CS Paper Radar

Bi-manual Stabilization of the Cervical Spine for Safe Physical Human-Robot Interaction in Rolling Maneuvers

Elizabeth Peiros, Moira Bohley, Lucas Yager, Derek Chen, Rebecca Fellbaum, Chris D'Ambrosia, Ananya Rao, Xiao Liang, Michael C. Yip

cs.RO ·submitted 2026-10-03 02:19 UTC · v1

Abstract

The neck, specifically the cervical spine, is a highly fragile and mobile part of the body with a high risk of catastrophic injury. Whether someone is injured on a battlefield, in a natural disaster, or in an athletic event, great care is always taken with the cervical spine when transporting, rolling, or moving the patient. In this work, we present an algorithm and adaptations for bi-manual robots to stabilize the cervical spine during rolling maneuvers. We investigate techniques to maximize grip strength within safety bounds and present a control approach for proper neck rotation. We found that with our approach, a bi-manual robot is capable of achieving human-level performance in maintaining target rotational alignments. The axial alignment for the robot with prediction was within .21 degrees of human novices.

Comment
8 pages, 8 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Determination of the Human-Robot Interaction Workspace for Robot Assisted Head Stabilization Control

cs.RO physics.bio-phphysics.med-ph ·2026-10-19 ·Xinmin Liu, Alexander L. Van Slyke, Destinee Holloman, Ahmad Sakaamini, Rodney D. Wiersma
similarity 0.57
Abstract

Accurate head immobilization is critical for medical procedures such as neuroimaging and intracranial radiation therapy, where even minor motion can compromise precision. Traditional methods, such as rigid stereotactic frames and thermoplastic face masks, are invasive, uncomfortable for patients, and require a time-consuming setup. To overcome these limitations, a novel approach employs a 6-degree-of-freedom (6DoF) robotic head holder that is integrated with real-time optical motion tracking, enabling dynamic compensation for head movements without physical restraint. However, implementing this system requires a detailed biomechanical understanding of skull-cervical spine interactions to define safe and effective motion limits. In this study, we conduct a human volunteer investigation using a 6DoF Stewart platform robot to characterize biokinematic workspace of the head-neck system and establish foundational data for human-robot interaction in precision head stabilization.

0.21

Throwing a Tight Spiral American Football by a Humanoid Robot

cs.RO ·2026-08-17 ·Zaid Mahboob, Bowen Weng
similarity 0.54
Abstract

Accurate throwing of the American football requires precise regulation of release conditions, where coupled linear and angular momentum determine flight stability and targeting accuracy. While prior work on robotic object throwing has largely focused on generating dynamically feasible release velocities using open-gripper paradigms, explicit control of spin injection at detachment remains underexplored, particularly for aerodynamically anisotropic objects like the American football. In this paper, we present the spin-stabilized controlled tight spiral throw of an American football by a humanoid robot. Achieving this requires (i) accurately reaching the desired coupled momentum, which often involves high degrees-of-freedom (DoF) movements completed within approximately half a second, and (ii) managing the complex transient contact dynamics that arise during the sub-100-millisecond release phase, when the football is effectively underactuated as it moves partially across the fingers. To this end, we develop a coupled whole-body control strategy where the lower body is performing informed stabilization while the upper body is further divided into two phases with (i) a throw phase accelerating the football to a target state through trajectory optimization and tracking, and (ii) a follow-through phase utilizing model predictive control to actively control the wrist and remaining in-contact fingers. The proposed framework is empirically validated on a 29-DoF Unitree G1 humanoid equipped with a 7-DoF Dex3-1 three-fingered gripper. The thrown American football reaches up to 93.6% spin efficiency and a 0.286 radians linear-velocity-to-nose-alignment (nose-angle) error (where an "ideal" tight spiral corresponds to 100 % spin efficiency and 0 radians nose-angle error) at up to a 5.35 m/s linear velocity and an angular velocity of 14.5 rad/s.

0.24

Hardware-as-Regularization: Enhancing Data Consistency in Imitation Learning via an Adjustable Passive Compliant Leader Arm

cs.RO ·2026-10-16 ·Hideyuki Ichiwara, Yushi Kaida, Hirokazu Ishida
similarity 0.54
Abstract

Low-cost passive leader arms enable scalable data collection for imitation learning, but their lack of restoring forces leaves redundant joints unconstrained, yielding highly inconsistent joint-space trajectories. We address this with a low-cost passive joint module (an adjustable mechanical clutch and a 3D-printed spiral spring) that pulls each joint toward a user-defined neutral posture. This passive restoring force acts as a physical prior equivalent to joint-space $L_2$ regularization (``Hardware-as-Regularization''), improving kinematic consistency with shorter completion time than an unregularized arm and preserved movement smoothness. Experiments show substantial variance reduction over a naive passive arm, trajectory consistency on par with an active virtual spring of the same actuator class, and substantially higher downstream success rates (e.g., 73.3% vs. 36.7% on Block Stacking); a stiffness sweep shows consistency degrading monotonically as stiffness decreases, confirming that mechanical stiffness behaves like a regularization weight.

0.16

Anchor 1: Precise and Stable Humanoid Control for Whole-Body Manipulation

cs.RO ·2026-10-30 ·Archon Robotics, :, Caojun Wang, Checheng Yu, Gangcheng Jiang +22 more
benchmark similarity 0.54
Abstract

Humanoid controllers have acquired increasingly diverse motor skills, yet translating these capabilities into precise and stable whole-body manipulation remains challenging. Manipulation tasks are sensitive to execution deviations -- even small errors or unintended steps can cause failure. Introducing Anchor 1, a whole-body controller for precise and stable whole-body manipulation, together with a benchmark spanning diverse coordination demands. Anchor 1 adopts calibrated sparse motion references to preserve task-relevant human motion structure without online joint-space retargeting, leaving kinematic freedom for precise control. To guide this freedom towards stable, physically plausible whole-body coordination, we shape the training distribution through offline curation of robot motions paired with these calibrated sparse references. We further introduce explicit error feedback decoupled from motion encoding, improving control precision while supporting flexible command interfaces. To achieve a systematic evaluation of these capabilities, a benchmark is proposed to assess precision, sustained execution stability, and reachability across diverse whole-body coordination demands. Evaluations in simulation and on hardware show stronger precision and stability across all evaluation tracks. Under the most strict real-world global scoring setting, Anchor 1 achieves a 30\% to 80\% decrease in tracking error with fewer look-ahead inputs, and without retargeting compared to all existing controllers. Downstream experiments demonstrate more efficient teleoperated data collection and higher task success using the same deployment pipeline as well. We believe Anchor 1 supports precise and stable whole-body control as a practical basis for humanoid task execution.

0.18

Shared-Control Teleoperation of Omnidirectional Aerial Robots for Continuous Valve Rotation

cs.RO ·2026-10-10 ·Jinjie Li, Yicheng Chen, Haokun Liu, Moju Zhao
published similarity 0.53
Abstract · 3 pages, 2 figures. Accepted to IROS 2025 Workshop on Advancements in Aerial Physical Interaction. Best Paper Award Candidate

Omnidirectional aerial robots offer full 6-DoF independent control over position and orientation, making them popular for aerial manipulation. Although there have been advancements in robotic autonomy, human operation remains essential in complex aerial environments. Previously, we proposed an aerial teleoperation system that brings the rotational flexibility of human hands into the unbounded aerial workspace, which was evaluated through a vertically mounted valve-turning task. However, due to the limited range of human forearm's motion, the robot could not continuously rotate the valve, hindering its application in industry. In this work, we propose an approach to initiate continuous rotation when the forearm angle exceeds a threshold. This switch of control authority exemplifies the concept shared control from human-robot interaction, marking a further step in aerial teleoperation.

0.25

Optimized Wrench Polytope Analysis for Real-Time Stability Control of Legged Robots in Complex Multi-Contact Configurations

cs.RO ·2026-09-15 ·Friedrich Graaf, Elias Birkefeld, Christian Eichmann, Elias Hofele, Tristan Schnell +3 more
similarity 0.53
Abstract · 8 pages, 8 figures, submitted to the IEEE ROBIO 2026 Conference

Legged robots offer a variety of automation applications in real-world scenarios. But areas that are difficult to traverse, like slopes, caves, or scaffolding, still pose a great challenge for traversal. To tackle this problem, we propose an optimized algorithm for evaluating the full actuatable wrench polytope for arbitrary contact scenarios. With our improved analysis algorithm, the torques for each joint of the robot can be calculated within a control frequency of 49 Hz. The achieved speedup allows for deployment within a regular control loop for actuating robot poses for different contact scenarios. We evaluated our stability controller extensively in simulation scenarios and validated its applicability by deploying it on actual walking robot hardware. The proposed controller achieved stability in very complex scenarios that are currently not achievable by any other controller.

0.29

A Two-Wheeled Quadrotor with All-Clockwise Tilted Rotors for Level-Attitude Surface Locomotnion

cs.RO eess.SY ·2026-10-29 ·Takumi Ito, Satoshi Nakano
similarity 0.53
Abstract

Conventional wheel-equipped quadrotor UAVs must tilt their bodies to generate lateral forces, limiting their ability to maintain a desired attitude during lateral motion. This paper proposes a wheeled quadrotor with all-clockwise tilted rotors that uses surface contact as a constraint to generate propulsion along the contact surface without tilting the vehicle. We analyze feasible forces and system controllability under surface contact and optimize the vehicle design considering different rotor-spin configurations. The optimization results show that a configuration in which all four rotors spin clockwise can generate a larger tangential force than the conventional alternating-spin configuration. This approach enables both aerial and contact-based locomotion without additional rotor-tilting actuators or mechanisms. Simulation results demonstrate both hovering in free space and horizontal locomotion on a floor while maintaining a level attitude.

0.21

Grasping and Stabilizing Tumbling Objects with Rotating-Base Multi-Arm Space Manipulators

cs.RO eess.SY ·2026-11-03 ·Farhad Aghili
top venue similarity 0.53
Abstract

This paper presents an innovative guidance and control method for a space manipulator that actively maneuvers its base to hold a tumbling object stationary relative to the base during proximity operations. This simplifies motion planning, reduces collision risk, and enables impact-free capture using single- or multi-arm configurations, with or without predefined grasping interfaces. The proposed approach involves two phases. In the pre-grasping phase, a synchronization control aligns the target's center of mass (CoM) with the system's instantaneous center of rotation (ICR), virtually rigidizing the target-servicer system to keep the object stationary for reliable grasping. In the post grasping phase, a control strategy based on Hamiltonian dynamics and optimal control stabilizes the combined system by minimizing time, fuel, or energy, while respecting base torque limits and multiple grasping constraints. For structured targets, applied forces and torques stay within their bounds; for unstructured ones, friction constraints prevent slipping. A case study demonstrates the method's effectiveness in enabling both the subsequent grasping and detumbling phases.

0.36