CS Paper Radar

Parameterisation of NMC and LFP 4680 cells for electrochemical and thermal modelling

Remus Teodorescu, Nicolai A. Weinreich, Berke Bilgin, Yi Zhuang, Wenzel Prochazka

eess.SY cs.CEphysics.chem-ph ·submitted 2026-11-01 14:18 UTC · v1
code/dataunusual

Abstract

An electrochemical-thermal model of the 4680 cylindrical cell is presented: a Doyle-Fuller-Newman model of the electrode stack coupled to a two-node thermal balance of the roll and the can (a thermal DFN, TDFN), solved by an implicit finite-volume scheme. Two cells are parameterised from teardown geometry and open literature, with every value tagged by provenance: the Tesla NMC811/graphite tabless cell and the BYD FC4680 LiFePO4 multi-tab cell. The reaction heat is evaluated at the open-circuit potential of the particle-mean concentration, which restores the heat of mixing. Both sets are calibrated in the same way, with the test fixture identified from the measurement alone. Against the 1C and 2C charge test of Ank et al., the calibrated NMC set follows the mean can temperature within 0.52 and 1.46 K, with a contact heat of 0.94 mOhm matching the authors' estimate for their holder. For the LFP cell, 1C and 2C discharges to 2.0 V were measured on the authors' bench; the fixture conductance (0.337 W/K) follows from the energy balance and the heat capacity (277 J/K) from the cooling. With the end-of-lithiation drop of LiFePO4 restored in the cathode open-circuit potential, the calibrated set follows the can temperature within 0.44 K (1C) and 0.76 K (2C), reproduces the peaks and the relaxation after cut-off. What remains is what a single can node and a single representative particle do not describe: the axial gradient of the NMC can under contact heating, and a gradual decline of the LFP voltage before the knee at 2C, which points to the distribution of particle states in the electrode. The parameter sets (BPX, CSV) and the bench data are openly available.

Comment
36 pages, 6 figures, 4 tables; supplementary material included. Submitted to Frontiers in Batteries and Electrochemistry. Data: https://github.com/RemusTeodorescu/4680-cell-models

Closest papers

Nearest neighbours by meaning across the whole index.

Thermal-Mass Coupled Modeling and Optimal Scheduling of Aluminum Smelting Loads for Safe Demand Response Participation

eess.SY ·2026-10-27 ·Yan Shen, Ruike Lyu, Shuoqi Wang, Jing Dai, Hongye Guo +1 more
top venue similarity 0.43
Abstract · Accepted for publication in IEEE Transactions on Smart Grid. DOI: 10.1109/TSG.2026.3736640. This is the author-accepted manuscript

Aluminum smelting loads (ASLs) offer substantial flexibility potential, yet their actual participation in demand response remains conservative owing to the risk of operational failures. Power adjustments disturb the electrolyte temperature and superheat, which may lead to electrolyte freeze-out or yield loss. Existing ASL demand response methods often rely on oversimplified dynamic models of the electrolytic cell's thermal behavior, such as linear models and the Equivalent Thermal Parameter (ETP) model, which may either violate temperature constraints or underestimate the available flexibility. To address this limitation, this paper proposes a Thermal-Mass Coupled (TMC) dynamic model. The model captures the essential physical mechanisms of electrolytic cells, including alumina feed dynamics, ledge phase-change dynamics, and state-dependent current efficiency. The resulting nonlinear relations are reformulated into a tractable mixed-integer linear programming (MILP) model using Taylor approximations and McCormick-envelope reformulations. In the illustrative PBDR and IBDR case studies, the nonlinear reference-model assessment shows that the TMC model achieves net economic improvements 122.4% and 325.1% higher, respectively, than the ETP model. The proposed framework can therefore support deeper demand response participation by aluminum smelters while explicitly assessing adherence to operational safety constraints.

0.45

When voltage sensors fail: Electrochemically constrained fault-tolerant state estimation for flat-plateau LFP batteries

eess.SY eess.SP ·2026-10-05 ·Feng Guo, Luis D. Couto, Hamid Hamed, Khiem Trad, Dong Zhang +3 more
published similarity 0.42
Abstract · Published in Energy Storage Materials, Volume 91 (2026), Article 105553. This is the authors' accepted manuscript. Please cite the Version o…

The flat voltage plateau of lithium iron phosphate (LFP)/graphite cells makes electrochemical-state errors and voltage-measurement abnormalities produce similar innovations, complicating state-of-charge (SOC) estimation. This work proposes an electrochemically constrained residual-bias compensation dual extended Kalman filter (RBC-DEKF) with uncertain-initialization commissioning. A thermal control-oriented parameter-grouped single-particle model (CPG-SPMT) provides paired-electrode dynamics and terminal-voltage prediction, while a separately configurable voltage-discrepancy state accommodates systematic residuals. When the initial SOC is uncertain, residual adaptation is suspended over a verified-healthy startup window. Buffered data support electrochemically constrained trajectory matching, followed by calibrated state replay and residual-channel reactivation. Frozen cross-cycle healthy-residual calibration supports commissioning and remains in the voltage prediction after handover. Evaluation covers 216 additive-bias and 168 multiplicative-gain profiles over 24 A123 temperature-drive-cycle trajectories. Relative to Single-EKF, the original RBC-DEKF reduces mean SOC RMSE from 7.646 to 0.170 percentage points for additive bias and from 22.646 to 0.356 percentage points for gain faults. Separately, 18 nonzero-initial-error profiles on three representative 50%-SOC-anchored segments give a full-record mean SOC RMSE of 1.747 percentage points, including startup, for the commissioned realization, versus 11.192 and 11.400 for the always-on RBC-DEKF and conventional joint EKF. Representative delayed bias, 10-s ramp, and gain tests show that the corrected SOC trajectory remains stable after fault introduction. The central contribution is electrochemically constrained temporal coordination of uncertain-state recovery and subsequent voltage-discrepancy accommodation.

0.66

Characterization, ageing and post-mortem dataset of commercial 58Ah prismatic NMC cells

eess.SY ·2026-10-16 ·Róbinsón Medina, Alessio A. Lodge, Feye S. J. Hoekstra, Steven Wilkins, Damian Cupid +8 more
similarity 0.41
Abstract

This paper provides an extensive dataset for commercial 58 Ah prismatic NMC cells. The dataset comprises three types of data: characterization, ageing, and cell teardown. Characterization data include tests such as GITT, HPPC, and EIS, among others. Ageing data were obtained from 41 cells subjected to 38 distinct ageing conditions, including application-surrogate drive cycles. Recurring reference performance tests and EIS measurements track the evolution of each cell. Teardown data were obtained from pristine and aged (post-mortem) cells. They include material analyses and half-cell measurements. This single dataset supports analytics, model development (both machine-learning and physics-based), benchmarking, and techno-economic analysis. Several example analyses are carried out to show the usability of the data. For instance, the paper shows how lithium stripping can be detected from the voltage response of a short discharge applied after each charge. The data and the processing and analysis scripts are openly provided alongside this paper.

0.20

The conductance filtration: sink-relative persistence and exact edge sensitivity for heat transport in particle-filled composites

cs.CE cond-mat.mtrl-scicond-mat.dis-nn ·2026-09-25 ·Daisuke Yasufuku
unusual similarity 0.39
Abstract · 45 pages, 15 figures. Japanese-language version: https://doi.org/10.5281/zenodo.22760047

We formulate the thermal conductance $g_e$ of a particle pair as three branch types -- contact, near-contact and bond -- within a single construction, and we introduce the filtration that takes this $g_e$ as its axis (the conductance filtration) together with persistence taken relative to the sink boundary. We then show that the dissipation share is exactly the logarithmic sensitivity of the effective conductance, and that a finite change of a single edge is predicted exactly in closed form. The allocation of the dissipation among branch types, and the idealisation ratio of each mechanism (interface, matrix and particle), are thereby obtained as diagnostic quantities on one and the same graph representation.

0.41

Estimating the Health and State of Charge of Each Cell in a Second-Life Battery System from Field Data

eess.SY ·2026-09-03 ·Martin Cornejo, Julian Meyer-Schwickerath, Juan Victor Sandalinas, Andreas Jossen
benchmark similarity 0.38
Abstract · 35 pages, 9 figures, includes supplementary material (10 pages, 9 supplementary figures, 2 supplementary notes). Code and data: https://doi.…

Effective use of battery storage depends on reliable estimation of its state of health (SOH) and state of charge (SOC). Model-based state estimation requires the open-circuit voltage (OCV) curve, which is typically unknown for second-life batteries. We present a framework that jointly estimates the states and parameters of an equivalent circuit model solely from field operation data, using Gaussian process regression to reconstruct the OCV curve. Applied to a real second-life battery system of 27 modules and 324 cells, it reveals SOH heterogeneity, a systematic SOC imbalance, and two faulty cells, all validated against a reference measurement. We aggregate the cell SOH and SOC to module level and benchmark them against a lumped-module model fitted without the individual cell voltages. The lumped-module model follows the average behavior and cannot capture the limiting cells, overestimating SOH by up to 31% and SOC by up to 23%.

0.27

Rapid Heat Removal from Chip Cores: Near-Junction Active Cooling of Power Transistors via Electron Entropy Transport and Spatial Decoupling

eess.SY math-ph ·2026-11-09 ·Xiangying Li
unusual similarity 0.38
Abstract · 10pages

Chip performance is limited by a shared bottleneck: the core produces heat faster than it can be moved out. We study the hardest case, RF power GaN HEMTs, whose hotspots exceed 5 kW/cm^2, and propose a horizontal near-junction active cooling topology built on electron entropy transport. Classical on-chip thermoelectric cooling faces a contest: Peltier absorption grows linearly with current, Joule heating with its square. In a vertical pillar, its own conduction resistance locks about half the Joule heat back toward the cold end, capping net cooling. From the Onsager framework we show the origin of this asymmetry: Peltier absorption localizes at the interface where the Seebeck coefficient jumps, whereas Joule heating fills the volume. The topology exploits this: a thermoelectric thin film lies flat on a diamond substrate beside the device drain (the electron exit), so bulk Joule heat leaves vertically into the substrate. A lateral fin model gives a closed form for the recirculation factor gamma: the vertical pillar yields gamma = 1, while the horizontal film yields gamma_max = sqrt(2) L_z/L_x, about 0.03 for L_z = 10 um, L_x = 500 um. The decoupling scales the net cooling ceiling and the critical runaway current by roughly 1/gamma. At equal resistance, the same film lifts maximum cooling from 13 mW to 500 mW, and the critical current from 0.65 A to 24 A. A time-constant and linear stability analysis with temperature-sensitive parameters defines the working window and safety margins for microsecond pulse cooling. The architecture leaves the device structure untouched; the principle, absorb at an interface and extract bulk heat vertically, applies to any chip with a hot core and offers a reproducible design path for near-junction thermal management.

0.28

Binder migration across film consolidation and pore emptying in electrode drying: a continuous model validated against drying-rate, thickness, and schedule experiments

cs.CE cond-mat.mtrl-sciphysics.app-ph ·2026-10-21 ·Younghwan Joo, Sanghyun Oh, Sung-il Kim
unusual similarity 0.36
Abstract · 48 pages, 10 figures, 4 tables. Submitted to Applied Thermal Engineering. Data: https://doi.org/10.6084/m9.figshare.34704411

Drying battery electrodes faster saves energy but drives dissolved binder toward the film surface, depleting the current-collector interface and weakening adhesion. Models of this migration stop convecting the binder when film consolidation ends, and models of the subsequent pore emptying omit the binder or start from an assumed binder field, so no simulation has followed binder convection through both stages that a drying schedule acts on. This study presents a continuous simulation of the dissolved binder field across both stages, driven by the published drying rates and completed by effective descriptions of the two questions the base transport physics leaves open: where the liquid of the consolidating film carries the binder, and when the binder stops moving as the pores empty. With a single parameter set, the simulation reproduces three types of published measurements: the change of the surface-to-interface binder ratio with drying rate over a factor of 5.6 and the surface and interface binder levels of films six times thicker; concentration profiles through the film interior; and the response of the interface binder to the time at which the drying rate is switched mid-process. Applied without further adjustment to a published three-stage schedule, the model reproduces the shortened drying and the full interface recovery when the rate is lowered early, and shows that its final high-rate stage begins after the binder has stopped. Combined with a coater-scale process model, the model can be used to identify operating points for electrode production that improve energy efficiency and product quality together.

0.39

Generative Design of Liquid-Cooling Channels for Thermal Management of 2.5D and 3D Integrated Advanced Packaging

eess.SY ·2026-08-24 ·Michael Acquah, Zheng Liu
similarity 0.35
Abstract · 29 pages, 5 figures

High-power multi-chip packages require increasingly effective cooling as intensive heat is generated within a limited package area. This work presents a physics-guided generative design framework for liquid-cooling channel topology optimization in a 2.7 kW multi-chip package containing two high-power graphics processing units (GPUs) and one central processing unit (CPU). A conditional diffusion model generates symmetric channel layouts using maximum GPU temperature, GPU temperature spread, and pressure drop as performance targets. Generated designs undergo connectivity and dead-end-branch screening and are evaluated using a calibrated reduced-order thermal-fluids model. Based on 5,000 generated layouts, the multi-objective analysis identified the optimal design for thermal properties, with estimated maximum GPU temperature of 70.30 degree Celsius, GPU temperature spread of 24.90 degree Celsius, and pressure drop of 89.72 kPa. Compared to a conventional reference topology, the optimal design reduced the maximum GPU temperature, temperature spread, and pressure drop by 33.6%, 52.5%, and 72.8%, respectively. High-fidelity three-dimensional conjugate heat-transfer simulation in OpenFOAM estimated a maximum GPU temperature of 66.70 degree Celsius and a pressure drop of 92.1 kPa, showing only differences of 8.6% in temperature rise and 2.6% in pressure drop. The results demonstrate that physics-guided generative design based on the reduced-order model can efficiently discover unconventional cooling channel architectures while reducing reliance on repeating computationally expensive simulation.

0.46