictive Control (NMPC), Proximal Policy Optimization (PPO), gain-scheduled Ackermann state-feedback baseline (PID-SF), and a Stanley geometric baseline. To satisfy real-time requirements, we implement the NMPC using JIT-compiled CasADi. Moreover, we train the PPO using traditional straight and S-curve tracks, after which we successfully transfer the unmodified policy to unseen tracks, including: an ISO 3888-1 lane-change, a chicane, randomly-generated parameterized-splines, and a $\pm3^\circ$ graded road. In addition, the policy transfers to a dynamic single-track vehicle model with linear tires, zero-shot with an acceptable initial performance, which was optimized after brief fine-tuning. Thereby, we demonstrate that our PPO is readily transferable to more comprehensive vehicle models. We conclude with a performance analysis of developed controllers and discuss ideas for future work.

0.25

Scalable Identification of Physics-Based and Neural Dynamics from Partial Measurements

eess.SY cs.LGmath.OC ·2026-10-12 ·Yibo Zhou, Johannes Köhler
code/data similarity 0.53
Abstract · The code is available at https://github.com/YiboFrankZhou/Scalable-PEM-MHE

We present a scalable method for identifying nonlinear dynamics from partial measurements, supporting physics-based, neural-network, and gray-box models. We use the Prediction Error Method (PEM) coupled with state estimation performed by a Moving Horizon Estimation (MHE) scheme, which can account directly for general nonlinear dynamics. This results in a bi-level optimization problem that scales poorly with increasing model parameters. To improve computational efficiency, we derive a reformulation that avoids explicit parameter-wide sensitivity matrices and exploits the temporal structure of the underlying optimization problem. Numerical comparisons show up to a $215\times$ speedup in hypergradient evaluation. Racing-vehicle simulations demonstrate accurate prediction and physical-parameter recovery in tire-force identification. Real-world data show that the gray-box model improves prediction accuracy with a neural residual while retaining physical interpretability.

0.47

Identification of the Steering and Speed Systems of a Four-Wheel-Steering Tractor for Optimal Control

eess.SY ·2026-09-04 ·Riikka Soitinaho, Timo Oksanen
similarity 0.52
Abstract

Model-based control design requires sufficiently accurate model of the system-to-be-controlled. This paper addresses the system identification of steering and speed control of a four-wheel-steering agricultural tractor for the purpose of developing path tracking control. To this end, we investigate the steering and speed control systems of the tractor. These are complex systems with digital, mechatronic, and hydraulic components challenging to model based on first principles. We take a data-driven approach to estimating the system models. The resulting model combines the kinematic model of the vehicle, actuators modelled as first-order systems, and estimated values for time constants and transport delays.

0.32

Integrated Longitudinal and Lateral Control for High-Speed Platooning of Articulated Vehicles

cs.RO eess.SY ·2026-10-21 ·Aashish Shaju, Steve Southward, Mehdi Ahmadian
published similarity 0.51
Abstract · Original manuscript of an article published in Vehicle System Dynamics on September 20, 2026. Published version: https://doi.org/10.1080/004…

This paper presents an integrated control framework for high-speed platooning of articulated vehicles, combining advanced longitudinal and lateral control strategies to address the challenges of safe and efficient autonomous driving. A novel proof of string stability for the proposed longitudinal control algorithm, based on a PID framework, ensures robust inter-vehicle distance regulation even under dynamic operating conditions. Additionally, an arc-length-based longitudinal error formulation enhances the applicability of the control system for curved roads, making it realistic for diverse driving scenarios. For lateral control, significant improvements to the clothoid-based path tracking algorithm are introduced to mitigate oscillations and enhance stability at high speeds. These enhancements include a tangential criterion for oscillation reduction, trajectory segment classification for adaptive lookahead distance tuning, a dual-adaptive mechanism for regulating the rate of lookahead distance adjustments based on both cross-track error (CTE) and anticipated road curvature, and extensions for articulated vehicle dynamics. The proposed integrated control framework is validated through simulations, demonstrating its effectiveness in maintaining stability, minimizing tracking errors, and ensuring robust performance in high-speed and challenging platooning scenarios.

0.41

IMU-Centric Moving Horizon Estimation for Lateral Dynamics Estimation Across Vehicles and Grip Conditions

eess.SY cs.RO ·2026-09-09 ·Seuffo Akouan ha Ngoune, Alessandro Toschi, Paolo Burgio, Marko Bertogna
publishedcode/data similarity 0.51
Abstract · Accepted at the 29th IEEE International Conference on Intelligent Transportation Systems (ITSC 2026). 8 pages, 6 figures

Accurate estimation of lateral vehicle dynamics near the adhesion limit is important for stability control and high-performance driving, but lateral velocity is rarely measured directly because sensors such as optical sensors are costly. This paper presents an inertial measurement unit (IMU)-centric Moving Horizon Estimation framework that reconstructs lateral velocity using standard onboard signals, without relying on exteroceptive odometry or detailed tire-parameter tuning. Experimental validation on human-driven sports cars and an autonomous open-wheel race car across tracks, maneuvers, and conditions demonstrates accurate and robust lateral velocity and lateral acceleration estimates. The proposed framework is available at https://github.com/Aseuffo/IMU-Centric-MHE

0.48

Cross-Vehicle Transferability of Lateral Velocity Estimation on Production Vehicles through Input Selection and Data Augmentation

eess.SY cs.LG ·2026-11-18 ·Hendrik Schäfke, Simon F. G. Ehlers, Thomas Seel, Askar Vagapov, Christoph Schweers +2 more
similarity 0.51
Abstract · 14 pages, 7 figures, 6 tables. Submitted to Control Engineering Practice

Lateral velocity is safety-critical for vehicle-dynamics control but cannot be measured with production sensors. Model-based estimators such as Kalman filters are established, whereas data-driven estimators are more accurate within the training regime but suspected to lose accuracy beyond it. Their transfer to a structurally different vehicle has rarely been tested. We record real-world test drives of three series-production vehicles, train a neural-network estimator on production CAN signals of a compact car, and evaluate it zero-shot on an SUV and a van against a GNSS-aided inertial reference. On the unseen vehicles, the network's error exceeds that on the training vehicle by an order of magnitude, a gap not quantified on production vehicles before. A systematic comparison of input sets from ten production CAN signals identifies a five-signal set that transfers most robustly. To narrow this gap, we introduce three physically motivated augmentations of training data. Two improve generalization, namely exploiting the vehicle's left-right symmetry and emulating accelerometer bias. Combined, they reduce the error on the validation maneuvers of the SUV and van by 13% and 15%. Contrary to common expectation, on the SUV the data-driven estimator trained with both augmentations matches a model-based estimator tuned on the same training data.

0.34

Mapping Tire-Road Friction Coefficients Along Driven Trajectories

cs.RO ·2026-10-09 ·Risto Ojala
benchmarkcode/data similarity 0.51
Abstract

Information of the tire-road friction coefficient is critical for intelligent vehicle systems, as friction establishes the limits at which the vehicle can be manoeuvred without loss of control. While there is extensive literature on online friction estimation, no previous studies have explored post-processing and mapping friction coefficients along a driven trajectory based on recorded sensor data. Mapped friction information could be shared by connected vehicles, enabling proactive measures in low-friction areas. This paper presents an offline post-processing method, FrictionMap, for mapping friction coefficients from recorded driving data. The method operates on commonly available on-board vehicle sensor information, and requires only a basic vehicle parameter set and a slip threshold as prior knowledge. FrictionMap runs an extended Kalman filter combined with a Rauch-Tung-Striebel smoother to estimate vehicle dynamics. Data points where the friction limit is observable are identified by filtering points based on tire slip. A Gaussian process is fitted to these points to acquire a continuous estimate of the friction coefficient along the trajectory. FrictionMap is validated via a simulation study, and shown to outperform commonly used online friction estimation techniques. The code implementation and the simulation benchmark are released as open-source after paper acceptance to enable further research.

0.34