CS Paper Radar

Enabling Tidying Tasks in Robotic Vacuum Cleaners via a Geometry-Induced Self-Locking Deployable Linkage

Eunseok Song, Jinwoong Kim, Sohee Lim, Taehyeong Kim, Yongkook Kim, Hyeontaek Lim, Hyungmin Son, Seungyong Hyung

cs.RO eess.SY ·submitted 2026-10-14 13:08 UTC · v2

Abstract

Robotic vacuum cleaners must extend their functionality within tight limits on size, cost, and durability. Deployable linkages with few actuators meet these limits, but their backdrivability makes it difficult to hold a load-bearing posture without continuous motor torque. We introduce a two-stage deployable linkage that locks through its own geometry. At full deployment, an internal three-link subchain approaches a collinear, near-singular configuration in which the input-output transmission ratio tends to zero; plate loads therefore leave only a small residual back-driving torque, which drive-train friction and a lightweight magnetic detent absorb. A single actuator performs deployment and locking, a passive chassis-mounted trigger releases the lock for retraction, and a second actuator adjusts only the deployment height. We integrate the mechanism into a commercial robotic vacuum cleaner and validate it through a 100-cycle repeatability test, a quasi-static load test in which the locked plate held 50 N with the motor de-energized, and 140 pushing-type tidying trials on seven household objects against a commercial arm-equipped vacuum robot. We derive the analytical holding condition and discuss its limits as an intermediate design point between passive compliance and articulated manipulation.

Comment
8 pages, 6 figures, 1 table. v2: corrected author name, added minor revisions

Closest papers

Nearest neighbours by meaning across the whole index.

Detachable Wire Drive : Reconfigurable Robot Architecture with Shared Actuators

cs.RO ·2026-08-16 ·Takahiro Hattori, Kento Kawaharazuka, Kei Okada
published similarity 0.61
Abstract · Accepted at IROS2026, website - https://hatofly.github.io/detachable-wire-drive/

Reconfigurable robots offer significant potential for adapting to diverse tasks; however, conventional centralized architectures often require dedicated actuators for each module, leading to substantial increases in overall system weight, volume, and cost. To address these challenges, this paper presents the "Detachable Wire Drive," a reconfigurable robotic system that enables the sharing of heavy and expensive actuators across various morphologies. The core of this system is the "Wire Detach Unit," a mechanism designed to physically split and reconnect wire drive paths, allowing motors to be consolidated into a common base unit. We demonstrate the versatility of this approach by developing a 2-DOF rigid arm, a continuum arm, and two distinct grippers, all of which are interchangeably attached to, and driven by, a single shared actuator set. Experimental results validate the mechanical reliability of the detachment process and the control framework's ability to seamlessly manage transitions between configurations, highlighting a path toward more efficient and multi-functional robotic systems.

0.39

A Conveyor Belt Mechanism for Repositionable Magnetic Coupling Between Continuum Robots

cs.RO ·2026-10-29 ·Ella Walsh, Eric Diller, Jessica Burgner-Kahrs
similarity 0.57
Abstract · 7 pages, 10 figures

This work proposes a novel conveyor belt mechanism enabling continuous, active repositioning of functional elements along the body of a tendon-driven continuum robot. Up to three conveyor belt mechanisms are integrated within a 9 mm diameter continuum robot. We demonstrate equivalent or reduced conveyor belt actuation forces compared to robot tendon actuation forces. As a case study, we mount permanent magnets along two conveyor belts, and demonstrate actively reconfigurable inter-robot coupling. Coupling point location and quantity can be adjusted during robot operation to actively tune the effective stiffness of the coupled multi-robot system. We show that effective stiffness follows a predictable inverse-cubic relationship with coupling location, and increases with the number of coupling points. These findings demonstrate that the conveyor belt mechanism enables active functional element repositioning for changing tasks requirements, with magnetic inter-robot coupling as one proof-of-concept.

0.28

RotateIt! Fast and Reliable Single-Arm Garment Unfolding via Online-Adaptive Dynamic Rotation

cs.RO ·2026-09-17 ·Zeqing Zhang, Zuokun Xie, Ao Fang, Bin Dai, Zhengjie Shu +2 more
similarity 0.57
Abstract

Robotic garment unfolding is essential for downstream tasks, yet quasi-static methods require repeated actions, while existing dynamic approaches predominantly rely on bimanual flinging. We present RotateIt!, a single-arm framework that uses adaptive axial rotation for dynamic garment unfolding. To the best of our knowledge, it is the first unfolding framework to employ dynamic axial rotation as its primary manipulation primitive. From a randomly initialized tabletop configuration, the robot selects a rotation-effective grasp and rotates the lifted garment about an approximately fixed anchor, generating inertial tension that separates overlapping layers within a compact workspace. A grasp ranker selects the anchor, while an online residual policy adapts the rotation extent and speed, thereby determining the release timing. Across seen and unseen simulated garments and eight unseen real garments, RotateIt! improves success within three attempts by 44.0-61.0 percentage points over quasi-static pick-and-place. The simulation-trained policies transfer zero-shot to the real world, achieving 75.6% success, 41% higher first-attempt coverage, and 26% higher final coverage. The resulting states further enable autonomous robotic folding without manual rearrangement.

0.25

Tilt as a Certified Resource: Preserving Motor Wrench-Rate Authority on Articulated Multirotors

cs.RO eess.SYmath.OC ·2026-09-18 ·Giuseppe Silano, Martin Saska
similarity 0.55
Abstract · This work has been submitted to the IEEE for possible publication

Fully-actuated multirotor aerial vehicles must not only track nominal wrenches but retain the "readiness" to modulate them rapidly under disturbances. Classical effort-minimizing allocators ignore this dynamic limit, whereas maximizing readiness leads to topologically disconnected optimal sheets demanding physically impossible actuator rates. Enforcing a readiness safety floor on fixed-geometry symmetric platforms further encounters a zero-sum degeneracy: motor-speed redistribution cannot improve authority without conceding wrench tracking. This paper uses active morphology to break the degeneracy, treating servo tilt as a geometric resource supplying authority-recovery directions unavailable to static rotors. We construct a configuration-dependent, motor-only readiness certificate - the log-volume of the reachable wrench-rate set - that explicitly excludes servo capacity, preventing a "ghost capacity fallacy" in which the certificate would falsely credit slow mechanical kinematic limits instead of collapsing accurately at motor saturation. The certificate is enforced as a Control Barrier Function (CBF) within a Unified Physical-Command Quadratic Program acting on motor torques and servo setpoints. Closed-loop simulations of an articulated octorotor under severe gust disturbances show classical allocators diverging and uncertified articulated allocators violating the safety floor, while the proposed CBF filter bounds the system state and preserves vehicle authority.

0.34

Tensegrity Continuum Robots Enable Task-Adaptive Morphologies for Cooperative Behaviors

cs.RO ·2026-08-27 ·Mahmud Hasan Saikot, Sydney Spiegel, Sudheera Akalanka Kariyawasam, Andrew Stefka, Josh Chrisler +1 more
top venue similarity 0.53
Abstract · 22 pages, 6 figures, Accepted to Nature Machine Intelligence

Robots that can change their morphologies and behaviors for different tasks and environments hold great promise for adaptable, multifunctional systems. Modular reconfigurable robots (MRRs) can achieve such functionalities by docking and rearranging individual units, but most rely on rigid modules that lack structural compliance, resulting in limited capabilities. Continuum robots offer compliance through flexible backbones, yet they cannot self-reconfigure into task-adaptive multi-robot configurations. Here, we introduce an MRR that unifies the advantages of both architectures by combining a tensegrity-based compliant body with claw-based connection mechanisms. Each robot can manipulate and locomote independently, and multiple robots can self-reconfigure into different morphologies (e.g., chains, loops, branches) for cooperative manipulation and locomotion. We demonstrate the robots' capability across diverse tasks and environments, including coordinated object manipulation and transport, multimodal locomotion, and loco-manipulation in real-world scenarios. These results lay a foundation for adaptable and multifunctional robotic collectives, with broad potential applications in manufacturing, space exploration, and search-and-rescue operations.

0.33

Readiness Barrier Functions: Forward-Invariant Control Authority for Overactuated Multirotor Allocation

cs.RO eess.SYmath.OC ·2026-08-17 ·Giuseppe Silano
similarity 0.53
Abstract · This work has been submitted to the IEEE for possible publication

Allocation schemes that greedily maximize a readiness metric over the actuator fiber bundle of an overactuated multirotor produce commands that jump between disconnected optimal strata, demanding actuator rates no motor can deliver; effort-minimizing schemes are continuous but cannot guarantee that wrench-rate authority stays above any certified level. We reconcile the two by treating authority as a forward-invariant quantity: a control barrier function on the log-determinant of the drag-aware actuator-authority co-metric, enforced at torque level by a quadratic program in the allocation null space. A single design inequality renders the certified set compact and strictly interior to the actuator box, with the readiness cost of any rotor deactivation given in closed form as $\ln(n/(n{-}m))$ for symmetric designs. An explicit alignment ratio states when tracking can stay exact, otherwise the wrench error is bounded by $\mathcal{O}(ρ^{-1/2})$, and a robust variant handles motor-parameter uncertainty with a closed-form floor shift independent of the airframe matrix. On a hexarotor and a fully-actuated octorotor the closed-form gap matches simulation to machine precision. Over $300$ randomized missions, greedy maximization violates the certified floor in up to $51\%$ of authority-scarce missions, while the proposed filter never leaves the certified set and, in the hardest moment reversal, commits a $79\times$ smaller wrench error. The robust variant holds the floor on all $150$ perturbed plants. A high-fidelity simulation with measured propeller and motor data shows that the floor holds under unmodeled aerodynamics, electrical limits, and delay, and where it stops applying.

0.55

BiPathCPG: A Novel Load-Sharing Design Architecture for Compound Planetary Gearboxes

cs.RO ·2026-11-18 ·Deepak Kapa, Aman Singh, Saketh Vegesna, Suryank Joshi, Mayank Goswami +1 more
top venuecode/data similarity 0.52
Abstract · 8 pages, 6 figures, 2 tables. Project page: https://deepak-kapa.github.io/PancakeActuator/ Accepted to IEEE Robotics and Automation Letters …

Quasi-Direct Drive (QDD) actuators are widely used in legged robots due to their low reflected inertia, high backdrivability, and high torque density, commonly employing planetary or cycloidal gearboxes. Single-stage planetary gearboxes offer high efficiency but limited torque density; multi-stage designs improve torque density at the cost of efficiency; and cycloidal gearboxes provide high stiffness but suffer from torque ripple. Compound Planetary Gearboxes (CPG) offer a compromise, but conventional designs result in increased actuator width, mass, and reduced torsional stiffness in 3D-printed actuators. This paper proposes the BiPath Compound Planetary Gearbox (BiPathCPG), a novel architecture that introduces an idle second-stage sun gear and load-sharing second-stage planets within the otherwise unused space of a conventional CPG to simultaneously improve stiffness, reduce actuator width, and reduce mass. An optimization framework computes BiPathCPG parameters for a given motor and target gear ratio. The architecture is validated through a 3D-printed proof-of-concept actuator design, benchmarked against a conventional CPG using custom-built test rigs. The BiPathCPG achieves a torsional stiffness of 1394 Nm/rad, a 1.70x improvement over the conventional CPG, with a 32% reduction in backlash, 25 g lower mass, and approximately 6.4 mm reduction in axial width, while achieving a peak stall torque of 36.49 Nm.

0.68

SHAFT: A Slack-Compensating, Helical-Buckling-Attenuating Flexible-Shaft Transmission for Lightweight Multi-DoF Manipulation

cs.RO ·2026-09-19 ·Tomoya Takahashi, Moses Gladson Selvamuthu, Richiro Tadakuma, Kazutoshi Tanaka
published similarity 0.51
Abstract · 9 pages, 14 figures, submitted as proceedings of IROS2026

Lightweight and slim manipulators enable safe operation in human living environments. Proximal actuation using remote transmission mechanisms, such as wire-driven or Bowden cables, effectively reduces inertia and arm size by relocating motors near the base and transmitting torque to distal joints. Existing approaches either increase mass through additional components, such as pulleys for direction changes, or suffer from reduced transmission efficiency due to friction losses. Flexible shaft transmission avoids both mass increase and excessive friction losses, but faces increasing angular transmission error due to helical buckling caused by slack generated at joint bending. To address this problem, we propose SHAFT: a Slack-compensating, Helical-buckling-Attenuating Flexible- shaft Transmission mechanism. This mechanism compensates for slack through a proximal tensioner, improving the angular transmission error and efficiency of flexible shaft transmission without increasing the moving mass of the arm section. In a transmission path containing four 90-degree bends, the proposed mechanism demonstrated approximately 30% higher efficiency and approximately 65% lower angular transmission error compared to a flexible shaft transmission without a tensioner. Using this mechanism, we fabricated a 6-Degree-of-Freedom (DoF) arm with a 1-DoF gripper manipulator consisting of a rotary module housing motors with a tensioner, and a 280 g weight for the arm module. The proposed manipulator represents a novel remote actuation system for achieving lightweight construction with high efficiency, contributing to the acceleration of safe robot deployment in human environments.

0.42