CS Paper Radar

Constrained Optimization-Based Yaw-Rate Reference Map Generation for Active Rear Steering Control of Four-Wheel Steering Vehicles

Myeongseok Ryu, Donghyun Hwang, Youngsik Yoon, Kyunghwan Choi

eess.SY ·submitted 2026-09-19 07:01 UTC · v1
published

Abstract

The effectiveness of active rear steering (ARS) control for four-wheel steering (4WS) vehicles is widely recognized in the automotive industry. At low speeds, ARS control can enhance maneuverability by steering the rear wheels in the opposite direction to the front wheels, reducing the turning radius. In contrast, at high speeds, ARS control can improve stability by steering the rear wheels in the same direction as the front wheels, preventing oversteer behavior. However, the performance of ARS control is often limited by the reference model used to generate the desired yaw rate, which is typically derived from a steady state of front-wheel steering (FWS) vehicle model. In this paper, we conduct a numerical analysis to construct an optimal yaw rate reference map for ARS control by formulating a constrained optimization problem. In the optimization problem, constraints are imposed to ensure that the vehicle operates within safe limits at steady state. Numerical simulations demonstrate the effectiveness of the proposed method in providing an optimal yaw rate reference map for ARS control.

Comment
This work has been submitted and accepted to International Conference on Control, Automation and Systems (ICCAS) 2026

Closest papers

Nearest neighbours by meaning across the whole index.

SCET-CBF: Speed-Calibrated Soft Guidance for One-Step Dynamic Navigation

cs.RO ·2026-10-24 ·Xiaoyu Han, Dongkun Han
similarity 0.56
Abstract · 9 pages, 6 figures

Control barrier functions (CBFs) support collision avoidance, yet dense dynamic encounters can leave a vehicle with no feasible command. Geometric refinements and soft constraints help preserve motion choices. Using these choices also requires accounting for the vehicle's changing turning response. For a steering-limited bicycle, braking can lower closing speed while slowing the lateral motion needed before an obstacle arrives. We propose SCET-CBF, a speed-calibrated soft guidance law for one-step dynamic navigation. A short lateral escape maneuver gives an allowable approach speed. Its speed derivative allows a quadratic program to weigh both effects of braking when choosing acceleration and steering. Soft penalties accommodate competing obstacle preferences within the input set permitted by segment and braking constraints. We derive the guidance and establish protection over each accepted motion segment, together with conditional braking invariance for a single obstacle. On 2500 paired tasks with a 60 s deadline, SCET achieves 72.8% completion, compared with 49.8% for CBF/velocity-obstacle control and 69.8% for an enhanced 1 s CBF-MPC. At 100 obstacles, SCET and the enhanced MPC complete 52.4% and 33.6% of tasks. Paired studies identify the contributions of speed feedback and early activation. Further evaluations examine the operating range under lateral acceleration limits and bounded motion and execution errors.

0.13

Observability Analysis and Online Calibration of Visual-Inertial-Wheel Odometry for 4WIS4WID Mobile Robots

cs.RO ·2026-09-29 ·Branimir Ćaran, Vladimir Milić, Bojan Šekoranja, Bojan Jerbić
similarity 0.56
Abstract · This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may…

In this paper, we present a visual-inertial-wheel odometry (VIWO) framework with online calibration for four-wheel independently steered and driven (4WIS4WID) mobile robots. We derive a 2D odometry model directly from the four driving velocities and steering angles, using both the longitudinal rolling constraints and the lateral no-slip constraints of all wheels. A preintegration model and analytical Jacobians are developed for efficient filtering and calibration. An observability analysis of the linearized VIWO system shows that a drive-only model makes all steering offsets unobservable, whereas the proposed redundant model restores their observability. The analysis also identifies four standard VINS unobservable directions and three additional directions associated with the arbitrary placement of the odometry reference frame. Furthermore, we characterize several degenerate motions, including zero yaw rate, constant steering, and a non-rolling wheel, and derive the corresponding excitation conditions for the thirteen wheel intrinsics that remain after fixing the odometry frame reference. The performance of the proposed system has been demonstrated in both simulation and real-world experiments on a 4WIS4WID mobile robot.

0.21

Physics-Informed Direct Data-Driven Gain-Scheduled Control for Improving the Extrapolation Performance of Vehicle Lateral Control

eess.SY ·2026-11-16 ·Shuichi Yahagi, Aoi Koyanagi, Ansei Yonezawa, Heisei Yonezawa, Hiroki Seto +2 more
similarity 0.54
Abstract

This paper proposes a physics-informed direct data-driven control (PI-D3C) framework for designing a gain-scheduled proportional-integral controller for vehicle yaw-rate tracking. Vehicle lateral dynamics vary depending on vehicle velocity, making it difficult for controllers designed using data collected over a limited operating range to maintain satisfactory control performance outside that range. We introduce a novel PI-D3C framework that integrates pure data-driven virtual reference feedback tuning (VRFT) with prior physical knowledge, thereby significantly improving extrapolation performance beyond the operating range covered by the collected data. In the proposed approach, the gain-scheduled controller parameters are designed based on both training data and the yaw-rate response predicted by the physics-based model. To evaluate the effectiveness of the proposed method, numerical simulations are conducted using co-simulation between MATLAB/Simulink and CarSim. The results demonstrate that the controller designed by pure VRFT achieves satisfactory tracking performance within the training velocity region but exhibits significant deterioration in tracking performance outside the training region. In contrast, the proposed controller maintains good yaw-rate tracking performance over a wider velocity range while suppressing excessive variations in the scheduled gains and steering input. These results indicate that incorporating prior physical knowledge into pure data-driven VRFT improves the extrapolation performance of gain-scheduled controllers designed using limited training data.

0.39

Identification of the Steering and Speed Systems of a Four-Wheel-Steering Tractor for Optimal Control

eess.SY ·2026-09-04 ·Riikka Soitinaho, Timo Oksanen
similarity 0.54
Abstract

Model-based control design requires sufficiently accurate model of the system-to-be-controlled. This paper addresses the system identification of steering and speed control of a four-wheel-steering agricultural tractor for the purpose of developing path tracking control. To this end, we investigate the steering and speed control systems of the tractor. These are complex systems with digital, mechatronic, and hydraulic components challenging to model based on first principles. We take a data-driven approach to estimating the system models. The resulting model combines the kinematic model of the vehicle, actuators modelled as first-order systems, and estimated values for time constants and transport delays.

0.51

Inverse Optimal Feedback Stabilization of 3D Nonholonomic Vehicles in Spherical Coordinates

eess.SY math.OC ·2026-09-28 ·Kwang Hak Kim, Mamadou Diagne, Miroslav Krstic
similarity 0.54
Abstract · Submitted to the 2027 American Control Conference (ACC)

Inverse optimal control provides optimality and robustness guarantees without solving the Hamilton--Jacobi--Bellman (HJB) equation, but its application to 3D nonholonomic vehicles has been precluded by the absence of strict control Lyapunov functions (CLFs). Recently, such strict CLFs were constructed for the 3D nonholonomic vehicle in spherical coordinates, which circumvent Brockett's obstruction, on the largest possible domain. Building on this construction, this paper develops a general inverse optimal stabilizing controller for the 3D nonholonomic vehicle actuated by surge velocity, pitch rate, and yaw rate. The design is a damping $L_gV$ feedback that minimizes a meaningful cost and inherits stability margins. Its flexibility is demonstrated through two choices of penalty function: a quadratic running cost on the state, recovering a near-classical optimal control formulation, and stabilization under user-defined input constraints. Numerical simulations illustrate stabilization performance, control-effort tradeoffs, and the effect of input constraints.

0.16

A Novel Path-Tracking Algorithm for Automated Tractor-Trailer Forward and Backward Maneuvers

cs.RO eess.SY ·2026-09-18 ·Alexandre Lombard, Florent Perronnet, Théo Rigal, Nicolas Gaud, Abdeljalil Abbas-Turki
similarity 0.53
Abstract

Fully autonomous tractor-trailer systems are increasingly deployed in logistics, agriculture, and industrial environments, where precise and robust path-tracking capabilities are essential. However, the articulation between the tractor and the trailer introduces additional nonlinearities and significantly complicates lateral and longitudinal control, particularly during reversing maneuvers. This paper introduces a novel path-tracking algorithm specifically designed for articulated vehicles with a single trailer. The proposed method combines a lateral control law applied at the trailer level with a short-horizon predictive adjustment of the tractor steering angle, ensuring stable convergence toward the desired path in both forward and backward motion. The approach is geometry-based and requires no per-vehicle calibration or training. Simulation studies in a high-fidelity physics simulator show steady-state or final lateral errors of $0.02$--$0.05$~m on straight-line, circular, and reverse docking trajectories, which is of the same order of magnitude as, or lower than, the errors reported in the literature. Real-world experiments on a small-scale tractor--trailer robot, with the whole controller running on a low-cost microcontroller, further confirm the feasibility of the approach, with lateral errors below 13~mm during repeated reverse docking maneuvers despite a pose detection latency of about 200~ms.

0.10

Model predictive traction control system based on the Koopman operator

eess.SY ·2026-08-26 ·Josip Kir Hromatko, Šandor Ileš
publishedcode/data similarity 0.53
Abstract · 6 pages, 4 figures; associated code available at https://github.com/PVDC-project/pvdc-kmpc-traction-control

Due to their importance, traction control and anti-lock braking systems have become standard equipment in modern vehicles. However, accurate models of tire dynamics are often difficult to obtain and usually include nonlinearities, making their use in control systems challenging. This paper describes a traction control system based on model predictive control and Koopman operator theory, which aims to approximate nonlinear systems with linear ones through a state space transformation. A linear model predictive controller based on the Koopman predictor is compared to a standard nonlinear model predictive controller. Experiments in a high-fidelity vehicle dynamics simulation environment show a comparable reference tracking performance of the two controllers, with a reduced execution time for the proposed Koopman operator-based algorithm, both on a standard PC and embedded hardware.

0.78

Combining Evasive and Braking Reactions for Safety Reference Models in Automated Vehicles

cs.RO ·2026-09-24 ·Riccardo Donà, Konstantinos Mattas, Biagio Ciuffo
published similarity 0.53
Abstract · 6 pages, 7 figures, Accepted for publication at the IEEE International Conference on Intelligent Transportation Systems (ITSC), 2026

Computational models of careful and competent human drivers are essential for scenario-based evaluation of automated driving systems (ADS). However, most existing safety reference models primarily focus on longitudinal braking, neglecting the role of evasive steering in human collision avoidance. This paper proposes a hybrid Fuzzy-Safety Model (FSM-H) that integrates longitudinal mitigation and lateral avoidance within a unified behavioral framework. The braking component is governed by Proactive Fuzzy Safety (PFS) metrics, representing the erosion of longitudinal safety margins, while the steering component is driven by Criticality Fuzzy Safety for lane-change (CFS-LC), capturing lateral conflict severity and maneuver feasibility. A finite-state architecture models the sequential escalation from nominal driving to braking and, when necessary, to evasive steering, incorporating perception-reaction time and lane-check delays to reflect human decision processes. The model is evaluated in reconstructed high-criticality cut-in scenarios and compared with braking-only and steering-only reference strategies. Results show that the hybrid approach expands the preventability envelope while maintaining behavioral plausibility and computational tractability. The proposed framework provides a transparent and explainable human reference model suitable for simulation-based ADS safety benchmarking and regulatory assessment.

0.32