CS Paper Radar

Full-field laser-Doppler-vibrometry FRF dataset for a four-bolt aluminum plate under bolt-torque variation

Berkay Kullukcu, Dina Hannebauer

eess.SP eess.SY ·submitted 2026-09-04 17:28 UTC · v1
publishedunusual

Abstract

The dataset described in this article was constructed using the results of laser Doppler vibrometry experiments conducted on an aluminum plate having four bolts. The database captures the variation in the vibration characteristics of the plate as a function of changes in tightening torque on the bolts. In total, there were 18 different states for the tightening torque, ranging from a situation where all bolts are tightened to all bolts being loose. Other possible combinations include states with varying torque applied to just one bolt, and those involving multiple loose bolts. Data consist of 1,836 files exported from Polytec PSV-500, categorized as amplitude and phase data, for frequency ranges spanning 1 Hz to 51,200 Hz at intervals of 1 Hz. The identified zones were analyzed at 51 scan points for all states of torque. Supporting documents included specifications of the test plate, scan point and torque state information, selected resonance peaks tables, measured frequencies for seven resonance groups, correlation values for all FRF, visualizations, and code scripts.

Closest papers

Nearest neighbours by meaning across the whole index.

Screening bolt loosening in a four-bolt plate with global FRF correlation and local FRAC maps from full-field laser Doppler vibrometry

eess.SP physics.optics ·2026-09-04 ·Berkay Kullukcu, Robin Pianowski, Mehmet Sait Özer, Ercan Altinsoy, Dina Hannebauer
unusual similarity 0.78
Abstract

Full-field laser Doppler vibrometry (LDV) can reveal how bolt torque loss redistributes a frequency response function (FRF) over an entire structure rather than only at a few sensor positions. This work presents a screening procedure for a four-bolt aluminum plate using pointwise amplitude and phase exports of scanned H1 FRFs. Candidate resonances were selected from the all-tight spatial RMS spectrum and tracked in four single-bolt 0 Nm cases. Seven baseline responses remained trackable within prescribed group-specific search windows and were retained as experimental resonance groups RG1-RG7; a dimensionless plate-frequency coefficient was reported alongside each measured frequency. Global changes were quantified using amplitude-only and complex, phase-retaining modal-assurance dissimilarities, and local changes were evaluated using matched-window FRAC-deficit maps and a normalized hotspot-area fraction. The retained groups separate into low-, intermediate-, and high-distortion responses, while the local maps distinguish compact joint-centered changes from distributed FRF redistribution. The workflow therefore links global FRF distortion with spatially resolved interpretation without relying on a trained classifier or specimen-specific node labels.

0.58

PreForceVision: Physics-Guided Optical Estimation of Bolt Preload from Bolt-Head Deformation

cs.AI ·2026-11-06 ·Nehal Afifi, Klaus Rappenecker, Florian Peinhardt, Gerhard Kachel, Alfred Isele +1 more
publishedunusual similarity 0.46
Abstract · 9 pages, Proceedings of the ASME 2026 International Mechanical Engineering Congress and Exposition (IMECE 2026), November 8-12, 2026, Vancou…

Bolt preload is a decisive functional quantity in bolted joints because it determines whether external loads are transmitted primarily through frictional clamping or directly through the bolt. Existing preload measurement techniques, including strain-gauge bolts, force washers, ultrasonic methods, and bolt-length measurements, are effective in certain applications but require additional hardware, coupling, calibration, or joint modifications. This limits their scalability for large numbers of standard fasteners and motivates a non-contact optical approach. This paper proposes PreForceVision, a physics-guided optical framework for estimating bolt preload from preload-induced surface deformation of the bolt-head front face. The method treats preload estimation as an inverse deformation-to-force problem, where deformation of the optically accessible bolt-head surface is extracted from reference-loaded image pairs and related to the internal preload state. Preliminary results for an M16 strength class 8.8 bolt show an approximately \SI{12}{\micro\meter} simulated head-face depression at \SI{90}{\kilo\newton}, strain-gauge measurements of comparable magnitude, and an optical 3D measured central depression of approximately \SIrange{10}{20}{\micro\meter}. The contribution is a physics-guided optical methodology combining controlled image-pair acquisition, DIC- or optical-flow-based deformation extraction, multimodal validation, and uncertainty-aware regression for rough preload estimation under controlled conditions.

0.38

Joint nonlinearity in a stiffened aluminium wingbox panel and what it requires of a reduced basis

cs.CE eess.SYmath-phmath.NA ·2026-09-09 ·Nikolaos D. Tantaroudas, Evangelos Papatheou
similarity 0.38
Abstract · 20 pages, 14 figures

A shell finite-element model of a stiffened aluminium wingbox panel, a laboratory structure shared by several experimental studies, is built with its plate-to-stiffener joints at the $78$ physical fastener positions and calibrated against measured modal data, a six-parameter sensitivity update of the substructure moduli within $\pm20\%$ reproducing the first five measured modes to $1.1$--$4.3\%$ with modal-assurance values of $0.88$--$1.00$. Making the fasteners nonlinear, at equal mesh, mass and damping, shows that joint nonlinearity enters the response strongly asymmetrically. Hardening is almost invisible, at most $+1\%$ in frequency, whereas softening or slipping the joints moves the first three resonances by $-2.1$, $-4.9$ and $-9.2\%$, and friction removes up to $80\%$ of the resonant peak before it recovers. Newmark integration of all $18{,}804$ degrees of freedom and a harmonic balance condensed exactly onto the joints and continued in arclength agree to $5.5\times10^{-4}$. A projection-based nonlinear model order reduction then locates the criterion that a jointed structure imposes on a reduced basis. The binding quantity is not the linear response, which eleven vectors reproduce to better than $0.01\%$, but the receptance of the structure between the joints, of which $126$ global eigenvectors carry about $2\%$, and without which the reduced model overpredicts the hardening shift of the fundamental by a factor of thirty and returns a value beyond the rigid-joint limit of the panel.

0.32

Sparse-LDV Neural Reconstruction with Vibro-Acoustic Evidence Fusion for Early Bolt Preload Loss

eess.SP ·2026-09-04 ·Berkay Kullukcu, Dina Hannebauer
similarity 0.36
Abstract

Laser Doppler vibrometry (LDV) is costly, while early bolt-preload loss may produce weak and resonance-dependent changes. We combine sparse-LDV reconstruction referenced to a dense commissioning baseline with force-normalized microphone evidence. At m = 24 measurement nodes, each single-bolt 5-Nm state is reconstructed by a neural-network fold that excludes that state from training. A late-fusion rule calibrated on the healthy baseline combines the 90th percentile of local-FRAC deficits at unmeasured nodes with microphone H1 changes normalized by impact-level repeatability. Sparse LDV alone flags 24/28 mild condition-resonance pairs (50% preload loss) and acoustic evidence flags 25/28, fusion flags all 28/28. All four LDV misses occur at RG3 (resonance group) and are recovered acoustically. Fusion remains 28/28 for repeatability-normalized acoustic thresholds from 3 to 10. The result supports complementary vibro-acoustic evidence for early preload-loss screening while avoiding pointwise fusion of separately acquired campaigns.

0.25

Sensitivity Comparison of Microwave-Frequency and Optical Fibre Interferometry Based on State-of-the-Art Components

cs.NI physics.optics ·2026-08-31 ·Georgios Aias Karydis, Marco Fasano, Paola Parolari, Pierpaolo Boffi, Charis Mesaritakis +1 more
publishedunusual similarity 0.33
Abstract · 3 pages, the work will be presented at European conference on Optical Communications (ECOC), 2026

We compare the sensitivity of fibre interferometers to vibrations using microwave oscillators and state of the art lasers over distances up to 70 km. High spectral purity lasers outperform only above 10 Hz, highlighting microwave advantages at low frequencies and the potential of hybrid microwave optical interferometry systems

0.36

Integrated Laser Scanning and Image-Based Topology Optimization Techniques for Detection and Quantification of Visible and Subsurface Structural Defects

cs.CV ·2026-09-01 ·Mehrdad Shafiei Dizaji, Devin Harris
unusual similarity 0.33
Abstract · 9, 5

Reliable characterization of structural defects requires methods capable of resolving both directly observable surface damage and damage that is not visible from the inspected surface. This study presents two complementary non-contact, vision-based approaches for the detection and quantitative characterization of defects in structural components. The first approach employs high-resolution laser scanning to generate three-dimensional (3D) point clouds of damaged steel specimens. Comparative processing of measured and reference point clouds is used to localize damaged regions, quantify geometric loss, and transfer the measured defect geometry to a finite element representation. The second approach combines full-field surface deformation measurements obtained using three-dimensional digital image correlation (3D-DIC) with finite element model updating and topology optimization. In this inverse framework, measured surface response is used to infer subsurface abnormalities through their influence on the spatial distribution of structural response. Experimental steel-beam specimens containing controlled smooth defects and randomly distributed defects are used to evaluate the approaches. Comparisons with milling-based ground-truth measurements demonstrate that both methods can identify and quantify defect geometry, while providing complementary information for visible and subsurface damage assessment. The combined framework establishes a pathway toward high-fidelity, non-contact structural condition assessment and model updating for components with complex and irregular damage.

0.25

An Absolute Acoustic Readout of Plate Wave Speed for Bullion Authentication, Using a Measured Fill-Factor Correction for Struck Coins

eess.AS physics.class-ph ·2026-10-21 ·Sylvia Dong, Takyiu Liu
unusual similarity 0.32
Abstract · 16 pages, 9 figures, 10 tables

Acoustic "ping" testing of bullion is empirical: it compares a coin's ringing frequency with frequencies recorded for the same coin type, so it cannot assess a specimen absent from the reference library. This work replaces the comparison with an absolute measurement, computed from the measured resonance and geometry through a physical model rather than retrieved from a library. Free-plate flexural resonance is calibrated on five machined aluminium discs ($a/t=2.58$--$10.75$), recovering an empirical finite-thickness coefficient $β=0.895\pm0.047$ that reduces the worst-case departure from thin-plate theory from 8.9% to 0.75%. A fill factor, the ratio of a coin's displaced volume to its nominal cylinder, supplies the effective thickness that relief hides from calipers, extending the calibration to struck coins. The readout is the plate wave speed $c_{p}=\sqrt{E/ρ(1-ν^{2})}$, a material constant, conditioned on an assumed Poisson's ratio. On six struck 0.999 copper rounds not used in the calibration it recovers a Young's modulus of $119.1\pm6.7$ GPa, inside the accepted 110 to 128 GPa. The recovered wave speeds form distinct observed groups across the measured specimens, with the strongest independent validation provided by these copper rounds. The $(3,0)/(2,0)$ mode ratio falls below its thin-plate value in thirteen of sixteen specimens (one-sided sign test, $p=0.011$), as finite-thickness theory predicts. Weighing displaced mass to 0.1 mg rather than 0.1 g cut per-specimen volume uncertainty from 1.6% to 30% to 0.5% to 2.6% and shrank an apparent 11% design-dependent bias to a 4.7% residual on one deeply relieved silver design. The readout is now limited by tabulated elastic constants and the assumed Poisson's ratio, not by the acoustics, which are reproducible to 0.15%.

0.27

Fast Whittle Maximum-Likelihood Parametric Spectrum Estimation for Weather-Radar Doppler Moments

eess.SP ·2026-10-06 ·Tworit Dash, Alexander Yarovoy
published similarity 0.32
Abstract · 4 figures, 1 table

The computational cost of Whittle maximum-likelihood parametric spectrum estimation (PSE) for short-dwell weather-radar Doppler moment retrieval is addressed. PSE can reduce finite-sample bias, especially for short coherent processing intervals and broad spectra, but repeated likelihood evaluations make direct use expensive. A fast implementation of the finite-sample Gaussian Doppler model is introduced by writing the likelihood in terms of closed-form autocorrelation lags and synthesizing the model spectrum and analytic derivatives by fast Fourier transforms (FFTs) on the same N-point grid as the periodogram. The estimator is extended to jointly estimate total power, normalized mean Doppler frequency, and normalized spectral width. Monte Carlo simulations with 1000 noise realizations show that the fast PSE keeps the accuracy advantage of the original PSE, while objective-level timing confirms the reduction from dense lag-to-frequency synthesis to FFT-based evaluation.

0.36