CS Paper Radar

Sensitivity Comparison of Microwave-Frequency and Optical Fibre Interferometry Based on State-of-the-Art Components

Georgios Aias Karydis, Marco Fasano, Paola Parolari, Pierpaolo Boffi, Charis Mesaritakis, Adonis Bogris

cs.NI physics.optics ·submitted 2026-08-31 06:09 UTC · v1
publishedunusual

Abstract

We compare the sensitivity of fibre interferometers to vibrations using microwave oscillators and state of the art lasers over distances up to 70 km. High spectral purity lasers outperform only above 10 Hz, highlighting microwave advantages at low frequencies and the potential of hybrid microwave optical interferometry systems

Comment
3 pages, the work will be presented at European conference on Optical Communications (ECOC), 2026

Closest papers

Nearest neighbours by meaning across the whole index.

LMMSE-Based Phase Estimator for Fiber-Optic Coherent Spread-Spectrum FBG-Based Sensing Systems

eess.SP ·2026-09-19 ·Yiyang Bai, Élie Awwad, Michèle Wigger
publishedtheory similarity 0.43
Abstract

Fiber Bragg grating (FBG)-based sensing enables localized strain and temperature monitoring by tracking the phase changes of the light reflected from FBGs inserted along a fiber. A major source of disturbance in such systems is laser phase noise, and its influence is typically mitigated by means of additional hardware. In this article, we propose to mitigate the influence of laser phase noise by means of digital signal processing. We propose a practical estimator for coherent single-polarization spread-spectrum FBG-based sensing systems, which is motivated by linearizing the complex received signal and approximating the loss function to formulate a minimum mean square error (MMSE) estimation problem. Moreover, a Cramer-Rao lower bound for this FBG-based estimation problem is presented. Our simulation results demonstrate that the performance of our proposed estimator lies close to the Cramer-Rao lower bound, thus indicating that our estimator effectively compensates for phase noise in FBG-based sensing systems.

0.36

Non-Imaging Optical Tactile Sensors for Robotics: Transduction Principles, System Integration, and Robotic Applications

cs.RO ·2026-11-16 ·Hao Wu, Yu Feng, Haotian Guo, Huichan Zhao, Changsheng Wu +1 more
similarity 0.42
Abstract · 35 pages, 9 figures

Non-imaging optical tactile sensors encode contact through changes in optical intensity, wavelength, spectra, or photon counts, offering diverse architectures for robotic touch. Their usefulness depends on whether contact variables can be reliably distinguished from coupled mechanical and environmental effects, and whether the resulting information can be delivered in time to guide action. This review develops a unified framework linking mechanical load transmission, optical encoding, readout, and tactile inference to robotic task requirements. It examines reflective and waveguide-based devices, micro/nanofibers, fiber gratings, interferometric and resonant structures, and mechanoluminescent composites. Three considerations emerge across these approaches. First, high optical sensitivity supports accurate tactile estimation only when target variables remain identifiable under the relevant contact and calibration conditions. Second, spatial coverage and feedback timing must be assessed at the system level, accounting for multiplexing, acquisition, demodulation, and inference. Third, device characterization, offline recognition, and closed-loop robotic performance provide distinct levels of evidence and require different evaluation criteria. Representative studies illustrate how these considerations shape force estimation, contact localization, slip correction and distributed interaction. This review concludes with priorities for calibration transfer, reliable interfaces, scalable readout, and task-based validation, providing a basis for selecting and developing non-imaging optical tactile architectures for robotics.

0.16

Covariance-Weighted Spectral Delay Fusion With a One-Dimensional Affine Model for High-Precision Distributed Optical-Fiber Sensing

eess.SP ·2026-09-15 ·Zhiyang Xue, Huan Huang, Ziang Chen, Zhongxing Tian, Zeyu Feng +5 more
unusual similarity 0.41
Abstract · The manuscript has been submitted for possible publication

Periodic disturbances can produce ambiguous delay estimates, limiting reliable high-precision localization in distributed optical-fiber sensing. We develop spectral delay fusion for a sensing system using a dual-wavelength bidirectional Mach-Zehnder interferometer, with four phase traces recovered by heterodyne detection and digital demodulation. With calibrated propagation parameters and timing offsets fixed, the six pairwise delay predictions form a one-dimensional affine line segment parameterized by the position of a single dominant disturbance, with sensitivities determined by propagation direction and chromatic dispersion. A generalized least-squares estimator combines unwrapped delays from robust cross-spectral phase slopes with wrapped delays from polarity-invariant phase alignment to jointly estimate position and integer ambiguities under the proposed model, using an effective joint covariance to account for shared-channel and cross-representation dependence. Experiments use a 131.335-km sensing fiber at 1530 and 1550 nm, with periodic phase perturbations applied at five nominal positions from 25 to 125 km. Across the reported groups of 20 records, the proposed method yields sample standard deviations of 1.007-1.685 m at a drive voltage of 500 mV and 0.449-1.324 m at 1 V. The ratio of the smallest single-pair sample standard deviation to that of the proposed method ranges from 2.57 to 19.56 at 500 mV and from 2.12 to 2900 at 1 V. The upper ratio reflects unstable single-pair phase-slope delay estimates for periodic disturbances in the 1-V, nominal 50-km group, where the proposed covariance-weighted fusion maintains meter-scale localization repeatability.

0.27

Quasi-Single-Mode Transmission over Ultra-Low Loss Few-Mode Fibre for Data Centre Interconnects

eess.SP ·2026-08-14 ·Fabio A. Barbosa, Rostislav R. Khrapko, Ming-Jun Li, Filipe M. Ferreira
published similarity 0.40
Abstract · This article has been accepted for publication in IEEE Photonics Technology Letters. This is the author's version which has not been fully e…

A novel ultra-low-loss few-mode fibre is experimentally investigated for quasi-single-mode transmission over data centre interconnect distances. Multipath interference is characterised across the C-band matching a modified Gaussian noise model to experimental results obtained with conventional training-sequence-based digital signal processing, enabling inservice assessment without traffic disruption. This model shows strong agreement with power-fluctuation measurements performed on a dedicated unmodulated-laser setup. The impact of equaliser length and digital backpropagation on system performance is also analysed. Compared with standard ultralow-loss single-mode fibres, transmission experiments reveal only minor signal-to-noise ratio degradation for up to 42-Gbaud DP-256-QAM over a 24-km span. These findings highlight the potential of ultra-low-loss few-mode fibre for scalable, highcapacity data centre interconnect applications while offering potential for future space-division multiplexing upgrades.

0.20

Modeling and Design of a Diaphragm-Integrated Photonic Waveguide Microphone

eess.AS ·2026-10-13 ·Xiaoyu Niu, Yuqi Meng, Zihuan Liu, Ehsan Vatankhah, Neal Hall
benchmark similarity 0.40
Abstract · 14 pages

Can an integrated optical readout improve the useful operating range of a miniature microphone? We address this question with an analytical model of a diaphragm carrying the sensing arm of a Mach-Zehnder interferometer (MZI). The model links pressure-induced bending to waveguide elongation and then to photocurrent, allowing mechanical sensitivity and optical detection limits to be assessed separately. Optical shot noise and back-cavity thermomechanical noise set the pressure resolution, while a 10% total harmonic distortion criterion defines acoustic overload. Two operating regimes are examined: a compact MEMS microphone with 1 mW optical input and a measurement microphone with 100 mW optical input. For the compact case, a 1 mm diameter, 1 micrometer thick, stress-free silicon diaphragm and 100% modulation efficiency give a predicted signal-to-noise ratio of 78 dB and acoustic overload pressure of 124 dB. The higher-power case lowers the modeled noise floor and increases dynamic range relative to the selected measurement microphone benchmark. These estimates rely on favorable assumptions and do not establish a substantial overall advantage in conventional microphone applications. Remote optical interrogation offers a separate motivation for harsh-environment sensing, but the temperature tolerance of the proposed sensing head remains unverified. The analysis identifies the design tradeoffs and measurements needed to test the predicted performance.

0.09

13,000-Fold Frequency Down Conversion From 280 MHz to 21 kHz Using Mechanical Frequency Combs

eess.SP ·2026-11-05 ·Ian Anderson, Zihuan Liu, Vivek Tallavajhula, Yen-Chen Wang, Tzu-Hsuan Hsu +2 more
unusual similarity 0.40
Abstract · 4 pages, 6 figures

Optical frequency combs bridge the microwave and terahertz regimes by down-converting terahertz optical energy into microwave signals. A photodetector converts the comb's equally spaced lines, generated through optical nonlinearities, into a low-frequency tone at their spacing. Here, we present the first mechanical version of this process, using mechanical frequency combs to downconvert energy over 4 orders of magnitude, from the MHz to kHz regime. Thin-film lithium niobate (LN) is used to design an acoustic resonator with a wide range of mode frequencies. We achieve phononic comb excitation from 250 MHz to 900 MHz and compare the electrical and laser Doppler vibrometer (LDV) measurements at 277 MHz. We then show the low-frequency spectrum of the devices, highlighting mechanical motion at the comb's spacing and demonstrating energy transfer from 277 MHz to 21 kHz.

0.30

Instrument-Level Validation of Upper Sideband Syntonization Concept

eess.SP astro-ph.IM ·2026-09-09 ·Volodymyr Kudriashov, Manuel Martin-Neira
unusual similarity 0.40
Abstract · 10 pages, 9 figures

Upper Sideband Syntonization (USBS) is a two-way frequency-transfer concept proposed by the European Space Agency for distributed space radio interferometric systems. Previous investigations validated the concept primarily through frequency-stability and phase-transfer measurements. This work demonstrates the first end-to-end instrument-level validation of the USBS concept through coherent W-band cross-correlation measurements and image reconstruction. A P=2 USBS breadboard was integrated with a W-band radio interferometer developed for this test. The synchronized local oscillators (LOs) were evaluated through long-term cross-correlation measurements and coherent imaging of a point-like noise source. The results were compared with those obtained using a conventional common LO as well as two independent free-running LOs. The USBS-derived LOs maintained coherence over 500 s of cumulative effective integration time acquired over approximately five days of elapsed time and preserved inter-session phase stability over measurements spanning 40 days. The reconstructed image is nearly indistinguishable from that obtained with a common LO, whereas independent free-running LOs lead to severe coherence degradation, image distortion, and approximately 38 dB loss of peak response. The results demonstrate that USBS preserves the interferometric coherence required for W-band imaging and present the first end-to-end instrument-level validation of the USBS syntonization concept for future distributed space radio interferometric missions

0.30

Performance Analysis and Design of an Optomechanical Microphone Using an Integrated Photonic Waveguide Interferometer

eess.AS eess.SYphysics.app-ph ·2026-09-21 ·Xiaoyu Niu, Yuqi Meng, Zihuan Liu, Ehsan Vatankhah, Neal Hall
unusual similarity 0.39
Abstract · 16 pages, 12 figures, 1 table

We present an optomechanical microphone based on a diaphragm-integrated photonic waveguide Mach-Zehnder interferometer. Acoustic pressure deforms the MEMS diaphragm, inducing strain in the sensing waveguide and changing its optical path length. We analytically evaluate the optical and mechanical transduction mechanisms and key figures of merit, including signal-to-noise ratio, dynamic range, acoustic overload pressure, and minimum detectable pressure. Two design cases are considered: a MEMS microphone and a measurement microphone. The results indicate competitive performance but no substantial overall advantage over state-of-the-art microphones in conventional applications. The architecture may nevertheless offer advantages for high-temperature and other harsh-environment sensing applications.

0.30