CS Paper Radar

HILO: Enabling Low-power, Dual-Band Communication using Tunnel Diode Oscillators

Dhairya Shah, Rajashekar Reddy Chinthalapani, Pramuka Sooriya Patabandige, Ambuj Varshney

cs.NI cs.ARcs.ET ·submitted 2026-10-13 16:10 UTC · v1
publishedunusual

Abstract

Wireless communication remains the most power-consuming operation in embedded systems. Low-power transmitters such as backscatter achieve microwatt-scale operation but produce weak signals susceptible to in-band interference and frequency-selective fading, particularly in non-line-of-sight settings. Multi-band transmission can mitigate these effects through spectral-domain redundancy rather than temporal-domain redundancy, improving reliability without sacrificing bitrate or latency. However, conventional multi-band radio transceivers require duplicated RF chains or power-hungry synthesizers. We introduce HILO, a tunnel diode-based frontend that enables dual-band operation from a single circuit. HILO inverts the conventional paradigm: rather than suppressing the harmonics inherent to tunnel diode nonlinearity, it harnesses them. An external device injection-locks the oscillator to a fundamental frequency, simultaneously stabilizing a higher harmonic and yielding two injection-locked carriers without a second oscillator or frequency multiplier. In transmit mode, HILO exploits self-oscillating mixing to modulate both carriers simultaneously; in receive mode, it uses autodyne downconversion at both frequencies. By turning an inherent nonlinearity into a feature, HILO achieves dual-band links while consuming under 210 $μ$W.

Comment
6 pages, 12 figures. Accepted at the 2026 IEEE International Conference on RFID (IEEE RFID 2026)

Closest papers

Nearest neighbours by meaning across the whole index.

Giant Resonant Reflection Gain from Injection-Induced Quenching in a Tunnel Diode

eess.SY physics.app-phphysics.ins-det ·2026-09-16 ·Darmindra Arumugam, Jack Bush, Brook Feyissa
unusual similarity 0.54
Abstract

Negative-resistance microwave oscillators can simultaneously sustain autonomous oscillations and coherently scatter electromagnetic waves, enabling active reflection beyond conventional linear amplification. Here we demonstrate giant resonant reflection gain from synchronization-induced phase localization in a self-sustained tunnel diode oscillator operating near 2.96 GHz. Weak resonant RF injection drives a transition from a broadband free running state to a phase localized narrowband reflected carrier. The resulting reflected enhancement reaches 83.1dB relative to the injected signal and is accompanied by greater than order of magnitude linewidth collapse, nonlinear injection pulling, and a synchronization bandwidth of 15.84 kHz. Time resolved spectrograms directly resolve injection locking and frequency entrainment, while noisy Stuart Landau simulations reproduce the observed spectral concentration and detuning dependent gain roll off near the Hopf instability. Artificially increasing phase diffusion with broadband bias noise suppresses the reflected enhancement, confirming synchronization-induced quenching of phase fluctuations as the origin of the giant coherent reflection gain.

0.24

A LoRa-Compatible Receiver with Programmable Noise-Power Trade-Off and Integrated Wake-Up Mode

cs.AR ·2026-10-14 ·Marco Gonzalez, Pol Maistriaux, Jérôme Louveaux, David Bol
similarity 0.48
Abstract · 13 pages, 19 figures, removed mentions to IEEE

Programmable receivers allow an optimal performance in the variable conditions of the wireless channel. An extensive analysis of their noise-power trade-off enables the development of a main receiver with embedded wake-up circuitry. This makes the seamless integration of wake-up receivers (WuRXs) in RF receivers possible, avoiding power, area, complexity, and cost overheads in the system. In this paper, we propose the first LoRa-compatible receiver with an integrated wake-up mode and a programmable noise-power trade-off. In main-receiver mode, it consumes 4.57 mW for a sensitivity of -138 dBm, but it can save up to 62.6% of power consumption at the cost of an 8.3-dB sensitivity degradation. In wake-up mode, sensitivity down to -126 dBm is achieved for a 32-ms latency and 1.5 mW of power consumption. The power consumption remains relatively high due to a sub-optimal design of the the phase-locked loop (PLL). In the end, the wake-up mode consumes 3X less than the lowest-noise configuration in main-receiver mode.

0.28

Towards Energy-Neutral IoT Sensors: Low-Cost Chirp-Based Backscattering Node Using a COTS Microcontroller and Multi-Load Front-End

eess.SP ·2026-09-23 ·Tijl Schepens, Liesbet Van der Perre, Gilles Callebaut
similarity 0.47
Abstract

Backscatter communication has proven to be a key enabler for energy-neutral sensor nodes in the IoT. It allows ultra-low-power nodes to transmit sensor data by reflecting incident RF signals. Practical large-scale deployment requires hardware solutions that are both cost-efficient and widely available. This paper investigates the practical limits of implementing backscatter transmitters exclusively using COTS components. We compare a two-load and multi-load architecture in terms of hardware requirements, complexity and spectral efficiency highlighting the most important trade-offs. A multi-load backscatter architecture is developed using a resource constrained low-power microcontroller, levering DMA to achieve high switching speeds while minimizing processing overhead. Furthermore, we present a layout agnostic load design methodology based on scattering parameters, allowing precise control of the reflection coefficients. A prototype implementation demonstrates a successful backscatter transmission of a single-sideband chirp with reduced harmonic distortion. Measurement results show suppression of the backscattered carrier and the second sideband by 10 dBm. This demonstrates that low-cost sensor nodes can be built using COTS components enabling remote monitoring at extended lifetimes.

0.23

Injected and Leaked: Actively Inducing Side-Channel Leakage Using Electromagnetic Injection and Hardware Nonlinearity

cs.CR ·2026-09-04 ·Haoran Yan, Ziyu Shao, Shuhao Zhang, Qinhong Jiang, Yan Long
top venue similarity 0.47
Abstract · Website: https://injecteave.github.io/

Electromagnetic (EM) side-channel leakage and injection are typically treated as distinct physical phenomena, threatening data confidentiality and integrity respectively. This work investigates how EM injection can be used to amplify side-channel leakage that is otherwise infeasible. We introduce a novel framework for Injection-Induced EM Side Channels to enable integrated, closed-loop EM security analysis. Our theoretical modeling and experimental measurements reveal that nonlinear hardware components, such as ubiquitous amplifiers, analog-to-digital converters, and power converters, can modulate secret electrical signals onto an injected EM carrier and thus upconvert low-frequency secrets into measurable EM emissions. By tuning the injection frequency and amplitude, adversaries gain the ability to actively shape the effective spectrum and entropy of the resulting leakage. We design InjectEave attack and demonstrate eavesdropping on the audio played through wired and wireless headphones from up to 30 m away with accessible RF equipment, as well as in through-wall scenarios, and characterize injection-induced EM leakage of other low-frequency secrets such as power consumption of smart home devices and analog sensor inputs. Case studies further demonstrate how the proposed techniques enable closed-loop eavesdropping and manipulation of landline-phone conversations. Finally, we analyze the broader security challenges and mitigations.

0.52

Frequency-Dependent Hybrid Digital and Microwave Linear Analog Computer (MiLAC) Beamforming for Multiuser MIMO-OFDM Systems

eess.SP ·2026-10-25 ·Yiyang Peng, Zheyu Wu, Bruno Clerckx
similarity 0.44
Abstract

Microwave linear analog computing (MiLAC) has recently emerged as a promising approach for reducing the hardware and digital-processing requirements of large-scale multiple-input multiple-output (MIMO) systems. In narrowband multiuser systems, hybrid digital-MiLAC beamforming can achieve digital beamforming flexibility with only as many radio-frequency (RF) chains as data streams. However, extending this advantage to wideband systems is nontrivial because practical MiLAC circuits exhibit frequency-dependent responses. In this paper, we investigate hybrid digital-MiLAC beamforming for multiuser MISO-OFDM systems with a frequency-dependent MiLAC circuit model. We characterize the frequency dependence of MiLAC by relating the susceptance of each tunable component across subcarriers to its center-frequency value. Under this frequency coupling, we show that a single MiLAC circuit generally cannot simultaneously match the desired beamforming directions across all subcarriers, highlighting the essential role of subcarrier-dependent digital precoding. We then develop a block coordinate descent (BCD) algorithm to jointly optimize the digital and MiLAC beamformers for average sum-rate maximization. In particular, an efficient alternating direction method of multipliers (ADMM) algorithm is custom-designed to handle the frequency-coupled circuit constraints in the MiLAC beamformer subproblem. Simulation results show that the proposed hybrid digital-MiLAC design outperforms conventional hybrid digital-analog beamforming, particularly when fewer RF chains are available and the channel is more frequency-selective. With $64$ transmit antennas and $4$ data streams, it attains $96.3\%$ of the digital sum-rate using only $8$ RF chains. Furthermore, under highly frequency-selective channels and using $4$ RF chains, it provides a $48\%$ sum-rate gain over the conventional hybrid design.

0.39

A Low-Complexity Message-Passing Receiver for FTN-WAFT under Nonlinear Distortion

eess.SP ·2026-09-29 ·Xianle Dai, Qu Luo, Jianguo Li, Bowei Xue, Kai Yang +2 more
published similarity 0.43
Abstract

This letter proposes a faster-than-Nyquist (FTN) weighted affine Fourier transform (WAFT) transmission scheme, termed FTN-WAFT, which combines the peak-to-average power ratio (PAPR) flexibility of WAFT with FTN time compression to improve spectral efficiency and power amplifier (PA) efficiency over high-mobility channels. However, operating the PA at a reduced input back-off (IBO) inevitably introduces nonlinear distortion, which further couples with FTN-induced inter-symbol interference (FTN-ISI) and doubly selective channel dispersion. To address this practical impairment, a multilayer message-passing (MLMP) receiver aided by PA interference cancellation (PA-IC), termed PA-IC-MLMP, is proposed. The proposed receiver reconstructs the dominant PA distortion from soft symbol estimates, cancels the channel-propagated nonlinear interference, and performs MLMP over the WAFT, FTN, channel, and constellation layers. Simulation results show that the proposed receiver improves the bit error rate (BER) and effective throughput under nonlinear PA constraints while maintaining low complexity.

0.32

Omni-Photonic Base Station: A Three-Functional-Domain Photonic Architecture for Evolutionary 6G Wireless Infrastructure

eess.SP physics.optics ·2026-08-14 ·Dapeng Wang, Xiaoxiong Song, Ziling Fu, Wenyang Cheng, Jiayao Wang +5 more
similarity 0.43
Abstract

6G mobile communications impose immersive communication demands for higher data rates and massive connectivity, while emerging integrated sensing-computing-intelligence scenarios require base stations to concurrently enhance computing capability, guarantee service latency, and realize sensing. We propose the Omni-Photonic Base Station-a progressive evolutionary architecture that introduces photonic technologies into three functional domains, namely baseband processing, fronthaul transmission, and the RF front-end, and obtains system-level gains through cross-domain co-design. By introducing photonics, Omni-PBS harnesses the inherent physical advantages of ultra-broad bandwidth, ultra-low propagation latency, and native parallelism to transcend the aforementioned electronic bottlenecks and fulfill the compound demands of 6G scenarios. The optical baseband computing domain employs photonic accelerators to perform linear computation-intensive tasks, improving the energy efficiency of AI inference by one to two orders of magnitude. The analog optical fronthaul domain replaces digital fronthaul with analog radio-over-fiber , which eliminates the ADCs/DACs and digital intermediate-frequency chips in the remote unit and substantially reduces fronthaul bandwidth requirements. The microwave-photonic RF domain breaks through the bandwidth and frequency limitations of electronic RF front-ends via optical true-time-delay beamforming, programmable photonic filtering, and optical heterodyne frequency conversion. The three domains yield system-level gains beyond single-domain summation through four co-design principles: end-to-end optical-domain continuity, cross-domain co-design, optical computing resource scheduling, and joint optimization of functional splitting.

0.04

WiFi Backscatter for Green Internet of Things: Concepts, Research Trends, and Practical Challenges

cs.NI ·2026-09-28 ·Weiqi Wu, Shuo Wang, Zhaoyuan Xu
survey similarity 0.43
Abstract

WiFi backscatter has emerged as a promising technology for green Internet of Things (IoT) connectivity by enabling battery-free devices to communicate through widely available WiFi signals. Despite substantial progress in recent years, a considerable gap remains between research prototypes and practical deployment. This paper provides an overview of WiFi backscatter from the perspective of practical and green IoT systems. We first introduce the fundamentals and key enabling techniques, together with potential IoT applications. We then outline recent research trends toward higher throughput, concurrent communication, simplified deployment, commercial compatibility, and joint communication and sensing. Furthermore, we identify the key challenges that still hinder practical deployment, such as limited transmitter-to-tag operating range and packet loss in frequency-shifted backscatter. We believe that addressing these challenges will be critical to enabling WiFi backscatter to become a practical communication technology for future green IoT systems.

0.15