CS Paper Radar

Dual-Actuation Emulation of Scaled Relative Orbital Dynamics on a Free-Flyer

Elias Krantz, Pedro Roque, Gunnar Tibert, Huina Mao, Christer Fuglesang

cs.RO ·submitted 2026-11-18 10:15 UTC · v1
publishedcode/data

Abstract

Ground-based free-flyer testbeds reproduce the planar motion of a free-floating spacecraft using air bearings, but not the relative dynamics of spacecraft in orbit. We present a dual-actuation architecture that physically emulates Clohessy-Wiltshire dynamics on an open-source free-flyer. Two model predictive controllers run in parallel: one drives the solenoid thrusters with an orbital dynamics model, representing the spacecraft under test; the other drives bidirectional propellers that physically apply the orbital accelerations, continuously updating its reference to account for thruster-induced velocity changes. A dynamic similitude maps the orbital scenario onto the limited floor area and actuation rates of the testbed, letting the spacecraft controller run directly at orbital scale. We validate the architecture on hardware and against a high-fidelity orbital simulation, where the orbital accelerations instead arise naturally, both driven by the identical spacecraft controller. Their agreement indicates that the testbed reproduces the relative orbital motion the controller would encounter in flight.

Comment
7 pages, 4 figures. Presented at the 2026 IEEE International Conference on Space Robotics (iSpaRo); to appear in IEEE Xplore

Closest papers

Nearest neighbours by meaning across the whole index.

PINGU: Extending Air-Bearing Spacecraft Emulators with Open-Source Actuators and Learned Control for Contact-Rich Proximity Operations

cs.RO ·2026-09-20 ·Ricard Marsal I Castan, Akiyoshi Uchida, Aman Arora, Pedro Lima, Matteo El-Hariry +5 more
benchmarkcode/data similarity 0.61
Abstract

Low-cost planar air-bearing testbeds have matured into a standard proxy for free-flying spacecraft GNC, but they remain largely thruster-only and are rarely equipped for contact-rich, inertia-coupled manipulation. Building on the open-source ATMOS testbed, we contribute a reaction wheel and two force/torque-sensed robotic arms (LEVION) with interchangeable end-effectors, integrated as first-class control actuators through a unified ROS 2 abstraction layer. On top of the software stack we build a reinforcement-learning training environment and digital twin, and a controller that exploits these added degrees of freedom, letting classical optimal controllers and learned policies be swapped on the same hardware without modification. We validate the integrated system, PINGU, across four benchmark tasks: point-to-pose navigation (classical LQR vs. sim-to-real PPO), dynamic disturbance rejection under arm-induced center-of-mass shifts, reaction-wheel momentum stabilization, and force-controlled docking. The results show that these additions extend an ATMOS-class emulator into the contact-rich regime and bridge classical optimal control and reinforcement learning on one reproducible platform.

0.28

mjorbit: A Simulation Framework for Space Robotics

cs.RO ·2026-09-07 ·John Z. Zhang, Joris Verhagen, Fausto Vega, Patrick McKeen, Zachary Manchester
publishedcode/data similarity 0.56
Abstract · accepted to ISPARO 2026

This paper presents a general framework for simulating multi-body space robots with contact. We bring efficient, large-scale robot simulation to in-space servicing, assembly, and manufacturing applications. First, we perform an empirical trade study of methods for coupling orbit propagation with existing robotics simulation frameworks. Next, we present mjorbit, a general, flexible, and performant framework built on the MuJoCo engine widely used in robotics, to which we add key spacecraft dynamics, actuators, and sensors. We provide a low-latency C++ CPU backend and a high-throughput GPU backend behind a simple Python API. We demonstrate mjorbit by solving several realistic on-orbit case studies with both model-predictive control and reinforcement learning. Open-source code and examples are available at: https://johnzhang3.github.io/mjorbit/

0.48

Trajectory Inversion for a Rudderless Dual Vectored-Thrust Flying Wing

cs.RO ·2026-11-07 ·Weicheng Di, Qiqi Liu, Jinwu Xiang, Daochun Li, Zhan Tu
similarity 0.53
Abstract

A rudderless dual vectored-thrust flying wing combines vertical takeoff and landing with efficient for- ward flight in a compact tailless configuration. Without aerodynamic control surfaces, vectored thrust couples translation and pitch control. Therefore, generating dy- namically compatible trajectories remains an open chal- lenge. To address this challenge, this study proposes a trajectory generation method that jointly optimizes path geometry and timing. Trajectory inversion yields state and control histories that satisfy the coupled equations of motion. The optimization balances curvature-induced acceleration against aerodynamic support, lowering thrust- vectoring demand while retaining the defining maneuver features. Representative looping and rolling sequences are tracked in closed-loop simulations. These results provide a basis for planning autonomous aerobatic maneuvers with rudderless vectored-thrust aircraft.

0.31

Efficient Bezier Velocity Optimization for Free-Floating Space Manipulators

cs.RO ·2026-09-25 ·Duo Zhang, Zhizhuo Zhang, Xiaoli Bai, Jingjin Yu
similarity 0.53
Abstract

We present FAVOR (Free-floating Arm Velocity Optimization with Recursive Sensitivities), a planner for collision-free reaching, tracking, and prescribed-time pre-grasp interception on an unactuated spacecraft. It optimizes Bezier joint-velocity curves with linear velocity, acceleration, and continuity constraints. Decision dimension is independent of rollout resolution. Analytical recursive sensitivities provide task and clearance gradients through the coupled base-arm motion. Parallel evaluation, caching, and incremental collision discovery reduce computation. With a seven-DoF arm and five simulated spacecraft models, FAVOR achieves 99.8% point-to-point success with 1.779 s mean computation, versus 62.9% and 50.270 s for an IK-initialized position-spline baseline. Means include failures and timeouts. FAVOR completes 30 of 36 tracking cases, versus 15 for single-step QP, and all 36 interception instances, versus 22 for the spline baseline. A controlled ablation shows that finite differences increase mean planning time 4.7-fold.

0.23

Real-Time Dynamics-Based Torque-Sampling MPPI for Compliant and Force Aware Manipulation

cs.RO ·2026-09-02 ·Euncheol Im, Taehyun Kim, Yonghwan Oh, Myotaeg Lim, Yisoo Lee
published similarity 0.51
Abstract · 8 pages, 6 figures. Accepted to the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2026)

This study proposes a novel Model Predictive Path Integral (MPPI)-based task-space control framework. The proposed framework explicitly solves rigid-body dynamics within a real-time MPC formulation and enforces safety constraints, enabling accurate motion and force control that yields compliant behaviors for safe and effective physical interaction of robotic manipulators in unstructured environments. By leveraging MPPI, the proposed framework efficiently handles nonlinear dynamics that are difficult to solve with conventional MPC approaches in real-time. Furthermore, we develop a torque-sampling-based control architecture that enables efficient exploitation of GPU-based parallelization, resulting in effective compliant and force-aware behaviors. As a result, the proposed framework achieves a solver update rate of over 166 Hz with a 0.18 s prediction horizon, and its performance is validated through real-world experiments on a 7-DoF manipulator.

0.38

Two-impulse Rendezvous Planning about Thrusting Spacecraft on SE2(3)

eess.SY ·2026-09-23 ·Micah Condie, Abigaile Woodbury, James Goppert
hot direction similarity 0.51
Abstract

The classical Hill--Clohessy--Wiltshire equations assume an unforced Keplerian reference trajectory, an assumption that is violated by missions requiring continuous thrust. We formulate spacecraft relative motion on the $\mathrm{SE}_2(3)$ Lie group, which encodes position, velocity, and attitude in a single geometric state, linearize the gravity and body-frame control mismatches between the two vehicles, and derive analytic bounds on every neglected term. Under circular coasting Keplerian assumptions the framework recovers the Hill--Clohessy--Wiltshire equations exactly. For thrusting references the state transition matrix acquires thrust-induced attitude--translation coupling blocks that, when the two vehicles share body-frame inputs, are exact in log coordinates and independent of the attitude error, and a mismatch between the vehicles' inputs re-centers the linearization at their mean. A two-impulse rendezvous planner follows directly. A scalar coupling ratio, computable before planning, separates two regimes. Where it exceeds unity, the planner reduces the terminal error of coupling-blind planners by more than an order of magnitude, and somewhat above unity it is also more accurate than a Cartesian planner of the same computational structure; well below unity, simpler planners are adequate or better. Simulations confirm the recovery to machine precision and validate every bound along the transfer.

0.33

From Model to Prototype: Design and Motor-Flap Propulsion Control of a Twin-Wing Metamorphic UAV

cs.RO ·2026-10-06 ·Anja Bosak, Dorian Erić, Ana Milas, Stjepan Bogdan
similarity 0.51
Abstract · 8 pages, 12 figures

This paper presents the design and control strategy for MetaMorpher, a metamorphic Unmanned Aerial Vehicle (UAV), capable of both spinning-wing hover and fixed flying-wing cruise flight. Since control of the cruise configuration is comparatively well established in the literature, this paper focuses on control of the MetaMorpher in hover mode, building on the flight dynamics model and conceptual design validated in previous work. The control algorithm is implemented using one of two phase-synchronized strategies: motor propulsion, which pulses motor thrust in synchrony with the vehicle's rotation, or flap propulsion, a novel strategy that pulses the deflection of the wing-mounted elevons. We evaluate both strategies in simulation through different flight experiments. Simulation results confirm the mathematical model and show stable reference tracking, demonstrating flap propulsion as a lightweight, decoupled alternative for hover control. Experimental testing validated the vertical-dynamics propulsion model against the physical prototype, demonstrating very good steady-state agreement across different configurations.

0.22

Dynamic System Emulation: Fixed Wing Dynamics on a Multicopter

eess.SY cs.RO ·2026-09-06 ·Abdelhakim Amer, Andriy Sarabakha
similarity 0.51
Abstract · 7 pages, 6 figures

This work presents a control framework that enables a multicopter equipped with a two-axis gimbal to emulate the flight dynamics of a fixed-wing aircraft. The goal is to provide an operationally simple platform for training and simulation that avoids the aerodynamic constraints of fixed-wing vehicles, such as minimum airspeed and nonholonomic constraints. A state-input mapping between the two platforms is derived using dynamic feedback linearization. The framework is evaluated on representative fixed-wing manoeuvres. Results show high-fidelity emulation under nominal conditions. While evaluations are conducted in simulation, the approach establishes a practical path toward hardware deployment for pilot training, autonomy research, and controller benchmarking.

0.27