CS Paper Radar

Wideband MIMO Beampattern Synthesis using Adaptive Frequency Modulated Waveforms

David A. Hague

eess.SP ·submitted 2026-08-20 16:11 UTC · v1
published

Abstract

Multiple-Input Multiple-Output (MIMO) arrays transmit unique waveforms on each of their elements increasing the degrees of freedom available to synthesize novel transmit beampatterns. The wideband MIMO beampattern shape is determined by the structure of the MIMO Cross Spectral Density Matrix (CSDM) whose elements are the cross-spectra between each waveform in the set as a function of frequency. This paper demonstrates a model for synthesizing wideband MIMO beampatterns using Multi-Tone Sinusoidal Frequency Modulated (MTSFM) waveform sets. The MTSFM waveform's instantaneous phase is a finite Fourier series. The Fourier coefficients are modified to synthesize constant modulus and spectrally compact waveforms whose CSDM closely approximates a desired wideband MIMO transmit beampattern. An optimization routine is formulated that synthesizes MTSFM waveform sets that possess the necessary CSDM structure and is demonstrated using an illustrative design example.

Comment
Accepted for publication at 2026 EUSIPCO Conference

Closest papers

Nearest neighbours by meaning across the whole index.

Waveform Design for Simultaneous MIMO Radar Sensing and Multi-User Communication

eess.SP ·2026-08-23 ·Berkan Kilic, Kenan Turbic, Slawomir Stanczak
publishedhighly cited similarity 0.59
Abstract

This paper proposes a novel two-stage joint waveform design framework for multi-antenna Integrated Sensing and Communication (ISAC) systems that simultaneously enable Multiple-Input Multiple-Output (MIMO) radar sensing and Multi-User MIMO communication. First, a transmit waveform covariance matrix is designed by solving a convex matrix nearness problem for beampattern synthesis that simultaneously maximizes transmit power in desired directions and minimizes cross-directional correlations, while accommodating independent antenna power constraints and supporting interference suppression through radiation null steering. Second, a waveform conforming to the designed covariance is synthesized while additionally enforcing inter-user interference suppression via the zero-forcing approach and imposing practical implementation constraints, notably limiting the peak-to-average-power-ratio on the individual antenna elements. Simulation results demonstrate that the approach significantly enhances ISAC waveform design flexibility, performance, and computational efficiency compared to the alternative methods in the literature.

0.58

Frequency-Dependent Hybrid Digital and Microwave Linear Analog Computer (MiLAC) Beamforming for Multiuser MIMO-OFDM Systems

eess.SP ·2026-10-25 ·Yiyang Peng, Zheyu Wu, Bruno Clerckx
similarity 0.58
Abstract

Microwave linear analog computing (MiLAC) has recently emerged as a promising approach for reducing the hardware and digital-processing requirements of large-scale multiple-input multiple-output (MIMO) systems. In narrowband multiuser systems, hybrid digital-MiLAC beamforming can achieve digital beamforming flexibility with only as many radio-frequency (RF) chains as data streams. However, extending this advantage to wideband systems is nontrivial because practical MiLAC circuits exhibit frequency-dependent responses. In this paper, we investigate hybrid digital-MiLAC beamforming for multiuser MISO-OFDM systems with a frequency-dependent MiLAC circuit model. We characterize the frequency dependence of MiLAC by relating the susceptance of each tunable component across subcarriers to its center-frequency value. Under this frequency coupling, we show that a single MiLAC circuit generally cannot simultaneously match the desired beamforming directions across all subcarriers, highlighting the essential role of subcarrier-dependent digital precoding. We then develop a block coordinate descent (BCD) algorithm to jointly optimize the digital and MiLAC beamformers for average sum-rate maximization. In particular, an efficient alternating direction method of multipliers (ADMM) algorithm is custom-designed to handle the frequency-coupled circuit constraints in the MiLAC beamformer subproblem. Simulation results show that the proposed hybrid digital-MiLAC design outperforms conventional hybrid digital-analog beamforming, particularly when fewer RF chains are available and the channel is more frequency-selective. With $64$ transmit antennas and $4$ data streams, it attains $96.3\%$ of the digital sum-rate using only $8$ RF chains. Furthermore, under highly frequency-selective channels and using $4$ RF chains, it provides a $48\%$ sum-rate gain over the conventional hybrid design.

0.39

Low-PAPR Rank-2 DFT-s-OFDM Waveform for 6G Uplink

eess.SP cs.IT ·2026-10-31 ·Yewen Cao, Fen Hou, Yulin Shao
similarity 0.57
Abstract

Rank-2 discrete Fourier transform-spread orthogonal frequency-division multiplexing (DFT-s-OFDM) is attracting renewed interest for 6G uplink, offering not only spatial multiplexing gains but also an additional degree of freedom for peak-to-average power ratio (PAPR) reduction. We exploit this freedom by selectively exchanging constellation symbols between the two layers before DFT spreading, preserving the transmitted information while reshaping the resulting waveforms. Building on this idea, we propose Cyclic Layer Assignment with Shared-basis Synthesis (CLASS). CLASS employs carefully designed cyclic assignment patterns to generate diverse waveform candidates, while reusing a small number of waveform components to avoid synthesizing each candidate separately. We further establish the optimality of the cyclic design in maximizing waveform diversity under a minimum-basis constraint when equal group sizes are feasible. With only six inverse DFTs, CLASS explores 16 assignments and reduces the 99th-percentile worst-layer PAPR by 1.41 dB relative to fixed assignment, outperforming representative selected mapping (SLM) and partial transmit sequences (PTS) schemes under the same synthesis budget.

0.31

Precision Coexistence: Angular-Spectral Region Constrained Waveform Design for MIMO-ISAC

cs.IT ·2026-10-21 ·Syed Ali Haider Shirazi, Taejoon Kim, David J. Love, Sergiy A. Vorobyov
published similarity 0.56
Abstract · Paper accepted for presentation at IEEE Conference on Integrated Sensing and Communications 2026

In this paper, we develop a dual-function waveform design framework for multiple-input multiple-output integrated sensing and communication (MIMO-ISAC) systems operating in congested electromagnetic environments. In such environments, the dual-function waveform must coexist with legacy systems, such as localized positioning sensors, maritime radar networks, and satellite communication links, that occupy specific frequency bands and angular sectors. To enable precision coexistence, we incorporate localized angular-spectral region constraints that suppress beamformed energy only within the angle-frequency regions occupied by each legacy system, while preserving the spatial degrees of freedom (DoFs) available outside those regions. The resulting waveform design problem is formulated as a nonconvex optimization problem and solved using a low-complexity majorization--minimization alternating direction method of multipliers (MM--ADMM) algorithm. Simulation results demonstrate that the proposed framework provides precise legacy-system protection while maintaining robust radar sensing and multi-user communication performance.

0.16

Two-Layer Microwave Linear Analog Computer (MiLAC)-Aided Multi-User MIMO Networks

eess.SP ·2026-10-28 ·Xiaohua Zhou, Tianyu Fang, Matteo Nerini, Yijie Mao, Bruno Clerckx
theory similarity 0.56
Abstract

Microwave linear analog computer (MiLAC)-aided beamforming, which performs signal processing directly in the analog domain, has recently emerged as a promising alternative to fully digital and hybrid beamforming for multi-antenna systems. However, existing studies have shown that a single lossless and reciprocal MiLAC at the transmitter cannot, in general, attain the performance of fully digital beamforming in multi-user scenarios. To overcome this limitation, we propose a two-layer MiLAC-aided transmit beamforming architecture for downlink multi-user multiple-input multiple-output (MIMO) networks. Leveraging multiport microwave network theory, we first establish a general physics-compliant model of the proposed architecture, and then derive a simplified model under the assumptions of unilateral and perfectly matched amplifiers. We prove that, with lossless and reciprocal MiLACs, the two-layer MiLAC-aided transmitter can realize any fully digital transmit beamformer, while a single-layer MiLAC-aided receiver can attain the same achievable rate as a fully digital linear combiner. We then derive closed-form mappings from fully digital transmit beamformers and receive combiners to their corresponding MiLAC-aided analog implementations. Based on these equivalence results, we formulate a sum-rate maximization problem for the considered multi-user MIMO network and develop an optimization framework for jointly designing the power allocation and scattering matrices of the MiLAC-aided transceivers. Numerical results validate the theoretical analysis and show that the proposed two-layer MiLAC-aided design attains the same sum-rate performance as its fully digital counterpart.

0.21

Flexible Beamforming via Fluid Antenna Array: From Discrete to Continuous Array

cs.IT ·2026-10-25 ·Jingyuan Xu, Yuanhui Wu, Zhentian Zhang, Zaichen Zhang, Tuo Wu +4 more
similarity 0.55
Abstract · 12 pages, 9 figures. Submitted to IEEE Transactions on Wireless Communications

Fluid antenna arrays (FAAs) reconfigure their effective aperture by activating radiation ports from a dense set of candidate positions within a finite physical region, thereby offering geometry diversity beyond conventional fixed arrays. This paper studies arbitrary-direction far-field beam synthesis with a planar FAA. Since a fixed array adapts its beamforming weights on a predetermined spatial sampling structure, its ability to match desired beam patterns is limited when both the aperture and the number of active elements are constrained. To exploit the geometry diversity of the FAA, we propose a coarse-to-fine scheme that couples discrete port selection with continuous joint refinement. In the coarse stage, a fast Fourier transform (FFT) based phase retrieval step converts the amplitude-only beam specification into an aperture-compatible complex target, after which an FFT-tailored greedy method selects the active ports and least squares initializes their complex weights. In the fine stage, a projected adaptive moment estimation procedure jointly refines the continuous port positions and beamforming weights while enforcing the minimum interelement spacing. For the evaluated two-beam configuration, the proposed scheme increases the mainlobe energy fraction from 35.73% to 48.92% and reduces the peak sidelobe level from -2.30 dB to -3.83 dB relative to a fixed array with the same aperture and active-port count.

0.30

Efficient Alternating Optimization for Hybrid Digital-Wave Beamforming in SIM-Assisted Cell-Free Massive MIMO

eess.SP cs.IT ·2026-08-23 ·Eunhyuk Park, Seok-Hwan Park, Osvaldo Simeone, Marco Di Renzo
published similarity 0.55
Abstract · IEEE PIMRC 2026

Stacked intelligent metasurfaces (SIMs) have recently emerged as a promising architecture for large-scale beamforming systems, including cell-free massive MIMO (CF-mMIMO), due to their cost-effective wave-domain signal processing capabilities. However, existing algorithms for the joint optimization of digital and SIM-enabled wave-domain beamforming typically incur prohibitive computational complexity. In this work, we propose an efficient alternating optimization (AO) algorithm for weighted sum-rate maximization in SIM-assisted CF-mMIMO systems employing hybrid digital-wave beamforming. Unlike prior approaches that rely on general-purpose optimization solvers or per-element gradient ascent methods, the proposed algorithm updates the digital and wave-domain beamforming variables on a per-access point (AP) or per-SIM-layer basis, enabling closed-form updates at each step. Numerical results demonstrate that the proposed algorithm reduces the computational complexity by more than 99\% compared to existing algorithms while achieving nearly identical sum-rate performance.

0.42

A Fully Wave-Domain Wideband MU MIMO OFDM Transmitter via Stacked Intelligent Metasurfaces

eess.SP cs.AR ·2026-09-09 ·Zheao Li, Jiancheng An, Chau Yuen
similarity 0.55
Abstract

This paper proposes an advanced realization principle for wideband multiuser multiple-input multiple-output orthogonal frequency-division multiplexing (MU-MIMO OFDM) transmitters, where the conventional transmitter-side baseband chain is physically synthesized in the wave domain. For design and optimization purposes, this fully wave-domain wideband MU-MIMO OFDM transmitter implemented by a cascaded SIM structure is functionally partitioned into two cascaded SIM blocks. The first block, denoted as SIM_1, integrates symbol loading and channel-adaptive MU-MIMO precoding updated at the channel-coherence timescale, mapping the user streams to a virtual port-subcarrier representation. The second block, denoted as SIM_2, acts as an offline-configured sampling-rate modulator that materializes the inverse discrete Fourier transform (IDFT) and cyclic prefix (CP) insertion directly in the wave domain. This baseband-free architecture establishes a virtual-to-physical transition from information bits to radiated CP-extended OFDM waveforms. To account for practical nonidealities, SIM_2 is optimized to fit the ideal multi-port CP-OFDM operator, and its residual response is mapped into an effective coupling matrix. Then, SIM_1 is optimized in a communication-oriented manner by jointly adapting discrete phase shifts and stream-subcarrier power loading to maximize the sum spectral efficiency. Results demonstrate the convergence, architecture trade-off, wave-domain OFDM materialization accuracy, and competitive performance of the proposed baseband-free transmitter.

0.44