CS Paper Radar

A Mode-Unified, Continuous, and Biomimetic Control Strategy of a Robotic Lower Limb Prosthesis

Hanjun Kim, Sixu Zhou, John Shim, Xinyuan Guo, Kinsey R. Herrin, Aaron J. Young

cs.RO ·submitted 2026-10-13 20:48 UTC · v2
code/data

Abstract

Existing biomimetic lower-limb prosthesis controllers are commonly designed for discrete locomotion modes, requiring separate parameterizations for level walking, ramps, and stairs. We present a mode-unified prosthesis control framework that represents knee and ankle biomechanics continuously as functions of terrain slope and gait phase across those locomotion conditions. Locally optimized ascent and descent polynomial models were unified using radial basis function (RBF) interpolation, preserving the accuracy of the partitioned models while outperforming a global polynomial representation. The resulting biomechanics were transformed into continuous and slope-dependent impedance parameters and implemented within a single finite-state-machine (FSM) controller using bilateral sensing for gait-state estimation. Experiments with 10 individuals with transfemoral amputation demonstrated terrain-adaptive locomotion from level walking through ramps and stairs up to 35 degrees, including 13 degree ramp and 15 degree stair conditions absent from the underlying able-bodied (AB) dataset. Experimental results reproduced the principal slope-dependent biomechanical trends predicted by the unified model, with high agreement for knee-related measures (r-square = 0.82 - 0.99) and ankle kinematics (r-square= 0.78 - 0.96). These findings demonstrated that unified biomechanical parameterization enables a prosthesis control architecture across diverse terrain conditions while preserving key features of AB biomechanics without requiring independently tuned impedance parameter sets for each locomotion mode. To facilitate reproducibility and further development, the biomechanics modeling and impedance parameterization code is publicly available at https://github.com/kim2576.

Comment
This work has been submitted to a research journal for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Closest papers

Nearest neighbours by meaning across the whole index.

A Unified Kinematic Representation Enables Reusable Biological Joint Moment Estimation

cs.RO ·2026-10-06 ·Jinwoo Hwang, Ilseung Park, Changseob Song, Vu Phan, Eni Halilaj +1 more
code/data similarity 0.68
Abstract · This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may…

Objective: Data-driven models that estimate physiological states, particularly biological joint moments, are widely used in exoskeleton control. However, these estimators are often coupled to device-specific sensor configurations, limiting controller transfer and the use of open-source biomechanics datasets. Methods: We proposed joint kinematics as an intermediate representation that decouples hardware-specific sensing from downstream biological joint moment estimation. A joint-moment estimator using joint angles and angular velocities was trained exclusively on open-source biomechanics data and evaluated using kinematics from a hip exoskeleton, knee exoskeleton, and inertial measurement unit (IMU) sensor suite during level-ground, ramp-ascent, and ramp-descent walking. Results: The estimator achieved an root mean square error (RMSE) of 0.17 Nm/kg and coefficient of determination (R2) of 0.79 using hip exoskeleton kinematics, 0.19 Nm/kg and 0.62 using knee exoskeleton kinematics, and 0.15 Nm/kg and 0.85 using kinematics derived from IMUs across bilateral hip, knee, and ankle joints. Conclusion: Joint kinematics enabled an estimator trained only on open-source data to operate across distinct wearable platforms. Significance: This framework may reduce target-device data collection and support transferable biological joint moment estimation for exoskeleton control and wearable biomechanics.

0.48

Tread: A Visuo-Inertial Framework for Terrain and Locomotion Context-Aware Gait-Phase and Speed Estimation in Wearable Robotics

cs.RO ·2026-10-13 ·Debadrata Sarkar, Akash Bachhar, Aman Arora
similarity 0.65
Abstract · Supplementary video: A video demonstrating real-time operation of the complete visuo-inertial inference pipeline is available at https://doi…

A wearable assistive robot must continuously estimate terrain, locomotion mode, gait phase, and walking speed. These quantities are commonly addressed by separate, terrain-specific models, with datasets rarely collected under a common protocol. This paper presents a visuo-inertial framework that connects these estimates through a causal pipeline using a chest-mounted camera and four lower-limb inertial measurement units (IMUs). Anticipatory Terrain Perception (ATP) classifies incoming terrain with 96.3% accuracy and anticipates terrain transitions by 1.46 s on average. Terrain-Aware Locomotion Mode Identification (TALMI) achieves 93.7% and 98.8% accuracy for its level-ground and stairs experts respectively, with mean transition latencies being below 200 ms. The relevant TALMI posterior is retained as a Probabilistic Locomotion Context (PLC) vector and provided to a shared Gait Kinematic Encoder (GKE), which supports 50-Hz bilateral gait-phase estimation and 2-Hz walking-speed estimation. Leave-one-subject-out evaluation yields gait-phase RMSEs of 1.75%, 2.97%, and 4.55% for level walking, stair ascent, and stair descent respectively while estimating speed over 3.5-5.5 km/h with a RMSE of 0.218 km/h. All inertial sensing based models use sensor-fused Euler angles as input rather than raw accelerometer and gyroscope signals, reducing dependence on sensor mounting variation.

0.26

Recovering Biomechanical Signals from Missing Keypoints Using Temporal Interpolation in Monocular Gait Analysis

cs.CV eess.IV ·2026-09-09 ·Shubham Jariwala
similarity 0.62
Abstract · 5 pages, 1 figure

Monocular pose estimation enables low-cost gait analysis but is sensitive to missing keypoints caused by occlusion, detection errors, or efficiency-driven model reduction. While prior work on recovering missing joints focuses on complex learned models, the effectiveness of simple temporal methods remains underexplored. We evaluate knee-angle estimation under a missing-ankle-keypoint condition and test a first-order temporal interpolation scheme as a recovery mechanism. Across 527 frames of monocular walking video (428 with valid baseline detections), removing the ankle keypoint increased mean angular error to 23.4° +/- 46.7° and collapsed signal variance to near zero. Temporal interpolation reduced error to 1.1° +/- 6.7° and restored variance and smoothness to within a few percent of baseline. These results indicate that gait signals possess sufficient temporal redundancy for a simple, computationally trivial interpolation scheme to recover a critical missing joint, without resorting to learned reconstruction models. The findings support low-complexity, real-time-compatible designs for gait analysis in resource-constrained or occlusion-prone monocular settings.

0.30

Sensing via whole-body interactions with complex terrains: physical insights from robotic models

cs.RO physics.bio-pheess.SY ·2026-10-11 ·Chen Li
similarity 0.60
Abstract · 8 figures

In nature, animals interact with complex terrains and often generate forces, deformations, and vibrations across the body and environment. Such interaction-induced mechanical information may guide behavior, yet its generation and use are difficult to resolve because movement rapidly and continually reconfigures the interactions that produce it. Sensory neurophysiology and biomechanics have revealed how mechanical information is transformed within sensory, neural, and musculoskeletal subsystems, whereas studies in complex terrains reveal rich whole-body interactions and behavioral outcomes. Connecting these levels remains a challenge. Here, I present a focused perspective on how biologically guided robotic physical models can help identify candidate mechanical information generated through whole-body interactions, test its physical mechanisms and behavioral benefits, and generate biological hypotheses. Three case studies illustrate this approach, multi-legged locomotor transitions to traverse dense clutter, limbless vertical body bending to propel through uneven terrain, and rapid spider leg crouching to help vibration sensing of prey on a web. Across these systems, correspondence between robots and animals supports the biological plausibility of these candidate physical mechanisms and motivates better measurements and models to determine how the relevant mechanical information is sensed and used to modulate behavior.

0.25

Duty Factor Predicts Robust Constrained Quadrupedal Locomotion Across Gait Types

cs.RO ·2026-09-18 ·James Zhu, David Ologan, George Ortiz, Thomas Chun Fai Lee, Selvin Garcia Gonzalez +3 more
similarity 0.60
Abstract

Quadrupedal robots are increasingly deployed in environments where locomotion must remain robust to disturbances and constrained terrain. Gait type, such as walking or trotting, is commonly used to characterize quadrupedal locomotion. However, gait type does not uniquely define locomotion, as parameters such as duty factor, speed, and stance width can vary within a single gait type. In this work, we investigate the relationship between these gait parameters using three distinct quadrupedal locomotion control approaches. First, using whole body trajectory optimization with LQR feedback, we show that duty factor is a stronger predictor of local error convergence than nominal gait type. Second, we investigate duty factor selection with a learned locomotion controller, suggesting how duty factor may serve as a low-dimensional parameter for adapting locomotion robustness in narrow-terrain environments. Finally, we show that these trends persist under a centroidal model predictive control framework and validate them through narrow-terrain experiments on a physical quadruped. These results show that duty factor provides a simple and effective basis for understanding and selecting robust quadrupedal locomotion across gait types and control architectures.

0.27

Reflex-Informed Neuromuscular Reinforcement Learning for Muscle-Driven Locomotion

cs.RO cs.GRcs.LG ·2026-09-10 ·Jian Zhou, Xingyu Zhang, Rui Ma, Yu Cao, Shane Xie +1 more
similarity 0.60
Abstract · 28 pages, 13 figures, and 9 tables

Muscle-driven locomotion provides a physically grounded approach to generating realistic human movement. However, achieving both physiological plausibility and adaptability to changes in musculoskeletal capacity and external disturbances remains a fundamental challenge. To address this limitation, we propose a Reflex-Informed Neuromuscular Reinforcement Learning framework for muscle-driven locomotion. Within this framework, a fixed phase-dependent reflex controller serves as the underlying neuromuscular control mechanism, while the reinforcement learning policy produces four biomechanically meaningful residual parameters to modulate key reflex gains and thresholds associated with hip swing, knee support, and ankle propulsion according to the current state. Experimental results demonstrate that the proposed framework generates physiologically plausible locomotion with improved kinematic accuracy and dynamic consistency, as well as better bilateral symmetry and stride-to-stride consistency under nominal walking conditions. The learned policy remains robust under muscle weakness and external perturbations without retraining.

0.47

What is the effect of running-specific prostheses on long jumps? Optimization-based prediction and analysis using biomechanical models

cs.RO ·2026-08-23 ·Anna Lena Emonds, Johannes Funken, Wolfgang Potthast, Katja Mombaur
similarity 0.60
Abstract · This work has been submitted to Scientific Reports and it is currently under review

Long jumpers with below the knee amputation (BKA) that take off from their running-specific prosthesis (RSP) improved performances significantly over the last years. The long jump biomechanics differs compared to athletes without BKA and the question arises whether the spring-like properties of the RSP facilitate achieving long jumping distances. The aim of this work is to propose a long jump model for athletes with and without BKA, to evaluate it and to apply it for comparing long jump motions with and without RSP. We establish rigid multi-body system models of one athlete with and one athlete without below the knee amputation (BKA). Long jump motions are computed by solving a specific optimal control problem (OCP) with constraints enforcing a physically correct dynamics, both for motion reconstruction or motion synthesis. With the proposed long jump model, we are able to compute realistic long jump motions. We discuss the causes of differences in measured long jumps and show directions for eliminating them. For both athletes, the synthesized solutions reveal potential for performance improvement. The jumping distance of the athlete without BKA is 64cm (6.9%) longer than the one of the athlete with BKA in the synthesized solutions.

0.31

Two-Stage Personalized Gait Phase Estimation in Stroke Survivors During Exoskeleton-Assisted Walking: An Offline Feasibility Study

cs.RO ·2026-09-14 ·Hyungseok Ryu, Pilwon Hur
similarity 0.59
Abstract · 11 pages

This study evaluated personalized gait phase estimation for stroke survivors using functional inertial measurement unit (IMU) alignment and two-stage sequential adaptation of models pre-trained on healthy gait. The estimator used signals from a thigh-mounted IMU. Heel force-sensitive resistor measurements provided reference phase labels for offline adaptation and evaluation. Stage 1 established a distillation-regularized participant-specific model, and Stage 2 performed conditional refinement using low-rank adaptation. Long Short-Term Memory (LSTM), Temporal Convolutional Network (TCN), and Transformer models were evaluated in five stroke survivors walking with a powered knee exoskeleton using leave-one-subject-out hyperparameter selection and sequential test-then-adapt Stage 2 replay. Relative to the non-adapted baselines, Stage 1+2 reduced the mean participant-wise phase root mean square error by 84.2%, 77.0%, and 60.7%, respectively. The Transformer achieved the lowest final error (2.90 +- 1.13$% of the gait cycle) and heel-strike timing error (23.7 +- 4.5ms). Policy-specific ablations showed that every-cycle updates generally produced the lowest or near-lowest error, whereas conditional updating reduced the update frequency with small accuracy differences. After personalization, alignment produced model-dependent changes in phase error while preserving or improving heel-strike detection and reducing heel-strike timing error for the LSTM and Transformer. Concurrent embedded tests showed that the TCN and Transformer maintained 100-Hz inference during Stage 2 updates without deadline misses, whereas the LSTM missed the 10-ms deadline in 6.6% of inferences. All updates completed within 0.8s. These results support the offline feasibility and embedded computational timing of the proposed framework for exoskeleton-assisted walking.

0.20