CS Paper Radar

PreForceVision: Physics-Guided Optical Estimation of Bolt Preload from Bolt-Head Deformation

Nehal Afifi, Klaus Rappenecker, Florian Peinhardt, Gerhard Kachel, Alfred Isele, Sven Matthiesen

cs.AI ·submitted 2026-11-06 14:39 UTC · v1
publishedunusual

Abstract

Bolt preload is a decisive functional quantity in bolted joints because it determines whether external loads are transmitted primarily through frictional clamping or directly through the bolt. Existing preload measurement techniques, including strain-gauge bolts, force washers, ultrasonic methods, and bolt-length measurements, are effective in certain applications but require additional hardware, coupling, calibration, or joint modifications. This limits their scalability for large numbers of standard fasteners and motivates a non-contact optical approach. This paper proposes PreForceVision, a physics-guided optical framework for estimating bolt preload from preload-induced surface deformation of the bolt-head front face. The method treats preload estimation as an inverse deformation-to-force problem, where deformation of the optically accessible bolt-head surface is extracted from reference-loaded image pairs and related to the internal preload state. Preliminary results for an M16 strength class 8.8 bolt show an approximately \SI{12}{\micro\meter} simulated head-face depression at \SI{90}{\kilo\newton}, strain-gauge measurements of comparable magnitude, and an optical 3D measured central depression of approximately \SIrange{10}{20}{\micro\meter}. The contribution is a physics-guided optical methodology combining controlled image-pair acquisition, DIC- or optical-flow-based deformation extraction, multimodal validation, and uncertainty-aware regression for rough preload estimation under controlled conditions.

Comment
9 pages, Proceedings of the ASME 2026 International Mechanical Engineering Congress and Exposition (IMECE 2026), November 8-12, 2026, Vancouver, Canada. Accepted and under publication

Closest papers

Nearest neighbours by meaning across the whole index.

Force-Based Offset Estimation for Keyed Peg-in-Hole Assembly Using Local Gaussian Process Regression

cs.RO ·2026-08-18 ·Chandra Yuvesh Aubeeluck, Abilash Philip Madavath, Augustin Raju, Nicolas Pyschny, Felix Hackelöer +1 more
publishedhot direction similarity 0.50
Abstract · 6 pages, 11 figures. Accepted and presented at the 2026 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2026), …

Key-keyway assembly tasks impose strict geometric constraints and are highly sensitive to grasp pose deviations in uncertain environments. This work presents a force-based offset estimation method for keyed peg-in-hole assembly, embedded within a perception-validation-insertion pipeline. Residual misalignment is estimated directly from wrist force/torque measurements using a local KNN-Gaussian Process hybrid regressor. The framework distinguishes between two contact regimes, hard collision and guided chamfer insertion, and routes inference to a dedicated model for each. Regime classification is achieved via a contact-window duration threshold. KNN combined with a deterministic search using the results of a post-grasp monocular visual validation contributes to an increased accuracy of the regressor model. This approach achieves accurate radial offset estimation in chamfered peg insertion, during a keypoint detection-based pick and place application. Experiments using the integrated force/torque sensor of a collaborative robot arm showed an increase in insertion success rate from 67% to 87% after the pipeline was applied.

0.46

Full-field laser-Doppler-vibrometry FRF dataset for a four-bolt aluminum plate under bolt-torque variation

eess.SP eess.SY ·2026-09-04 ·Berkay Kullukcu, Dina Hannebauer
publishedunusual similarity 0.46
Abstract

The dataset described in this article was constructed using the results of laser Doppler vibrometry experiments conducted on an aluminum plate having four bolts. The database captures the variation in the vibration characteristics of the plate as a function of changes in tightening torque on the bolts. In total, there were 18 different states for the tightening torque, ranging from a situation where all bolts are tightened to all bolts being loose. Other possible combinations include states with varying torque applied to just one bolt, and those involving multiple loose bolts. Data consist of 1,836 files exported from Polytec PSV-500, categorized as amplitude and phase data, for frequency ranges spanning 1 Hz to 51,200 Hz at intervals of 1 Hz. The identified zones were analyzed at 51 scan points for all states of torque. Supporting documents included specifications of the test plate, scan point and torque state information, selected resonance peaks tables, measured frequencies for seven resonance groups, correlation values for all FRF, visualizations, and code scripts.

0.67

Screening bolt loosening in a four-bolt plate with global FRF correlation and local FRAC maps from full-field laser Doppler vibrometry

eess.SP physics.optics ·2026-09-04 ·Berkay Kullukcu, Robin Pianowski, Mehmet Sait Özer, Ercan Altinsoy, Dina Hannebauer
unusual similarity 0.46
Abstract

Full-field laser Doppler vibrometry (LDV) can reveal how bolt torque loss redistributes a frequency response function (FRF) over an entire structure rather than only at a few sensor positions. This work presents a screening procedure for a four-bolt aluminum plate using pointwise amplitude and phase exports of scanned H1 FRFs. Candidate resonances were selected from the all-tight spatial RMS spectrum and tracked in four single-bolt 0 Nm cases. Seven baseline responses remained trackable within prescribed group-specific search windows and were retained as experimental resonance groups RG1-RG7; a dimensionless plate-frequency coefficient was reported alongside each measured frequency. Global changes were quantified using amplitude-only and complex, phase-retaining modal-assurance dissimilarities, and local changes were evaluated using matched-window FRAC-deficit maps and a normalized hotspot-area fraction. The retained groups separate into low-, intermediate-, and high-distortion responses, while the local maps distinguish compact joint-centered changes from distributed FRF redistribution. The workflow therefore links global FRF distortion with spatially resolved interpretation without relying on a trained classifier or specimen-specific node labels.

0.58

Multi-Modal Non-Prehensile Estimation of Physical Parameters via Press-and-Pull Tipping

cs.RO ·2026-09-27 ·Steven M. Hyland, Jing Xiao, Cagdas D. Onal
similarity 0.45
Abstract

Recovering physical properties of unknown objects through non-prehensile interaction is challenging because no single manipulation primitive reveals all relevant parameters. Planar pushing couples mass and friction, while conventional tipping cannot recover friction and may fail entirely when low-friction or curved-base objects slide or rotate instead of tipping. We introduce a multi-modal estimation framework that combines a sliding interaction with a press-and-pull tipping primitive to recover object mass, center of mass height, and surface friction. The press-and-pull interaction increases the object-table sliding threshold and stabilizes the pivot, enabling controlled tipping without any prior geometric object model. Wrist force/torque sensing, RGB-D perception, and robot proprioception are fused to estimate the physical parameters from the two complementary interaction modes. Experiments on an ABB IRB120 across four objects with varied geometry, mass, center of mass, and friction achieve low relative error, while successfully operating on curved-base objects that fail under conventional forward tipping. The results demonstrate that complementary non-prehensile interactions can recover a compact set of physical parameters without grasping, a prior object model, or learned interaction dynamics.

0.23

MS-RFD: Multi-Signal Release Frame Detection in Hammer Throw from Reconstructed 3D Trajectories

cs.CV ·2026-09-16 ·Ahmed Endris Hasen, Nikolaos Passalis, Tomi Vanttinen, Jenni Raitoharju
similarity 0.44
Abstract · 6 pages, 4 figures

Recent advances in artificial intelligence and computer vision are reshaping sports performance analysis by enabling automated detection, tracking, and performance analysis. In hammer throw, performance is strongly determined by the kinematic conditions at release, particularly release speed, release angle, and release height. However, identifying the release instant from video typically requires manual frame-by-frame inspection, which is subjective and cumbersome in real-world training scenarios. In this paper, we present a fully automatic multi-signal release frame detection (MS-RFD) method for hammer throw using reconstructed 3D hammer trajectories. The proposed method integrates four complementary kinematic signals: speed dynamics, angular velocity transition, radial distance relative to the rotation center, and post-release trajectory linearity. These signals are fused to score and verify candidate release frames. MS-RFD is evaluated through the throwing-distance estimation error obtained from the release parameters estimated at the detected frame. An ablation study analyzes the contribution of each signal and compares alternative candidate selection strategies. The results show that speed dynamics and radial expansion provide the strongest signals for release frame detection, while angular velocity and post-release linearity provide smaller refinements.

0.31

LUMO: Designing Luminous Contact Morphology for Repeatable Whole-Finger Contact Observation

cs.RO ·2026-09-16 ·Dong Ho Kang, Youngsu Ko, Luis Sentis
similarity 0.44
Abstract

A low-impedance robot finger reports through joint torque how strongly it is loaded, but the same torque can arise from a small force near the fingertip or a large force near the joint. Resolving the force therefore requires knowing where along the finger contact occurred. LUMO makes that location externally observable. Embedded LEDs illuminate a compliant silicone pad, and contact deforms the pad so that light emerging from the finger's side changes in a pattern set by where the load acts. Because the same structure also carries the contact load, we optimize its cross-section, including the pad profile, rigid carrier, and lateral void, for two behaviors at once. Mechanically, the pad conforms under low preload while the carrier increasingly restricts further deformation as load rises. Optically, different contact locations produce separated responses on the finger's side. The search uses rigid--soft contact simulation, ray tracing, and multi-objective Bayesian optimization. Across two silicones, six contact locations, and 10- and 30-mm spherical indenters, the optimized morphologies improve neighboring-location separation relative to variation from re-establishing contact by \(15\)--\(59\%\). Estimating contact location from the optical response using the known LED spacing and combining it with joint torque gives \(1.44~\mathrm{N}\) normal-force MAE over 931 samples. In a two-finger hand, localized side responses appear on several links simultaneously during grasps.

0.26

Exploring Proximity and Tactile Sensing for Robotic Manipulation

cs.RO ·2026-11-02 ·Eric T. Chang, Bianca Aumann, Zhanpeng He, Mohamed Elnoor, Thomas Liang +5 more
similarity 0.44
Abstract

Pre-touch sensing, or sensing information about an object before contact, is an attractive modality for robot hands as it can allow a robot to anticipate and respond to a contact before it happens. In this work, we introduce ToFTouch, a multimodal tactile sensor combining three multizone (4$\times$4 resolution) time-of-flight sensors with an optics-based pressure sensing array. We mount this sensor on a parallel jaw gripper and demonstrate its utility on three distinct tasks: (i) pre-grasp adjustment, (ii) item extraction from clutter, and (iii) item insertion into tight spaces. For pre-grasp adjustment, ToF feedback reduced cycle time by 7.4$\%$ by enabling anticipatory gripper closure during approach. For extraction, ToF sensing enabled successful retrieval across all tested depth offsets ($\pm$2 cm) deviating from the nominal pick point, including conditions where baseline approaches failed, with standard deviations below 0.4 cm. For insertion into dense clutter, we explore the proximity and tactile information provided from ToFTouch during an insertion trajectory. The results demonstrate the utility of multizone ToF sensing in a manipulation environment.

0.16

Stiffness coefficients in granular micromechanics determined with three-point bending experiments and digital image correlation for a bimodulus material

cs.CE ·2026-10-27 ·Mohammad Mahdi Nayeban, Bilen Emek Abali, Reza Afshar, Francesco Fabbrocino, Anil Misra +1 more
publishedunusual similarity 0.44
Abstract · Accepted for publication in Mathematics and Mechanics of Complex Systems (MEMOCS)

This study presents an inverse analysis to determine the stiffness parameters of a bimodulus constitutive model formulated within a granular micromechanics framework. Full-field normal strain measurements are obtained by Digital Image Correlation (DIC) during three-point bending tests and are used as experimental input to a hybrid numerical optimization procedure. The experimental campaign is designed to ensure that the measured strain fields remain within the elastic regime. Since the identification is formulated as a nonlinear regression problem, a physically informed initial parameter set is constructed to guide the optimization toward mechanically meaningful values. An initial estimate of the compressive stiffness is first obtained from the available manufacturer data. The tension-compression stiffness asymmetry is then estimated from the experimentally measured neutral-axis shift, which provides a macroscopic signature of bimodulus material behavior in bending. These estimates define the initial parameter set, which is subsequently refined through a hybrid optimization procedure based on the full-field comparison of the experimental and numerical normal strain distributions. The identified parameter set enables the numerical model to reproduce more closely both the through-depth profile and the spatial distribution of the normal strain component over the selected surface region. These results demonstrate that full-field normal strain measurements provide an effective basis for identifying the stiffness parameters of bimodulus granular micromechanics models. The largest differences between the numerical and experimental strain fields are observed near the load-application region, where localized strain variations are induced by the concentrated load.

0.37