CS Paper Radar

RadarML: A Multi-Channel Over-the-Air Dataset of Common Radar Waveforms for ES Evaluation

Ryan White, Adam Hosford, Matthew A. Ritchie

eess.SP ·submitted 2026-11-12 13:33 UTC · v1

Abstract

This paper introduces "RadarML", a publicly available dataset of modulated radar pulses recorded over-the-air across multiple semi-independent receiver channels. The dataset was generated using the UCL ARESTOR platform which is a Radio Frequency System on a Chip (RFSoC) based Software Defined Radio (SDR). The dataset contains a library of around two million waveforms with varying centre frequencies, bandwidths, pulse widths and modulations, with 1,000 examples of each signal variation per receiver channel. The goal of this dataset is to enable comparative analysis of radar modulation classification techniques on real data and stimulate research into multi-channel signal detection and modulation classification methods.

Comment
4 pages, 5 figures

Closest papers

Nearest neighbours by meaning across the whole index.

BladeSEI: A Multi-Channel and Multi-Day Dataset for Robust Specific Emitter Identification of Radars

eess.SP ·2026-11-13 ·Ryan White, Robert Jones, Hassan Habib, Matthew A. Ritchie, Victoria Nockles +1 more
similarity 0.70
Abstract · 7 pages, 8 figures

This paper introduces "BladeSEI", a multi-channel receiver, multi-day dataset of radar pulses recorded over-the-air from 12 Software Defined Radios (SDRs) for the purpose of Specific Emitter Identification (SEI). The aim of this dataset is to enable investigation into robust SEI techniques that are able to generalise across different receiver channels and recording sessions. The dataset consists of two waveform types per emitter, a 50 microsecond chirped pulse of 40 MHz bandwidth and a 10 microsecond unmodulated pulse. Pulses are captured simultaneously on four synchronised analogue-to-digital converter (ADC) channels of a multi-channel receiver over three recording sessions on two days: a baseline session, an identical repeat on the following day, and a session in which the emitters were thermally conditioned to alter their operating temperature. Initial results using Principal Component Analysis (PCA), Inception and ResNet based classifiers, trained and tested on a single ADC channel and recording session, show that the BladeRF emitters can be discriminated at high signal-to-noise ratio (SNR), with ResNet achieving a macro-F1 above 0.98 at 25 dB for both waveforms, and performance degrading towards random guessing at 0 dB.

0.24

Learning to Assess Heartbeat Observability for mmWave Heart-Rate Sensing

cs.AI ·2026-10-02 ·Yuxuan Hu, Shilin Shan, Jianfei Yang, Feng Xu
code/data similarity 0.56
Abstract · 19 pages, 11 figures. Project page: https://yuxuanhu9.github.io/HEAR/

Contactless heart-rate sensing with millimeter-wave (mmWave) radar requires assessing whether individual measurements support reliable estimation. We study learning to assess heartbeat observability, defined as the readability of the heartbeat component in an acquired phase spectrum, for selective heart-rate estimation. Coherent superposition of scatterer returns can suppress this component even under similar macroscopic observation geometry, motivating assessment directly from acquired measurements. To obtain training supervision across different observability conditions, we develop a controllable multi-scatterer frequency-modulated continuous-wave (FMCW) simulator. Agreement between the dominant heartbeat-band peak and the known heart rate provides an automatic observability label for each simulated measurement. We propose HEAR (Heartbeat Estimation with Assessed Reliability), a compact dual-task Transformer that jointly predicts an observability score and heart rate. Its input combines spectral magnitudes with frequencies relative to the respiration fundamental, providing context for respiratory harmonics. Trained solely on simulated observations, HEAR transfers zero-shot to two public real-world datasets collected at 60 and 120 GHz from 134 subjects. The same learned score supports selective prediction with both HEAR's own heart-rate head and multiple existing estimators. On the 120 GHz dataset, score-based selection reduces the HR head's mean absolute error from 17.9 BPM at full coverage to 1.6 BPM at 50% coverage. The complete pipeline achieves an end-to-end processing latency of 50.8 ms on an edge device. Project page: https://yuxuanhu9.github.io/HEAR/.

0.38

RadarCom: Unlocking Simultaneous Communication and Sensing on Commodity Automotive mmWave Radars

cs.NI ·2026-10-27 ·Yi Wei, Yue Zhang, Peijun Hou, Qiuyu Liao, Nan Cen
published similarity 0.55
Abstract · Accepted to ACM SenSys 2027. 14 pages

Vehicle-to-vehicle (V2V) communication can improve road safety and traffic efficiency, yet its deployment remains limited by the need for dedicated communication hardware and supporting infrastructure. Meanwhile, production vehicles are already widely equipped with millimeter-wave radars for sensing. To unlock their communication potential, this paper presents RadarCom, a software-defined system that enables direct radar-to-radar communication on unmodified commercial off-the-shelf (COTS) automotive mmWave radars while preserving their native sensing functionality. The key insight is that mutual inter-radar interference, traditionally viewed as harmful, can be repurposed as a communication carrier. Based on this insight, RadarCom introduces slope-mismatch-based discovery, adaptive chirp synchronization, differential coding on range-FFT, and sensing-aware interference suppression to enable simultaneous communication and sensing without hardware modification, waveform redesign, or infrastructure support. We implement RadarCom on TI AWR2243 automotive radars and evaluate it under static, dynamic, and challenging real-world conditions. Results show an average effective data rate of 5.55 kbps with symbol error rates below 1.5%, while maintaining sensing F1 scores of up to 80.5% during concurrent communication. These results demonstrate the feasibility of transforming commodity automotive radars into dual-purpose communication and sensing devices.

0.41

Rad-R: A Raw-ADC Radar Dataset and Capture-Invariant SSM for Hardware-Fault Diagnosis

cs.CV ·2026-08-31 ·Mainak Mallick, Junghwan Yim, Alankrit Gupta, Seung-Kyum Choi
benchmarkdatasetunusual similarity 0.53
Abstract · v2: author list updated

Automotive mmWave radar can develop vibration, antenna misalignment, radome blockage, and receive-channel degradation that corrupt the signal before perception begins. Data for these faults are scarce because each condition must be induced and measured on physical hardware. We introduce Rad-R, a raw-ADC dataset captured with a 4-chip 77GHz TI MMWCAS-RF-EVM cascade (192 virtual channels). Unlike existing raw-radar datasets, Rad-R pairs each recording with a controlled hardware fault at a calibrated severity, an independent physical severity measurement, and frame-synchronised IMU, temperature, GPS, and camera streams. Rad-R is a single-session dataset, so our generalisation claims are confined to a controlled cross-severity protocol in which train and test use physically distinct captures. A reproducible benchmark evaluates seven representative vision backbones and the proposed raw-IQ Mamba SSM (RadrNet) under within-clip, chirp-wise anytime, few-shot cross-capture, and controlled cross-severity protocols. Within-clip performance is near-saturated ($>0.98$ macro-F1), whereas cross-severity generalisation remains difficult: the absolute-phase RadrNet-DS falls to $0.49$ macro-F1. RadrNet-DS-CI replaces absolute phase with per-frame-standardised magnitude and relative chirp-to-chirp phase and ranks first on the controlled benchmark ($0.663$ vs. $0.628$ for the strongest RD-CNN; three seeds); the RadrNet family also leads on the anytime and few-shot budgets. A descriptive cross-modal analysis further finds that radar micro-Doppler covaries with independently measured IMU vibration energy (pooled Spearman $ρ=0.41$ across conditions). The complete dataset and code will be released publicly under permissive licences.

0.51

AFDM-ISAC Design Amalgamating FMCW Radar and Carrier Aggregation

eess.SP ·2026-10-29 ·Qu Luo, Qihao Peng, Zihuai Lin, Maged Elkashlan, Pei Xiao +2 more
publishedhot direction similarity 0.52
Abstract

Carrier-aggregation (CA)-assisted affine frequency division multiplexing (AFDM) is conceived for integrated sensing and communication (ISAC) systems. A frequency-modulated continuous-wave (FMCW)-inspired dechirping receiver is developed to exploit the inherent pulse-compression property of AFDM chirp subcarriers for accurate delay-Doppler estimation. To further enhance sensing performance, a pair of CA schemes is proposed. The Type-I CA scheme improves sensing accuracy by aggregating echo signals across multiple CA bands prior to radar processing, thereby reducing estimation error with low hardware overhead. The Type-II CA scheme enhances range resolution by effectively enlarging the sensing bandwidth, where chirps from different CA bands are designed to form a continuous set of chirp signals. Based on this principle, variable subcarrier sensing and asynchronous sensing schemes are developed. For the communication receiver, the generalized input-output relationship of AFDM is derived under both fractional delay and fractional Doppler (FDFD) channels. To address the challenge of FDFD estimation, a cross-domain sensing-assisted channel estimation (CDS-CE) scheme is proposed to facilitate time-domain delay-Doppler parameter estimation and affine-domain channel coefficient recovery. Simulation results demonstrate that the proposed framework achieves significant improvements in sensing accuracy and resolution, as well as in channel estimation performance compared with state-of-the-art methods.

0.35

Subspace-based Second-Order Detection Architectures for Radar Signals in the Presence of Unstructured Interference

eess.SP ·2026-10-05 ·Nicola Acito, Danilo Orlando, Giuseppe Ricci
similarity 0.52
Abstract

This paper proposes a subspace-based decision scheme to detect range-spread targets in presence of thermal noise, clutter, and intentional interference. The target and intentional interference (i.e., noise-like jammer) effects are confined to the covariance matrix of the received primary data vectors. The jammer is also present in the secondary data vectors necessary to estimate the clutter covariance matrix. Finally, an additional set of training data, acquired by the system in passive mode and, hence, not contaminated by target and clutter echoes, is used to avoid the jammer parameters are unidentifiable. The detection problem is addressed by deriving an architecture based upon the likelihood ratio test where the unknown second-order parameters are suitably estimated. To this end, a unified theoretical framework is defined also providing a geometrical interpretation of the estimation procedures. The performance assessment, conducted also in comparison to a natural competitor, highlights the effectiveness of the proposed solution.

0.27

Task-Based Evaluation of Raw Radar Data Compression: A Pre-Registered Study of Where Classical Codecs Fail to Preserve Target Detection, and Why

eess.SP ·2026-08-18 ·Eric Michael Chrabot
code/data similarity 0.50
Abstract · 16 pages, 9 figures, 5 tables. v2: corrects the retention-only counterfactual (Secs. I, III-A, V-C); states the criterion's commit chronolog…

Synthetic aperture radar (SAR) systems collect raw I/Q echo data at rates that exceed downlink capacity; fielded systems compress onboard with block-adaptive quantization (BAQ/FDBAQ). Proposed replacements, including learned compression, are evaluated with image-quality metrics (PSNR, SSIM, SQNR); none measures whether the data still supports its operational use. We introduce a task-based evaluation methodology for raw radar compression, with a published pre-registration trail: codecs are scored after SAR focusing against a two-sided criterion -- a CFAR detection-retention floor and a spurious-detection budget at matched threshold -- using frozen task models trained once on uncompressed data. On Sentinel-1 stripmap Level-0 data the evaluation brackets the fielded FDBAQ operating point at the resolution of the BAQ grid (3-bit BAQ sustains utility at 6.12 bits per complex sample; 2-bit does not), with a reported lattice artifact found to change retention by at most 0.004. Under the final plane-mapping rule no classical configuration sustains utility below 4.86 bits per complex sample on this scene. Energy concentration after focusing delivers the predicted retention gain (0.888 vs 0.691 at 2 bits) but converts it into target-adjacent false alarms for wavelet and block-transform codecs alike: a retention-only rule certifies focused-domain JPEG2000 at 4 bits while it produces 2.5 times the tolerable spurious count. On AFRL Gotcha GMTI data (airborne, never compressed onboard) the frontier is bracketed at 7.4-8.0 bits per complex sample and the same trade reappears; on an Umbra spotlight image JPEG2000 passes the retention floor at 2, 1, and 0.5 bits while producing 10-14 times the spurious budget. We report the full pre-registration trail, including the chronology of the criterion's two clauses, one retracted overclaim, and a bounded negative result for a small learned codec.

0.28

Clinical radar heart sounds with echocardiographic phenotypes of ventricular dysfunction and valvular disease

cs.CV ·2026-10-21 ·Jinye Li, Qingchao Chen
unusual similarity 0.50
Abstract

Radar heart sounds capture cardiac mechanical activity without contact, while echocardiography characterizes ventricular and valvular function. Paired measurements connect these signals to structural heart disease, yet such data remain sparsely represented in public resources. Here we present 537 radar heart-sound recordings paired with one echocardiographic report for each of 162 patients. The cohort covers three overlapping phenotypes: left ventricular ejection fraction (LVEF) below 50%, regional wall-motion abnormality and at least moderate valvular regurgitation, present in 38, 43 and 39 patients, respectively. Original complex signals, processed radar heart sounds and temporal quality segmentation support signal-to-phenotype analysis. Technical validation retains 95.93% of signal duration and confirms reproducible waveform reconstruction. Patient-level five-fold evaluation achieves a mean outer-test AUROC of $0.770\pm0.138$ for reduced LVEF, identifying mechanical information associated with ventricular systolic dysfunction. This resource supports research linking non-contact cardiac mechanical signals to echocardiographic structural and functional phenotypes.

0.23