CS Paper Radar

Extending Wire-Driven Parallel Robots to Multi-Floating-Link Systems with an Inter-Body Wire

Shintaro Inoue, Kento Kawaharazuka, Temma Suzuki, Sota Yuzaki, Keita Yoneda, Kei Okada

cs.RO ·submitted 2026-10-12 04:46 UTC · v1
top venue

Abstract

Parallel wire-driven systems are a framework in which multiple wires are connected to an end effector, and the end effector is driven by the tensions of those wires. Because they can transmit large forces, up to the breaking strength of the wires, over lengths on the order of several tens of meters, they can realize powerful actuation in large workspaces. In recent years, studies have also investigated connecting wires to external environments such as trees and columns and forming parallel wire actuation on site. However, conventional parallel wire-driven systems often assume a single end effector, and because of interference between wires and links in a shared workspace, it has been difficult to handle multiple floating links simultaneously. In this study, we realize multi-floating-link parallel wire actuation by introducing an inter-body wire. In real-robot experiments, the two bodies supported and lifted a mannequin and transferred it onto a stretcher as a rescue motion. This shows that parallel wire actuation can be extended from a single end effector to a multi-floating-link system, and indicates its potential for broader tasks such as the manipulation of large objects and rescue support.

Comment
Accepted to IEEE Robotics and Automation Letters, website: https://shin0805.github.io/twinx_multi_floating_link/
Journal ref
IEEE Robotics and Automation Letters, vol. 11, no. 10, pp. 11314-11321, October 2026
DOI
10.1109/LRA.2026.3723331

Closest papers

Nearest neighbours by meaning across the whole index.

Suspended-Fabric Robotic Manipulation Surfaces: Modelling, Design Space, and Multimodular Extensio

cs.RO ·2026-10-30 ·Pratik Ingle, Jørn Lambertsen, Kasper Støy, Andres Faiña
similarity 0.61
Abstract

Robotic Manipulation Surfaces (RMS) reposition objects by deforming the surface on which they rest. A recent class of RMS suspends a continuous fabric sheet from a sparse grid of vertical linear actuators lowering the actuator density of such surfaces but how to design such surfaces so that objects can be controlled everywhere on it, and how to extend it beyond a single module so that objects can pass between modules and achieve parallel, remain open. This paper presents a separable catenary model of the suspended sheet that is fast to compute and provides both the surface shape for given actuator heights and the actuator heights for a desired local slope. The closed form inverse lets a simple PID controller position objects on the sheet, and the model relates fabric length, module span and actuator stroke to the reachable workspace, yielding a minimum fabric length bound and design charts for these surfaces. The approach is then extended to a multimodular platform in which neighbouring modules share actuators. On a $2 \times 2$ prototype, we demonstrate that centimetre-scale objects are transferred between modules and positioned within 0.03 m over a $1 m^2$ workspace with only nine actuators, enabling multi-object manipulation and opening the way to parallel manipulation.

0.21

Detachable Wire Drive : Reconfigurable Robot Architecture with Shared Actuators

cs.RO ·2026-08-16 ·Takahiro Hattori, Kento Kawaharazuka, Kei Okada
published similarity 0.60
Abstract · Accepted at IROS2026, website - https://hatofly.github.io/detachable-wire-drive/

Reconfigurable robots offer significant potential for adapting to diverse tasks; however, conventional centralized architectures often require dedicated actuators for each module, leading to substantial increases in overall system weight, volume, and cost. To address these challenges, this paper presents the "Detachable Wire Drive," a reconfigurable robotic system that enables the sharing of heavy and expensive actuators across various morphologies. The core of this system is the "Wire Detach Unit," a mechanism designed to physically split and reconnect wire drive paths, allowing motors to be consolidated into a common base unit. We demonstrate the versatility of this approach by developing a 2-DOF rigid arm, a continuum arm, and two distinct grippers, all of which are interchangeably attached to, and driven by, a single shared actuator set. Experimental results validate the mechanical reliability of the detachment process and the control framework's ability to seamlessly manage transitions between configurations, highlighting a path toward more efficient and multi-functional robotic systems.

0.39

Design of a Fully Actuated 4-DOF Robotic Finger With Joint-Specific Hybrid Remote Actuation

cs.RO ·2026-10-07 ·Hyojae Kang, Hyun-mok Jung, Joonho Lee, Dongil Park, Hyunmin Do +2 more
similarity 0.54
Abstract · 10 pages, 10 figures. This manuscript has been submitted for possible publication

This paper presents a fully actuated 4-DOF robotic finger using a joint-specific hybrid remote-actuation architecture. The metacarpophalangeal (MCP) joint is driven by two coordinated rigid-link transmission sets, whereas the proximal interphalangeal (PIP) and distal interphalangeal (DIP) joints are independently actuated by closed-loop wire transmissions incorporating circular rolling-contact joints (RCJs). A larger transmission radius is used at the PIP joint than at the DIP joint. The RCJ wire geometry maintains the total wire-loop length during joint rotation, and the DIP wire routing is designed so that PIP motion does not affect its differential actuation for a fixed MCP configuration. The distal wire transmission, MCP linkage, and fingertip kinematics are analytically modeled. In experiments, the transmission behavior was quantitatively evaluated from the ball-screw displacements measured using ArUco-marker tracking. MCP actuation produced measurable displacements of the PIP and DIP transmission units, whereas isolated PIP and DIP actuation with the MCP fixed supported the intended mechanical decoupling between the distal transmissions. The mean peak fingertip forces under isolated MCP, PIP, and DIP actuation were 21.28 N, 9.22 N, and 5.75 N, respectively. The resulting finger postures were also examined using objects of different geometries and sizes.

0.38

Making Waves: A Membrane-Coupled Delta Array for Manipulating Objects Below the Actuator Spacing

cs.RO ·2026-09-30 ·Bailey Dacre, Andrés Faíña, Oliver Kroemer, Zeynep Temel
theory similarity 0.54
Abstract

Distributed manipulator systems manipulate objects through the coordinated motion of many actuators. However, an object must be supported by several actuators at once, so the centre-to-centre actuator spacing imposes a hard lower bound on manipulable object size. We remove this bound by coupling the end-effectors of an 8 x 8 array of three degrees-of-freedom delta robots with a stretchable fabric, turning 64 discrete contacts into a continuous surface capable of manipulating objects smaller than the actuator spacing. Viewing the array as a displacement field over that surface, we investigate local quasi-static and cyclic fields as manipulation primitives. These primitives can be applied globally across the array or locally confined around each tracked object to independently manipulate several objects in parallel. We then train a policy acting on low-order discrete cosine transform coefficients: at equal action dimension, commanding a nineteen-delta neighbourhood halves the placement error of commanding the whole array. The policy transfers to hardware without adaptation at 76% success. The platform manipulates objects from 15mm-90mm, a six-fold range spanning both sides of the actuator spacing, 43.3mm, on a single surface.

0.21

SHAFT: A Slack-Compensating, Helical-Buckling-Attenuating Flexible-Shaft Transmission for Lightweight Multi-DoF Manipulation

cs.RO ·2026-09-19 ·Tomoya Takahashi, Moses Gladson Selvamuthu, Richiro Tadakuma, Kazutoshi Tanaka
published similarity 0.53
Abstract · 9 pages, 14 figures, submitted as proceedings of IROS2026

Lightweight and slim manipulators enable safe operation in human living environments. Proximal actuation using remote transmission mechanisms, such as wire-driven or Bowden cables, effectively reduces inertia and arm size by relocating motors near the base and transmitting torque to distal joints. Existing approaches either increase mass through additional components, such as pulleys for direction changes, or suffer from reduced transmission efficiency due to friction losses. Flexible shaft transmission avoids both mass increase and excessive friction losses, but faces increasing angular transmission error due to helical buckling caused by slack generated at joint bending. To address this problem, we propose SHAFT: a Slack-compensating, Helical-buckling-Attenuating Flexible- shaft Transmission mechanism. This mechanism compensates for slack through a proximal tensioner, improving the angular transmission error and efficiency of flexible shaft transmission without increasing the moving mass of the arm section. In a transmission path containing four 90-degree bends, the proposed mechanism demonstrated approximately 30% higher efficiency and approximately 65% lower angular transmission error compared to a flexible shaft transmission without a tensioner. Using this mechanism, we fabricated a 6-Degree-of-Freedom (DoF) arm with a 1-DoF gripper manipulator consisting of a rotary module housing motors with a tensioner, and a 280 g weight for the arm module. The proposed manipulator represents a novel remote actuation system for achieving lightweight construction with high efficiency, contributing to the acceleration of safe robot deployment in human environments.

0.42

Body-Grounded Replanning for Physically Adaptive Manipulation

cs.RO ·2026-09-24 ·Namiko Saito, Hiroshi Kera
similarity 0.53
Abstract

Manipulation requires not only reasoning about the external environment, but also about the robot's physical condition. A strategy may remain geometrically feasible while becoming physically unsuitable due to increased joint load or limited mobility, yet internal physical state is typically used only for low-level control. We propose body-grounded high-level replanning, which uses internal physical state to adapt manipulation strategies during execution. Body-state events trigger strategy replanning, and an LLM interprets the underlying joint-level state, recent execution statistics, and execution history to select a context-dependent alternative, while leaving the task objective and low-level controller unchanged. We evaluate the framework on a reaching task under controlled load and asymmetric mobility constraints in simulation and on a real robot. Our experiments show that body-grounded replanning maintains high task success while reducing physical effort and enabling more efficient strategy adaptation. Additional contact-rich manipulation experiments demonstrate the applicability of the same replanning interface beyond reaching. These results show that internal physical state can inform not only low-level control, but also high-level decisions about how a manipulation task should be performed.

0.27

The Cartesian Hand: In-Hand Manipulation with All-Linear Fingers

cs.RO ·2026-09-22 ·Boxi Xia, Bokuan Li, Ryan Shin, Zijiang Yang, Jiaxun Liu +1 more
code/datahot direction similarity 0.51
Abstract · 9 pages, 7 figures

Robotic manipulation has increasingly pursued human-like dexterous hands with many articulated degrees of freedom, offering rich manipulation capabilities at the cost of mechanical and control complexity. At the other extreme, parallel grippers are simple and robust, but provide little ability to manipulate an object after grasping it. Operating articulated objects such as threaded containers, manufacturing tools, and laboratory instruments often requires a second gripper, an external fixture, or coordinated arm motion. We introduce the Cartesian Hand, a 7-DoF end-effector that rethinks dexterous manipulation by combining independent grasping and relative manipulation within a single end-effector using only linear motion. Two independently actuated parallel grippers hold different parts of an object, while four translating fingertips generate relative motion between the grasped parts. Its configuration-independent fingertip kinematics allow manipulation to be composed from simple linear motion primitives. The Cartesian Hand is particularly suited to objects structured around common mechanisms such as threads, pivots, linear guides, plungers, and triggers. We demonstrate cap opening and closing, pipetting, pumping, two-handle manipulation, screwdriving, trigger actuation, and in-grasp reorientation across 35 objects spanning laboratory, manufacturing, and household settings. The same manipulation procedures transfer from a fixed-base robot arm to a humanoid, where we demonstrate bimanual laboratory manipulation using two Cartesian Hands. These results show that versatile in-hand manipulation capability can emerge from a mechanically simple architecture when independent grasping and relative motion are designed directly into the end-effector. We will open-source all software and hardware design. Our website is https://generalroboticslab.com/cartesian_handv1.

0.41

RoboCompiler: Graph-Native Compilation of Closed-Chain Robots for Consistent Modeling, Control, and Simulation

cs.RO ·2026-09-28 ·Mehdi Heydari Shahna, Joongheon Kim, Jouni Mattila
code/datahighly cited similarity 0.51
Abstract · GitHub: https://github.com/Mehdi-Heydari-Shahna/RoboCompiler

Robots with kinematic loops, coupled actuators, and changing contacts require consistent models of configuration, motion, force, and dynamics. Yet these interfaces are often reconstructed separately for control and simulation, making closure and actuation consistency difficult to maintain. This paper presents RoboCompiler, a graph-native framework that compiles a canonical mechanism graph into a shared mechanical interface. From bodies, joints, frames, inertias, and actuator ports, it constructs closure paths and analytic residual Jacobians, then assembles feasible configurations through rank-checked continuation and correction. A tangent lift maps independent velocities to full robot and task motion, while paired actuator-port maps preserve virtual work. A constraint-curvature correction extends the reduction to accelerations and projected rigid-body dynamics, including floating-base and support modes. Cycle-local evaluation, generated Jacobians, and dependency-aware reuse enable localized updates when closure inputs change. We evaluate physical loops and task-induced constraints on a industrial excavator, Unitree Go2, Franka Panda, Kangaroo, and a six-UPS Stewart platform. High-precision constrained-dynamics and independent Pinocchio checks confirm mechanical consistency; MuJoCo and Isaac Sim/PhysX executions demonstrate task performance and model reuse under native contact. For Kangaroo, compilation reduces residual-and-Jacobian evaluation time by 96.7% and closed-loop rollout wall time by 66.8%, with dynamics and control held fixed.

0.53