CS Paper Radar

Consistent Mapping for Fluid Structure Interaction with Geometrically Nonlinear Isogeometric Beams

Juan Ignacio Camarotti, Ricky Aristio, Roland Wüchner

cs.CE physics.comp-ph ·submitted 2026-11-09 15:46 UTC · v1
benchmark

Abstract

Isogeometric beam formulations provide an efficient reduced-dimensional representation of slender structures, combining accurate geometry and high-order continuity with few structural degrees of freedom. Their application to fluid--structure interaction (FSI) requires transferring motion and loads between the one-dimensional beam centerline and the surrounding fluid interface. While mapping strategies exist for conventional finite element beams, geometrically nonlinear isogeometric formulations require operators consistent with their spline-based kinematics and distinct descriptions of cross-sectional rotation. This work develops consistent beam-to-surface mappings for geometrically nonlinear isogeometric Bernoulli and Timoshenko beams in partitioned FSI. Fluid-interface points are attached to the beam in the reference configuration and reconstructed using the nonlinear kinematics of each formulation. Consistent linearization yields a configuration-dependent mapping operator whose transpose ensures work-conjugate load transfer. The formulations are verified through analytical deformation tests, convergence studies, and virtual-work checks, and evaluated in beam-based adaptations of the Mok and Turek--Hron benchmarks and the Goland wing flutter benchmark. The results confirm accurate interface reconstruction and work-conjugate load transfer under large deformations, while demonstrating the applicability of both beam formulations to coupled FSI problems.

Closest papers

Nearest neighbours by meaning across the whole index.

A space-time finite element formulation for geometrically exact shear-deformable beams

cs.CE math.NA ·2026-10-02 ·Ivo Steinbrecher, Alexander Humer
similarity 0.62
Abstract

We present a space-time finite element formulation for the transient analysis of geometrically exact shear-deformable beams. The formulation treats space and time within a unified finite element framework and employs a mixed approach in which translational and angular velocities are introduced as independent fields. The rotation field is parametrized using nodal rotation (pseudo-)vectors and a suitable objective interpolation of the triad field is employed. The resulting formulation supports generally curved beam structures, including geometric kinks and rigid joints. Furthermore, time-dependent material domains can be represented directly through the geometry of the space-time surface, enabling the treatment of non-material boundaries without modifying the underlying beam formulation. Numerical examples demonstrate convergence to solutions obtained with classical time-stepping schemes, objectivity of the formulation, and the influence of the space-time stabilization. Finally, the sliding spaghetti problem illustrates the applicability of the proposed approach to axially moving continua.

0.19

Compositional Aeroelastic Operators for Morphing Flexible Multibody Aircraft: A Geometric Framework with Structural Verification

cs.CE math.NAphysics.flu-dyn ·2026-08-15 ·Gelin Chen, Chen Song, Chao Yang
similarity 0.59
Abstract · 30 pages, 2 figures, 2 tables

Morphing flexible multibody aircraft require structural strain, aerodynamic geometry, surface velocity, and generalized loading to remain compatible as joints and flexible components change configuration. A compositional formulation is developed around an assumed material attachment between each lifting surface and a geometrically exact beam. Separating the component root pose from the section field shows that the body strain and elastic potential of a component depend on its own elastic coordinates, while upstream motion enters kinetic terms and external-load pullbacks. At element level, an exact relative logarithm $d$ supplies strain and potential energy, whereas a reference-anchored section coordinate $σ$ supplies deformed section geometry. Finite-order expansions retain the finite reference geometry exactly and truncate only endpoint perturbations. The attachment map then generates surface points, tangents, normals, velocities, and force Jacobians from common section kinematics. Euler--Poincare beam balance, moving-surface potential-flow relations, graph cotangent assembly, and the associated semidiscrete power identity are stated in a common twist--wrench convention. Collocation, pressure, equivalent-load, and structural-station sites are distinguished to expose their approximation errors. Verification gives the expected $N_d+1$ convergence order for degree-$N_d$ relative-log expansions. In a geometrically nonlinear cantilever comparison, a cubic static-manifold correction reduces mean full-record displacement error from $0.479$ to $0.255$ over four completed load cases. These results provide structural and interface-level evidence rather than validation of a complete aircraft aeroelastic prediction.

0.10

A co-rotational formulation for arbitrarily shaped planar beams under large displacements and rotations

cs.CE ·2026-08-24 ·Linh T. M. Phi, Zhangxian Yuan
similarity 0.57
Abstract

A planar co-rotational beam formulation is proposed for the large displacement and large rotation analysis of beams with arbitrary initial geometries. A local frame is attached to each differential beam segment and follows its rigid body translation and rotation, enabling a consistent kinematic description suitable for higher-order basis functions. An auxiliary straight reference configuration is introduced so that both the arbitrary initial configuration and the current deformed configuration can be described relative to a common reference, enabling arbitrary initial geometries to be treated within the co-rotational framework. While the framework is general and applicable to a wide range of higher-order basis functions, Non-Uniform Rational B-Splines (NURBS) basis functions are adopted in this study to exploit their superior geometric representation and smoothness. The performance of the proposed formulation is evaluated through five numerical examples, including static, post-buckling, dynamic, and coupled static-dynamic cases. The results demonstrate excellent convergence, accurate prediction of large-deformation responses, effective mitigation of locking without additional treatment, and robust performance for beams with non-uniform cross-sections and spatially varying curvature.

0.23

An FE2 model for shear-deformable beams considering periodic lattice-like truss mesostructures

cs.CE ·2026-10-06 ·Julian Ochs, Jens Wackerfuß
similarity 0.52
Abstract · 37 pages, 21 figures, 10 tables, 66 references

The increasing use of lattice-like architectures in load-bearing members, facilitated by advances in additive manufacturing, calls for efficient multiscale approaches to their structural analysis. For slender lattice-like structures, beam models provide a computationally efficient macroscopic representation while retaining the ability to account for the underlying lattice architecture through an homogenization approach. Although finite element squared (FE2) approaches combining beam models at the macroscopic scale with continuum models at the microscopic scale have been established, an FE2 framework combining a beam-based macroscopic model with a truss-based microscopic model of a lattice structure has not yet been reported. To address this gap, an FE2 framework is developed for three-dimensional shear-deformable beams with periodically repeated lattice-like microstructures and periodic displacement boundary conditions. The proposed FE2 framework introduces constraint equations that (a) prevent rigid-body translations and rotations of the representative volume element (RVE) without imposing additional kinematic restrictions and (b) ensure that the homogenized stress resultants and material matrix are independent of the selected RVE length. To mitigate artificial boundary effects arising at the boundaries of the lattice-like RVE, local correction factors are introduced. The framework is assessed through numerical studies of two- and three-dimensional lattice-like structures with different geometries, considering both geometric and material linearity and nonlinearity. The results demonstrate the independence of the homogenized stress resultants and material matrix from the selected RVE length and show good agreement with the corresponding reference models in all investigated cases.

0.28

Flexible-body Modeling, Kinematic Identification, and Assembly Accuracy of Overconstrained Spatial Linkages

cs.RO math.AG ·2026-09-15 ·Daniel Huczala, Michael Pieber, Johannes Gerstmayr, Andreas Mair, Frederik Schulte +4 more
similarity 0.49
Abstract

Overconstrained rational single-loop linkages are efficient, compact, and low-cost custom mechanisms, yet their deployment in industrial settings is limited. In simulations, rigid body formulations fail due to redundant constraints. This study presents a flexible multibody modeling framework based on the floating frame of reference formulation, and delivers an overall accuracy analysis of assembled linkages prototypes. The approach is validated against 3D-printed PLA prototypes of a Bennett four-bar mechanism, including variants with intentional joint-axis misalignment, which theoretically, from the rigid body point of view, cannot be assembled. A supplementary contribution is delivered in the form of a kinematic parameter identification methodology suited for this type of mechanism with ill-conditioned Jacobian. The experimental and simulation results are compared and reveal that these overconstrained mechanisms exhibit a self-assembling tendency -- structural compliance drives the assembly toward the ideal geometric configuration, distributing constraint stress throughout the structure. Additional qualitative demonstrations using cardboard tubes and bamboo sticks as link building blocks confirm that functional mechanisms can be realized from low-cost, unconventional materials with limited manufacturing accuracy. The proposed modeling pipeline is fully algorithmic and enables design optimization in the future.

0.18

Cosserat Modeling of Trimmed Helicoid Soft Arms with a Separated-Section Constitutive Law

cs.RO ·2026-09-21 ·Zhihang Qin, Linxin Hou, Zeyu Zhong, Yuchen Sun, Wenci Xin +8 more
similarity 0.47
Abstract

Cosserat rod models for soft robots usually construct sectional stiffness by summing material properties over a common cross-section. This assumption becomes inaccurate for trimmed helicoid arms, where load-bearing helix domains are separated and connected only through sparse fused crossings. This paper formulates a separated-section constitutive law that evaluates each helix domain in its local frame and pulls its constitutive response back to the backbone, yielding an effective backbone stiffness. Sparse-fusion mechanics captures the additional compliance caused by relative motion between neighboring domains and determines channel-wise reduction profiles $η_c(s/L)$ for bending, torsion, and extension. The resulting effective sectional stiffness is strongly anisotropic: bending and extension are reduced by about one order of magnitude, whereas torsion remains close to the effective backbone stiffness. The resulting sectional law is embedded in a geometrically exact dynamic Cosserat model with GVS discretization and routed-tendon actuation. Across 103 measured configurations, the three datasets give pooled normalized position errors of $7.7 \ \%$, $6.7 \ \%$, and $7.8 \ \%$, while each full-arm solve requires approximately $0.3 \ \mathrm{s}$ on one CPU core (Intel Xeon, Cascade Lake, $2.8 \mathrm{GHz}$), enabling rapid model-based planning, state and load estimation, and morphology--control co-design for architected soft robots.

0.38

Rapid Kirigami Simulation using the Bar & Hinge Approach

cs.CE cond-mat.other ·2026-08-13 ·Raj Pradip Khawale, Elaheh Mehdizadeh, John Brigham, Evgueni T. Filipov
published similarity 0.47
Abstract · 23 pages, 11 figures, journal paper

Kirigami, the art of cutting sheets, offers unique characteristics such as shape morphing, stretchability, and adaptability, with applications in deployable and reconfigurable structures. While Finite Element (FE) approaches are widely used to analyze kirigami structures, they are computationally intensive and prone to convergence issues. On the other hand, existing simplified and theoretical models for evaluating kirigami are typically restricted to specific designs and analytical scenarios. This paper proposes a generalized, computationally efficient reduced-order model based on the bar and hinge approach for analyzing any kirigami system. The model represents the entire kirigami structure using truss bars, bending hinges, and torsional springs, capturing both the deformation and internal forces of the system. We derive stiffness expressions for kirigami structures that experience stretching and out-of-plane bending deformations, as well as for structures that experience only in-plane stretching and rotations. The accuracy and robustness of the model are validated through comparisons with FE analysis and experimental data on both single-cut kirigami designs and more complex designs with multiple cuts. Our results demonstrate less than 5% difference in deformation predictions and achieve at least a tenfold computational speedup compared to FE simulations. Additionally, we demonstrate the model's capabilities through simulating complex scenarios, including kirigami-skinned crawlers, high-throughput property-space exploration, and in-plane kirigami-inspired metamaterials. These examples demonstrate computational capabilities that enable large-deformation structural simulations and high-throughput design exploration beyond the practical limits of conventional FE methods.

0.27

Design and Experimental Validation of a 3D Printed Torsional Series Elastic Actuator for Safe Human Robot Interaction

cs.RO ·2026-09-16 ·Joel Hidalgo Pisco, Melissa Cobos Condo, Luigi Miranda, Dennys Paillacho
published similarity 0.46
Abstract

Ensuring intrinsic safety in physical human robot interaction (pHRI) is a critical requirement for social and service robots. While Series Elastic Actuators (SEAs) offer hardware based compliance, traditional metallic designs often require complex, multi part assemblies. This paper presents the design, finite element analysis (FEA), and experimental validation of a low stiffness, torsional spring for SEAs, manufactured via 3D printed thermoplastic polyurethane (TPU). The compliant element exhibits a highly linear torque deformation response (Ks = 0.066 Nm/degree), matching numerical predictions with under 3% deviation, a variance attributed to FDM structural anisotropy. To accommodate external interactions using standard position limited servomotors, a hybrid position controller with torque threshold switching was implemented. Experimental evaluations demonstrate the system ability to accurately track non stationary trajectories and safely yield to external disturbances. Furthermore, the inherent material damping of the TPU acts as a passive low pass filter, preventing high frequency oscillations during control mode transitions. The proposed architecture offers a cost effective, reliable, and easily manufacturable solution for safe pHRI.

0.32