CS Paper Radar

Design and implementation of thermal control strategy for micro-size lunar exploration rover hakuto

Toshiki Tanaka, Takuto Oikawa, Keeni Shruti, Teruhito Iida, Kazuya Yoshida, John Walker

cs.RO ·submitted 2026-10-20 12:35 UTC · v1
unusualhighly cited

Abstract

The research focuses on the thermal interface design of the HAKUTO Rover Flight Model (FM) and its evaluation using the final thermal vacuum experiment. Initially, an analytical thermal model was developed, dividing the rover into six distinct radiating surfaces. The surface temperature of the rover was then determined based on its orientation relative to the solar radiative flux, as well as other thermal factors such as lunar radiation, solar albedo, and conduction from the lunar regolith. By considering the impact of these heat sources, suitable mounting locations for the avionics and the angle of the solar panels were determined to optimize the rover's thermal performance and power generation while ensuring the rover's mass remained under 4 kg. After the preliminary thermal analysis, numerical computational simulations were conducted to further elaborate on the thermal response of the final HAKUTO Rover FM design, which was then verified through a thermal balance test in a vacuum environment.

Comment
69th International Astronautical Congress (IAC), Bremen, Germany, 1-5 October 2018

Closest papers

Nearest neighbours by meaning across the whole index.

Emergent Cooperative Thermoregulation in Lunar Swarm Robotics

cs.RO cs.MA ·2026-10-22 ·Anais Jeger, Harry Holt, Lennart Puck
theory similarity 0.58
Abstract · 7 pages, 4 figures. Submitted to IEEE Robotics and Automation Letters. Video in ancillary files

Swarms of small robots are an attractive way to survey lunar caves and lava tubes. Missions such as NASA's CADRE will fly cooperating rovers for distributed mapping, but only in daylight. The 354 h lunar night drops the surface towards 95 K, and the radioisotope heaters that let single rovers survive it cannot be supplied at swarm scale. In this study we investigate whether a swarm can instead use its own members as thermal shielding. We train one policy, shared by all twenty robots, by reinforcement learning with an evolution-strategies estimator. The policy receives a single reward, once, at the end of the night: the mean temperature of the five coldest robots. Nothing in that reward refers to position, spacing, exposure or motion. Two behaviors nonetheless emerge. The swarm aggregates, and robots circulate between the sheltered core and the exposed rim, the same pair of behaviors with which emperor penguins survive the Antarctic winter. We measure the survival threshold, the smallest stored energy per robot at which every robot is still alive at sunrise. Across ten runs it is 155.6 +/- 1.3 pcm-h, where one pcm-h is 7.2 kJ of stored heat. That is 37% below a motionless huddle and within 13% of a physics-based lower bound, and at a budget where the motionless huddle loses six robots, every robot survives. The behavior needs no shared spatial reference and no robot-robot contact, and transfers from twenty robots to forty without retraining.

0.36

Design and Experimental Validation of the Separation and Deployment System for the CHERI Lunar Micro-Rovers

cs.RO ·2026-11-02 ·Ahmet Mustafa Kangal, Oğuzhan Şahan, Teoman Efe Aycan, Görkem Egemen Güloğlu, Halil Ersin Söken +3 more
unusual similarity 0.51
Abstract · 21 pages, 15 figures, journal paper

Reliable separation mechanisms are critical for planetary micro-rovers, which must withstand launch vibrations and then eject the vehicle clear of the lander. This paper presents the design, optimization, and testing of the separation system of the CHERI (Challenging Environment Exploration Rovers for Intelligence) lunar micro-rovers. Sized for a 5 kg vehicle, the assembly comprises an aluminum ground plate, a central non-explosive hold-down and release mechanism, and an asymmetric four-spring ejection array. Initial separation trials revealed a velocity deficit caused by energy absorption in the flexible wheel-legs and chassis during the ejection stroke. This loss was represented as equivalent chassis damping in a multi-body dynamic model, and the springs were re-optimized accordingly. Early hardware iterations failed vibration testing, first through spring jamming in the guide housings and then through a 34 Hz fundamental mode of the flat ground plate. A density-based topology optimization raised the fundamental frequency to 84 Hz, above the 70 Hz requirement of the lander, within a 1.6 kg mass budget. The final configuration passed acceptance-level sinusoidal vibration, random vibration, and shock testing without structural degradation. Separation tests with a weight-matched one-sixth mass model, tracked by optical motion capture, confirmed clearance of the lander and reproduced the simulated free flight to within the run-to-run variation of the measured ejection velocity. These tests further showed that landing outcome is dominated by touchdown and settling dynamics, indicating that the residual pitch rate is the main controllable design parameter and confirming self-righting recovery as an integral element of the deployment architecture.

0.32

Integrated Design and Reproducible Feasibility Analysis of a Four-Wheel Rover with Packet-Commanded Imaging, LiDAR Ranging, and Learning-Assisted Target Recognition

cs.RO ·2026-10-27 ·Sabik Bin Sultan, Shafi Bin Sultan, Safwan Sadad, Aranya Abeer Khan Prapya, Maria Sultan
benchmark similarity 0.47
Abstract · Research Manuscript for NASA HERC 2027

This study develops an integrated, reproducible design assessment for a four-wheel educational rover intended for the high-school remote-control division of the 2027 NASA Human Exploration Rover Challenge. The architecture combines commercial differential drive control, independently sprung wheel carriers, separate drive and task batteries, and a Raspberry Pi-based subsystem that executes received imaging and ranging commands. The analysis reconciles component lists with dimensioned computer-aided design views, derives mobility and electrical constraints, and connects sensor geometry to command execution. At the estimated mass of 10.919 kg, a 215 mm wheel rotating at 200 RPM produces a theoretical rolling speed of 8.105 km/h; consequently, the nominal motor label does not establish compliance with an 8 km/h design ceiling. A steady 20-degree climb requires at least 1.255 newton-meters per wheel under an assumed rolling-resistance coefficient of 0.10 and equal torque sharing. At 50 ft, an ideal 12-inch feature spans approximately 71 pixels across a full-resolution Camera Module 3 Standard image, while a 1-degree pointing error displaces the ranging ray by approximately 266 mm. An executed synthetic benchmark compares color-geometry rules and two linear support-vector classifiers on 2,400 generated board crops with scene-disjoint evaluation. A separate reference command executor is checked using mocked hardware. These software results and analytical sensitivities support a testable development plan; the study does not report physical rover trials. The principal contribution is a traceable connection between component choices, failure mechanisms, quantitative design limits, and reproducible verification tasks.

0.18

MARE: An Open-Source Lunar Rover Simulator with Shadow Ground Truth for Perception and Autonomy

cs.RO ·2026-10-20 ·Raúl Castilla-Arquillo, Miguel Olivares-Mendez
code/data similarity 0.46
Abstract · 10 pages, 16 figures, 3 tables. v2: adds a dataset with segmentation and depth baselines. Code: https://github.com/raulcastar/MARE-Lunar-Sim…

Lunar surface exploration increasingly relies on autonomous rovers that must perceive and traverse unstructured terrain under extreme illumination conditions. Near the lunar poles, low sun elevations produce long, high-contrast shadows that challenge stereo vision, terrain segmentation, and localization. Developing perception and navigation algorithms for these conditions requires large amounts of sensor data with accurate ground truth, which field campaigns and analog facilities can only provide at high cost and with limited variety. This paper presents MARE (Modular Autonomy and Rendering Environment), an open-source simulation suite for lunar rover perception and autonomy built on Unreal Engine 5 and ROS 2. MARE consists of three integrated components. Terrain Studio generates cratered and rocky lunar Digital Elevation Maps (DEMs) to build simulation scenes. A dedicated Unreal Engine project hosts two physics-based rovers with plugins for stereo, lidar, event, and Single-Photon Avalanche Diode (SPAD) cameras, streaming time-stamped sensor data and pixel-accurate ground truth. Lastly, a Guidance, Navigation, and Control (GNC) stack provides web-based mission control. Validation shows a mean Intersection over Union (IoU) of 0.79 between predicted and rendered shadows at low sun elevations, and stereo depth analysis verifies decreased pixel coverage in shadowed regions relative to sunlit terrain.

0.28

Zephyron: Integrated Design and Analytical Evaluation of a Solar-Assisted Mobile Manipulator for Multimodal Environmental Reconnaissance and Distributed Visual Inference

cs.RO ·2026-09-22 ·Sabik Bin Sultan, Shafi Bin Sultan, Safwan Sadad
similarity 0.45
Abstract

Environmental reconnaissance needs mobile platforms that carry sensors, preserve measurement context, and return interpretable evidence under limited energy and communication. We present a literature-informed engineering design for Zephyron, a four-wheel rover with a front manipulator, environmental sensors, distributed computer vision, local recording, and a raised rear solar module. The design keeps the prototype layout but replaces unsupported numerical assumptions with an explicit component and geometry baseline. A reproducible search retrieved 5,000 records (4,858 unique) for screening, followed by targeted review of primary literature and manufacturer documentation. The baseline uses 165 mm wheels, a 12 kg mass budget, a 72 Wh battery-energy basis, and a 20 W photovoltaic module. With rolling-resistance coefficient 0.04, steady ascent of a 10 degree grade needs about 0.517 N m per wheel under equal load sharing. An illustrative 40 W motion load gives 1.44 h from 57.6 Wh usable energy, and a 25 percent driving duty gives 4.19 h without solar input; these are calculated scenarios, not measured performance. Sensor models show how integration time, calibration, temperature, and communication delay constrain interpretation, and a quality-aware stop-and-sample policy links these constraints to mission execution. Lightweight detectors, reference-based sensor learning, and executable data-integrity checks define a reproducible machine-learning evaluation pathway. The contribution is a traceable design and evaluation framework with editable 3D models, subsystem diagrams, and reproducible analytical data. Experimental validation is required before assigning payload, endurance, detection, or field-operating ratings.

0.21

Toward Lunar Legged Robots: Field Deployment Lessons at LUNA

cs.RO ·2026-10-08 ·Adrian Fuhrer, Joseph Church, Oliver Fischer, William Talbot, Nicolas Faesch +4 more
similarity 0.45
Abstract · Proceeding to the IEEE iSparo Conference 2026

Legged robots are promising candidates for future lunar surface missions because they can traverse steep, loose, and obstacle-rich terrain that challenges conventional wheeled rovers. However, readiness for lunar deployment is limited by uncertainties in foot-regolith interaction, dust generation, illumination-driven perception degradation, and operational constraints. This paper reports lessons from the 2025 LUNA analogue campaign, where ANYmal-D and Magnecko traversed loose regolith simulant and crater-like terrain and collected long-horizon navigation and visual-inertial data under challenging lighting. We show that quadrupedal robots can traverse regolith simulant, but performance is affected by sinkage and slip, dust-generating contacts, and perception failures caused by overexposure, shadows, and low-texture regions. These results motivate tighter integration of regolith-aware locomotion policies, illumination-robust perception, repeatable analogue testing, and mission-level operational validation for future lunar legged robots.

0.22

Robot-Assisted Deployment and Maintenance of Inflatable Modules for Lunar Habitation: A Field Demonstration

cs.RO ·2026-09-28 ·Kentaro Uno, Shamistan Karimov, Ashutosh Mishra, Elian Neppel, Hazal Gozbasi +3 more
published similarity 0.44
Abstract · Author's version of a manuscript accepted at the International Conference on Space Robotics 2026 (iSpaRo 2026). (c) IEEE

Long-term human habitation and in-situ development on the Moon open a new era of space utilization. In this context, robots are a key technology for facilitating the construction of future human outposts. Toward the deployment and establishment of human habitation modules on the lunar surface, we propose a combined system consisting of inflatable modules and a modular, reconfigurable robotic system. This paper presents a report demonstrating various robot-assisted task executions using real hardware, namely the modular and reconfigurable robot MoonBot and the inflatable module HIDAS, to enhance the reliability of their deployment and maintenance. The demonstrated tasks include robotic inspection during inflation, module position alignment, final safety locking, and three-dimensional mapping for post-deployment maintenance. All demonstrations were conducted either in a laboratory environment or at a lunar analogue test site. Finally, lessons learned are discussed to provide essential insights for this robotic application to future lunar habitation.

0.34

Simulation for Planetary Robotic Perception and Autonomy: A Concise Survey of Recent Capabilities and Gaps

cs.RO ·2026-09-28 ·Hoyun Kim, Giseop Kim
publishedsurvey similarity 0.44
Abstract · 8 pages, 5 figures, 3 tables. Accepted for publication at the 2026 International Conference on Space Robotics (iSpaRo)

Planetary robotics is an important enabler of scientific exploration in environments where direct human-in-the-loop operation is costly, hazardous, or infeasible. However, developing and validating planetary robotic systems remains difficult because representative field testing is expensive, limited, and often unrepeatable under mission-relevant conditions. In this setting, simulation serves as a central tool for perception and autonomy research, synthetic data generation, system integration, and pre-deployment evaluation. Despite its importance, the literature on planetary robotics simulation remains dispersed across different simulation engines, implementations, and application settings. This paper surveys simulation works for planetary robotic perception and autonomy across four practical axes: Openness and Availability, Scenario and Platform Coverage, Sensor and Perception Support, and Environmental and Operational Realism. The surveyed simulation works report visual or physical fidelity and support perception-oriented workflows. They also indicate uneven public availability, rover-centered coverage, partial support for specialized sensing modalities, and uneven reporting of operational constraints such as onboard computation, energy, and communication restrictions.

0.38