CS Paper Radar

Giant Resonant Reflection Gain from Injection-Induced Quenching in a Tunnel Diode

Darmindra Arumugam, Jack Bush, Brook Feyissa

eess.SY physics.app-phphysics.ins-det ·submitted 2026-09-16 23:25 UTC · v1
unusual

Abstract

Negative-resistance microwave oscillators can simultaneously sustain autonomous oscillations and coherently scatter electromagnetic waves, enabling active reflection beyond conventional linear amplification. Here we demonstrate giant resonant reflection gain from synchronization-induced phase localization in a self-sustained tunnel diode oscillator operating near 2.96 GHz. Weak resonant RF injection drives a transition from a broadband free running state to a phase localized narrowband reflected carrier. The resulting reflected enhancement reaches 83.1dB relative to the injected signal and is accompanied by greater than order of magnitude linewidth collapse, nonlinear injection pulling, and a synchronization bandwidth of 15.84 kHz. Time resolved spectrograms directly resolve injection locking and frequency entrainment, while noisy Stuart Landau simulations reproduce the observed spectral concentration and detuning dependent gain roll off near the Hopf instability. Artificially increasing phase diffusion with broadband bias noise suppresses the reflected enhancement, confirming synchronization-induced quenching of phase fluctuations as the origin of the giant coherent reflection gain.

Closest papers

Nearest neighbours by meaning across the whole index.

HILO: Enabling Low-power, Dual-Band Communication using Tunnel Diode Oscillators

cs.NI cs.ARcs.ET ·2026-10-13 ·Dhairya Shah, Rajashekar Reddy Chinthalapani, Pramuka Sooriya Patabandige, Ambuj Varshney
publishedunusual similarity 0.54
Abstract · 6 pages, 12 figures. Accepted at the 2026 IEEE International Conference on RFID (IEEE RFID 2026)

Wireless communication remains the most power-consuming operation in embedded systems. Low-power transmitters such as backscatter achieve microwatt-scale operation but produce weak signals susceptible to in-band interference and frequency-selective fading, particularly in non-line-of-sight settings. Multi-band transmission can mitigate these effects through spectral-domain redundancy rather than temporal-domain redundancy, improving reliability without sacrificing bitrate or latency. However, conventional multi-band radio transceivers require duplicated RF chains or power-hungry synthesizers. We introduce HILO, a tunnel diode-based frontend that enables dual-band operation from a single circuit. HILO inverts the conventional paradigm: rather than suppressing the harmonics inherent to tunnel diode nonlinearity, it harnesses them. An external device injection-locks the oscillator to a fundamental frequency, simultaneously stabilizing a higher harmonic and yielding two injection-locked carriers without a second oscillator or frequency multiplier. In transmit mode, HILO exploits self-oscillating mixing to modulate both carriers simultaneously; in receive mode, it uses autodyne downconversion at both frequencies. By turning an inherent nonlinearity into a feature, HILO achieves dual-band links while consuming under 210 $μ$W.

0.64

Continuous Phase-Coherent Readout of a Magneto-Mechanical Resonator Using a Phase-Locked Loop

eess.SY ·2026-11-16 ·Frauke H. Niebel, Jan-Philipp Scheel, David Conrad, Hossein Shabanalinezhad, Matthias Graeser
similarity 0.49
Abstract · 2 pages, 2 figures, Sensor and Measurement Science International Conference (SMSI) 2027 conference

Magneto-mechanical resonators are wireless sensors that encode a measurand in their natural frequency. Existing systems estimate this frequency from repeated cycles of excitation and ring-down, which limits the precision and bandwidth range. Here, we introduce a continuous, phase-coherent readout based on a phase-locked loop. In a benchtop setup, one record stayed within 4 % of the precision-bandwidth limit over more than three decades of bandwidth, while conventional readouts remained about a factor of 4 above it.

0.26

Super-resolution ranging using a sub-terahertz self-injection-locked frequency-modulated radar

eess.SP ·2026-08-18 ·Hossein Naghavi, Zainulabideen Khalifa, Hamad Alotaibi, Farzad Khoeini, James Gruber +7 more
similarity 0.44
Abstract

Sub-terahertz (sub-THz) and terahertz (THz) frequency-modulated continuous-wave (FMCW) radars have opened a plethora of scientific and industrial applications, especially in the imaging field. While strong candidates for sub-THz/THz FMCW radar imagers are implemented using photonic methods, there is a desire to achieve the full integration and portability that only electronics can offer. However, integrated electronic sub-THz/THz FMCW radars have significantly lower bandwidth (< 100 GHz) than photonic-based radars, restricting the radar range resolution to the millimeter scale (> 1.5 mm). In addition, the electronic FMCW radar's broad bandwidth comes with increased transmitter phase noise, consequently degrading the radar range accuracy. Here, we present a sub-THz fully-integrated autodyne frequency-modulated (AFM) radar utilizing a self-injection locking (SIL) mechanism that fundamentally overcomes the aforementioned challenges of FMCW radars. The AFM radar supports an exceptionally wide effective bandwidth extending into the terahertz sweep range by forming an intermediate frequency comb spectrum in a quadratic receiver, unlocking the path for super-resolution ranging. Furthermore, SIL significantly reduces the transmitter's phase noise, allowing high-accuracy range measurements. We theoretically describe and experimentally demonstrate the SIL operation of the AFM radar. The proposed radar experimentally achieves sub-millimeter range resolution and a range accuracy of < 0.002%, enabling the imaging of covered printed letters with micrometer features.

0.22

Observable Spectral Framework for Noisy Amplitude Amplification: Stopping Stability and Correction

cs.ET quant-ph ·2026-11-16 ·Ge Zhong, Charith Jayasekara, Nisal De Silva, Muhammad Usman, Muhammad Aamir Cheema +1 more
similarity 0.43
Abstract · 28 pages, 5 figures, 4 tables; includes 38-page supplementary material (10 figures). Submitted to EPJ Quantum Technology

Stopping rules for noisy amplitude amplification often rely on channel-specific success-probability formulas, limiting their transfer across noise mechanisms. We develop an observable spectral framework for stationary noisy standard amplitude amplification under explicit leading-mode, spectral-separation, and residual-control conditions. Within this class, the first amplification lobe has a damped-oscillatory leading component and a bounded non-leading contribution. We derive how frequency shift, damping, and observable phase offset displace the leading peak, and establish sampled-gap criteria for retaining the ideal integer stopping depth, certifying recalibration, or selecting a robust candidate window. In single-target Grover search, frequency and damping errors have stopping-coordinate sensitivities proportional to the search-space size, whereas phase offsets scale with its square root; residual modes can independently reverse the ordering of neighbouring depths. Analytical constructions, circuit simulations, finite-shot inference, and calibration-derived device-like trajectories examine these predictions and their operational limits. For a 64-element search, an a posteriori sampled-set check selects depth five over six, with success probability increasing from 0.595 to 0.626. The resulting theory links observable spectral dynamics to conditional integer stopping guarantees without requiring a separate microscopic channel solution.

0.34

Analog Time-Frequency Analysis and Frequency Measurement of Ultra-Wideband Microwave Signals via Dual-Comb Channelization

eess.SP physics.optics ·2026-08-26 ·Taixia Shi, Wentao Ma, Fangzheng Zhang, Yang Chen
unusual similarity 0.42
Abstract · 21 pages, 12 figures

Frequency-to-time mapping (FTTM)-based photonics-assisted spectrum sensing enables wideband spectrum monitoring for applications such as cognitive radio and electronic warfare. However, FTTM-based photonics-assisted spectrum sensing approaches involve trade-offs among analysis bandwidth, temporal resolution, and frequency resolution. Although channelization has been introduced to alleviate these trade-offs, the limited number of available channels in previously reported systems constrains further improvements in overall performance. Here, we propose a photonics-assisted dual-comb channelization architecture for broadband frequency measurement and time-frequency analysis. The system employs a stepped-frequency pump based on stimulated Brillouin scattering (SBS) to generate an optical filter comb and adopts a single-laser design for the pump, probe, and reference paths to enhance frequency stability while reducing system complexity. Experimental results show a 48-GHz analysis bandwidth in the 16-channel configuration and 52 GHz in the 20-channel configuration, together with microsecond-scale temporal resolution and a frequency resolution better than 80 MHz. The proposed architecture therefore offers a practical and reconfigurable solution for real-time wideband spectrum sensing.

0.30

Instrument-Level Validation of Upper Sideband Syntonization Concept

eess.SP astro-ph.IM ·2026-09-09 ·Volodymyr Kudriashov, Manuel Martin-Neira
unusual similarity 0.41
Abstract · 10 pages, 9 figures

Upper Sideband Syntonization (USBS) is a two-way frequency-transfer concept proposed by the European Space Agency for distributed space radio interferometric systems. Previous investigations validated the concept primarily through frequency-stability and phase-transfer measurements. This work demonstrates the first end-to-end instrument-level validation of the USBS concept through coherent W-band cross-correlation measurements and image reconstruction. A P=2 USBS breadboard was integrated with a W-band radio interferometer developed for this test. The synchronized local oscillators (LOs) were evaluated through long-term cross-correlation measurements and coherent imaging of a point-like noise source. The results were compared with those obtained using a conventional common LO as well as two independent free-running LOs. The USBS-derived LOs maintained coherence over 500 s of cumulative effective integration time acquired over approximately five days of elapsed time and preserved inter-session phase stability over measurements spanning 40 days. The reconstructed image is nearly indistinguishable from that obtained with a common LO, whereas independent free-running LOs lead to severe coherence degradation, image distortion, and approximately 38 dB loss of peak response. The results demonstrate that USBS preserves the interferometric coherence required for W-band imaging and present the first end-to-end instrument-level validation of the USBS syntonization concept for future distributed space radio interferometric missions

0.30

A 188-260 GHz Distributed Frequency Multiplier Achieving 4 dBm Saturated Output Power in 65 nm CMOS

eess.SP ·2026-10-03 ·Ahmet Yelboğa, Shuhei Amakawa, Korkut Kaan Tokgöz
similarity 0.40
Abstract · Latin America Microwave Conferance 2026

Sub-terahertz (sub-THz) low-phase-noise signal sources commonly employ frequency multiplier chains to extend the operating frequency of lower-frequency oscillators. This paper presents the design and simulations of a wideband, high-output-power frequency multiplier implemented in TSMC 65 nm CMOS technology. The proposed design is based on a distributed frequency multiplier with a quarter-wave transmission line termination at the drain side, where the reflected and forward-traveling waves are constructively combined to enhance the output power. The proposed frequency doubler achieves a minimum conversion loss of 12 dB at an input frequency of 115 GHz with an input power of 12 dBm, resulting in an output power of 0 dBm and 12.6 dB fundamental suppression. For the same input power, the output power remains within 3 dB of its peak value over the 188-260 GHz output frequency range. At 230 GHz, the proposed design achieves a saturated output power of 4 dBm while occupying an area of 0.149 mm^2.

0.25

Rydberg Atomic Quantum Receivers for OFDM Systems: An Atomic-Comb Design

cs.IT physics.atom-phquant-ph ·2026-10-11 ·Yuanbin Chen, Chong Meng Samson See, Chau Yuen
similarity 0.39
Abstract · This manuscript has been submitted to IEEE journal

Rydberg atomic quantum receivers (RAQR) exhibit exceptional sensitivity to radio-frequency (RF) signals, positioning them as promising candidates for next-generation wireless systems. Extending their capabilities to orthogonal frequency-division multiplexing (OFDM), however, requires atomic responses that go beyond broadband reception and are tailored to the structured interference of multicarrier signals. To bridge this gap, we develop an atomic-comb Rydberg receiver based on six-wave mixing (SWM) transduction. In particular, injecting a multi-tone local oscillator (LO) into the RAQR generates frequency-shifted replicas of the intrinsic SWM response. By subtly tuning the amplitude and phase of each LO tone, constructive and destructive interference can be selectively induced to preserve desired response components while attenuating harmful frequency offsets. Furthermore, we harness the response-reshaping capability of the proposed atomic comb to proactively mitigate OFDM interference. More explicitly, by exploiting the discrete difference-frequency structure of both carrier-frequency-offset (CFO)-induced and phase-noise (PN)-induced inter-carrier interference (ICI), we optimize the atomic-comb response to suppress dominant ICI components directly. We further reveal an intrinsic coupling between spectral shaping and the time-domain effective channel memory, motivating a joint optimization of both ICI and inter-symbol interference (ISI), which simultaneously suppresses inter-carrier leakage and post-cyclic-prefix (CP) tail energy. Extensive simulation results validate our atomic-comb design, unveiling that the proposed atomic comb can effectively reshape the receiver response over the OFDM, while mitigating ICI, shortening the effective channel memory, and substantially lowering CP overhead.

0.29