CS Paper Radar

Tip Manipulation in Soft Everting Robots via Wall Retraction and Deployable Fingers

Nelson Badillo Perez, Niccolo Pagliarani, Matteo Cianchetti, Robert D. Howe

cs.RO ·submitted 2026-09-19 16:59 UTC · v1

Abstract

Soft everting robots can traverse long, confined paths by continuously growing, yet active interaction remains limited to a single tool fixed at or near the tip, unable to be repositioned on demand and difficult to reconcile with the robot's soft body. We introduce a tip-manipulation and multi-tool deployment strategy for soft everting robots based on wall retraction, implemented with a base roller assembly that independently meters membrane flow in the outer wall while a tail spool regulates growth in the internal tail section. Coordinated wall and tail actuation decouples robot length from membrane-material position, enabling membrane-mounted devices to be transported, exposed, and repositioned at selected locations near the distal tip. We pair this capability with ultralight pleated inflatable fingers integrated into the membrane, fabricated from TPU-coated nylon with an internal airtight bladder. The fingers achieve large bending at low pressures (approximately 100 degrees at 50 kPa in high-pleat designs) and generate blocking forces up to 1.9 N, while remaining limp during transport. The system demonstrates adaptive grasping across diverse household objects (21 to 550 g; 16 to 200 mm), three-dimensional object manipulation and stacking, environmentally braced extension, distal camera panning for confined-space inspection, and controlled sequential payload delivery. These results enable embodied and reversible tip manipulation for soft growing robots in cluttered and tortuous environments.

Comment
38 pages, 6 figures and supplementary information

Closest papers

Nearest neighbours by meaning across the whole index.

Adaptive Bendpoint Formation in Octopus-Inspired Soft Continuum Arms

cs.RO ·2026-10-18 ·Jessica Gumowski, Julian Finn, Krishna Manaswi Digumarti, David Howard
similarity 0.66
Abstract

Octopuses exhibit a powerful form of embodied intelligence from a highly adaptable soft body. One key mechanism is the ability to instantiate bending points at any location along the arm, which enables performant and dexterous behaviours. Taking inspiration from the octopus for its dexterity, this study focuses on changing the curvature of a tendon-actuated arm by adaptively changing the anchoring end-point along the arm. An array of inflatable shells is integrated into the arm, where inflating a shell causes an increase in friction at the location, jamming the tendon and creating a temporary new anchoring point. The novel soft actuator does not break the continuity of the arm between the actuated segment and the loose segment. Experiments show that the actuated segment has a non-constant bell-shaped curvature which is comparable to that of a real octopus arm during a reaching motion. Compared to conventional single-tendon continuum manipulators, the proposed design offers an expanded workspace and enhanced dexterity through the ability to independently shape different regions of the arm through selective curvature tuning. At the same time, it avoids the mechanical complexity typically associated with multi-segment, multi-actuator systems.

0.14

A Support-Enhanced Granular-Jamming Gripper for RL-based Grasping with Continuum Manipulators

cs.RO ·2026-09-24 ·Danyu Liu, Tianlin Zhang, Wei Chen, Wei Tang, Kecheng Qin +1 more
hot direction similarity 0.65
Abstract · 8 pages, 10 figures

Continuum manipulators provide dexterous motion in confined spaces, but structural compliance, hysteresis, and load-dependent deformation leave residual position and orientation errors that can undermine reliable contact with rigid grippers. To address this limitation, this paper presents a lightweight support-enhanced granular-jamming gripper tailored to a continuum manipulator. The gripper maintains compliance before jamming while establishing a direct load path to the continuum manipulator tip after jamming. To improve its grasping performance, we systematically designed membrane materials, particles, filling ratios, and the internal support structure, and further identify geometry-dependent grasp boundaries with respect to contact offset and object shape. Building on these results, we construct a physical manipulation system integrating the continuum manipulator, granular-jamming gripper, visual feedback, tendon actuation, and pneumatic control. We then train a reinforcement-learning-based reaching controller in a randomized simulation and deploy it on the physical system, demonstrating how positioning control and contact level mechanical adaptation can complement each other in a modular grasp-and-release task. By introducing an adaptive structure that relaxes the need for highly accurate modeling and positioning control, this work explores a design paradigm that integrates physical and embodied intelligence.

0.54

Optimize, Learn, Refine: Whole-Body Grasping and Pick-and-Throw with a Spiral Soft Robot

cs.RO ·2026-09-22 ·Marwah Basuhai, Tingcong Liu, Ibrahim Alsarraj, Yuhao Wang, Ke Wu
hot direction similarity 0.64
Abstract

Soft continuum robots can exploit distributed compliance for whole-body manipulation, but synthesizing behavior through changing contacts remains difficult. We address whole-body grasping and pick-and-throw from an initially ungrasped state through outcome-based actuation-space optimization. Grasping is quantified by tip angular sweep and body-object enclosure, while throwing further incorporates release-direction alignment and minimum release speed. These objectives allow grasping, acceleration, and release to emerge from compliant interaction without prescribing contact forces, contact locations, or body configurations. Because the resulting actuation-to-outcome mapping is nonsmooth, we utilize derivative-free CMA-ES within an optimize-learn-refine framework. CMA-ES generates solutions for sampled conditions, a task-conditioned predictor learns warm starts, and CMA-ES refines them for unseen conditions. In simulation, the method achieves 492/500 successful grasps (98.4%) and success rates of 98%, 97%, and 94% across three directional throwing trials. Learned initialization increases grasping success from 78.6% to 98.4% while reducing the median rollout count from 1184 to 816 in CMA-ES. Hardware experiments achieve a 100% grasping success rate across 50 executions and a 100% pick-and-throw success rate across 30 executions, with 10 repetitions per direction. Together, these simulation and hardware results demonstrate the effectiveness of the proposed framework across both simulated and physical whole-body manipulation tasks.

0.26

A Multi-Vine Soft Robot Enabling Accessible Working Channel and Steering

cs.RO ·2026-09-03 ·Reza Kashef, Cem Suulker, Mohammad Sheikh Sofla, Kaspar Althoefer
published similarity 0.63
Abstract · Hamlyn Symposium on Medical Robotics 2026

Soft eversion robots, also known as vine robots, have attracted growing interest for navigation and inspection tasks, including minimally invasive medical applications [1]. A vine robot consists of a thin, flexible, inextensible tube folded inward that everts and grows forward when pressurized. This tip-growth enables navigation with minimal friction, making vine robots well suited for complex environments such as the human colon [2]. While their inherent softness allows passive conforma- tion to curved pathways in confined spaces, navigation performance strongly depends on environmental inter- actions, including contact angle and the length of un- constrained deployed material [3], [4]. Sharp directional changes, such as those in the sigmoid colon, often limit passive growth and necessitate active steering. Existing solutions include distributed artificial muscles [5] or dedicated tip-based steering mechanisms [6]. In addition, many applications require payload delivery, such as sensors and tools [7], [8]. Within the ERC Synergy project EndoTheranostics, this motivates the development of vine robots capable of delivering micro- surgical tools during growth. Prior work has integrated working channels within the vine body [8], [9], but these approaches constrain tool size, introduce friction, and limit access to the environment to the robot tip. In this work, we propose a multi-vine architecture in which two vine robots are coupled to an externally integrated working channel via soft mounting tips [10]. Independent vine actuation enables active tip steering while advancing the working channel without embed- ding it within the vine bodies Figure 1. Experiments demonstrate sharp steering of nearly 90 degrees during growth, highlighting the potential of this architecture for versatile medical and non-medical applications.

0.35

Towards end-to-end co-design for one-shot printable task-specific soft robots

cs.RO ·2026-11-02 ·James Wood, André Farinha, Will Browne, Josh Pinskier, Krishna Manaswi Digumarti
similarity 0.63
Abstract

Soft robot co-design methods can jointly optimise morphology and control, but the resulting designs are often difficult to manufacture, while manufacturable approaches typically restrict actuator placement or require manual assembly. We present a simulation-based co-design framework that jointly optimises material distribution, pneumatic actuator placement and orientation, and control, while producing designs that can be fabricated monolithically using fused deposition modelling. The framework uses a differentiable 2D plane-stress Material Point Method simulator, incorporating an experimentally validated material model and an empirically derived surrogate model of a 3D-printed inflatable actuator. We demonstrate gradient-based optimisation soft robotic arms for prescribed tip trajectories. Optimised designs are transferred directly from simulation to one-shot monolithic FDM fabrication, with integrated actuators and no post-assembly. Physical experiments demonstrate that the resulting arms reproduce the behaviour predicted in simulation. This framework provides a path from task-level objectives to physically realisable soft robots while retaining substantial freedom over both morphology and actuation.

0.14

ARTiS: An Adaptive Robotic Gripper for Enhanced Tool Manipulation in Disassembly Applications

cs.RO ·2026-09-03 ·Roman Mykhailyshyn, Yukiyasu Domae, Kensuke Harada
top venue similarity 0.62
Abstract

Grasping and holding tools while using them presents a considerable challenge not only for robots but also for humans. Such a challenge is particularly noticeable in processes involving assembly and disassembly, where efficiency and consistency depend on performing rapidly adaptive tasks. Nonetheless, contemporary robotic grasping technologies that can securely manipulate tools during operation frequently have significant constraints. In this paper, introduce ARTiS (Adaptive Robotic Tool Gripper in Disassembly Systems), a novel gripper that combines the adaptability of soft grippers, the dexterity of anthropomorphic hands, and the robustness of rigid mechanisms with a soft palm and fingertips. This unique combination makes it possible to hold tools securely in a variety of situations through using active jamming in the palm and fin-ray adaptation in fingertips. Furthermore, high finger dexterity is achieved through the seven degrees of freedom design, which enables the fingertips to orient to any surface, both for automated solutions and collaborative tasks. A comprehensive evaluation was conducted using a range of conventional disassembly tools to assess the gripper's compliance, durability, and functional versatility. More information, hardware instructions, and videos at https://romanmykhailyshyn.github.io/artis/

0.30

SoTa: Soft Tactile Skins for Dexterous Manipulation

cs.RO cs.LG ·2026-10-01 ·Jingyun Yang, Baiyu Shi, Timothy Yu, Haitian Liu, Alberta Longhini +4 more
code/data similarity 0.62
Abstract · The first three authors contributed equally. Project website: https://sota-skin.github.io

A growing body of work suggests that tactile sensing gives robot policies contact information that complements vision in dexterous manipulation. However, visuo-tactile robot data remains scarce: dexterous demonstrations require teleoperating robots, which limits dataset scale. Human demonstrations are far cheaper to collect and offer a path to scale this data, but only if human and robot hands carry tactile sensors with corresponding signals. This requires sensors that conform to different hand geometries, cover the full hand, and share a common layout across embodiments. We present SoTa, a low-cost capacitive tactile skin that provides full-hand coverage on humans and robots while preserving a shared layout of 202 taxels across corresponding finger and palm regions. Our multilayer design with fabric electrodes enables in-house fabrication of thin, soft skins with customizable geometry for under $10 in materials per skin. The sensor retains over 97% of its initial response span after 10,000 loading-unloading cycles with traces retaining continuity through 1,280 tight-fist folding cycles. The shared taxel layout supports human-robot co-training with a common tactile encoder and no learned cross-sensor mapping. Across three contact-rich manipulation tasks, tactile observations improve in-distribution success over vision-only policies. With a fixed robot demonstration budget, adding human demonstrations more than doubles mean success across eight evaluation conditions, from 22.8% to 45.9%, improving success in all five out-of-distribution conditions. We plan to open-source the resources needed to fabricate and operate these skins.

0.20

Tensegrity Continuum Robots Enable Task-Adaptive Morphologies for Cooperative Behaviors

cs.RO ·2026-08-27 ·Mahmud Hasan Saikot, Sydney Spiegel, Sudheera Akalanka Kariyawasam, Andrew Stefka, Josh Chrisler +1 more
top venue similarity 0.62
Abstract · 22 pages, 6 figures, Accepted to Nature Machine Intelligence

Robots that can change their morphologies and behaviors for different tasks and environments hold great promise for adaptable, multifunctional systems. Modular reconfigurable robots (MRRs) can achieve such functionalities by docking and rearranging individual units, but most rely on rigid modules that lack structural compliance, resulting in limited capabilities. Continuum robots offer compliance through flexible backbones, yet they cannot self-reconfigure into task-adaptive multi-robot configurations. Here, we introduce an MRR that unifies the advantages of both architectures by combining a tensegrity-based compliant body with claw-based connection mechanisms. Each robot can manipulate and locomote independently, and multiple robots can self-reconfigure into different morphologies (e.g., chains, loops, branches) for cooperative manipulation and locomotion. We demonstrate the robots' capability across diverse tasks and environments, including coordinated object manipulation and transport, multimodal locomotion, and loco-manipulation in real-world scenarios. These results lay a foundation for adaptable and multifunctional robotic collectives, with broad potential applications in manufacturing, space exploration, and search-and-rescue operations.

0.34