CS Paper Radar

Continuous Manifold-Decomposed Impedance Retargeting for Contact-Rich Imitation Learning

Jiahao Liu, Kento Kawaharazuka, Tasuku Makabe, Kei Okada

cs.RO ·submitted 2026-09-14 15:16 UTC · v1
hot direction

Abstract

CMDIR extends Manifold-Decomposed Impedance Retargeting (MDIR) to transform fixed-impedance demonstrations into continuous variable-impedance controllers, which can also serve as structured supervision for imitation learning. Continuous Task-Manifold Impedance Representation (TMIR) pairs an evolving task frame with controller instructions. Demo-relative Compromise dynamics retain moving-basis transport and control/physical metric mismatch, yielding displacement, reaction-impulse, and perturbation-sensitivity criteria. Quality-to-Fast automatically compiles a solver structure from development paths within a predefined finite space, re-instantiates that structure for each demonstration, and certifies the resulting candidate by multi-resolution evaluation. Across 225 retargeted-controller trials in three real contact tasks, full CMDIR improves mean task-proxy retention and reduces mean pose deviation, force fluctuation, and peak force relative to discrete MDIR. FastMPO achieves a $5.8$--$9.4\times$ speedup over C-MPO with comparable closed-loop outcomes. Downstream experiments demonstrate learnability of the complete TMIR supervision interface; lower force fluctuation and peak force are observed among successful executions, while completion reliability remains uneven across tasks and environments.

Comment
8 pages, 5 figures, 2 tables

Closest papers

Nearest neighbours by meaning across the whole index.

ImpedanceMimic: Learned Impedance as Action Space for Force-Accurate Motion Imitation

cs.RO cs.GRcs.LG ·2026-11-14 ·Matthias Jammot, Pembe Gizem Özdil
code/data similarity 0.72
Abstract · 39 pages, 13 figures, 28 tables. Project page: https://impedancemimic.github.io/ImpedanceMimic/

Recovering the forces behind a motion is ill-posed: different controllers can reproduce the same movement while generating different contact forces. Physics-based motion imitation resolves this ambiguity through simulation, but relies on fixed-gain proportional-derivative (PD) control. We show that fixed gains impose a trade-off between motion and force tracking, as contact and swing place conflicting demands on joint stiffness and damping. We introduce ImpedanceMimic, a reinforcement-learning policy that modulates per-joint stiffness, damping, and position setpoints from motion and force measurements, but requires only motion at inference. Across 129 participants and six activities, ImpedanceMimic outperforms matched fixed-gain PD under every integration scheme, direct-torque, muscle-actuated and existing imitation controllers in kinematic and force fidelity, approaching a dedicated motion-to-force regressor. By expressing gains as multiples of inertia-scaled priors, a single policy controls subject-specific biomechanical models without explicit anthropometric input and transfers zero-shot to unseen humans and a humanoid robot. The learned impedance forms a low-dimensional representation of motor state, shared across bodies, that generalizes to withheld activities: stiffness scales with load, and damping anticipates unloading.

0.17

Impedance Cloning: Learning Equilibrium Point Parameters for Contact-Rich Manipulation

cs.RO ·2026-09-25 ·Hayato Takahashi, Ryoga Oishi, Yuki Kasuga, Toshiaki Tsuji
similarity 0.71
Abstract · 8 pages, 7 figures, 3 tables. Submitted to IEEE Robotics and Automation Letters (RA-L)

Contact-rich manipulation requires robots to regulate force against surfaces whose geometry deviates unpredictably from training conditions. Trajectory-based imitation learning, which reproduces observable outputs, breaks down under such shifts. We propose Impedance Cloning, which instead imitates the biomechanical priors that generate motion -- the stiffness and equilibrium point -- and thereby passively absorbs contact uncertainty. Because these parameters encode intent rather than outcome, they generalize across surface geometries where trajectory reproduction does not. We extract them from bilateral teleoperation demonstrations via a particle filter without force/torque sensors and evaluate the framework on two CRANE-X7 manipulators. In a wiping task with joint-space actions, the trajectory-based baseline loses contact below -6 cm, whereas the proposed method maintains a consistent 4-5 N contact force above -6 cm, with a gradual decrease below; with Cartesian-space actions, its force-height slope over 0 to +8 cm is 0.13 +/- 0.03 N/cm, versus 0.34-0.83 N/cm for fixed-impedance baselines. In a pick-and-place task with 10 diverse cups (100 trials), the proposed method succeeds in 84 trials, outperforming the fixed-impedance baseline (74/100) and performing comparably to a variable impedance control baseline (82/100) with one demonstration instead of ten. In a grasping task, the representation reduces torque tracking error with both ILBiT and Mamba backbones, confirming its generality across architectures.

0.26

Manifold Generative Annealing for Contact Constraint-aware Impedance Control with Reinforcement Learning Prior

cs.RO ·2026-10-15 ·Zhilin He, Guoquan Qi, Changliu Liu
similarity 0.71
Abstract

Contact-rich robotic tasks require coordinated motion and impedance under uncertain interaction dynamics and physical constraints. While recent methods on learned policies provide useful interaction strategies, they may fail when contact conditions differ from those encountered during training. Model-based generative methods show promising receding-horizon trajectories optimization results, but often lack structured behavioral guidance and refinement that jointly accounts for constraint geometry and actual contact responses. To this end, we propose Manifold Generative Annealing (MGA), a joint model-free and model-based generative framework for motion--impedance optimization. MGA first organizes pretrained reinforcement learning policies into structured sequence proposals, retaining task-specific interaction strategies without committing to their execution. It then evaluates these proposals alongside exploratory samples through model-based rollouts for refinement or separate execution selection. Crucially, realization-aware manifold refinement aligns updates from the refinement bank with both task constraints and locally achievable physical responses, allowing learned experience to guide online adaptation under changing contact conditions. Experiments cover surface scanning, peg insertion, and humanoid pushing, with improved safety success rate of impedance control under nominal and sensing-shift conditions.

0.14

UniReflex: Plug-and-Play Force Control for Pretrained Generative Policies via Fast-Slow Reflex

cs.RO ·2026-08-18 ·Yan Huang, Shoujie Li, Ziwu Song, Wenbo Ding
highly cited similarity 0.70
Abstract

Generative imitation learning policies excel at trajectory planning but lack closed-loop force regulation, while directly incorporating force modalities often requires redesigning or retraining the network. We present UniReflex, a universal plug-and-play framework that equips frozen generative policies with variable impedance control (VIC) for contact regulation, guided by force-direction intent collected during demonstration, without further slow-backbone fine-tuning. By non-invasively intercepting deep latent representations from the action head, UniReflex drives a fast reflex network that decouples active force exertion from external interaction response. This scheme predicts normalized anisotropic stiffness directions for directional compliance allocation. Furthermore, UniReflex integrates an adaptive gating mechanism that enables seamless transitions between position-dominant planning and force-dominant execution. Real-world bimanual experiments demonstrate that UniReflex significantly improves contact stability and success rates while preserving original position accuracy. Our approach achieves 25-66x lower per-step backward latency relative to joint training strategies on the evaluated backbones.

0.48

CALM: Current Aligned Link Manipulation for Single Arm Oversized Object Lifting

cs.RO ·2026-09-24 ·Jun Hu, Sihan Chen, Kosta Jovanovic, David Navarro-Alarcon, Xueqian Wang +2 more
similarity 0.70
Abstract

Most robots manipulate objects solely with their end effectors, whereas humans flexibly leverage different body parts, such as the forearm and elbow, especially when handling oversized objects. Learning such whole-arm manipulation is chal-lenging due to long-horizon sparse rewards, limited contact sens-ing, and the sim-to-real gap in contact and actuator dynamics. To address these challenges, we propose Current-Aligned Link Manipulation, a framework for learning long-horizon contact-rich manipulation using motor current as joint load related feedback. Three stage-specific policies first learn repositioning, grasping, and lifting using privileged simulation information, and a stage router sequences them to generate complete task demonstrations. For sim-to-real transfer, a causal current mapper predicts physical motor current from simulated joint histories, aligning the actuator current observation between simulation and hardware. A unified student policy then learns from these demonstrations using only deployable sensor observations and is further refined with DAgger. The task policies are trained entirely in simulation, and the final student is deployed on hardware. Experiments demonstrate 76.2% (762/1000 trials) complete-task success in simulation and 73.3% success (22/30 trials) on the physical robot for sequential oversized-object lifting.

0.23

Imp-ACT: Adaptive Impedance Control and Action Chunking with Transformers to Learn Contact-Rich Manipulation from Demonstrations

cs.RO ·2026-09-25 ·Luca Zanetti, Doganay Sirintuna, Idil Ozdamar, Pietro Balatti, Heng Zhang +1 more
similarity 0.68
Abstract · 9 pages, 5 figures, submitted to IEEE International Conference on Robotics & Automation 2027, for associated video see https://youtu.be/iAu_…

Contact-rich manipulation requires robots to balance accurate motion tracking with compliant interaction, yet most visual-action policies leave compliance fixed at the controller level. We present Imp-ACT, a methodologically grounded and practical approach to incorporating direction-dependent Cartesian stiffness modulation directly into demonstration collection, without manual stiffness selection or offline target reconstruction. During teleoperation, a self-tuning impedance controller adapts stiffness along the instantaneous direction of motion while maintaining compliance in orthogonal directions. The adapted stiffness is applied and recorded alongside visual observations and motion commands, capturing motion and compliance under the same dynamics. We implement this pipeline using Action Chunking with Transformer (ACT) to predict end-effector pose, gripper action, and motion-direction stiffness from visual, proprioceptive, and wrench observations. The performance of Imp-ACT is evaluated on wiping and plug insertion using both success rate and quantitative measures of contact behavior. Compared with fixed low- and high-stiffness baselines, Imp-ACT achieves comparable or higher success while maintaining low interaction forces. In wiping, it reduces contact-force vibration by approximately $29\times$ relative to the compliant baseline and $180\times$ relative to the stiff baseline. In plug insertion, it reduces forces orthogonal to the insertion direction by $43\%$ relative to the better fixed-stiffness baseline. These results highlight the benefit of maintaining sufficient stiffness along the direction needed for task execution while preserving compliance in other directions to limit contact forces and accommodate environmental constraints.

0.32

OATH: Object-Agnostic Tracking for Dexterous Hands, Enabling Rapid Physics-based Retargeting

cs.RO ·2026-10-09 ·Solvin Sigurdson, Prasanna Sriganesh, Juan Borbon, Joel Burdick, Dingqi Zhang +1 more
code/data similarity 0.67
Abstract · 8 pages, 7 figures, 3 tables. Project page: https://multiplylabs.github.io/oath/

Retargeting human demonstrations into dynamically feasible dexterous hand trajectories requires resolving complex contact physics, yet current methods either omit physical constraints or rely on computationally expensive sampling-based optimization in simulation. Reinforcement learning has previously been used to achieve planning and control through contact dynamics; however, standard policies require object-specific training and fail to generalize across arbitrary geometries. This work reframes physics-based retargeting as a residual learning problem, where we demonstrate that zero-shot generalization across objects relies on structured state representations. Specifically, formulating the observation space to include a localized contact-error signal guiding each robot link to its target coordinate on the object surface enables a single, unified residual policy to successfully grasp novel, unseen object geometries. Rolling out this policy in simulation on a kinematic reference trajectory yields a physics-based retargeter, OATH. Operating at 0.4 seconds of compute per second of reference, OATH achieves 2.4x faster-than-real-time performance and a 60-350x reduction in computational cost compared to sampling-based methods. The system recovers 58% of held-out and 54% of unseen-object DexYCB trajectories while maintaining a sub-2 cm tracking error.

0.29

Potential-Field Action Representation for Reinforcement Learning in Contact-Rich Manipulation

cs.RO cs.AI ·2026-09-18 ·Xinyu Liu, Gökhan Solak, Arash Ajoudani
similarity 0.67
Abstract

Model-free reinforcement learning can acquire contact-rich robotic manipulation skills through trial-and-error interaction, but it often requires the policy to learn both task strategy and low-level motion generation. In this setting, the action representation is critical because it determines how policy outputs are converted into robot motion, shaping both exploration and physical execution. Direct Cartesian command interfaces require the policy to generate motion at every decision step, coupling task-level adaptation with continuous low-level control and increasing the learning burden. We propose PA-RL, a reinforcement-learning framework that uses artificial potential fields as the action representation. Instead of commanding motion directly, the policy adapts the parameters of an energy-like potential field, which generates a state-dependent guidance direction executed through a Cartesian impedance controller. We evaluate PA-RL on peg-in-hole insertion, a representative contact-rich task with nonlinear dynamics and discontinuous contact transitions. In simulation, PA-RL is compared with Cartesian velocity, Cartesian pose, and variable-impedance action spaces using the same RL algorithm. PA-RL is the only method to reach a 100% evaluation success rate within the allotted training time, while the best baseline reaches 92.6%. It also reduces joint-torque variation by 55.4% and Cartesian acceleration variation by 70.8% relative to the best baseline, without explicit motion-quality penalties in the reward. The simulation-trained policy further completes 9/9 real-robot insertions without fine-tuning, demonstrating the deployment feasibility of the learned potential-field interface.

0.22