CS Paper Radar

HF Single-Station Localization via Multimode Ray Tracing and Time-Frequency Information Fusion

Qinglin Li, Wen Liu, Yun Ning, Zhongxin Deng, Junkang He, Mingshuo Liu, Chuangjian Xia

eess.SP ·submitted 2026-10-09 13:15 UTC · v1

Abstract

High-frequency (HF) single-station localization estimates an emitter location from measured directions of arrival (DOAs) and an ionospheric propagation model. When the propagation mode composition cannot be identified from conventional direction-finding (DF) measurements, the same DF observation may produce multiple physically valid ground landing points under different propagation modes, making the location inversion ambiguous. This paper proposes a multimode time-frequency information fusion localization method (MTFIF-L).Rather than assuming a propagation mode a priori, MTFIF-L retains valid landing points generated under different propagation modes and uses repeated observations across time windows and, when available, multiple operating frequencies to progressively constrain the resulting candidate locations. Experiments on four measured HF links examine the respective roles of multimode candidate retention, cross-window processing, and cross-frequency processing. All four links yield unique location decisions. Links A--C achieve relative errors of $1.40\%$, $0.78\%$, and $3.41\%$, respectively.Link D, the only single-frequency case, also yields a unique decision from repeated temporal observations, although its post- localization error is substantially larger. Propagation-path analysis further reveals link-dependent differences in reflection layer, hop count, magnetoionic mode, and elevation angle among the ray-tracing paths associated with the measured links.Overall, the results show that repeated temporal observations can support localization within an individual frequency, while multifrequency information provides additional robustness against unreliable frequency-specific outcomes, enabling HF single-station localization under unknown and potentially coexisting propagation modes while retaining interpretable propagation information for post-localization analysis.

Comment
12 pages, 4 figures, 7 tables

Closest papers

Nearest neighbours by meaning across the whole index.

RUN-O-RAN: An O-RAN-Native Architecture Enabling Cooperative Uplink Localization

cs.NI ·2026-09-17 ·Viola Bernazzoli, Alberto Ceresoli, Ilario Filippini
similarity 0.61
Abstract · 14 pages, 13 figures

Accurate positioning is increasingly required in indoor and dense urban environments; nonetheless, satellite-based systems are not always available, and standardized 5G localization solutions remain difficult to deploy with commercial devices. This paper presents RUN-O-RAN, an O-RAN-native framework that enables network-centric uplink localization using standard Sounding Reference Signal (SRS) transmissions from commercial 5G devices. RUN-O-RAN xApp coordinates serving and neighboring base stations, enabling non-serving base stations to retrieve SRS-based uplink timing measurements that would be unavailable in conventional RAN deployments, without modifying the UE or existing 3GPP signaling procedures. The framework combines cooperative SRS collection, first-path time-of-arrival estimation, timing-advance tracking, clock-drift compensation, and multi-anchor position estimation into a complete network-side localization service. Experimental evaluation over $150,000$ SRS transmissions validates the proposed framework, achieving meter-level localization under diverse propagation conditions while revealing the impact of anchor geometry and multipath on positioning accuracy. These findings demonstrate that cooperative SRS-based localization can be realized within the O-RAN ecosystem without modifying commercial UEs, providing a practical foundation for future network-native ISAC positioning services.

0.23

Map-Free Single-Anchor Position Localization Using Multipath Uncertainty at Upper Mid-Band

eess.SP ·2026-09-08 ·Xingchen Liu, Mingjun Ying, Xinquan Wang, Dipankar Shakya, Homa Nikbakht +2 more
published similarity 0.59
Abstract · 6 pages, 5 figures. Accepted for presentation at the 2026 IEEE Global Communications Conference (GLOBECOM), Macao, China, December 2026

Future 5G-Advanced and 6G systems will exploit directional wideband channels for path-based localization, yet map-free indoor positioning remains challenging because extracted multipath components (MPCs) vary widely in localization reliability. This paper presents an uncertainty-aware map-free single-anchor localization framework using 16.95~GHz indoor directional channel measurements collected at NYU WIRELESS in Brooklyn, New York. Per-MPC angular covariance is estimated from the local consistency of neighboring pattern-de-embedded power delay profile (PDP) observations and propagated into geometric localization through weighted fusion of point-type and line-type constraints. Measurements across 20 links with TX--RX separations from 11~m to 97~m show that the proposed covariance-weighted method achieves a mean localization error of 3.86~m, a median of 2.66~m, and 70\% of links within 5~m using five retained MPCs. It outperforms the power-weighted and unweighted variants under identical point/line constraints, as well as the literature baselines. These results indicate that local directional consistency provides reliability information beyond received power alone and demonstrate a practical map-free approach for future indoor directional systems.

0.50

mmWave UE Positioning Under Blockage: Limits for ISAC-Assisted Handover

cs.NI eess.SP ·2026-10-30 ·Seyed Bagher Hashemi Natanzi, Bo Tang
similarity 0.57
Abstract

Proactive handover can save a millimeter-wave (mmWave) link before a passing body blocks it, but only if the network knows where the user is. We ask whether the radio units that serve a user can localize it accurately enough from its uplink sounding reference signals. We derive position error bounds that include synchronization and array calibration errors, with and without reflected paths known from a digital twin, and test two estimators in a ray-traced street canyon on held-out scenarios. Three findings stand out. First, with line of sight to both radio units, array calibration, not bandwidth, limits the bound. Second, blockage degrades the line-of-sight-only bound sharply, whereas known reflections keep the map-aided bound low. Third, a simple dominant-path estimator fails where it matters most: its errors grow sharply around blockage, and proactive handover becomes worse than the 3GPP baseline. A map-aided multipath tracker cuts the median error from 12 to 3.7 cm and removes this significant penalty at link margins of 15 dB and above, but does not yet beat the baseline.

0.35

LEO Doppler Matching from Power Spectrum Data with Continuity-Based Segmentation and Multi-Position Clock Offset Estimation

eess.SP ·2026-10-01 ·Gaeun Kim, Seunghyeon Park, Jongmin Park
similarity 0.56
Abstract · Submitted to ICCE-Asia 2026

Low Earth orbit (LEO) satellite Doppler measurements extracted from passive software-defined radio (SDR) spectrum data require temporal alignment with predicted satellite trajectories for reliable satellite association. In our previous framework, Doppler slope information was used during both segment generation and clock offset estimation, while the clock offset was estimated at a single coarse receiver position. This study proposes a satellite matching framework based on continuity-based Doppler segmentation and multi-position clock offset estimation to reduce these dependencies. Doppler segments are first generated using only temporal and frequency continuity, thereby separating segment generation from the slope criterion used for clock offset estimation. The clock offset is then estimated using five coarse receiver positions, consisting of one city-level nominal position and four surrounding positions, through a two-stage procedure based on slope compatibility and a combined Doppler cost. The aligned segments are subsequently associated with candidate satellites using a matching score based on the same Doppler slope and bias-removed RMSE metrics, and the resulting associations are evaluated through receiver localization. Experiments using six hours of passive Starlink/OneWeb monitoring data show that continuity-based segmentation alone did not improve receiver localization compared with slope-based segmentation under single-position clock offset estimation. However, applying the proposed multi-position clock offset estimation to the same continuity-based Doppler segments reduced the localization error from 32.99 km to 1.84 km, achieving the lowest error among the evaluated methods. The results for the evaluated dataset show improved spatial consistency of satellite associations when multi-position clock offset estimation is applied to continuity-based Doppler segments.

0.19

Turning Multipath into Positioning Information: Persistent Electromagnetic-Twin DoA Localization

eess.SP ·2026-10-29 ·Tuo Wu, Zhentian Zhang, Ye Tian, Hing Cheung So
similarity 0.56
Abstract · 13 pages, 11 figures

Reflected paths can support localization when line-of-sight (LoS) links are blocked, but their usefulness depends on how accurately the stored model predicts their directions. This paper develops electromagnetic-twin (ET) direction-of-arrival (DoA) localization with a persistent, physically calibrated path-angle field. A nominal floor plan supplies virtual-path geometry, and sparse reference probes at known positions learn a compact directional correction. Field order and regularization are selected from calibration data alone. For each user, unordered DoAs are processed by joint position estimation and one-to-one path association, using assignment-aware multistart search and robust Gauss--Newton refinement. New trusted probes update the stored correction through recursive least squares (RLS), without reprocessing all previous measurements. The analysis establishes calibration rank conditions, objective descent, and conditional information gains from reflected paths, while also distinguishing the decay of initialization bias from the convergence of localization error. Synthetic experiments use 500 queries per operating point. At 50% LoS blockage and $1.5^\circ$ DoA error, the calibrated ET achieves 0.39 m root-mean-square error, versus 0.55 m for nominal geometry. After a wall change, its final error is 0.43 m, versus 0.63 m for a frozen calibrated map. Equal-evidence comparisons show competitive calibrated alternatives and faster abrupt-change recovery with sliding-window updates than with the configured RLS. The results support reusable directional calibration, not a universally superior map or update rule, and validation is limited to synthetic first-order reflections with trusted calibration labels.

0.39

Lightweight Single-Antenna Direction-of-Arrival Estimation for Curvilinear Trajectories in Mobile Embedded Systems

eess.SP ·2026-08-12 ·Nour Zidi, Jérémie Voix, Pascal Giard, Lokman Sboui
similarity 0.55
Abstract

Accurate direction-of-arrival (DOA) estimation is valuable for spatially selective communication in noisy industrial environments. This work investigates a lightweight single-antenna framework in which receiver motion forms a virtual aperture. The receiver uses onboard inertial measurement unit (IMU) headings and two-way-ranging (TWR) measurements to a known fixed beacon, avoiding GPS, optical tracking, and high-precision external tracking of the mobile receiver. The curvilinear virtual-array MUSIC formulation is evaluated numerically using phase-coherent narrowband snapshots over arbitrary trajectories. Hardware experiments validate a range- domain TWR-IMU bearing estimator using corrected and averaged ranging observations. In a campaign of 100 consecutive four-revolution sweeps, all trials are retained. Phase-aligned accumulation recovers a 123 mm range-modulation amplitude, in close agreement with the measured 120 mm antenna lever arm. The single-sweep bearing precision is 8.2° absolute world-frame accuracy is limited by systematic BNO055 magnetometer drift in the motorized setup. The embedded bearing-estimation computation consumes 144.9 mJ per estimate, approximately 3 % of the measured cycle energy in the tested configuration. These results establish the feasibility of onboard range-domain bearing estimation and motivate future experimental validation of phase-coherent MUSIC during free-form mobile trajectories.

0.04

Ray-Traced Augmentation for Signal Strength Based Localization

cs.NI ·2026-08-24 ·Jihoon Og, Ningze Sun, Ioanis Nikolaidis, Omid Ardakanian
similarity 0.54
Abstract · 28 pages

Indoor localization based on Wi-Fi typically relies on extensive collection of real-world received signal strength (RSS) fingerprints, making deployment costly and time-consuming. We present a ray-tracing-based framework that reduces this reliance by generating synthetic RSS fingerprints from a building model. We first calibrate the building model using a small amount of real RSS fingerprints through Bayesian optimization, followed by per-access-point calibration to account for residual errors in simulated RSS values. The calibrated model is then used to generate a large augmented dataset of synthetic RSS fingerprints at arbitrary locations. To effectively exploit these data for localization, we introduce novel binary and multivalued representations of RSS values and a ResNet-based localization architecture that supports cross-band fusion of 2.4 and 5 GHz measurements. We evaluate our localization method on a real campus building against a diverse set of four baselines. When trained exclusively on synthetic data, the proposed method with multivalued representation and upstream cross-band fusion achieves a mean localization error of 3.05m on a real-data test set, outperforming the best baseline by 33.6%. The results demonstrate that calibrated ray-tracing-based simulation can substantially reduce the need for real RSS fingerprints while enabling accurate deep-learning-based indoor localization.

0.13

Positioning with Flexible Reflectors: Solution and Performance Analysis

cs.IT ·2026-08-14 ·Jiajun He, Han Yu, Danyan Lin, Gaofeng Pan, Hing Cheung So +2 more
publishedtheory similarity 0.54
Abstract

Flexible reflectors (FRs) have emerged as a low-cost and energy-efficient solution for reshaping electromagnetic propagation environments across a wide range of applications. This paper investigates FR-swarm-assisted target localization in scenarios where line-of-sight (LoS) paths are unavailable. By leveraging the virtual LoS paths created by the FRs, a simple yet accurate estimator is proposed for localization under severe blockage conditions. To characterize the performance limits of the proposed scheme, we derive the Cramer-Rao lower bound (CRLB) and use it to optimize the positions and orientations of the FRs. Furthermore, by accounting for random FR deployment, we characterize the CRLB distribution and reveal how different network configurations affect localization accuracy. Simulation results demonstrate that the developed scheme closely approaches the CRLB performance, while the derived analytical results provide useful guidelines for FR deployment and network design.

0.17