CS Paper Radar

What is the effect of running-specific prostheses on long jumps? Optimization-based prediction and analysis using biomechanical models

Anna Lena Emonds, Johannes Funken, Wolfgang Potthast, Katja Mombaur

cs.RO ·submitted 2026-08-23 16:55 UTC · v1

Abstract

Long jumpers with below the knee amputation (BKA) that take off from their running-specific prosthesis (RSP) improved performances significantly over the last years. The long jump biomechanics differs compared to athletes without BKA and the question arises whether the spring-like properties of the RSP facilitate achieving long jumping distances. The aim of this work is to propose a long jump model for athletes with and without BKA, to evaluate it and to apply it for comparing long jump motions with and without RSP. We establish rigid multi-body system models of one athlete with and one athlete without below the knee amputation (BKA). Long jump motions are computed by solving a specific optimal control problem (OCP) with constraints enforcing a physically correct dynamics, both for motion reconstruction or motion synthesis. With the proposed long jump model, we are able to compute realistic long jump motions. We discuss the causes of differences in measured long jumps and show directions for eliminating them. For both athletes, the synthesized solutions reveal potential for performance improvement. The jumping distance of the athlete without BKA is 64cm (6.9%) longer than the one of the athlete with BKA in the synthesized solutions.

Comment
This work has been submitted to Scientific Reports and it is currently under review

Closest papers

Nearest neighbours by meaning across the whole index.

Prosthesis-Aware 3D Human Pose Estimation: A Dataset and Benchmark for RSP Users

cs.CV ·2026-09-16 ·Yilin Wen, Kechuan Dong, Fumiya Suginaka, Ken Endo, Yusuke Sugano
top venuebenchmarkdatasetcode/data similarity 0.63
Abstract · ECCV 2026. Project page: https://ut-vision.github.io/RSP3D/

Recovering 3D human body motion from video is important for applications such as rehabilitation assessment and sports performance evaluation. For prosthesis users, this requires capturing both natural body joints and the geometry of the prosthetic device, a challenge that existing methods are not designed to address. Model-based estimators rely on body models trained on non-amputee individuals and cannot represent prosthesis geometry, while model-free methods lack body kinematic priors and are unreliable under occlusion. This challenge is particularly prominent for users of running-specific prostheses (RSPs), where the RSP has a complex curved geometry and moves dynamically during exercise. To fill this gap, we collect RSP3D, the first 3D dataset of RSP users, covering essential daily-life and exercise actions from participants with varied amputation conditions, using a multi-camera marker-based motion capture setup. We formally define the task of prosthesis-aware 3D pose estimation, evaluate representative methods in a zero-shot setting, and confirm their individual limitations. We further propose a hybrid baseline combining model-based body joint estimation with model-free RSP shape recovery, establishing a starting point for future research.

0.50

A Mode-Unified, Continuous, and Biomimetic Control Strategy of a Robotic Lower Limb Prosthesis

cs.RO ·2026-10-13 ·Hanjun Kim, Sixu Zhou, John Shim, Xinyuan Guo, Kinsey R. Herrin +1 more
code/data similarity 0.60
Abstract · This work has been submitted to a research journal for possible publication. Copyright may be transferred without notice, after which this v…

Existing biomimetic lower-limb prosthesis controllers are commonly designed for discrete locomotion modes, requiring separate parameterizations for level walking, ramps, and stairs. We present a mode-unified prosthesis control framework that represents knee and ankle biomechanics continuously as functions of terrain slope and gait phase across those locomotion conditions. Locally optimized ascent and descent polynomial models were unified using radial basis function (RBF) interpolation, preserving the accuracy of the partitioned models while outperforming a global polynomial representation. The resulting biomechanics were transformed into continuous and slope-dependent impedance parameters and implemented within a single finite-state-machine (FSM) controller using bilateral sensing for gait-state estimation. Experiments with 10 individuals with transfemoral amputation demonstrated terrain-adaptive locomotion from level walking through ramps and stairs up to 35 degrees, including 13 degree ramp and 15 degree stair conditions absent from the underlying able-bodied (AB) dataset. Experimental results reproduced the principal slope-dependent biomechanical trends predicted by the unified model, with high agreement for knee-related measures (r-square = 0.82 - 0.99) and ankle kinematics (r-square= 0.78 - 0.96). These findings demonstrated that unified biomechanical parameterization enables a prosthesis control architecture across diverse terrain conditions while preserving key features of AB biomechanics without requiring independently tuned impedance parameter sets for each locomotion mode. To facilitate reproducibility and further development, the biomechanics modeling and impedance parameterization code is publicly available at https://github.com/kim2576.

0.26

Design and Analysis of a Nonlinear Parallel Mechanism Coupling for Dynamic Humanoid Legs

cs.RO ·2026-10-12 ·Rohit Kumar, Heiner Peters, Felix Wiebe, Franek Stark, Janne Janzen +3 more
similarity 0.58
Abstract

Humanoids increasingly demand lightweight leg mechanisms for agile, dynamic, and energy-efficient locomotion. Reducing distal inertia through proximal actuation has thus become a common design goal. Yet, compact transmissions that preserve torque capability and efficient force transmission remain hard to achieve. This paper presents a novel series-parallel leg design combining a knee parallel mechanism, an ankle parallel mechanism, and a nonlinear knee-ankle coupling where all actuators placed closer to the hip. As the knee flexes, the coupling passively assists ankle dorsiflexion for foot clearance and, as it extends it assists plantarflexion for push-off, redistributing ankle load through the knee transmission. We derive the coupling's nonlinear transmission models and validate them in simulation and on hardware. The design shows that the shared transmission lets both joints draw on each other's actuator capacity by easing the knee's peak torque demand under load and the ankle's peak speed demand during fast motion. With the leg's proximal actuator placement, the leg achieves an effective reflected mass of 0.37 kg at the foot for a 6 kg leg, demonstrating very low distal leg inertia for dynamic humanoid robots.

0.12

VideoRun2D Demo: Markerless Body Tracking for Biomechanical Analysis of Running

cs.CV ·2026-08-19 ·Luis F. Gomez, Julian Fierrez, Roberto Daza, Ruben Tolosana, Aythami Morales +3 more
similarity 0.57
Abstract · 5 pages, 4 figures, 2 tables. IEEE/CVF Conf. on Computer Vision and Pattern Recognition Workshops (CVPRW), 2026 (1st PhysHuman Workshop: Phy…

Human pose estimation has advanced significantly due to the development of deep learning models, increased data availability, and improved computing resources. These developments have led to highly accurate body tracking systems with direct applications in sports analysis and performance evaluation. The VideoRun2D Demo performs a biomechanical analysis during sprints using different human pose estimators. The proposed framework was evaluated using human pose trackers and expert manual annotations. The tested framework uses 314 sprints from 44 professional runners, focusing on two key joint angles in sprint biomechanics: 1) hip flexion/extension and 2) knee flexion/extension. The framework also includes a post-processing module for outlier detection. The tested results demonstrate that the average root-mean-square errors range from 11.46° to 5.83° for the best trackers. When integrated with the post-processing modules, these errors can be reduced to 9.87° and 5.30°, respectively. The VideoRun2D Demo findings suggest that human pose-tracking approaches can be valuable resources for the biomechanical analysis of running.

0.19

Subject-Specific Predictive Musculoskeletal Simulations of Lower-Limb Exoskeleton Assistance: Metabolic and Biomechanical Effects of Joint Assistance Strategies

cs.RO ·2026-10-02 ·Neethan Ratnakumar, Mariya Tohfafarosh, Xianlian Zhou
similarity 0.57
Abstract

Lower-limb exoskeletons have made considerable progress in reducing energy expenditure during walking. However, designing optimal assistance strategies remains challenging, particularly given inter-individual variability in anthropometry and biomechanics. This study explores energy-optimal lower-limb joint-assistance strategies using predictive simulations with musculoskeletal models. Subject-specific models of six able-bodied subjects, with BMI-based muscle strength scaling, were used in predictive simulations to generate gait at self-selected walking speeds. Ideal actuators were incorporated to simulate various combinations of joint assistance at peak levels of 25 Nm and 50 Nm to examine the effects of assistance on gait and metabolic savings. The effects of each assistance configuration were assessed through cost of transport (COT), joint kinematics, muscle activations, assistive torques, and joint-level power metrics to characterize the biomechanical and energetic impacts of different assistance strategies. At 50 Nm, combined H+K+A (hip-knee-ankle) assistance resulted in the greatest mean COT reduction of 48.50 +/- 4.55%, with individual reductions ranging from 42.22% to 54.65% across the subjects. Among single-joint conditions, assisting the hip was most effective, reducing COT by 31.77 +/- 5.21%; the knee and ankle produced smaller, comparable reductions (19.17% and 17.02%). H+A (hip-ankle) assistance (44.60 +/- 7.08%) emerged as the most effective two-joint assistive configuration. Increasing the torque bound increased positive assistive power primarily at the hip and ankle, while knee assistance showed little sensitivity and delivered positive power near pre-swing. These results support H+A assistance as an efficient two-actuator target, while identifying the knee's atypical pre-swing power strategy as a candidate for targeted experimental validation.

0.14

Central pivot point control of a body-attached spring-mass runner: periodic gaits, stabilization, template embedding and approximate analytic return maps

cs.RO eess.SYmath.DSphysics.bio-ph ·2026-11-02 ·İzel Sever, O. Kaan Karagöz, M. Mert Ankaralı
similarity 0.57
Abstract · 21 pages, 15 figures. Submitted to Chaos: An Interdisciplinary Journal of Nonlinear Science

The spring-loaded inverted pendulum (SLIP) describes the center-of-mass (COM) motion of runners but has no trunk. In trunk models, the hip torque couples posture and COM motion and destroys the central-force structure on which SLIP analysis relies. As a result, trunk models have been studied almost only numerically. We show that this structure can be restored. The central pivot point (CPP), a hip-torque law that directs the ground reaction force through the COM, decouples pitch exactly and reduces stance to a planar central-force problem. At upright posture, time-reversal symmetry produces one-parameter families of periodic gaits. A stance-phase pitch law and a stride-level regulator stabilize all computed gaits, also with bounded hip torque and friction. Under CPP, any radial force law in virtual-leg coordinates can be embedded independently of posture. For a linear radial template, the stance radius and the constant-momentum sweep have exact closed forms. With a new gravity correction, the resulting analytic return map, to our knowledge the first for a trunk model, predicts liftoff velocity and apex position with mean errors of 1.6% and 0.9%. The natural gaits of the embedded runner are symmetric and need no force step at touchdown. A near-reversibility argument explains their unit multiplier, and a scalar equation predicts them within 0.8%. A deadbeat stride controller based on the analytic map tracks changes of speed, height and posture. CPP thus makes trunk models accessible to the analytic tools developed for SLIP.

0.29

Open-Source Transtibial Prosthetic Bypass Preserving Joint Alignment: Gait Learning and Kinematic Evaluation

cs.RO ·2026-11-10 ·Apolline de Vaulchier, Pablo Nocito, Yann Corbel, Nathanaël Jarrassé
code/data similarity 0.57
Abstract

Prosthetic bypasses allow able-bodied individuals to walk with a prosthesis, enabling safe early-stage testing of new prosthetic devices before clinical trials. However, existing transtibial bypasses impose constraints, such as a contralateral shoe lift or a lateral offset of the prosthesis, and their effects on gait remain poorly documented. We present an open-source transtibial prosthetic bypass that preserves part of the sagittal knee mobility without these constraints. Six able-bodied participants familiarized themselves with the bypass for approximately 10~min, then walked on a treadmill with and without it, and joint kinematics were recorded with motion capture and then extracted with OpenSim. All participants were able to walk without handrail support, although single stance remained shorter on the bypass side (27% vs. 45% of the gait cycle). Bypass-side ankle kinematics were consistent with those reported for transtibial prosthesis users, whereas peak knee flexion during swing decreased from 61° to 36° (p<0.001) and hip range of the sound leg increased from 35° to 51° (p<0.01). Although gait with the bypass does not fully replicate that of prosthesis users, it yielded consistent gait patterns after only 10~min of learning. This bypass therefore provides a useful tool for the lower-limb prosthetics research community, facilitating preliminary experiments with able-bodied participants.

0.30

Hip Energized Monopedal Hopping

cs.RO ·2026-08-11 ·Shane Rozen-Levy, Griffon McMahon, Daniel Koditschek
similarity 0.57
Abstract · 35 pages, 11 figures

We present a novel stepping strategy for pitch unlocked planar monopeds where the reaction torques from stabilizing pitch with a conventional PD + feedfoward controller are recruited to counteract energetic losses from damping. By moving the location of the mass center, our controller increases the pitch stabilization torque, thereby adding energy to the gait. A new stepping policy adjusts the distribution of energy between the radial and angular degrees of freedom to counteract dissipative losses and achieve a user specified balance between steady state fore-aft speed and apex height. Hybrid averaging analysis yields closed form expressions for the fixed points and eigenvalues of the resulting gait, lending insight into the interplay between the physical and control parameters' influence on performance. Simulation studies on a generic 5 link biped and a careful model of the Penn Jerboa reveal a useful correspondence to these analytical predictions. Physical experiments on the Penn Jerboa exhibit stable locomotion with speeds ranging from 1.02 m/s to 1.77 m/s (5.10 leg lengths/s to 8.85 leg lengths/s) in a manner effectively approximated by the mathematical analysis.

0.10