CS Paper Radar

Modeling Fat-shift for Improved Head Segmentation from MRI Scans using a Probabilistic Model

Merle Diedrichsen, Koen Van Leemput, Douglas N. Greve, Oula Puonti, Axel Thielscher

cs.CV ·submitted 2026-10-31 19:44 UTC · v1
unusual

Abstract

Personalized computational head models for biophysical simulations rely on accurate whole-head segmentations from T1-weighted (T1w) magnetic resonance imaging (MRI) scans. While T1w scans provide excellent contrast for intracranial anatomy, extracerebral tissues have partly almost no signal (compact bone) and also suffer from the so-called chemical shift artifact, which affects the fatty tissues in MRI and causes them to spatially shift in the frequency encoding direction of the scan. This artifact occurs primarily in two structures of the head: the spongy bone, a fatty compartment inside the compact bone, and the subcutaneous fat, located directly underneath the skin. The frequency-encoding direction is often set in the superior-inferior direction, causing the fatty tissues to shift down and, as a result, making the skull appear thinner than it actually is. Existing segmentation methods do not model this artifact, consequently leading to inaccurate labeling of the skull and scalp, which introduces a bias in biophysical simulations. The direction and magnitude of the fat-shift can be determined from the scan parameters, thus making it possible to explicitly model the shift and to recover the correct anatomy. This study introduces a probabilistic model that uses variational inference to segment head and brain structures from a T1w scan while accounting for the fat-shift artifact. The proposed Fat-shift-informed Label Optimization of the Whole head (FLOW) method reconstructs extracerebral anatomy more accurately than a fat-shift-agnostic segmentation approach while maintaining high segmentation accuracy in all other structures. FLOW-based fat-shift corrected segmentations significantly reduce bias in electric field simulations compared to a segmentation method that does not model the shift.

Closest papers

Nearest neighbours by meaning across the whole index.

Mechanical behaviour of the intact brain-skull interface under tension, compression and shear

cs.CE ·2026-11-12 ·Sajjad Arzemanzadeh, Karol Miller, Ron Kikinis, Adam Wittek
similarity 0.58
Abstract

The brain-skull interface governs the boundary/contact conditions of the brain in computational head models, yet its mechanical behaviour remains poorly characterised experimentally. We characterised the brain-skull interface by testing brain-skull complex samples (skull bone, meninges and brain tissue in their native arrangement) excised from 19 sheep cadaver heads under uniaxial tension and compression at strain rates of 0.002, 0.02 and 0.2 s$^{-1}$ and simple shear at 0.02 s$^{-1}$. Histology confirmed that the meningeal layers remained intact and attached to the brain and skull after excision. We acquired magnetic resonance images of every sample, reconstructed their geometry and developed a sample-specific finite element model of each experiment. We represented the brain tissue using a second-order Ogden hyperelastic model and the brain-skull interface using a cohesive zone model. Using inverse finite element analysis, we first calibrated the brain tissue parameters for each subject. Keeping these parameters fixed, we then identified the interface parameters from the corresponding brain-skull complex specimen. The brain tissue shear modulus increased with strain rate from 0.94 $\pm$ 0.16 kPa at 0.002 s$^{-1}$ to 1.60 $\pm$ 0.30 kPa at 0.2 s$^{-1}$. In contrast, the interface properties (maximum normal traction 2.35 $\pm$ 0.81 kPa, maximum tangential traction 4.14 $\pm$ 0.97 kPa, and fracture energy 0.35 $\pm$ 0.14 N m$^{-1}$) showed no significant dependence on strain rate or loading mode. In all samples, failure occurred within the subarachnoid space. Neither a rigid brain-skull connection nor frictionless sliding contact with separation reproduced the measured mechanical response or failure mode of the brain-skull interface. Our experimentally derived cohesive zone model provides a realistic representation of the brain-skull interface for computational head models.

0.32

Automated Distinction of Intimal and Medial Intracranial Arterial Calcification from CT Head

eess.IV cs.CV ·2026-09-11 ·Benjamin Jin, Maria del C. Valdés Hernández, Richard Bortsov, Joanna M. Wardlaw, Daniel Bos +1 more
publishedcode/data similarity 0.51
Abstract · Accepted at the Stroke and neurovascular diseases Workshop on Imaging and Treatment CHallenges @ MICCAI 2026

Intracranial arterial calcifications (IACs) are a common finding on clinical non-contrast enhanced head CT scans and are associated with neurovascular disease. Calcifications can occur in the intimal or medial layer of the arterial wall, subtypes that differ in aetiology and may have distinct clinical relevance. These subtypes can be visually distinguished by radiologists based on the shape of the calcifications. We investigate three automated approaches for subtype classification of IAC from head CT-derived segmentation masks: (1) an automated adaptation of the established radiological visual score, (2) a sphericity-based method, and (3) a method based on shape embeddings extracted by a medical shape foundation model. All approaches use the same lightweight classification pipeline on top of the features they compute and are evaluated using 5-fold cross-validation. The three methods achieved comparable performance, with the embedding-based approach yielding the best overall results with a weighted F1 (mean $\pm$ SD) of up to 71.5 $\pm$ 3.7 for a single artery and 59.8 $\pm$ 1.7 for the joint artery classification. Performance was largely preserved when using automated instead of manual IAC segmentation masks, and we found the difference in weighted F1 not significant. Our results show that fully automated IAC subtype quantification from head CT is feasible and remains robust to the use of manual and automated IAC segmentation masks. Code at https://github.com/bjin96/iac-subtyping.

0.45

TRACE: Artifact-Robust Statistical Shape Modeling from Imperfect Surface Scans - A Case Study in Craniosynostosis 3D Photography

cs.CV cs.AI ·2026-08-22 ·Sanjay Bhandari, Nawazish Khan, Alzbeta Novotna, Tiffany Jeong, Loretta Bowman +5 more
published similarity 0.50
Abstract · Accepted at ShapeMI workshop at MICCAI 2026

Craniosynostosis severity analysis increasingly relies on statistical shape models (SSMs) to quantify cranial morphology, but most existing workflows depend on computed tomography or heavily curated three-dimensional (3D) photographs. Raw clinical 3D photographs provide a radiation-free and repeatable alternative, yet often contain shoulders, hands, hair, clothing, scanner noise, and incomplete boundaries that corrupt correspondences. We introduce the Template-constrained Robust Artifact-aware Correspondence Estimation (TRACE) framework, an unsupervised method for constructing SSMs directly from artifact-contaminated clinical 3D head photographs. TRACE predicts sparse anatomically corresponding head-surface control points from the raw point cloud, refines them through a coarse-to-fine Surface-Aware Deformation cascade, and uses thin-plate spline warping to deform a clean template mesh into a subject-specific head reconstruction. This template-constrained formulation keeps dense correspondences on clinically relevant head anatomy while suppressing non-head artifacts. The correspondence module is decoupled from the point-cloud encoder, enabling the same deformation pipeline to be paired with different backbones, including PointNet, DGCNN, and Point Transformer V3. Across all backbones, TRACE substantially improves surface sampling, topology preservation, and shape-model quality over prior SSM methods, providing a scalable foundation for photograph-based craniosynostosis shape analysis and a framework that may extend to other artifact-contaminated surface scans when an appropriate clean template is available.

0.42

Synthetic training for long-tail haemorrhagic lesion segmentation in data-scarce settings

cs.CV ·2026-10-01 ·Yuan Cao, Sumeet Dash, Antonia Zachariadis, Stefanie Schreiber, Katja Neumann +1 more
published similarity 0.48
Abstract · Accepted: MICCAI 2026 SASHIMI workshop

Cerebral microbleeds (CMBs) and cortical superficial siderosis (cSS) are imaging markers of cerebral small vessel disease, but their automated segmentation is limited by the scarcity of positive cases and voxel-level annotations. We propose a synthetic training framework for long-tail haemorrhagic lesion segmentation that requires no real lesion annotations for training and leverages radiological description of the lesions. Starting from anatomical brain parcellations, the framework applies spatial augmentation and voxel resampling, procedurally inserts cSS and CMB labels using clinical priors on lesion location and morphology, and synthesises images through randomised intensity assignment, blurring, and Rician noise simulation. Models were trained on dynamically generated image-label pairs and evaluated against manual delineations in 10 cSS cases and 13 CMB cases. The proposed configurations outperformed classical filter baselines. For cSS, the hypointensity constrained model achieved higher AUPRC and AUROC than the Frangi filter (AUPRC: 0.284 vs 0.083; AUROC: 0.907 vs 0.731). For CMBs, explicit synthesis of blood vessels as lesion mimics improved performance over the classical baseline (AUPRC: 0.538 vs 0.004; AUROC: 0.999 vs 0.968). These results support our proposal as a feasible strategy for data-scarce haemorrhagic lesion segmentation.

0.39

Automated carotid artery atherosclerotic inflammation segmentation in PET using MSR-Net

cs.CV physics.med-ph ·2026-10-11 ·Ran Li, Abhinav K. Jha, Jie Zheng, Richard Laforest, Yongjian Liu +6 more
published similarity 0.47
Abstract

Objective. To develop an automated method for segmentation and uptake quantification of carotid atherosclerotic inflammation on 64Cu-CANF-comb PET while accounting for partial-volume and tissue-fraction effects. Approach. Synthetic carotid PET images with known fractional-volume ground truth were generated by combining MR-derived high-resolution activity maps with GATE Monte Carlo simulation incorporating major PET physical processes and matched to the Biograph mMR acquisition and reconstruction. A two-stage network first localized the carotid vessel wall from T1-weighted MR and then estimated voxel-wise inflammation fraction from masked PET. Both stages used a multiscale residual (MSR) convolutional backbone. Performance was compared with U-Net, Transformer U-Net, DUCK-Net, and iterative Yang partial-volume correction. Main results. In a two-alternative forced-choice study, five nuclear-medicine physicians identified real images with 54% accuracy (54/100; Wilson 95% CI 0.44-0.63; exact binomial p = 0.48). On 184 simulated test slices from five held-out patients, the proposed method achieved a weighted DSC of 0.79, compared with 0.73 for U-Net, 0.69 for Transformer U-Net, and 0.75 for DUCK-Net, with corresponding HD values of 1.85, 2.29, 2.32, and 2.23 voxels. Patient-cluster bootstrap comparisons favored the proposed method for DSC and HD against all three baselines (Holm-corrected p <= 0.031). Overall ENRMSE was 0.24 versus 0.59, 0.68, and 0.59 for the three DL baselines and 0.57 for iterative Yang. In seven patients, corrected SUV showed a positive association with MR-derived lipid-rich/necrotic core with hemorrhage. Significance. The proposed framework improved carotid PET segmentation and uptake quantification under simulated conditions. The patient analysis is preliminary and requires external validation with biological reference standards before clinical deployment.

0.33

Tensor-based Brain Surface Modeling and Analysis

cs.CV q-bio.NC ·2026-09-03 ·Moo K. Chung, Keith J. Worsley, Steve Robbins, Alan C. Evans
top venuehighly cited similarity 0.47
Abstract

We present a unified computational approach to tensor-based morphometry in detecting the brain surface shape differences between two clinical groups based on magnetic resonance images. Our approach is novel in a sense that we combined surface modeling, surface data smoothing and statistical analysis in a coherent unified mathematical framework. The cerebral cortex has the topology of a 2D highly convoluted sheet. Between two different clinical groups, the local surface area and curvature of the cortex may differ. It is highly likely that such surface shape differences are not uniform over the whole cortex. By computing how such surface metrics differ, the regions of the most rapid structural differences can be localized. To increase the signal to noise ratio, diffusion smoothing based on the explicit estimation of Laplace-Beltrami operator has been developed and applied to the surface metrics. As an illustration, we demonstrate how this new tensor-based surface morphometry can be applied in localizing the cortical regions of the gray matter tissue growth and loss in the brain images longitudinally collected in the group of children.

0.74

Multiple Myeloma Lesion Segmentation on Whole-Body Diffusion-Weighted Imaging via Efficient Anatomical Anticipation and Multimodal Confirmation

cs.CV cs.AI ·2026-09-05 ·Mengmeng Zhang, Shengqian Huang, Junde Zhou, Xiaoping Wu, Hao Luog +10 more
similarity 0.47
Abstract

Whole-body diffusion-weighted imaging (WB-DWI) is widely used for multiple myeloma (MM) assessment, yet automated lesion segmentation remains challenging due to limited anatomical delineation and the low specificity of marrow hyperintensity. Existing studies have introduced bone region-of-interest (ROI) information and apparent diffusion coefficient (ADC) maps to mitigate these ambiguities, but practical limitations remain. Bone ROI construction often relies on costly manual annotation, image registration, or dedicated bone models, while ADC is usually incorporated only through simple channel fusion, limiting its ability to provide complementary structural and lesion-discriminative cues. To address these limitations, we propose a two-stage framework for MM lesion segmentation on WB-DWI. In the first stage, we train a bone ROI generation model from ADC images without dedicated bone labels, providing an efficient and practical anatomical prior for lesion analysis. In the second stage, we propose Anatomy-guided Multimodal U-Net (AMU-Net), which leverages ADC in a manner consistent with clinical lesion assessment rather than treating it as a generic auxiliary modality. Extensive experiments demonstrate the effectiveness and practicality of the proposed method. It achieves the best overall performance among the evaluated methods, with a mean Dice score of 76.2%.

0.21

Spatially and Compositionally Controlled Multimodal Glioblastoma MRI Synthesis with Latent Diffusion

cs.CV ·2026-11-04 ·Steven Glass, Max Van Puyvelde, Marija Pizurica, Mia Meyer, Olivier Gevaert +1 more
similarity 0.46
Abstract

Glioblastoma exhibits substantial heterogeneity in tumour morphology and composition across MRI modalities, often making available clinical datasets highly unbalanced in terms of patient pathologies. We propose a two-stage latent diffusion model (LDM) framework for the generation of explicitly controllable 2D glioblastoma MRI scans. First, a segmentation LDM generates tumour maps conditioned on location, spatial extent, axial position, and subregion composition. Second, a modality-conditioned LDM with ControlNet generates T1, T1Gd, T2, and FLAIR images adhering to the requested segmentation. On a held-out test set, generated segmentations achieved a mean centroid error of 0.842 pixels and a subregion proportion error of 0.795 percentage points. ControlNet improved Fréchet inception distance (FID) across all four modalities, reducing pooled FID from 42.59 to 36.12. An expert reader study yielded mean quality ratings of 6.60 for real images, 6.83 for ControlNet-generated images, and 6.77 for fully synthetic images.

0.20