CS Paper Radar

UACS: Uncertainty-Aware Clustering and Sparse Parameter Estimation for Multi-Condition Wheel Center Force

Le Wang, Mian Li

eess.SY ·submitted 2026-11-14 16:06 UTC · v1

Abstract

Accurate wheel center force (WCF) estimation is important for vehicle durability analysis and condition monitoring, whereas direct measurement requires dedicated transducers and increases instrumentation cost and complexity. As a result, soft sensors have attracted considerable attention as a practical alternative. However, developing reliable soft sensors remains challenging due to varying working conditions, unknown condition relationships, and high-dimensional model representations. This paper proposes an uncertainty-aware clustering and sparse parameter estimation framework (UACS) for WCF signal estimation under diverse and unlabeled working conditions. A MISO-FIR model is first constructed using easily accessible sensor signals to estimate the unmeasurable force signal. The uncertainty of estimated parameters is quantified through confidence ellipsoids, and pairwise hypothesis testing is developed to identify statistically similar working conditions. Based on these uncertainty-aware comparisons, working conditions are grouped in an unsupervised manner, and sparse parameter estimation is performed within each cluster. The UACS framework simultaneously reduces the number of required models and active parameters while maintaining estimation accuracy. Experiments using real-world vehicle data demonstrate that the UACS framework achieves estimation accuracy comparable to condition-specific models while substantially reducing the number of required models and outperforming conventional distance-based clustering approaches.

Closest papers

Nearest neighbours by meaning across the whole index.

3D-Force Estimation for Dual-arm Manipulation of Deformable Linear Objects via Factor Graphs

cs.RO ·2026-10-26 ·Annika Delucchi, Vincenzo Di Paola, Bruno Marco Quadrelli, Matteo Zoppi
similarity 0.56
Abstract

Estimating forces acting on Deformable Linear Objects (DLOs) is challenging due to their underactuated nature. However, reliable contact estimation is crucial to precisely control them and enable safe manipulation tasks. Differently from the various approaches presented in the literature, this work adopts a probabilistic formulation where the DLO state and sensor data are related through conditional distributions. In particular, factor graphs are used to determine the magnitude, direction, and location of a 3D force acting on a DLO, while simultaneously reconstructing its shape. Since DLOs are not actuated and are typically thin, like cables and wires, strain gauges and actuation readings are usually impractical. Therefore, to overcome this issue, this work is tested using one type of sensing information only, thus developing a generic technique suited for a wider variety of tasks. Realistic tests are performed by introducing noise into the measurements while the DLO follows a prescribed path in the presence of external forces that are accurately estimated.

0.33

A Vehicle-Integrated Approach to Digital Twin Deployment for Bridges

eess.SP ·2026-09-25 ·Mehri Alamdari, Zihao Liu, Jiaji Wang, Kawabe Daigo, Chul Woo Kim
benchmark similarity 0.52
Abstract

The project A Vehicle Integrated Approach to Digital Twin Deployment for Bridges is developing a scalable framework for bridge condition assessment using vibration measurements from a sensorised inspection vehicle. It combines vehicle bridge interaction modelling, state estimation, machine learning and surrogate modelling to reduce reliance on permanent sensor networks. The Old Ada Bridge in Japan is the principal case study because it provides direct and vehicle-based field measurements across multiple experimentally introduced damage states. Progress has been made across three streams. First, forward and inverse Fourier Neural Operator (FNO) models have been demonstrated on a benchmark beam, enabling rapid response prediction and identification of damage location and severity. Second, an inspection vehicle optimisation framework has been developed to select vehicle mass and tyre suspension stiffness that maximise separation between healthy and damaged responses, integrating contact-point reconstruction, damage assessment, Kriging and particle swarm optimisation. Third, an Augmented Kalman Filter-based virtual sensing framework has been developed to estimate moving loads and reconstruct displacement, velocity and acceleration at unmeasured locations from sparse sensors. The next phase will extend and integrate these methods using the Old Ada Bridge model and field data. FNO models will be transferred to the truss structure and evaluated using intact and damaged measurements. Vehicle optimisation will be tested for transferability, while virtual sensing will be extended to the coupled vehicle bridge system to estimate road roughness, vehicle parameters, moving forces and structural responses. Ultimately, these components will form an integrated vehicle-driven digital twin for rapid simulation, response reconstruction and damage assessment under realistic conditions.

0.28

A Lightweight Hybrid Approach for Milling Force Reconstruction from Internal Machine Signals

cs.LG ·2026-11-19 ·Eric Hirsch, Christian Friedrich
unusual similarity 0.49
Abstract · Author-prepared preprint. 7 pages, 4 figures, 5 tables

Data-driven monitoring based on milling force can enable advanced manufacturing services including process optimization and condition monitoring. However, industrial implementation is often hindered by costly and intrusive hardware and large training data requirements. This paper therefore presents a hybrid approach using machine-internal signals and machining metadata to enable force-based monitoring on brownfield machines without additional sensors. Commonly available machine signals have relatively low sampling rates and cannot directly represent high-frequency milling-force variations, especially at higher spindle speeds. Instead of learning the complete force signal, which would increase model complexity, data requirements, and overfitting risk, a supervised machine-learning model predicts only the average milling force from selected machine-signal features and machining parameters. This low-frequency estimation parameterizes a static milling force model that reconstructs the force behavior over one spindle revolution. Although the static model does not reproduce all dynamic effects, it captures the force distribution, load levels, and angular regions of highest tool engagement. The approach is evaluated on one milling machine across varying process parameters, engagement conditions, cutting tools, and two workpiece materials. Dynamometer measurements are required only for development and validation. Ridge regression achieves an $R^2$ of $0.984$ and $0.991$ for average-force prediction on the test data ($\bar{F}_x$ and $\bar{F}_y$). The reconstructed force behavior over one spindle revolution achieves an $R^2$ of $0.962$ and $0.982$ ($F_x$ and $F_y$) compared with the reconstruction based on measured force features. The method provides a cost and computationally efficient basis for process monitoring, tool condition assessment, and process optimization on existing machines.

0.30

Reliable Piezoresistive Strain Sensing Through Physical Limits and Uncertainty Monitoring

cs.RO ·2026-08-16 ·Carmen Ballester, Víctor Muñoz, Dorin Copaci, Dolores Blanco
similarity 0.48
Abstract

Soft piezoresistive strain sensors are one of the most common sensing solutions for wearable and soft robotic applications due to their flexibility and compliance. However, their resistance response is nonlinear and hysteretic, and a sensor can be pushed past its calibrated workspace or misbehave inside it, carrying that error into a decision or control loop. Probabilistic regressors track confidence but ignore those limits. A predictive mean can look unremarkable even when the reading comes from a sensor outside its admissible range or already failing internally, so a confident-looking estimate is not the same as a trustworthy one. This paper proposes a reliability framework pairing a physics-informed probabilistic inverse model, built on physics-guided input features, with a risk factor fusing uncertainty with strain and strain-rate limits into a three-state monitor. Tests on a Nitinol wire and a silver-coated polyamide thread with a Gaussian Process raised fit scores to 0.90-0.95 (RMSE 0.26%-0.15%) and a 96% empirical coverage against the 95% target. The monitor caught 95% of out-of-range and 100% of abnormal conditions while staying reliable under nominal operation. A sensor that reports confidence alongside its estimate lets a system withhold action instead, since it needs no labeled failure examples, which are hard to collect for soft materials.

0.04

Hidden Markov Model-Based Remaining Useful Life Estimation of Rolling Bearings Using Vibration Signals: A feasibility study

eess.SP ·2026-09-23 ·Ioannis Ksoulos, Dimitrios M. Bourdalos, John S. Sakellariou, Sonia Malefaki
top venue similarity 0.46
Abstract · 14 pages, 10 figures. Accepted for publication in the Proceedings of the 10th International Conference on Risk Analysis (ICRA10), Patras, Gr…

This feasibility study presents a Hidden Markov Model (HMM)-based methodology for the Remaining Useful Life (RUL) estimation of rolling element bearings when the training vibration signals differ significantly from those of the target bearing. An AutoRegressive (AR) model is first employed to capture the machinery dynamics using vibration acceleration measurements from an initial operating period where all components including the considered bearing are still under healthy condition. The AR model is subsequently used to filter a newly acquired vibration signal from the faulty machinery, and typical Envelope Analysis is performed on the residual signal to identify fault-related repetition frequencies. The amplitudes of these frequencies, combined with statistical features of the AR residuals are fused through Principal Component Analysis to construct a sensitive to bearing degradation Condition Indicator (CI). Based on training data from the healthy state, a threshold is established, and a fault is declared when the CI exceeds this threshold. Once a fault is detected, its progression is modelled as a sequence of consecutive, distinct states, which are identified using K-Means clustering. A left-right HMM with continuous observation densities is estimated to represent the fault progression and thus predict the RUL. The HMM-based RUL estimation methodology is trained using vibration measurements from a limited number of two run-to-failure experiments with two nominally identical bearings, while RUL estimation performance is assessed on a third bearing of the same type. Despite the significant differences between the vibration data used for training and the life cycles of the training bearings with respect to the target bearing, the RUL estimation results indicate an adequate but conservative performance of the postulated HMM-based methodology.

0.49

Scalable Identification of Physics-Based and Neural Dynamics from Partial Measurements

eess.SY cs.LGmath.OC ·2026-10-12 ·Yibo Zhou, Johannes Köhler
code/data similarity 0.46
Abstract · The code is available at https://github.com/YiboFrankZhou/Scalable-PEM-MHE

We present a scalable method for identifying nonlinear dynamics from partial measurements, supporting physics-based, neural-network, and gray-box models. We use the Prediction Error Method (PEM) coupled with state estimation performed by a Moving Horizon Estimation (MHE) scheme, which can account directly for general nonlinear dynamics. This results in a bi-level optimization problem that scales poorly with increasing model parameters. To improve computational efficiency, we derive a reformulation that avoids explicit parameter-wide sensitivity matrices and exploits the temporal structure of the underlying optimization problem. Numerical comparisons show up to a $215\times$ speedup in hypergradient evaluation. Racing-vehicle simulations demonstrate accurate prediction and physical-parameter recovery in tire-force identification. Real-world data show that the gray-box model improves prediction accuracy with a neural residual while retaining physical interpretability.

0.47

Proprioceptive Finger Force Estimation for Reliable Box Manipulation

cs.RO ·2026-10-28 ·Junha Cha, Chanwoo Kim, Kisang Park, Yeoncheol Jang, Doyoung Kim +3 more
code/data similarity 0.46
Abstract · Project page: https://finger-force-estimation.pages.dev/

Reliable box manipulation requires successful placement without damage, which depends on maintaining sufficient contact force without excessive loading. We hypothesize that per-finger force feedback improves manipulation reliability relative to open-loop finger commands. To this end, we present Finger External-Force Estimation from Proprioceptive SignaLs (FEEL), an uncertainty-aware residual method that estimates per-finger external force magnitude from proprioceptive histories. Our method combines a calibrated virtual-spring estimate with a residual distribution predicted by a Mixture Density Network (MDN) and requires no dedicated contact sensors during deployment. The estimated force is used for continuous per-finger adaptation, while predictive uncertainty is evaluated as an empirical signal of ambiguity in proprioceptive force estimation. Across ten fingers and contact forces spanning 0-20 N, our method achieves a mean RMSE of 0.251 N, reducing the error by 92.8% relative to the virtual spring and by 9.4% relative to an end-to-end MDN. In box pick-and-place, force adaptation maintains task success at 10/10 and increases both damage-free outcomes and reliability from 7/10 to 10/10. The project page is available at https://finger-force-estimation.pages.dev/

0.35

Sensitivity-Orthogonal Residual Learning for Adaptive Sideslip and Cornering Stiffness Estimation

cs.RO cs.LGeess.SY ·2026-10-20 ·Kyoungtae Ji, Dongyeol Won, Kyoungseok Han
similarity 0.46
Abstract · 25 pages, 15 figures, 5 tables. Submitted to Vehicle System Dynamics

Online adaptation of the cornering stiffness keeps a model-based sideslip estimator valid as tires change, but competes with learned model correction for the same filter innovation. A corrector with enough parameters can absorb the innovation pattern that a stiffness change produces, and adaptation is suppressed while the fit improves. We propagate the stiffness sensitivities of the predicted measurements through the vehicle states and construct a corrector orthogonal to them. A null-space parameterization enforces the constraint without a penalty coefficient and preserves the static least-squares stiffness estimate on each identification segment. In full-vehicle simulation, the stiffness response of the unconstrained corrector declines as its parameter count grows, whereas the orthogonal corrector responds at least as fully as the uncorrected filter at all sizes and lowers sideslip error by 12.7% to 22.0%. In a simulated drive with a stiffness step, the orthogonal corrector adapts as quickly as the uncorrected filter and lowers sideslip error during and after the transient. On public real-vehicle data, the 430-parameter unconstrained corrector loses most of its response to deliberate offsets of the filter's nominal stiffness, whereas the orthogonal corrector of the same size retains most of it, with a sideslip error slightly above the uncorrected filter's.

0.28