CS Paper Radar

Joint nonlinearity in a stiffened aluminium wingbox panel and what it requires of a reduced basis

Nikolaos D. Tantaroudas, Evangelos Papatheou

cs.CE eess.SYmath-phmath.NA ·submitted 2026-09-09 12:09 UTC · v1

Abstract

A shell finite-element model of a stiffened aluminium wingbox panel, a laboratory structure shared by several experimental studies, is built with its plate-to-stiffener joints at the $78$ physical fastener positions and calibrated against measured modal data, a six-parameter sensitivity update of the substructure moduli within $\pm20\%$ reproducing the first five measured modes to $1.1$--$4.3\%$ with modal-assurance values of $0.88$--$1.00$. Making the fasteners nonlinear, at equal mesh, mass and damping, shows that joint nonlinearity enters the response strongly asymmetrically. Hardening is almost invisible, at most $+1\%$ in frequency, whereas softening or slipping the joints moves the first three resonances by $-2.1$, $-4.9$ and $-9.2\%$, and friction removes up to $80\%$ of the resonant peak before it recovers. Newmark integration of all $18{,}804$ degrees of freedom and a harmonic balance condensed exactly onto the joints and continued in arclength agree to $5.5\times10^{-4}$. A projection-based nonlinear model order reduction then locates the criterion that a jointed structure imposes on a reduced basis. The binding quantity is not the linear response, which eleven vectors reproduce to better than $0.01\%$, but the receptance of the structure between the joints, of which $126$ global eigenvectors carry about $2\%$, and without which the reduced model overpredicts the hardening shift of the fundamental by a factor of thirty and returns a value beyond the rigid-joint limit of the panel.

Comment
20 pages, 14 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Element-dependent buckling loads of stiffened panels under cantilevered shear

cs.CE math.NA ·2026-09-19 ·Lifeng Wang, Zhongli Qiu, Xuanhao Cheng, Run Du, Wenming Cheng +2 more
similarity 0.61
Abstract · 27 pages, 7 figures, 11 tables

The linearized buckling load of a stiffened panel depends on the stress stiffness its shell element assembles. We read it from exported operators against three truncations of one second variation. The classic pass of ANSYS SHELL181 carries a rotation-rotation block pairing the drilling freedom with the bending rotations and its perturbation pass does not; removing the block recovers the perturbation load factor to 0.02%. SHELL281 carries block and couplings in both passes. Abaqus S4 matches the critical mode of the complete second variation to 1.0000 on the translations and its load factor to 1.7%, against 17% and 34% for the other two forms. On an optimized panel under cantilevered shear a 20-node continuum lies 3% to 6% above that form, S4 and SHELL281, 11% and 23% below both SHELL181 passes and 25% above Abaqus S8R, at the finest meshes. On a conventionally stiffened panel the SHELL181 passes stand 1.0% and 3.5% above the complete form, 9% and 21% at half the rib pitch; under a shear flow, on cylinders, open beams and under axial compression the three forms coincide and no pass parts by more than 0.3%.

0.24

Cosserat Modeling of Trimmed Helicoid Soft Arms with a Separated-Section Constitutive Law

cs.RO ·2026-09-21 ·Zhihang Qin, Linxin Hou, Zeyu Zhong, Yuchen Sun, Wenci Xin +8 more
similarity 0.47
Abstract

Cosserat rod models for soft robots usually construct sectional stiffness by summing material properties over a common cross-section. This assumption becomes inaccurate for trimmed helicoid arms, where load-bearing helix domains are separated and connected only through sparse fused crossings. This paper formulates a separated-section constitutive law that evaluates each helix domain in its local frame and pulls its constitutive response back to the backbone, yielding an effective backbone stiffness. Sparse-fusion mechanics captures the additional compliance caused by relative motion between neighboring domains and determines channel-wise reduction profiles $η_c(s/L)$ for bending, torsion, and extension. The resulting effective sectional stiffness is strongly anisotropic: bending and extension are reduced by about one order of magnitude, whereas torsion remains close to the effective backbone stiffness. The resulting sectional law is embedded in a geometrically exact dynamic Cosserat model with GVS discretization and routed-tendon actuation. Across 103 measured configurations, the three datasets give pooled normalized position errors of $7.7 \ \%$, $6.7 \ \%$, and $7.8 \ \%$, while each full-arm solve requires approximately $0.3 \ \mathrm{s}$ on one CPU core (Intel Xeon, Cascade Lake, $2.8 \mathrm{GHz}$), enabling rapid model-based planning, state and load estimation, and morphology--control co-design for architected soft robots.

0.38

Structure-preserving reduced-order models of thin panels in supersonic and hypersonic flow

cs.CE cs.LGmath.NA ·2026-10-22 ·Miguel A. Aguilo
similarity 0.47
Abstract · 68 pages, 15 figures

We build structure-preserving reduced-order models for both challenge problems of the AePW-4 High-Speed Working Group. They are a clamped thin panel at Mach 1.92 (RC-19) and a cantilever plate at Mach 5.85 (HyMAX). The published data for each case hold no time-resolved response and no repeated runs. The physics must therefore be carried by the form of the model. One construction gives two models per problem. A Ritz-Galerkin reference model describes the plate. A learned model keeps the reference model's exact potential, fits the remaining generalized forces, and trains only a dissipation that cannot add energy. Its energy balance holds for any weights by construction. On the trained model the worst relative residual is 2.2e-15. On RC-19, shock relations predict a pressure ratio of 1.521 across the panel. Pressure-sensitive paint measured the same value. Thirty runs of the learned model place the mean dominant frequency within 1.0% of the measured 236 Hz. At one periodic and one chaotic condition, the learned model reproduces the response regime of a published reduced-order model in all sixteen runs. It does so without that model's 113 Hz spectral peak, which the measurements do not show. Measured displacements can also correct the chaotic response through one more force that respects the energy balance. We tested this on synthetic data at the experiment's 5 kHz sampling rate. The state error is 1.25% of the panel thickness without noise and 3.5% with 10 micrometers of noise. On HyMAX the learned model follows the reference model's trailing-edge displacement for 65 ms with a relative error of 3.7%. These results show that a model whose structure carries the physics can match measured flutter behavior when the available data cannot train it.

0.30

Three Machines Suffice for Local Hardening of Electromechanical Oscillations

eess.SY math.DS ·2026-10-17 ·Kai Sun
unusual similarity 0.46
Abstract

The single-degree-of-freedom swing equation with sinusoidal coupling is locally softening: its oscillation frequency decreases with oscillation level near a stable equilibrium. Nonlinear modal interaction, however, can reverse this trend in multimachine systems. This letter gives a necessary-and-sufficient condition for strict leading-order local hardening, measured with respect to canonical action, in two symmetric three-machine operating-point families with equal or opposite power injections at the equal-inertia machines. An exact two-coordinate reduction expresses the condition in terms of a squared modal-frequency ratio and a dimensionless nonlinear coupling measure. The proof retains the induced mean shift and second harmonic and shows that the companion modal family remains locally softening. The criterion recovers both an equal-inertia hardening example and an exact large-inertia threshold. Coherent aggregation recovers the two-machine softening law, whereas the infinite-bus limit retains two dynamic rotor angles and permits hardening. An exact coherent-group extension preserves the selected periodic family, frequency, and canonical action for every finite machine count greater than two. Thus, three finite-inertia machines are the minimum permitting local hardening in the stated undamped, lossless classical model.

0.24

Component-wise hyperreduction for nonlinear solid mechanics problems

cs.CE ·2026-08-19 ·Stephan Ritzert, Jannick Kehls, Erik Faust, Hagen Holthusen, Stefanie Reese +1 more
similarity 0.46
Abstract

Hyperreduced nonlinear solid-mechanics components can be generated offline and reused as transferable building blocks across different assemblies, boundary conditions, meshes, material parameters, and constitutive models. We use proper orthogonal decomposition (POD) and energy conserving sampling and weighting (ECSW) on the component level and connect the substructures by mortar mesh tying. The POD modes and the ECSW weights and elements are computed offline from simulations of single components and the finite rigid body motions are treated by 12 additional rigid body modes per substructure. The numerical examples demonstrate errors below 1 \% for large quasi-static assemblies while evaluating less than 10 \% of the elements. The same component bases and ECSW elements are successfully reused for finite-strain viscoelastic dynamics, although they were trained only on elastic Neo-Hookean component simulations. These results indicate that component-wise hyperreduction can provide reusable reduced building blocks for modular nonlinear solid-mechanics simulations.

0.51

Constrained neural softening functions for the Mullins effect in parameter-dependent materials

cs.CE ·2026-10-25 ·Dominik K. Klein, Jonas Fey, Maximilian Kannapinn, Oliver Weeger
similarity 0.44
Abstract

Accurately capturing the Mullins effect across varying material compositions remains challenging, as constitutive models must unify flexible representations of stress softening with physical consistency and robust parameter calibration. In this work, we investigate parameter-dependent physics-augmented neural network constitutive models within the pseudo-elastic modeling framework, focusing on structural constraints that ensure physically admissible neural softening functions. This paper has three key contributions: (1) We formulate different neural softening functions within the pseudo-elastic framework, including a multiplicative decomposition of the softening function that enables parameter-dependent ansatz functions satisfying common mechanical constitutive conditions by construction. (2) We derive a sufficient condition for ellipticity of pseudo-elastic constitutive models, which can be enforced in the constitutive models by construction. (3) We systematically investigate how flexibility and structural constraints influence the performance of neural softening functions in terms of prediction accuracy and calibration robustness. For this, we consider multiaxial experimental data of carbon black-filled EPDM rubber synthesized with varying amounts of curatives. The findings of our work suggest that neural softening functions are a promising extension of the classical pseudo-elastic framework and, when subject to suitable constraints, can improve predictive accuracy for highly nonlinear, parameter-dependent materials.

0.28

PoliVEM: a Python-driven virtual element framework for computational solid mechanics

cs.SE ·2026-09-26 ·Paulo Akira F. Enabe, Rodrigo Provasi
similarity 0.43
Abstract

This work presents PoliVEM, a software framework for the Virtual Element Method (VEM) in computational solid and structural mechanics. A C++17 computational core and a Python interface place one-dimensional beams, two- and three-dimensional elasticity, axisymmetric elasticity, transient diffusion, and finite-strain hyperelasticity in a common implementation. The framework stores vertex, edge, face, and cell degrees of freedom in one hierarchy, constructs the energy, strain, and $L^2$ projections from common polynomial data, and retains the consistency--stabilization split at the element level. The core separates the mesh, material, element, assembler, and solver responsibilities and combines them by composition. A new formulation supplies its projection, discrete form, and stabilization while reusing the mesh representation, degree-of-freedom numbering, boundary-condition treatment, sparse assembly, algebraic solvers, and Python binding pattern. The numerical infrastructure includes polygonal and polyhedral mesh input, higher-order entity numbering, cached projection operators, static condensation, coloured sparse assembly, linear solver selection based on the matrix structure, an incremental Newton method with line search and regularization, and explicit and implicit time integration. Three numerical experiments examine the shared implementation through polynomial reproduction, recovery after static condensation, higher-order degree-of-freedom handling, polygonal and polyhedral meshes, patch tests, stiffness spectra, and comparisons with independent finite element calculations. The results verify the common core for the beam and two- and three-dimensional elasticity formulations. They also identify the scaling of high-order polynomial bases on anisotropic cells and the memory required by sparse direct factorizations as the main limitations of the current implementation.

0.22

An FE2 model for shear-deformable beams considering periodic lattice-like truss mesostructures

cs.CE ·2026-10-06 ·Julian Ochs, Jens Wackerfuß
similarity 0.42
Abstract · 37 pages, 21 figures, 10 tables, 66 references

The increasing use of lattice-like architectures in load-bearing members, facilitated by advances in additive manufacturing, calls for efficient multiscale approaches to their structural analysis. For slender lattice-like structures, beam models provide a computationally efficient macroscopic representation while retaining the ability to account for the underlying lattice architecture through an homogenization approach. Although finite element squared (FE2) approaches combining beam models at the macroscopic scale with continuum models at the microscopic scale have been established, an FE2 framework combining a beam-based macroscopic model with a truss-based microscopic model of a lattice structure has not yet been reported. To address this gap, an FE2 framework is developed for three-dimensional shear-deformable beams with periodically repeated lattice-like microstructures and periodic displacement boundary conditions. The proposed FE2 framework introduces constraint equations that (a) prevent rigid-body translations and rotations of the representative volume element (RVE) without imposing additional kinematic restrictions and (b) ensure that the homogenized stress resultants and material matrix are independent of the selected RVE length. To mitigate artificial boundary effects arising at the boundaries of the lattice-like RVE, local correction factors are introduced. The framework is assessed through numerical studies of two- and three-dimensional lattice-like structures with different geometries, considering both geometric and material linearity and nonlinearity. The results demonstrate the independence of the homogenized stress resultants and material matrix from the selected RVE length and show good agreement with the corresponding reference models in all investigated cases.

0.28