CS Paper Radar

Geometry-Dependent Properties of Physically Crosslinked PPy-PVA Hydrogels Enable Tunable Iontophoretic Drug Delivery

Heather Jin Hee Kim, Mohsen Alishahi, Kyuin Park, Mikaila K. Roncevich, Larissa M. Shepherd, Cara M. Nunez

cs.RO physics.med-ph ·submitted 2026-10-22 17:10 UTC · v1
top venueunusual

Abstract

Objective: Iontophoretic drug delivery has primarily relied on current modulation to regulate drug transport. Here, we investigate hydrogel geometry, microstructure, and local electric fields as alternative mechanisms for controlling transdermal delivery. Methods: Bovine serum albumin (BSA) was encapsulated in polypyrrole-polyvinyl alcohol (PPy-PVA) hydrogels. Five geometries, including Hilbert curve-based designs, were fabricated to vary pore architecture and local electric field distributions. We optimized PPy content, drug loading, and current density. Electric fields were evaluated using finite element analysis, and microstructures were characterized by scanning electron microscopy. Drug transport was assessed using Franz diffusion cells with artificial membranes. Results: Hydrogel geometries exhibited distinct microstructures and electric field distributions. Iontophoresis substantially enhanced permeability compared with passive diffusion, while individual geometries produced different cumulative release, flux, and permeability profiles. The average iontophoretic permeability was (3.80 +/- 1.93) x 10^-5, exceeding previously reported values using artificial membranes. Conclusion: Geometry-driven fabrication of drug-loaded hydrogels enables tunable transport characteristics under both iontophoretic and passive conditions. Significance: Geometry-mediated control offers an alternative approach to regulating iontophoretic drug delivery without requiring individual current-density modulation.

DOI
10.1109/TBME.2026.3744496

Closest papers

Nearest neighbours by meaning across the whole index.

Accelerating the Development of PLGA In Situ Forming Depots Through AI-Driven Multi-Objective Optimization

cs.LG cs.AI ·2026-10-06 ·Pauric Bannigan, Siddarth Chandrasekaran, Brigitte A. G. Lamers, Inge Hermsen, Gary Tom +4 more
unusual similarity 0.47
Abstract · 10 pages; 7 figures

Developing long-acting injectable formulations requires the simultaneous optimization of drug loading, release kinetics, viscosity, injectability, stability and other objectives. To navigate this multidimensional space, Corbion and Intrepid combined Corbion's diverse PURASORB bioresorbable polymer library with Intrepid Labs' proprietary AI algorithm (ANDROMEDA 1) to develop in situ forming depots for a therapeutic peptide. Over approximately 15 weeks, 181 unique formulations spanning drug loadings of 6-12% w/w were prepared and characterized through broad design-space mapping and targeted multi-objective optimization. Four lead candidate formulations were identified at 6%, 9%, and 12% w/w drug loading. Each met the predefined viscosity and injectability criteria while providing distinct 30-day in vitro release profiles. The study evaluated polymers spanning a broad range of molecular weights, including commercially available PURASORB grades and new polymers under development by Corbion to expand its polymer toolbox. ANDROMEDA 1 identified that polymers with intermediate molecular weights provided a favorable balance between sustained release and solution viscosity. Together, these findings demonstrate how integrated polymer expertise and AI-driven optimization can rapidly identify differentiated formulation candidates, focus the development space, and establish a strong data-driven foundation for further optimization and in vivo evaluation.

0.30

Electrospun Fields: 3D Nano-Fiber Material Computation as Design Method

cs.GR cond-mat.softcs.RO ·2026-08-24 ·Wai Lok Wan, Ayah Mahmoud, Sergio Mutis, Avantika Velho, Annie Xing +1 more
publishedcode/dataunusual similarity 0.47
Abstract · 15 pages, 10 figures. Published in Proceedings of the ACM on Computer Graphics and Interactive Techniques (SIGGRAPH 2026). Open-source hardw…

We present a robotic electrospinning platform and design method for depositing nanofiber membranes onto non-planar, three-dimensional conductive geometries. Conventional electrospinning relies on fixed emitters and planar grounded collectors, which restricts deposition to flat substrates: on concave geometries, field shielding prevents fibers from reaching recessed regions, and material bridges across elevated features instead. We address this with a custom end-effector integrated with a six-axis UR20 arm. The tool carries a localized stepper-driven syringe pump that maintains consistent polymer flow independent of orientation, and routes high-voltage DC (up to 25 kV) directly to a robot-mounted needle, turning the arm into a mobile emitter with full kinematic control over position, orientation, working distance, and traversal velocity. Toolpaths that continuously reorient the emitter along surface normals give access to concave topologies unreachable by fixed-axis systems. We characterize the resulting deposition behavior in two parts. A catalog of four bio-compatible polymer systems (PEO, PVA, keratin-PEO, silk-PEO) establishes the operating envelope, reporting deposition speed, jet stability, fiber size, alignment, and durability for each. A taxonomy of 3D-printed conductive scaffolds spanning geometric primitives, hybrid compositions, and square, triangular, and hexagonal lattices links collector geometry to fiber alignment, density, and cross-void bridging. We also demonstrate programmable grounding, in which selectively energized pins in an array steer deposition without changing physical geometry. Assembly instructions and toolpath-generation code are released as an open-source repository.

0.49

HDR-DTCP: High-Dynamic-Range Differential Tissue-Coupled Wireless Powering for Tunable Biphasic Stimulation in Injectable Implants

eess.SP eess.SY ·2026-11-14 ·Asif Iftekhar Omi, Anyu Jiang, Han Wu, Sultan Mahmud, Mali Halac +4 more
similarity 0.42
Abstract

Next-generation implantable neurostimulators require efficient wireless power delivery in smaller, less invasive form factors, yet variations in tissue coupling, implantation conditions, and stimulation loads can alter received power (or requirements) and degrade energy-harvesting performance. This work presents high-dynamic-range (HDR) differential tissue-coupled powering (DTCP), termed HDR-DTCP, a body-coupled architecture in which noninvasive differential electrodes establish an AC electric field in tissue and a thread-like implant extracts power from the longitudinal potential gradient for on-chip harvesting and stimulation. Distributed coupling along the implant length, rather than receiver cross-section, enables minimally invasive injectable geometries, with harvested power scaling with implant length. A 65-nm complementary metal-oxide-semiconductor (CMOS) prototype integrates a reconfigurable four-stage energy harvester with automatic stage selection and a tunable constant-current biphasic stimulator, achieving 63.5\% peak power-conversion efficiency (PCE) at $-16.3$ dBm and $>50\%$ PCE over a 9-dB input-power range. Preliminary in-vivo validation of DTCP was done with a second application-specific integrated circuit (ASIC) on an injectable flexible substrate, capable of being delivered through a 14-gauge needle adjacent to the sciatic nerve of Sprague-Dawley rats (n=4). External copper-pad DTCP powering evoked repeatable hind-limb twitches and electromyography (EMG) response; ultrasound confirmed sub-millimeter nerve proximity, video-based paw-tip tracking captured the response, and 8-day post-implant dissection verified placement along the sciatic-nerve trajectory. Overall, this work provides an integrated wireless powering, energy-harvesting, and stimulation platform toward fully battery-free injectable neuromodulation implants.

0.27

AI-guided robotic in situ fabrication of curvature- and tissue-adaptive wireless bioelectronics

cs.RO ·2026-11-13 ·Hiroyuki Tetsuka, Jiaju Ma, Naomi Kumano, Minoru Hirano
similarity 0.42
Abstract

Personalized bioelectronic devices for wound therapy require not only conformal fabrication on complex body surfaces but also functional adaptation of their electrical characteristics to individual wound geometries. Here, we present an AI-guided robotic in situ printing platform for fabricating wireless wound electrotherapy devices directly on transparent wound dressings. The system integrates a 3D vision camera, a six-degree-of-freedom robotic arm, direct-ink-writing, and geometry-aware RF design optimization. AI-based wound segmentation is used to determine wound dimensions and local surface curvature, while the reconstructed three-dimensional geometry is incorporated into the electromagnetic design of the receiving coil and interdigitated electrodes. In contrast to conventional approaches that use surface geometry only for trajectory generation, the proposed method accounts for both anatomical curvature and tissue dielectric loading to compensate for geometry-induced shifts in resonant behavior. A printable silver ink was characterized in terms of rheology, dimensional reproducibility, electrical resistance, and electromechanical stability, and was used to fabricate multilayer wireless devices directly on curved polyurethane dressings. Wireless power transfer, impedance characteristics, and electric-field delivery were evaluated experimentally and numerically. Finally, robotic in situ fabrication was demonstrated on an anthropomorphic tissue-equivalent forearm phantom, where the measured dielectric properties of the phantom were incorporated into the RF optimization, enabling resonant operation near the target frequency of 25 MHz. This work establishes a perception-to-design-to-fabrication framework for geometry-adaptive wireless bioelectronics and provides a technological foundation for future physical-AI-enabled manufacturing of personalized on-body electrotherapy devices.

0.29

A neural density functional for polymer electrolytes with exact structure and transferable Coulomb coupling

cs.LG cond-mat.softmath.NA ·2026-10-08 ·Liyao Lyu
similarity 0.40
Abstract

Ion correlations set the structure of polymer electrolytes and depend on the host permittivity, which is low and varies between polymers. A functional that carries these correlations from molecular simulations to larger inhomogeneous systems must transfer across domain sizes, geometries and coupling strengths. We introduce a neural density functional for the ions of a salt-doped polymer melt with built-in integrability, continuous spatial symmetry, the Noether identities, perfect screening in stable bulk states, and parameters that refer to no grid or box. The permittivity enters only through the Bjerrum length, an explicit argument constrained by an exact relation: the free-energy derivative with respect to the Bjerrum length is the Coulomb correlation energy. Trained by force matching on planar profiles at five Bjerrum lengths spanning 8-30 monomer diameters, the functional predicts, without retraining, density profiles in fourfold longer boxes and under two-dimensional fields, bulk structure factors and the long-wavelength number response, also at a concentration and a permittivity left out of training. It reproduces this energy identity on Coulomb energies that never enter the training. Its nonlinear density dependence captures correlations that a quadratic pair closure misses: the number response grows several-fold with concentration, and at low concentration the coupling lowers it through ion association, below the ideal value at the strongest coupling, while the host sets it in the concentrated melt. At fixed coupling, it is more accurate than three neural architectures and loses little accuracy with a quarter of the training data.

0.24

A dynamic pore-network model with discrete microbubble transport

cs.CE physics.flu-dyn ·2026-10-07 ·Kristoffer Skjelanger, Anna Mareike Kostelecky, Maziar Veyskarami, Timo Koch
unusual similarity 0.40
Abstract · 32 pages (+11 in supplementary) and 20 figures (+18 in supplementary)

We develop a hybrid pore-network model (PNM) for discrete microbubble transport coupled to connected two-phase flow in porous media. We apply the model to simulate flow in the porous transport layer of a rotating proton exchange membrane (PEM) electrolyser. At sufficiently large apparent gravitational forces, bubbles growing at the catalyst layer can detach at sizes smaller than the characteristic pore size and move through liquid-filled pores via buoyancy and advection. The model couples a dynamic two-phase PNM to a Lagrangian bubble tracker. Pore-scale Stokes simulations in square throats provide closures for the bubble buoyancy velocity, the hydraulic resistance of bubble-occupied throats, and the reciprocal coupling between liquid flow and bubble motion. Verification tests assess conservation, pressure-flow coupling, bubble growth, advection, merging, trapping, and transfer to the connected gas phase. The network simulations show that increasing apparent gravitational forces shifts a larger fraction of the produced gas toward discrete-bubble transport. The increase mostly comes from a reduced detachment radius, which decreases bubble size and lets them move more freely through the network.

0.33

Numerical Simulation of Transdermal Insulin Delivery Using a Coated Microneedle in a 2D Skin Model

cs.CG ·2026-09-16 ·Milana Tesfamarian, Michael Heisig, Gabriel Wittum, Rolf Krause
unusual similarity 0.39
Abstract

In this work, we present a computational model to investigate transdermal insulin delivery using coated microneedles. A detailed skin geometry incorporating a coated microneedles was developed to analyze insulin release through the different skin layers and to evaluate the influence of key transport parameters. The model represents the major skin layers: the stratum corneum, viable epidermis, and dermis. Unstructured grids were used to achieve a reliable resolution of the model. The simulations provide insights into the permeation of insulin from the coated microneedles and the transport and distribution across the different skin layers. Finally, the simulation results were compared with experimental data to evaluate the predictive capability of the model.

0.26

Influence of the branching geometry on SPION propagation: coupling of experiment and simulation

cs.ET q-bio.QM ·2026-11-10 ·Daniel Fleischhauer, Luiz C. P. Wille, Stefan Lyer, Jens Kirchner, Dietmar Drummer
unusual similarity 0.38
Abstract · 6 pages, 4 figures; submitted to IEEE ICC for review; Funded by DFG - GRK2950

Magnetic Drug Targeting (MDT) is an emerging therapeutic concept in cancer medicine, where superparamagnetic iron oxide nanoparticles (SPIONs) are used as carriers for medication. Their magnetic properties allow for the manipulation of particle transport within the vascular structure and thus targeted delivery to the tumor site. To develop effective concepts for particle steering and accumulation, a detailed understanding of the particle--flow interaction, especially at asymmetric vascular bifurcations, is needed. Based on hierarchical scaling laws, generalized bifurcation geometries with varying degrees of asymmetry were derived and additively manufactured. The particle distribution was investigated by in situ optical measurements under different flow conditions and magnetic field configurations and compared with Lagrangian particle and Volume of Fluid Simulations (VoFS). While the particle mass partition followed the hydraulic flow split in asymmetric bifurcations, density-driven stratification dominated in the symmetric bifurcation, where one daughter branch received only a minor fraction of the particle mass at low flow rates despite carrying half of the flow. The Lagrangian model reproduced the predominantly advective propagation, whereas only the VoFS approach captured the stratification-induced asymmetry. Magnetic actuation counteracted the stratification, reversed the passive branch preference and increased particle retention. From a molecular communication perspective, bifurcation geometry, collective volume effects and magnetic actuation thus jointly determine the received particle signal at vascular bifurcations.

0.30