CS Paper Radar

Orientation Diversity Provably Increases the Angular-Domain Rank of 3D MIMO Arrays

Samer Henry, Elvino Sousa

cs.IT ·submitted 2026-10-16 20:50 UTC · v1
publishedtheory

Abstract

Movable and rotatable-antenna systems treat element placement as a design resource, but the supporting theory is largely position-only. We prove that element orientation is an effective spatial resource in its own right, complementary to position. For collinear or coplanar arrays, the angular-domain rank is capped by the number of projection-ambiguity classes of the scattering directions, for every common element orientation and pattern. Orientation-diverse elements with sufficiently rich analytic patterns restore the maximal rank min(N,L) for almost every orientation draw. A closed-form correlation expression, strictly monotone in orientation spread under isotropic scattering, quantifies the gain within the scalar-pattern model, and Monte Carlo simulations corroborate the exact-rank and capacity behavior.

Comment
5 pages, 4 figures. Accepted for publication in IEEE Wireless Communications Letters

Closest papers

Nearest neighbours by meaning across the whole index.

Sparse Rotatable Arrays (SRA): Unifying Array Aperture and Antenna Directivity for Wireless Communications

cs.IT ·2026-08-12 ·Ailing Zheng, Qingqing Wu, Xiyuan Liu, Wen Chen
similarity 0.55
Abstract

Sparse rotatable array (SRA) is a novel reconfigurable antenna architecture that jointly exploits sparse aperture configuration and antenna directivity to enhance spatial resolution for future wireless communications. Specifically, SRA activates a subset of rotatable antennas over a large candidate aperture and adjusts their boresight directions, thereby creating a directionally selective sparse aperture with reduced hardware requirements and enhanced spatial flexibility. In this paper, we investigate an SRA-aided multi-group communication system, where users are organized into spatial groups with different service requirements. We develop a group-aware SRA design framework by jointly optimizing the sparse-aperture allocation, RA orientations, and transmit beamforming to maximize the weighted max-min signal-to-interference-plus-noise ratio (SINR). Then, we characterize the operating principles of SRA and reveal that sparse aperture improves spatial resolution by enlarging the effective array aperture, while antenna directivity suppresses inter-group coupling through directional control, thereby enabling simplified group-wise beamforming structures. Guided by these insights, we develop a structured low-complexity alternating optimization algorithm that embeds a closed-form projected group-center RA orientation rule into the sparse-aperture allocation and beamforming design. The proposed algorithm combines analysis-guided initialization, sampled multi-start antenna-allocation search, and bisection-based second-order cone programming for beamforming. Numerical results show that the proposed SRA design closely approaches fully-shared SRA benchmarks and significantly outperforms compact subarray and omni sparse-array schemes.

0.04

A Beam-Switched Sparse Circular Array for Passive Wi-Fi Sensing

eess.SP cs.IT ·2026-11-02 ·Yang Chen, Riccardo Bersan, Daniele Piazza, Stefano Savazzi, Michele D'Amico
similarity 0.55
Abstract · 5 pages, 8 figures. Submitted to EuCAP 2027

Wi-Fi sensing applications require unambiguous angle-of-arrival (AoA) estimation over the full azimuth plane. Uniform circular arrays (UCAs) are shown to remove this ambiguity, but deploying the four RF chains typically available on commercial Wi-Fi chipsets into a sparse layout suffers from spatial undersampling. Such undersampling produces strong grating lobes. To overcome this hardware bottleneck, we first establish a generalized array manifold incorporating element radiation patterns, revealing the suitability and degradation mechanisms of directional UCAs. Then we propose an angularly staggered beam-switched UCA architecture that leverages the spatial complementarity. Numerical evaluations demonstrate that the proposed scheme effectively mitigates grating-lobe ambiguities without increasing the number of RF chains, significantly reducing AoA estimation outliers and improving omnidirectional tracking performance.

0.25

Movable-Antenna-Empowered ISAC: 3D Ambiguity Function Analysis, Waveform Design and Antenna Position Optimization

eess.SP ·2026-09-28 ·Tianqi Mao, Yuanshuo Gang, Guangyao Liu, Shiqi Cui, Ying Sun +3 more
similarity 0.54
Abstract · 13 pages, 9 figures, submitted to IEEE for possible publication

Multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) provides abundant spatial and time-frequency degrees of freedom for integrated sensing and communication (ISAC), while movable-antennas (MAs) further introduce reconfigurable spatial freedom through array geometry adjustment. However, how the array geometry and the MIMO-OFDM waveform design jointly influence the sensing performance, i.e., the three dimensional (3D) ambiguity function property, remains insufficiently understood. Against this background, we investigate MA-empowered ISAC design under the MIMO-OFDM architecture, where the radio-frequency (RF) antenna positions and the baseband waveform are co-designed with symbol-level precoding (SLP) philosophy. The discrete periodic angle-range-Doppler ambiguity function is firstly derived for the MA-enabled ISAC framework, revealing its interesting features with respect to the waveform matrix rank. Specifically, it is proved that a rank-one waveform yields a 3D ambiguity function that is separable into angular and range-Doppler components. On the other hand, a higher-rank waveform combines multiple spatial components with angle-dependent weights, allowing the range-Doppler ambiguity function to vary across candidate angles and enabling the MA positions to further shape the 3D ambiguity function. Based on the aforementioned analysis, a 3D integrated sidelobe level ratio (ISLR) is defined, a joint optimization problem of the MA positions and the SLP waveform matrix is formulated, and a penalty dual decomposition based alternating optimization algorithm is developed. For the radar-only case, the existence of a rank-one globally optimal waveform is established, which reduces the original high-dimensional waveform optimization to a low-dimensional joint design of the spatial beam and MA positions.

0.41

Fluid Antenna Array-Enabled Near-Field ISAC: Joint Port Position Optimization and Transmit Beamforming Design

cs.IT ·2026-11-02 ·Wangqi Shi, Zhentian Zhang, Hao Jiang, Zaichen Zhang, Kin-Fai Tong
similarity 0.54
Abstract

Fluid antenna systems (FASs) have shown that activating a single port from a densely packed antenna array can yield spatial diversity comparable to that of tens of independent antennas, a property that has substantially improved communication reliability and efficiency. The fluid antenna array (FAA) extends this concept to multi-port configurations while avoiding complex multi-dimensional spatial correlation, and offers significant geometrical flexibility under a finite aperture and a limited port budget. These attributes motivate environment-adaptive array geometry for sensing in integrated sensing and communication (ISAC) systems. Although this flexibility enables adaptive array geometries that exploit near-field distance-angle information, improving multi-parameter target estimation under communication and deployment constraints remains challenging. In this paper, we propose a planar FAA-assisted near-field ISAC framework for multiuser communication and target sensing. Specifically, we derive the Fisher information matrix (FIM) and the corresponding Cramér-Rao bound (CRB) for the joint estimation of target range, zenith angle, azimuth angle, and radial velocity. Based on the derived CRB, we jointly optimize the FAA port positions and transmit beamforming to improve sensing accuracy while satisfying communication signal-to-interference-plus-noise ratio (SINR), transmit power, and physical deployment constraints. To solve the resulting non-convex problem, we develop a two-stage alternating optimization algorithm, in which transmit beamforming is optimized through semidefinite relaxation (SDR), while FAA port positions are successively optimized through discrete search and continuous refinement. Simulation results indicate that the proposed algorithm achieves favorable sensing performance while maintaining a reasonable computational cost.

0.16

Flexible Beamforming via Fluid Antenna Array: From Discrete to Continuous Array

cs.IT ·2026-10-25 ·Jingyuan Xu, Yuanhui Wu, Zhentian Zhang, Zaichen Zhang, Tuo Wu +4 more
similarity 0.54
Abstract · 12 pages, 9 figures. Submitted to IEEE Transactions on Wireless Communications

Fluid antenna arrays (FAAs) reconfigure their effective aperture by activating radiation ports from a dense set of candidate positions within a finite physical region, thereby offering geometry diversity beyond conventional fixed arrays. This paper studies arbitrary-direction far-field beam synthesis with a planar FAA. Since a fixed array adapts its beamforming weights on a predetermined spatial sampling structure, its ability to match desired beam patterns is limited when both the aperture and the number of active elements are constrained. To exploit the geometry diversity of the FAA, we propose a coarse-to-fine scheme that couples discrete port selection with continuous joint refinement. In the coarse stage, a fast Fourier transform (FFT) based phase retrieval step converts the amplitude-only beam specification into an aperture-compatible complex target, after which an FFT-tailored greedy method selects the active ports and least squares initializes their complex weights. In the fine stage, a projected adaptive moment estimation procedure jointly refines the continuous port positions and beamforming weights while enforcing the minimum interelement spacing. For the evaluated two-beam configuration, the proposed scheme increases the mainlobe energy fraction from 35.73% to 48.92% and reduces the peak sidelobe level from -2.30 dB to -3.83 dB relative to a fixed array with the same aperture and active-port count.

0.30

Off-Grid Position Optimization under Mutual Coupling in Fluid Antenna Arrays

cs.IT ·2026-08-16 ·Jingyuan Xu, Jian Dang, Zaichen Zhang
similarity 0.54
Abstract

Fluid antenna arrays exploit continuous antenna repositioning within a finite aperture to provide geometry diversity beyond grid-constrained port selection. Every displacement, however, changes both the radiation response and the multiport mutual-impedance network, coupling geometry optimization with the source-voltage constraint. This paper develops an electromagnetic-aware (EM-aware) beamforming framework for planar fluid antenna arrays. Phase retrieval converts an amplitude-only shaped-beam specification into an aperture-compatible complex target, and an EM-aware orthogonal matching pursuit (OMP) method selects grid-constrained initial antenna positions. Continuous refinement then alternates exact voltage-constrained current optimization with movement-constrained projected adaptive moment estimation (Adam) updates of all physical antenna positions. Across independently perturbed symmetric dual-beam targets, the proposed method consistently improves the average mainlobe signal-to-noise ratio (SNR) and reduces the peak sidelobe level (PSLL) over a uniform array and discrete port selection.

0.32

MSE Minimization for Movable Antenna Enhanced Wireless Sensing via Array Geometry Optimization

cs.IT ·2026-10-10 ·Wenrong Chen, Lipeng Zhu, Wenyan Ma, Zhi Chen, Rui Zhang
similarity 0.53
Abstract

This paper develops adaptive movable-antenna (MA) array structures to enhance wireless sensing performance under arbitrary SNR conditions, using the AoA estimation MSE as the sensing metric. Due to the presence of strong sidelobes in the ambiguity function of sparse MA arrays, the classical CRB of AoA estimation MSE fails to characterize the true MSE in the low and medium SNR regimes, rendering CRB-optimized antenna position vector designs suboptimal for MA-enabled sensing. We derive a deterministic MSE approximation that captures the local estimation error within the mainlobe of the ambiguity function and the outlier error induced by sidelobes, providing a tractable and accurate optimization objective. We then propose three adaptive MA structures that are tailored to different hardware and computational requirements. For systems with fully independent motors, a movable free array is optimized by a two-stage greedy algorithm, which approaches the performance of the globally optimal exhaustive search but with lower computational complexity. Halving the required motors, a movable nested array fixes the dense inner subarray and adjusts only the outer-subarray spacing, reducing the optimization to a one-dimensional search. As the most hardware-efficient design, a movable twin array is proposed to adjust the inter-subarray spacing only with a single motor, while still achieving significant MSE reduction over fixed array geometries. Numerical results show that the derived approximation closely matches the true MSE compared with existing performance bounds, and that the proposed structures outperform the CRB-optimized designs by orders of magnitude in MSE across the tested low-to-medium SNR range. Moreover, it reveals that in the low-SNR regime, APV reconfiguration is more effective for improving estimation accuracy than simply increasing the number of fixed antennas.

0.11

Array Rotation in Near-Field ISAC: Communication, Detection, and Estimation Under Low-Complexity Transmit Architectures

eess.SP cs.IT ·2026-10-22 ·Marziyeh Soltani, Mark F. Flanagan
similarity 0.53
Abstract

This paper studies near-field integrated sensing and communication (ISAC) with a rotatable base-station array under an exact spherical-wave propagation model. For a general transmit covariance, we derive a Cramér--Rao bound (CRB) decomposition that separates target-side geometry from transmit-covariance-dependent terms. We then specialize the framework to two representative low-complexity architectures: a single-stream superposition architecture, and a dual-waveform split architecture design. We characterize the communication-, detection-, and estimation-optimal rotations for each architecture using the exact finite-array model. In addition, we show how a second-order approximation yields compact approximate expressions for the optimal rotation angles. We also study uncertainty in the target state used for beamforming design through a correlated Gaussian perturbation model, and derive approximations of the optimal robust rotation angles for target sensing and detection. The analysis shows that the two architectures behave differently under rotation: the single-stream design can align communication and detection tasks, whereas the dual-waveform design exhibits a direct communication--detection tradeoff and can incur a larger communication loss when sensing is prioritized. Numerical results show clear gains over a fixed array orientation, especially for range estimation, and close agreement between the approximate and exact rotation choices. Detection is less affected by target-state errors than estimation in the considered cases.

0.11