CS Paper Radar

Relationship between Loss of Load Expectation and Frequency of Load Loss Events

Chanan Singh

eess.SY ·submitted 2026-09-18 23:46 UTC · v1
unusual

Abstract

Loss of Load Expectation (LOLE), originally calculated as the expected number of days of load loss, has also been used as a frequency metric. This paper shows that LOLE can indeed be calculated as a frequency metric, but only with restricted conditions, and that it differs fundamentally from the standard frequency metric employed in the frequency and duration (F&D) approach. A lack of understanding of these conditions can lead to incorrect applications and interpretations.

Closest papers

Nearest neighbours by meaning across the whole index.

A New Analytical Method and Interpretation of Loss-of-Load Counts

eess.SY ·2026-11-12 ·Aidan Looney, Chanan Singh, Le Xie
similarity 0.81
Abstract · 5 pages, 3 figures, 1 table, submitted to IEEE PESGM

This paper establishes the relationship between loss-of-load expectation (LOLE) and loss-of-load frequency (LOLF). We show why LOLE generally does not measure distinct-event frequency, mean event duration, or shortage magnitude. We identify conditions under which peak-based LOLE admits a frequency interpretation as the expected count of deficient daily peaks per horizon and distinguish this quantity from LOLF. We also derive an analytical formulation for frequency-and-duration indices that combines a convolution-derived generation probability-and-frequency model with chronological load changes. Under stationary generation, it uses the prescribed load profile directly, without constructing a separate load model or discretizing load magnitudes. Studies using generation and load data from the 24-bus IEEE RTS reveal different event frequencies and mean event durations at identical peak-based LOLE, motivating their separate assessment. Numerical comparisons demonstrate the accuracy advantage of the proposed analytical calculation over the conventional analytical implementations, quantifying the LOLF errors incurred by load discretization.

0.18

New and Improved Analytical Methods for Calculating Power System Adequacy Metrics

eess.SY ·2026-10-04 ·Chanan Singh
similarity 0.51
Abstract

A new analytical technique is proposed for calculating adequacy metrics for generation planning. The proposed technique is simple, direct, and provides higher accuracy than traditional discretized approaches. Additionally, a new analytical methodology is introduced for calculating loss of load days (LOL Days) as distinct from loss of load events or frequency of load loss. This paper emphasizes that, where feasible, analytical methods are preferable to Monte Carlo simulations because they yield exact closed-form solutions rather than statistical estimates.

0.25

Long-Term Operational Planning Using Scenario-Based System Load Forecasting

cs.CR ·2026-09-28 ·Akash Debnath, Shiuli Subhra Ghosh, Jaime De La Ree, Alex Freeman, Kavin D Jones
similarity 0.46
Abstract

The rapid expansion of hyperscale data centers is significantly increasing electricity demand in Northern Virginia. Dominion Energy, the region's primary electric utility, must reinforce its transmission network to support this growth. These projects require planned outages that must be evaluated months in advance to support construction planning and outage coordination while meeting NERC and PJM N-1 reliability requirements. Long-term outage studies are commonly performed day by day using monthly or seasonal peak-load assumptions. Although this approach simplifies analysis, it can be overly conservative because it does not capture granular load variability. Consequently, short-duration outages that may be feasible under realistic loading conditions are often postponed or denied, delaying critical transmission expansion and grid modernization projects. This paper evaluates the operational value of incorporating realistic multigranular load forecasts into long-term, contingency-based outage assessments and compares the results with conventional peak-based methods. Daily, weekly, and monthly forecasts are developed using statistical and machine-learning models, including SARIMA, Prophet, Gradient Boosting, and Random Forest, followed by bottom-up temporal reconciliation to maintain consistency across forecast horizons. Results show that granular load forecasts reduce unnecessary conservatism and improve outage accommodation, particularly for short-duration requests, without changing existing reliability criteria. The proposed approach can strengthen long-term outage coordination and support timely transmission reinforcement and grid modernization.

0.20

Fast Reassessment of Prolonged Electricity Shortages under Shared Fuel Interruptions

eess.SY ·2026-10-19 ·Dogan Urgun
code/data similarity 0.46
Abstract · 11 pages, 4 figures, 5 tables. Submitted to IEEE Transactions on Reliability. Code and data: https://github.com/DoganUrgun/Fast_Reassessment…

When several generators share a fuel supply, one interruption can disable them together and cause electricity shortages lasting days. Such interruptions can be made less frequent, for example by weatherizing gas supply, or shorter, for example by on-site backup fuel. Yet traditional resource adequacy indices, expected unserved energy and loss-of-load hours, fail to distinguish such measures whenever they remove the same expected time without fuel, because for interruptions independent of system conditions these indices depend on the interruptions only through this time. Their difference is revealed by prolonged-shortage exposure, the expected annual hours in shortages of at least a given duration, whose exact chronological calculation must be repeated for every interruption scenario. To reduce this cost, a fast reassessment method with guaranteed accuracy is proposed. Network calculations are performed once and condensed into a restoration response, the additional prolonged-shortage hours caused by one interruption of each duration, from which any scenario is evaluated as a weighted sum without new simulation. An hour-by-hour error bound determines whether this evaluation is accurate enough, and exact dynamic programming is applied otherwise, so that every result lies within a requested tolerance of the exact value on the same Monte Carlo samples. On the Reliability Test System of the Grid Modernization Laboratory Consortium, most evaluations were accepted, fully accepted scenarios typically ran more than 200 times faster than exact calculation, and total computation time decreased in every workload. Measures against fuel interruptions can thus be screened quickly and accurately by their effect on prolonged shortages.

0.37

On the Concept of an Optimal Portfolio of Uncertain Flexible Loads

eess.SY ·2026-09-04 ·Julie Rousseau, Philipp Heer, Kristina Orehounig, Gabriela Hug
published similarity 0.44
Abstract · Accepted to the 2026 PowerUp conference

Flexible loads can enhance power system stability by providing reserves, but their limited energy capacity and uncertain availability distinguish them from conventional generators. To accommodate these characteristics, the Danish Transmission System Operator (TSO) recently introduced new reserve market rules that incorporate energy constraints and relax reliability requirements. In this context, the optimal reserve quantification becomes a joint chance-constrained reserve quantification problem, which is difficult to solve. In this paper, we derive two analytical reformulations of this problem: an exact one when a reserve direction dominates and an approximate one, otherwise. Furthermore, when flexible loads must collectively satisfy a reliability requirement, we introduce the concept of an optimal portfolio of flexible loads: adding loads with similar expected values but different stochastic behaviors to an existing portfolio may change the total portfolio's reserves. To support this idea, we theoretically study the marginal increase in reserves resulting from adding a load. Numerical results show that our analytical reformulations closely match the exact formulation, with a mean absolute error of 2.5%. Case studies further demonstrate the existence of optimal load groupings and our ability to predict the portfolio in which a load's marginal value is highest, leveraging our theoretical analysis.

0.43

Fast Analytical Method for Resource Adequacy Assessment in Renewable-Rich Power Systems

eess.SY ·2026-10-13 ·Seyed Amir Hosseini, Mohammad Reza Karimi Gharigh, Antonello Monti, Peter Palensky, Saeed Peyghami
theory similarity 0.43
Abstract

This paper proposes a novel analytical method for resource adequacy assessment in renewable rich power systems. The approach begins by applying the stress strength method to estimate two key resource adequacy indices: loss of load expectation (LOLE) and expected energy not supplied (EENS). This method requires defining the probability distribution functions (PDFs) for both the generation side and the load side. The load is assumed to follow a normal probability distribution, while the generation side probability distribution is derived from the combined PDFs of conventional, wind, and solar power sources. The approach models the cumulative impact of uncertainties on resource adequacy using the central limit theorem (CLT), and improves accuracy with a cumulant based Gram Charlier expansion when the CLT alone is insufficient. The effectiveness of the proposed method is validated through Monte Carlo simulations conducted on the IEEE single area and multi-area RTS-96 test systems. The results demonstrate that the proposed method achieves a substantial reduction in computational time, which is crucial in the context of operational planning, without sacrificing accuracy. Furthermore, its performance improves as renewable penetration increases, making it particularly suitable for future power systems operation and planning.

0.20

Cascading Contingency Analysis of Modern Power Systems Using a Stochastic Hybrid Systems Framework

eess.SY eess.SP ·2026-11-10 ·Masoud H. Nazari, Hamid Varmazyari
published similarity 0.43
Abstract · This paper was accepted at the 2026 North American Power Symposium (NAPS)

This paper presents a cascading contingency analysis and risk assessment framework that incorporates probabilistic mode transitions motivated by stochastic hybrid system (SHS) concepts together with power-flow-based stress evaluation. A two-stage modeling approach is adopted in which sensitivity-based analysis is first used to identify candidate cascading transitions, followed by DC power flow re-evaluation to accurately capture post-contingency stress redistribution, islanding behavior, and load shedding. A probabilistic propagation model is constructed using mode-dependent transition probabilities derived from line loading conditions. A Cascading Risk Index (CRI) is introduced to quantify the expected load shedding accumulated over cascade progression. Case studies on the IEEE 39-bus system demonstrate that the proposed framework captures diverse cascading routes under multiple initiating outages and identifies critical propagation patterns that are not revealed by N-1/N-2 screening. The results highlight the importance of SHS modeling in assessing cascading risk and providing a scalable framework for resilience evaluation in modern power systems.

0.34

Quantifying the Sampling Frequency Invariance of Time-Series Foundation Models for Sensor Data Applications

cs.LG cs.AI ·2026-11-10 ·Sourish Gunesh Dhekane, Abinaya Kumar, Torsten Woertwein, Yan-Bo Lin, Thomas Ploetz +1 more
unusual similarity 0.42
Abstract

Time-Series Foundation Models (TSFMs) are increasingly used in sensor applications, where sampling frequency (SF) varies across sensors, devices, and operating modes (e.g., power saving). Ideally, TSFMs must remain effective during such SF changes, provided the SF retains task-critical bandwidth. In this paper, we stress-test 4 prominent TSFMs: MOMENT, Chronos-2, Moirai-MoE, and TimesFM, to quantify their SF-invariance and investigate whether their behavior tracks the resulting loss of information bandwidth rather than the SF value itself. Our stress-test probes 3 dimensions: (i) the shift in embeddings, (ii) the degradation in forecasting performance, and (iii) the degradation in downstream performance, quantified by three novel metrics: FSI, FDI, and CDI, respectively. To our knowledge, this is the first study to place SF-invariance at the core of TSFM evaluations. Our results characterize: (i) how SF-invariance depends on the margin between signal's native-SF and the bandwidth its task requires, (ii) how much of that invariance the choice of TSFM explains, and (iii) how much of TSFM's performance degradation under a lower SF reflects information loss rather than a limitation of their abilities. These findings reframe SF-invariance as a measurable, signal-aware property of the (signal X TSFM) pair, and guide practitioners on when TSFMs display SF-invariance.

0.24