CS Paper Radar

Laplace-Domain Beamforming for Ultrafast Plane-Wave Imaging

Martin F. Schiffner

eess.IV physics.med-pheess.SP ·submitted 2026-10-06 10:09 UTC · v1
theoryunusual

Abstract

Fourier-domain beamforming methods, such as filtered backpropagation (FBP), are beneficial in ultrafast plane-wave imaging due to their computational efficiency and high image quality. These methods use the Fourier diffraction theorem (FDT) for steered plane waves to exactly invert linear scattering models. However, these models rely on simplifying assumptions that degrade image quality. The use of linear transducer arrays, in particular, requires: (i) a two-dimensional space, and (ii) lossless tissues. Herein, Laplace-domain beamforming is proposed. This method retains the computational efficiency of the Fourier-domain methods while improving image quality for linear arrays. Specifically, the method uses a generalization of the FDT, here called Laplace diffraction theorem, to account for three spatial dimensions, finite array element heights, and lossy tissues. A phantom experiment showed that the proposed method improves image uniformity, spatial resolution, and contrast compared to FBP. Using three steering angles, the lateral and axial -6 dB-widths of wires reduced by up to 12% and 25%, respectively, while the contrast of anechoic regions improved by up to 9%.

Comment
5 pages, 3 figures, 1 table; submitted to 2026 IEEE International Ultrasonics Symposium (IUS), Raleigh, NC, USA, Oct. 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Common Offset Gathers for Efficient Multistatic Beamforming in Frequency Domain

eess.SP physics.med-ph ·2026-10-29 ·Marko Jakovljevic, Xiaohong Wang, Ion Candel, Anthony E. Samir, Kai Thomenius
similarity 0.58
Abstract · 11 pages

Frequency-domain beamformers reconstruct ultrasound images with far fewer operations than delay-and-sum (DAS). However, for multistatic synthetic aperture data, they require Fourier transforms over the full transmit-receive aperture and large amounts of memory, limiting their use for volumetric imaging. Here, we adapt common offset gathers (COG) from seismic imaging to frequency-domain beamforming: transmit-receive pairs with the same offset are beamformed independently using a bistatic formulation, holding only one offset gather in memory at a time. We combine COG with the range-Doppler algorithm (RDA) and evaluate COG RDA against DAS and conventional multistatic RDA using simulated, phantom, and in vivo acquisitions. For linear arrays, COG RDA reduced memory requirements by two orders of magnitude relative to conventional RDA and beamformed up to 25x faster than DAS, with comparable image quality. For a 32x32-element matrix array, COG RDA requires only 2-D instead of 4-D Fourier transforms, and reconstructed a volume on a GPU 32x faster and with 67x less energy than DAS. COG RDA makes frequency-domain multistatic beamforming practical for matrix arrays and power-constrained devices.

0.32

Differentiable Co-Design of Ultrasound Probe Geometry and Acquisition for Plane-Wave Imaging

eess.SP ·2026-10-12 ·Somashekhar Dehury, Mahesh Raveendranatha Panicker
code/data similarity 0.57
Abstract · 11 pages, 4 figures, 2 tables. Code: https://github.com/sdehury34/jax-ultrasound-codesign . Interactive demo: https://pulseecho.in/demos/dif…

Ultrasound image quality depends on both the probe geometry and the transmit and receive processing, but engineers usually design the two separately. Physics-based simulators (Field II, k-Wave, MUST/SIMUS) compute the radio-frequency channel data but give no gradients, so design studies must use grid or black-box searches that become slow as the number of parameters increases. We present a fully differentiable end-to-end pipeline for plane-wave ultrasound imaging, with synthetic speckle phantoms, an analytical frequency-domain RF simulator, delay-and-sum beamforming and an extensible image-quality objective. The element pitch, the transmit and receive apodization and the global speed of sound are differentiable parameters of one computation graph, so one reverse-mode pass gives their exact joint gradients. Studies of each parameter rank the design parameters: the optimized pitch decreases the grating lobes, and the speed-of-sound autofocus gives clear contrast and resolution gains. Over 15 test phantoms, the optimized pitch increases the cyst gCNR from 0.55 to 0.66 (about 20%), and the speed-of-sound correction adds a further 0.05. The lateral point-spread function agrees with Field II within about 10%, and on 49 real CUBDL plane-wave acquisitions from five institutions, the framework finds the global speed of sound with a mean absolute difference of 16.6 m/s from the published corrections and phantom speed of sound.

0.35

Physics-Grounded Objective-Conditioned Deep Beamforming for Adaptive Resolution-Contrast Control in Plane-Wave Ultrasound Imaging

eess.SP ·2026-10-05 ·Gopika Gopikrishnan, Mahesh Raveendranatha Panicker
similarity 0.55
Abstract

Plane-wave ultrasound enables ultrafast imaging but remains constrained by a receive-aperture-dependent resolution- contrast trade-off. Fine structures benefit from high spatial resolution, whereas diffuse tissue and lesions often require improved contrast and clutter suppression. These objectives favor different receive-aperture configurations, yet conventional beamformers operate at a fixed imaging point. We propose a physics-grounded, objective-conditioned deep beamformer that enables controllable image formation within a single network. From single-plane-wave channel data, the network predicts spatially varying receive-apodization weights, conditioned on the desired imaging objective through feature-wise linear modulation. The conditioning variable is explicitly tied to a physically defined receive-aperture configuration and supervised using the correspondingcoherent-plane-wave-compounding target. Differentiable, region-of-interest-aware, physics-guided quality losses further promote objective-specific resolution and contrast during end-to-end training. The model is trained exclusively on simulated channel data spanning diverse target morphologies and echogenicities, and evaluated zero-shot on the PICMUS and CUBDL datasets, including unseen probe geometries. The proposed framework generally improves upon single-plane-wave delay-and-sum reconstruction while providing objective-dependent control. On PICMUS, the proposed method improves gCNR by up to 16.8% and axial resolution by 22% compared with the reference beamforming method. Moreover, switching between the contrast- and resolution-oriented objectives enables controllable changes of up to 4.9% in lesion contrast and 11.4% in lateral resolution. Compared with the best-performing learning-based baselines, the proposed method reduces lateral full-width-at-half-maximum by 5.9% and improves generalized contrast-to-noise ratio by 6.6%.

0.29

Fourier Domain Synthesis Imaging Using A Wirelessly Coordinated Distributed Antenna Array

eess.SP ·2026-09-17 ·Sherwin K. Shiran, Jason M. Merlo, Shivanshu Ojha, Jorge R. Colon-Berrios, John B. Lancaster +1 more
similarity 0.53
Abstract

In this work we present an experimental demonstration of one-dimensional Fourier-domain imaging using a fully-digital wirelessly coordinated coherent distributed antenna array (CDA) receiver. The nodes consist of two software-defined radios (SDRs) operating with independent system clocks performing wireless time, frequency, and phase coordination without a shared reference such as the global navigation satellite system (GNSS). Two spatially separated noise sources transmit independent noise waveforms with a bandwidth of 25 MHz and a carrier frequency of 915 MHz. Two sources were positioned at angles of $-6.28°$ and $12.95°$ off broadside and imaging was performed. The two sources are clearly resolved to within $3°$ of their expected locations in both the individual and combined source measurements and demonstrating the Fourier-domain image reconstruction principle using a fully-digitally coordinated distributed antenna array.

0.23

Flexible Beamforming via Fluid Antenna Array: From Discrete to Continuous Array

cs.IT ·2026-10-25 ·Jingyuan Xu, Yuanhui Wu, Zhentian Zhang, Zaichen Zhang, Tuo Wu +4 more
similarity 0.53
Abstract · 12 pages, 9 figures. Submitted to IEEE Transactions on Wireless Communications

Fluid antenna arrays (FAAs) reconfigure their effective aperture by activating radiation ports from a dense set of candidate positions within a finite physical region, thereby offering geometry diversity beyond conventional fixed arrays. This paper studies arbitrary-direction far-field beam synthesis with a planar FAA. Since a fixed array adapts its beamforming weights on a predetermined spatial sampling structure, its ability to match desired beam patterns is limited when both the aperture and the number of active elements are constrained. To exploit the geometry diversity of the FAA, we propose a coarse-to-fine scheme that couples discrete port selection with continuous joint refinement. In the coarse stage, a fast Fourier transform (FFT) based phase retrieval step converts the amplitude-only beam specification into an aperture-compatible complex target, after which an FFT-tailored greedy method selects the active ports and least squares initializes their complex weights. In the fine stage, a projected adaptive moment estimation procedure jointly refines the continuous port positions and beamforming weights while enforcing the minimum interelement spacing. For the evaluated two-beam configuration, the proposed scheme increases the mainlobe energy fraction from 35.73% to 48.92% and reduces the peak sidelobe level from -2.30 dB to -3.83 dB relative to a fixed array with the same aperture and active-port count.

0.30

PSF-Informed Reconstruction: An Enhanced 2D Directional Filtered Backprojection Method for Cone-Beam Rotary Computed Laminography

cs.CV ·2026-10-31 ·Chengxiang Wang, Wei Yu, Baodong Liu
similarity 0.52
Abstract

Cone-beam rotary computed laminography (CL) presents a viable alternative to cone-beam CT for imaging objects with high aspect ratios. Conventional reconstruction techniques, such as CL-FBP and CL-FDK, often yield suboptimal results charac?terized by pronounced superimposition artifacts, reduced contrast,and blurred edges, primarily due to their reliance on 1D row-wise filtering along detector rows. To address these limitations and improve reconstruction quality, we proposed a novel 2D directional filtered backprojection (DFBP) method based on the point spread function (PSF). First, an exact expression for the projection process is derived by establishing the relationship between a reconstructed pixel and its corresponding projection point on the detector. Second, a revised backprojection process incorporating two weighting factors is introduced to counteract the nonlinearity inherent in conventional backprojection, leading to a simplified PSF formulation. Third, to circumvent the computational burden of 3D image space filtering,an approximate method by linearizing the coordinate relationship in Fourier space under some assumptions is developed that transfers the 3D filtering operation to the 2D projection space. This approach facilitates the derivation of a formally simple yet effective 2D direc?tional filter, which integrates a 2D von Hann window and a 2D sinc window. Experimental results demonstrate that the proposed method produces reconstructions with superior contrast, sharper boundaries,and fewer superimposition artifacts compared to CL-FBP and CL?FDK. Moreover, it enables more accurate recovery of internal structures, such as bubble defects and electronic components.

0.30

Shadow Reduction in Ultrasound Imaging Using Differentiable Simulation and Radiance Field Decomposition

cs.CV ·2026-09-24 ·Valentin Bacher, Pak Hei Yeung, Bernhard Kainz, Madeleine K. Wyburd, Nicola K. Dinsdale +2 more
similarity 0.51
Abstract · 39 pages, 19 figures, submitted to Medical Image Analysis

Acoustic shadows from bone and other highly attenuating tissues obscure clinically important structures in ultrasound. In fetal brain imaging, skull-induced artefacts disproportionately degrade the hemisphere closer to the transducer (proximal), limiting symmetric assessment of the two hemispheres. Existing correction methods require raw scanner data, impose restrictive assumptions on tissue properties, or rely on generative models that may hallucinate anatomy. We present RFlash, a physics-informed post-processing method that decomposes beamformed ultrasound images into explicit attenuation and scatter-intensity maps using a differentiable radiance-field formulation of image formation. Attenuation-adaptive re-rendering then removes the dependence of the signal at each depth on the intervening tissue, equivalent to virtually advancing the transducer into the tissue. Across 1,261 3D fetal brain volumes, 143 real 2D curvilinear abdominal scans, and 1,200 simulated 2D linear-probe liver scans, RFlash reduces shadow-related intensity differences more effectively than classical Hughes-Duck attenuation correction. For a gestational-age model trained on the distal hemisphere (further from the transducer) and applied to the proximal hemisphere, prediction error decreases by 5.1 days (40%) relative to the original images. The estimated attenuation maps also yield shadow-confidence maps that improve random-forest bone-shadow segmentation over the image alone and receive greater SHAP importance than an existing neural confidence-map baseline, suggesting greater physical consistency. RFlash requires neither hardware modification nor access to raw scanner data and supports 2D and 3D acquisitions with linear and curvilinear probes, making it widely applicable allowing clinicians to use our method on their already acquired scanners and images.

0.30

Wideband Large-Array Processing and Sparse Design for Angle Imaging

eess.SP ·2026-08-13 ·Ziyu Zhou, Wei Dai
similarity 0.50
Abstract · Submitted to IEEE Transactions on Signal Processing. 13 pages, 9 figures

This paper shows that wideband large-array processing can recover a large number of angle pixels with far fewer antenna elements. The key advantage of wideband signaling is that different frequencies induce different virtual arrays, whose union forms a virtual array with a substantially increased number of effective virtual elements. Thus, a sparse physical array can support far more spatial samples than physical antennas. Motivated by this capability, we study the recovery of angular responses across the full field of view $[-90^\circ, 90^\circ)$, discretized according to the improved angular resolution, and refer to this sensing regime as angle imaging. However, the resulting virtual array is inherently irregular, clustered, and does not automatically guarantee stable recovery. To address this challenge, we introduce a coverage criterion that estimates the number of stably recoverable angle pixels, without computationally intensive singular-value-based conditioning tests over candidate image dimensions. For systems satisfying this criterion, we theoretically establish deterministic condition-number bounds that characterize stable angle imaging. Building on this criterion, we derive non-uniform sparse array designs that minimize the number of physical antennas while maintaining recovery over the full field of view. Simulation results show that the proposed criterion provides practical guidance for stable system design, and that the resulting sparse arrays can recover substantially more angle pixels than the number of physical antennas, with representative designs supporting over ten times as many angle pixels as physical antennas.

0.12